共查询到20条相似文献，搜索用时 15 毫秒
1.
Temperature and Water Vapor Weighting Functions from Radiative Transfer Equation with Surface Emissivity and Solar Reflectivity 总被引：8，自引：2，他引：8
Linearization of Radiative Transfer Equation (RTE) is the key step in physical retrieval of atmospheric temperature and moisture profiles from InfRared (IR) sounder observations. In this paper, the successive forms of temperature and water vapor mixing ratio component weighting functions are derived by applying one term variation method to RTE with surface emissivity and solar reflectivity contained. Retrivals of temperature and water vapor mixing ratio profiles from simulated Atmospheric Infrared Sounder (AIRS) observations with surface emissivity and solar reflectivity are presented. 相似文献
2.
利用AIRS卫星资料反演大气廓线Ⅰ.特征向量统计反演法 总被引：2，自引：0，他引：2
官莉 《南京气象学院学报》2006,29(6):756-761
引进美国威斯康星大学的IMAPP（International MODIS／AIRS Preprocessing Package）软件包，介绍了利用高光谱分辨率大气红外探测器AIRS（Atmospheric Infrared Sounder）观测辐射值，用特征向量统计法反演大气温度、湿度等垂直廓线的算法，采用亮度温度分类和扫描角分类回归后，减小了反演误差。并将其应用到中国地区，通过与无线电探空值及欧洲中期天气预报中心ECMWF（European Center of Medium-range Weather Forecasts）客观分析场的比较，结果表明：该方法所获得的温度、水汽反演结果与探空观测及ECMWF大气廓线分布一致，且AIRS因其高光谱分辨率（即高垂直空间分辨率）显示了精细的大气结构。 相似文献
3.
1. IntroductionThe development of global climate and weathermodels requires accurate monitoring of atmospherictemperature and moisture profiles, as well as the con-tents of trace gases and aerosols. It is quite difficultto monitor continuously these parameters on a globalscale.Until recently. AIRS (Atmospheric InfraredSounder) offers a new opportunity to improve globalmonitoring of temperature, moisture, and ozone distri-butions and changes therein. The high spectral resolu-tion (v/Δv ? 12… 相似文献
4.
介绍并验证了一种快速、精确地计算Jacobian的解析方法(辐射传输方程的线性化,简称LR方法),将其结果与NAST-I真正的线性模式及数值方法(差分方法)的Jacobian值进行比较。结果表明,这种解析算法不仅快速、精确,而且独立于辐射传输方程,在有效Jacobian计算中只需要输入大气透过率,可适用于任何垂直探测器权重函数的计算。 相似文献
5.
WU Xuebao LI Jun ZHANG Fengying ZHAN Wenjian ZHU Yuanjing 《Acta Meteorologica Sinica》2004,18(2):129-140
The Advanced TIROS-N Operational Vertical Sounder(ATOVS) measurements are used to generate the atmospheric parameters,such as temperature and moisture profiles,under both clear and cloudy situations.This paper describes briefly the nonlinear iterative physical retrieval method.By using this retrieval scheme,an experiment has been carried out to retrieve the moisture profiles from ATOVS measurements on the NOAA-16 satellite for July of 2002.ATOVS profile retrieval results are evaluated by root mean square(RMS) differences with respect to RAdiosonde OBservation(RAOB) profiles.The accuracy of the retrieval is about 15%-23% for the relative humidity profile in this study. 相似文献
6.
We present a comparison between several methods used to reconstruct fluxes and vertical profiles of wind, temperature and
humidity from measurements at two levels in the atmospheric surface layer for different practical applications. An analytical
method and an iterative method are tested by evaluating the quality of estimations of surface fluxes from detailed field measurements
obtained during a campaign on the site of Lannemezan in the south-west of France. The iterative method yields better results,
but the analytical one can give results of the same level of accuracy provided that specific constants in its formulation
are modified. Then these techniques are applied to wind and temperature reconstruction for an experiment dedicated to wind
power estimates over flat terrain. If turbulent fluxes are not needed, a simple power law appears to be sufficient, as the
method based on Monin–Obukhov theory does not improve the accuracy of the vertical profile reconstruction. 相似文献
7.
ABSTRACT Satellite-based observations provide great opportunities for improving weather forecasting. Physical retrieval of atmo spheric profiles from satellite observations is sensitive to the uncertainty of the first guess and other factors. In order to improve the accuracy of the physical retrieval, an ensemble methodology was developed with an emphasis on perturbing the first guess. In the methodology, a normal probability density function （PDF） is used to select the optimal profile from the ensemble retrievals. The ensemble retrieval algorithm contains four steps： （1） regression retrieval for original first guess; （2） perturbation of the original first guess to generate new first guesses （ensemble first guesses）; （3） using the ensemble first guesses and nonlinear iterative physical retrieval to generate ensemble physical results; and （4） the final optimal profile is selected from the ensemble physical results by using PDE Temperature eigenvectors （EVs） were used to generate the pertur- bation and generate the ensemble first guess. Compared with the regular temperature profile retrievals from the Atmospheric InfraRed Sounder （AIRS）, the ensemble retrievals RMSE of temperature profiles selected by the PDF was reduced between 150 and 320 hPa and below 400 hPa, with a maximum improvement of 0.3 K at 400 hPa. The bias was also reduced in many layers, with a maximum improvement of 0.69 K at 460 hPa. The combined optimal （CombOpt） profile and a mean optimal （MeanOpt） profile of all ensemble physical results were improved below 150 hPa. The MeanOpt profile was better than the CombOpt profile, and was regarded as the final optimal （FinOpt） profile. This study lays the foundation for improving temperature retrievals from hyper-spectral infrared radiance measurements. 相似文献
8.
In the present reported study, the vertical distributions of local atmospheric refractivity were retrieved from ground- based GPS observations at low elevation angles. An improved optimization method was implemented at altitudes of 0-10 km to search for a best-fit refractivity profile that resulted in atmospheric delays most similar to the delays calculated from the observations. A ray-tracing model was used to simulate neutral atmospheric delays corresponding to a given refractivity profile. We initially performed a ＂theoretical retrieval＂, in which no observation data were involved, to verify the optimization method. A statistical relative error of this ＂theoretical retrieval＂ （-2% to 2%） indicated that such a retrieval is effective. In a practical retrieval, observations were obtained using a dual-frequency GPS receiver, and its initial value was provided by CIRA86aQ_UoG data. The statistical relative errors of the practical retrieval range from -3% to 5% were compared with co-located radiosonde measurements, Results clearly revealed diurnal variations in local refractivity prc,files, The results also suggest that the general vertical distribution of refractivity can be derived with a high temporal resolution. However, further study is needed to describe the vertical refractivity gradient clearly. 相似文献
9.
ＴｈｅＣａｐａｂｉｌｉｔｙｏｆＡｔｍｏｓｐｈｅｒｉｃＰｒｏｆｉｌｅＲｅｔｒｉｅｖａｌｆｒｏｍＳａｔｅｌｌｉｔｅＨｉｇｈＲｅｓｏｌｕｔｉｏｎＩｎｆｒａｒｅｄＳｏｕｎｄｅｒＲａｄｉａｎｃｅｓＬｉＪｕｎ（李俊）（Ｃｏｏｐｅｒａｔｉｖｅｉｎｓｔｉｔｕｔｅｆｏ... 相似文献
10.
Validation of the Atmospheric Infrared Sounder Retrieval Products over China and Their Application in Numerical Mode 
下载免费PDF全文
下载免费PDF全文 The atmospheric infrared sounder (AIRS) instrument onboard Aqua Satellite is a high spectral resolution infrared sounder. In recent years, AIRS has gradually become the primary method of atmospheric vertical observations. To examine the validation of AIRS retrieval products (V3.0) over China, the AIRS surface air temperature retrievals were compared with the ground observations obtained from 540 meteorological stations in July 2004 and January 2005, respectively. The sources of errors were considerably discussed. Based on the error analysis, the AIRS retrieved surface air temperature products were systemically corrected. Moreover, the AIRS temperature and humidity profile retrievals were compared with T213 numerical forecasting products. Because T213 forecasting products are not the actual atmospheric states,to further verify the validation, the AIRS temperature and humidity profile products were assimilated into the MM5 model through the analysis nudging. In this paper, the case on February 14, 2005 in North China was simulated in detail. Then, we investigated the effects of AIRS retrievals on snowfall, humidity field,vertical velocity field, divergence field, and cloud microphysical processes. The major results are: (1) the errors of AIRS retrieved surface air temperature products are largely systematic deviations, for which the influences of terrain altitude and surface types are the major reasons; (2) the differences between the AIRS atmospheric profile retrievals and T213 numerical prediction products in temperature are generally less than
2 K, the differences in relative humidity are generally less than 25%; and (3) the AIRS temperature and humidity retrieval products can adjust the model initial field, and thus can improve the capacity of snowfall simulation to some extent. 相似文献
11.
12.
The atmospheric infrared sounder (AIRS) instrument onboard Aqua Satellite is a high spectral resolution infrared sounder. In recent years, AIRS has gradually become the primary method of atmospheric vertical observations. To examine the validation of AIRS retrieval products (V3.0) over China, the AIRS surface air temperature retrievals were compared with the ground observations obtained from 540 meteorological stations in July 2004 and January 2005, respectively. The sources of errors were considerably discussed. Based on the error analysis, the AIRS retrieved surface air temperature products were systemi-cally corrected. Moreover, the AIRS temperature and humidity profile retrievals were compared with T213 numerical forecasting products. Because T213 forecasting products are not the actual atmospheric states, to further verify the validation, the AIRS temperature and humidity profile products were assimilated into the MM5 model through the analysis nudging. In this paper, the case on February 14, 2005 in North China was simulated in detail. Then, we investigated the effects of AIRS retrievals on snowfall, humidity field, vertical velocity field, divergence field, and cloud microphysical processes. The major results are: (1) the errors of AIRS retrieved surface air temperature products are largely systematic deviations, for which the influences of terrain altitude and surface types are the major reasons; (2) the differences between the AIRS atmospheric profile retrievals and T213 numerical prediction products in temperature are generally less than 2 K, the differences in relative humidity are generally less than 25%; and (3) the AIRS temperature and humidity retrieval products can adjust the model initial field, and thus can improve the capacity of snowfall simulation to some extent. 相似文献
13.
14.
I. IntroductionOzone p1ays a very 1mportant ro1e in globa1 climate change. This is particularly true inthe stratosphere, where ultra--v1olet solar radiation is strongly absorbed by ozone, leading tosubstantlal change in the earths atmospheric thermal, physical and chemical structure. Al-though the troposphere contains only about l0% of the total atmospheric ozone, the varia-tlon of tropospheric ozone may have more significant cllmatic effect than stratospheric ozoneon the earth's surface temP… 相似文献
15.
Anthropogenic climate change over the Mediterranean region simulated by a global variable resolution model 总被引：1，自引：2，他引：1
Two 30-year simulations corresponding to 1960-1989 and 2070-2099 have been performed with a variable resolution atmospheric model. The model has a maximum horizontal resolution of 0.5° over the Mediterranean Sea. Simulations are driven by IPCC-B2 scenario radiative forcing. Sea surface temperatures (SSTs) are prescribed from monthly observations for the present climate simulation, and from a blend of observations and coupled simulations for the scenario. Another pair of forced atmospheric simulations has been run under these forcings with the same uniform low resolution as the coupled model. Comparisons with observations show that the variable resolution model realistically reproduces the main climate characteristics of the Mediterranean region. At a global scale, changes in latitudinal temperature profiles are similar for the forced and coupled models, justifying the time-slice approach. The 2 m temperature and precipitation responses predict a warming and drying of the Mediterranean region. A comparison with the coupled simulation and forced low-resolution simulation shows that this pattern is robust. The decrease in mean precipitation is associated with a significant decrease in soil wetness, and could involve considerable impact on water resources around the Mediterranean basin. 相似文献
16.
Simultaneous Non-linear Retrieval of Atmospheric Temperature and Absorbing Constituent Profiles from Satellite Infrared Sounder Radiances 总被引：4，自引：3，他引：1
Based on Zeng’s theory (1974), a successive linearized form of radiative transfer equation (RTE) is derived for simultaneous retrieval of atmospheric temperature and absorbing constituent profiles from satellite infrared observa-tions. It contains the temperature component weighting function and absorbing constituent (H2O, O3, CH4 etc.) com-ponent weighting functions. All these weighting functions reach maximum at their own “optimum information levels”, and make the remote sensing equations well-conditional. Then the atmospheric profiles are derived by Newton’s non-linear iteration method. Experiments of retrieval from both TIROS-N operational High Resolution Infrared Sounder (HIRS) and the simulated Atmospheric infRared Sounder (AIRS) show an significant improvement. 相似文献
17.
A wind-tunnel simulation of an atmospheric boundary layer, artificially thickened as is often used in neutral flow wind-loading studies, has been investigated for weakly unstable stratification, including the effect of an overlying inversion. Rather than using a uniform inlet temperature profile, the inlet profile was adjusted iteratively by using measured downstream profiles. It was found that three cycles are sufficient for there to be no significant further change in profiles of temperature and other quantities. Development to nearly horizontally-homogeneous flow took a longer distance than in the neutral case because the simulated layer was deeper and therefore the length scales larger. Comparisons show first-order and second-order moments quantities are substantially larger than given by ‘standard forms’ in the mixed layer but are close in the surface layer. Modified functions, obtained by matching one to the other, are suggested that amount to an interpolation in the mixed layer between the strongly unstable and the weakly unstable cases. 相似文献
18.
针对在研仪器——大气辐射超高光谱探测仪的临边探测模式,模拟计算了大气温度和水汽的权重函数。以此为基础,利用信息量和权重函数线性化方法,结合仪器的可探测亮温阈值0.3 K,计算并分析6种大气状态下,大气温度和水汽混合比廓线在不同反演精度条件下可获得的光谱通道数,在满足最佳光谱通道数200的要求下,理论上预估其反演精度。温度廓线整体反演精度为0.6 K,水汽混合比廓线反演精度可达到5%,但热带大气在16~20 km高度的水汽廓线反演精度仅为10%。反演精度预估,仅提供了一种全面认识仪器性能的方法,精度的确定还有赖于真实探测数据的获取和反演方法。 相似文献
19.
The Microwave Temperature Sounder-Ⅱ(MWTS-Ⅱ) and Microwave Humidity and Temperature Sounder(MWHTS) onboard the Fengyun-3 C(FY-3 C) satellite can be used to detect atmospheric temperature profiles. The MWTS-II has 13 temperature sounding channels around the 60 GHz oxygen absorption band and the MWHTS has 8 temperature sounding channels around the 118.75 GHz oxygen absorption line. The data quality of the observed brightness temperatures can be evaluated using atmospheric temperature retrievals from the MWTS-Ⅱ and MWHTS observations. Here, the bias characteristics and corrections of the observed brightness temperatures are described. The information contents of observations are calculated, and the retrieved atmospheric temperature profiles are compared using a neural network(NN) retrieval algorithm and a one-dimensional variational inversion(1 D-var) retrieval algorithm. The retrieval results from the NN algorithm show that the accuracy of the MWTS-Ⅱ retrieval is higher than that of the MWHTS retrieval, which is consistent with the results of the radiometric information analysis. The retrieval results from the 1 D-var algorithm show that the accuracy of MWTS-Ⅱ retrieval is similar to that of the MWHTS retrieval at the levels from 850-1,000 h Pa, is lower than that of the MWHTS retrieval at the levels from 650-850 h Pa and 125-300 h Pa, and is higher than that of MWHTS at the other levels. A comparison of the retrieved atmospheric temperature using these satellite observations provides a reference value for assessing the accuracy of atmospheric temperature detection at the 60 GHz oxygen band and 118.75 GHz oxygen line. In addition, based on the comparison of the retrieval results, an optimized combination method is proposed using a branch and bound algorithm for the NN retrieval algorithm, which combines the observations from both the MWTS-Ⅱand MWHTS instruments to retrieve the atmospheric temperature profiles. The results show that the optimal combination can further improve the accuracy of MWTS-Ⅱ retrieval and enhance the detection accuracy of atmospheric temperatures near the surface. 相似文献
20.
Bernd Schönwald 《Boundary-Layer Meteorology》1978,15(4):453-464
A useful method for remote sensing of vertical temperature profiles in the atmospheric boundary layer is described. From angular measurements of brightness temperature at 58 GHz, profiles have been inferred up to an altitude of 700 m. Calculations were done with an iterative inversion procedure (Smith et al., 1972) using Twomey-type smoothing (Twomey, 1963). It is shown how an initial-guess profile can be directly derived from the radiation measurements using, a nomogram. 相似文献