首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 269 毫秒
1.
To assist validation of the experimental data of urban pollution dispersion, the effect of an isolated building on the flow and gaseous diffusion in the wake region have been investigated numerically in the neutrally stratified rough-walled turbulent boundary layer. Numerical studies were carried out using Computational Fluid Dynamics (CFD) models. The CFD models used for the simulation were based on the steady-state Reynolds-Average Navier-Stoke equations (RANS) with κ-ε turbulence models; standard κ-ε and RNG κ-ε models. Inlet conditions and boundary conditions were specified numerically to the best information available for each fluid modeling simulation. A gas pollutant was emitted from a point source within the recirculation cavity behind the building model. The accuracy of these simulations was examined by comparing the predicted results with wind tunnel experimental data. It was confirmed that simulation using the model accurately reproduces the velocity and concentration diffusion fields with a fine-mish resolution in the near wake region. Results indicated that there is a good agreement between the numerical simulation and the wind tunnel experiment for both wind flow and concentration diffusion. The results of this work can help to improve the understanding of mechanisms of and simulation of pollutant transport in an urban environment.  相似文献   

2.
The simulation performance over complex building clusters of a wind simulation model(Wind Information Field Fast Analysis model, WIFFA) in a micro-scale air pollutant dispersion model system(Urban Microscale Air Pollution dispersion Simulation model, UMAPS) is evaluated using various wind tunnel experimental data including the CEDVAL(Compilation of Experimental Data for Validation of Micro-Scale Dispersion Models) wind tunnel experiment data and the NJU-FZ experiment data(Nanjing University-Fang Zhuang neighborhood wind tunnel experiment data). The results show that the wind model can reproduce the vortexes triggered by urban buildings well, and the flow patterns in urban street canyons and building clusters can also be represented. Due to the complex shapes of buildings and their distributions, the simulation deviations/discrepancies from the measurements are usually caused by the simplification of the building shapes and the determination of the key zone sizes. The computational efficiencies of different cases are also discussed in this paper. The model has a high computational efficiency compared to traditional numerical models that solve the Navier–Stokes equations, and can produce very high-resolution(1–5 m) wind fields of a complex neighborhood scale urban building canopy(~ 1 km ×1km) in less than 3 min when run on a personal computer.  相似文献   

3.
The wind finding equations currently used to retrieve horizontal winds from Global Positioning System dropwindsonde wind measurements are derived based on a point object model in which the drag coefficient of the dropwindsonde is assumed to be a constant. The wind tunnel tests performed as part of this study showed, however, that the dropwindsonde aerodynamic coefficients vary appreciably with angles of attack. To investigate the impact of this finding, the dropwindsonde motion in a pseudo-stochastic wind field has been simulated using a motion model more sophisticated than the point object model. The results showed that, although the constant drag coefficient assumption is not supported by the wind tunnel test results, the wind finding equations still correctly calculate both the mean and the turbulence intensity profiles. In addition, a revised method to calculate the vertical wind was proposed based on the derivation of the improved motion model, which enhanced the accuracy of vertical wind estimates by including the real-time dropwindsonde drag coefficient and the dropwindsonde vertical acceleration into calculation.  相似文献   

4.
对具有复杂下垫面的小区精细化风环境进行数值模拟是当前城市气象研究的热点,而针对具有复杂地形的山地型城市(如重庆)的研究还比较匮乏。本文采用能显式分辨下垫面陡峭地形和复杂建筑物的计算流体力学(CFD)模式对重庆市渝北区龙湖社区气候态下的精细化风环境进行高分辨率的数值模拟。结果表明,下垫面能显著调节小区内风场的分布,风速大值区主要出现在九龙湖等开阔区域以及与中尺度背景入流方向一致的街道中。在夏季,小区整体风场以东南风为主,而其他3个季节则以偏东风为主。4个季节中,夏季小区内的风速最大,平均风速为0.3 m/s左右,局地能出现大于背景风的风速,可达0.8 m/s;其他3个季节的风速则较弱,区域平均的风速在0.2 m/s左右。不同的建筑物布局对局地风环境的影响也不同:单个孤立高层建筑迎风面的近地面存在明显地绕流,局地风速有所增加,而在背风面则形成尾流区,水平风速较低;在低矮分散的建筑群,建筑物的整体高度不高,区域内流场相对来说比较一致,风速较大,有利于小区的通风;在密集高层建筑群内,由于建筑物群本身的布局比较封闭,加之不同建筑物的环流场存在相互干扰及影响,使得小区近地面风速几乎为零,不利于小区通风和污染物扩散。建筑物的这些影响在城市冠层内尤为明显,高度越高这种影响越弱。  相似文献   

5.
地面强风可直接造成人员伤亡和经济损失,严重影响出行安全、工农业生产等社会秩序。强风的发生与天气系统和复杂下垫面的共同作用密切相关,在城市区域尤为明显。受数值模拟技术和计算资源的限制,对实际天气条件下大范围城区的强风现象进行建筑物分辨率的大规模数值模拟研究仍是一个挑战。本研究利用中尺度气象模式嵌套流体计算动力模式的超高分辨率局地气象预报系统,对强冷空气过程造成广州市区的一次强风事件进行数值模拟,深入探讨强风的精细结构和形成机制。结果表明,伴随着强冷空气入侵,广州市区的平均风速和风场高频扰动均明显增强,且在城市冠层顶尤为明显,呈现区域不均匀的三维结构,数值模拟与地面观测相一致。较大范围的强风速和阵风主要出现在建筑物较为低矮的老城区上空,并持续影响下游河道等开阔区域。在高层建筑密集的新城区,虽然整体风速明显减弱,但能在平行风向的街道狭管和下游区域形成局地强风。特别是,超高层建筑群引起显著的垂直环流,导致强风扰动向下传播,造成最大风速达8 m s?1的地面局地强风,阵风指数接近2。上游建筑群引起的风场扰动呈现大尺度湍流结构,能沿着平均气流传播影响数公里之远的下游地区。当风场扰动经过广州塔等单体超高层建筑时,可在其两侧绕流区再次加强,形成局地强风。局地强风和阵风还出现在垂直于风向排列的沿江高层建筑群的侧边,与建筑屏风的阻挡效应和缺口溢出有关。研究结果促进认识城市强风的时空特征和物理机制,有助于提升城市气象的精细化预报水平。  相似文献   

6.
The objective of this study is to examine the impact of assimilation of conventional and satellite data on the prediction of a severe cyclonic storm that formed in the Bay of Bengal during November 2008 with the four-dimensional data assimilation (FDDA) technique. The Weather Research and Forecasting (WRF ARW) model was used to study the structure, evolution, and intensification of the storm. Five sets of numerical simulations were performed using the WRF. In the first one, called Control run, the National Centers for Environmental Prediction (NCEP) Final Analysis (FNL) was used for the initial and boundary conditions. In the remaining experiments available observations were used to obtain an improved analysis and FDDA grid nudging was performed for a pre-forecast period of 24 h. The second simulation (FDDAALL) was performed with all the data of the Quick Scatterometer (QSCAT), Special Sensor Microwave Imager (SSM/I) winds, conventional surface, and upper air meteorological observations. QSCAT wind alone was used in the third simulation (FDDAQSCAT), the SSM/I wind alone in the fourth (FDDASSMI) and the conventional observations alone in the fifth (FDDAAWS). The FDDAALL with assimilation of all observations, produced sea level pressure pattern closely agreeing with the analysis. Examination of various parameters indicated that the Control run over predicted the intensity of the storm with large error in its track and landfall position. The assimilation experiment with QSCAT winds performed marginally better than the one with SSM/I winds due to better representation of surface wind vectors. The FDDAALL outperformed all the simulations for the intensity, movement, and rainfall associated with the storm. Results suggest that the combination of land-based surface, upper air observations along with satellite winds for assimilation produced better prediction than the assimilation with individual data sets.  相似文献   

7.
In this study, coastal gales and rainfall attributed to the landfall of Typhoon Soudelor (2015) are analyzed based on observational dense automatic weather stations data, advanced scatterometer-retrieved 10-m ocean surface wind data and simulations using the Weather Research and Forecast (WRF) model. This study focuses on gale bands in the right-front quadrant of the typhoon and associated coastal winds over Zhejiang and Fujian Provinces in China before the landfall of the typhoon. The results are summarized as follows. (1) 10-m surface wind data from automatic weather stations over land and islands, advanced scatterometer-retrieved 10-m ocean surface wind data, and the WRF simulation indicate similar mesoscale offshore gales. (2) The model simulation with a 333-m grid mesh indicates a gale zone over the right-front quadrant of the typhoon; the gale is “broken” over the coastal areas, and formed an inhomogeneous gale band. (3) The model-simulated winds agree well with the island observations. (4) Non-uniform gales over boundary layers result in horizontal wind-speed gradients and strong convergence that favors the development of convection and the maintenance of ocean surface gales.  相似文献   

8.
The MM5 modelling system has been used to perform regional climate simulations over Western Europe on a 45-km grid for the years 1971 to 2000. We focus our analysis on the impact of the driving input data on simulated precipitation in the Alpine area. Using ERA40 reanalysis data, the MM5 climatology of precipitation compares reasonably well with an observational climatology for the Alpine region. Switching to an ECHAM5 climate simulation as driving data induces excessive overprediction by up to 80% in the colder seasons there, primarily over the Alpine slopes. The large-scale flow provided by the global datasets revealed moderate differences indicating an increased number of low-pressure systems travelling from the Atlantic into the Alpine region for ECHAM5 compared with ERA40. Mean seasonal 700-hPa wind speeds correspondingly showed higher values for the ECHAM5 driven simulation in the central Alps. Partitioning three-hourly 700-hPa winds according to direction and speed in the central Alps specifically revealed a distinct shift to stronger westerly and north-westerly winds. Furthermore, aggregating three-hourly rainfall amounts to the same wind direction and wind speed intervals as for the wind statistics revealed strongly intensified precipitation due to the overly intense westerly winds, implying too intense orographic precipitation enhancement.  相似文献   

9.
To investigate the suitability of computational fluid dynamics (CFD) with regard to windbreak aerodynamics, simulations are performed with a state-of-the-art numerical scheme (Fluent) and compared against experimental data for two- and three-dimensional disturbances, namely the case of a long straight porous shelter fence and the case of a shelter fence erected in a square about an enclosed plot. A thorough sensitivity study quantifies the impact of numerical choices on the simulation (e.g. grid-point density, domain size, turbulence closure), and leads to guidelines that should ensure objective simulation of windbreak flows. On a fine grid Fluent’s “realizable k–ε closure” gives results that are in qualitative accord with the observed mean winds.  相似文献   

10.
Summary Numerical simulations of increasing complexity are conducted to investigate topographic controls and ambient wind effects upon drainage flows along a portion of the Colorado Front Range in the central Rocky Mountains. A series of two-dimensional simulations show the effects upon the drainage flow of changing slope gradient at the mountain-plain interface. For a given mountain slope, a decrease in the slope of the plain decelerates the mountain drainage jet as it approaches the plain and causes the jet to elevate. The integrated effects of slope and valley drainage are presented with particle trajectories for a particular drainage basin along the Front Range. A nested grid simulation of drainage flow from multiple basins along the Front Range shows that basin area is an important factor in the strength of the drainage flow and that canyon topography variations greatly affect the behavior of the drainage jet as it flows through the canyon mouth onto the plain. Strong drainage winds developed on each of four case night simulations due to the presence of only weak ambient wind below mountaintop. The weak winds represent a decoupling of the near-surface from stronger winds above mountaintop. The canyon drainage exhibited substantial temporal variability in wind speed with the inclusion of ambient winds, due to interactions between ambient and drainage winds.With 11 Figures  相似文献   

11.
利用风洞试验方法,以上海陆家嘴金融贸易区建筑群及上海中心大厦为研究对象,讨论了不同粗糙度、不同风向条件下,高密度建筑群和超高建筑物对风环境的影响。结果表明:1)地表粗糙度越小,大风区范围越大。此外,建筑群的分布、排列形式会明显改变来流走向。2)超高建筑物由于其形态上下不一致,在一定条件下,不同高度处的风矢量存在明显差异。3)参照国外建筑物风环境舒适度评估标准,对模拟区域内行人高度处的舒适度进行了评估,并给出了3个风环境较差的区域。  相似文献   

12.
Precise urban atmospheric boundary layer (ABL) wind tunnel simulations are essential for a wide variety of atmospheric studies in built-up environments including wind loading of structures and air pollutant dispersion. One of key issues in addressing these problems is a proper choice of simulation length scale. In this study, an urban ABL was reproduced in a boundary layer wind tunnel at different scales to study possible scale effects. Two full-depth simulations and one part-depth simulation were carried out using castellated barrier wall, vortex generators, and a fetch of roughness elements. Redesigned “Counihan” vortex generators were employed in the part-depth ABL simulation. A hot-wire anemometry system was used to measure mean velocity and velocity fluctuations. Experimental results are presented as mean velocity, turbulence intensity, Reynolds stress, integral length scale of turbulence, and power spectral density of velocity fluctuations. Results suggest that variations in length-scale factor do not influence the generated ABL models when using similarity criteria applied in this study. Part-depth ABL simulation compares well with two full-depth ABL simulations indicating the truncated vortex generators developed for this study can be successfully employed in urban ABL part-depth simulations.  相似文献   

13.
杨文凯  白洁  严卫  刘健文 《气象》2007,33(4):35-39
云迹风反演中的一项很重要的工作是选取随风移动、变化缓慢的云,即示踪云。文中设计了一种示踪云选取算法,以改善云迹风的质量和密度分布。该算法的特色是反演风的位置并不固定在反演网格的中心位置,而是通过梯度分析的方法使反演风的位置得到优化,再经过积雨云检测和灰度分布均匀程度检验,剔除不适合用来反演的目标物。对用该方法选取的示踪云进行云迹风反演,然后对反演出的云迹风进行环流分析,并与探空风进行比较。结果表明,反演出的云迹风质量好,密度很高,清晰地反映出天气系统的风场结构。  相似文献   

14.
尽管经典台风强度理论是基于梯度风平衡模型,但是已有的飞机观测资料和数值模拟研究发现,边界层中和眼墙附近存在非梯度风平衡气流,前人数值模拟发现,眼墙附近最大的超梯度风可以达到切向风速的16.7%。大涡模拟可以模拟出滚涡和龙卷尺度涡旋等小尺度系统,这些小尺度系统对梯度风平衡可能产生影响,使用中尺度天气预报模式结合大涡模拟(WRF-LES)对模拟台风内核区域方位角平均的梯度风平衡进行了分析,三个大涡模拟试验的水平分辨率分别为333 m、111 m和37 m,结果表明非梯度风平衡气流并未因为分辨率提高而显著增强或产生结构差异,最大超梯度风出现在边界层顶处最大切向风半径的内侧,达到梯度风速的10.8%~16.1%。进一步分析发现,不同台风中心定位方法会影响非梯度风平衡气流,最小气压方差法和最大切向风法可以得到与前人模拟一致的结构,而气压权重法得到的低层超梯度风中心远离眼墙、靠近台风中心,位涡权重法得到的低层超梯度风的径向范围向内扩大,最小气压方差法和最大切向风法更适合用于梯度风平衡研究中的台风中心定位。  相似文献   

15.
Urban surface and radiation processes are incorporated into a computational fluid dynamics (CFD) model to investigate the diurnal variation of flow in a street canyon with an aspect ratio of 1. The developed CFD model predicts surface and substrate temperatures of the roof, walls, and road. One-day simulations are performed with various ambient wind speeds of 2, 3, 4, 5, and 6 ms−1, with the ambient wind perpendicular to the north–south oriented canyon. During the day, the largest maximum surface temperature for all surfaces is found at the road surface for an ambient wind speed of 3 ms−1 (56.0°C). Two flow regimes are identified by the vortex configuration in the street canyon. Flow regime I is characterized by a primary vortex. Flow regime II is characterized by two counter-rotating vortices, which appears in the presence of strong downwind building-wall heating. Air temperature is relatively low near the downwind building wall in flow regime I and inside the upper vortex in flow regime II. In flow regime II, the upper vortex expands with increasing ambient wind speed, thus enlarging the extent of cool air within the canyon. The canyon wind speed in flow regime II is proportional to the ambient wind speed, but that in flow regime I is not. For weak ambient winds, the dependency of surface sensible heat flux on the ambient wind speed is found to play an essential role in determining the relationship between canyon wind speed and ambient wind speed.  相似文献   

16.
Scalar dispersion from ground-level sources in arrays of buildings is investigated using wind-tunnel measurements and large-eddy simulation (LES). An array of uniform-height buildings of equal dimensions and an array with an additional single tall building (wind tunnel) or a periodically repeated tall building (LES) are considered. The buildings in the array are aligned and form long streets. The sensitivity of the dispersion pattern to small changes in wind direction is demonstrated. Vertical scalar fluxes are decomposed into the advective and turbulent parts and the influences of wind direction and of the presence of the tall building on the scalar flux components are evaluated. In the uniform-height array turbulent scalar fluxes are dominant, whereas the tall building produces an increase of the magnitude of advective scalar fluxes that yields the largest component. The presence of the tall building causes either an increase or a decrease to the total vertical scalar flux depending on the position of the source with respect to the tall building. The results of the simulations can be used to develop parametrizations for street-canyon dispersion models and enhance their capabilities in areas with tall buildings.  相似文献   

17.
基于WRF和CFD软件结合的风能资源数值模拟试验研究   总被引:4,自引:2,他引:2  
方艳莹  徐海明  朱蓉  王鹏  何晓凤  Didier Delaunay  付斌  王黎 《气象》2012,38(11):1378-1389
运用中尺度数值模式WRF与法国CFD软件MeteodynwT相结合的方法(WRF/WT),进行了广东省海陵岛地区的水平分辨率100m×100m的风能资源数值模拟试验,采用海陵岛上7座测风塔观测资料对WRF/WT模式的模拟风场进行误差检验,并与WRF/WAsP模式系统对单点风能参数模拟误差进行对比,研究WRF/WT模式系统在风电场微观选址和分散式风电开发利用中应用的可行性。结果表明:中尺度模式与CFD软件结合的数值模拟方法对区域风能资源分布趋势的模拟比单纯应用CFD软件更准确;WRF/WT模式系统应用于复杂地形风能资源数值模拟评估是可行的,其对区域风能资源参数分布模拟的准确率与WRF/WAsP对2km范围内风能资源参数模拟的准确率相当;WRF/WT模式系统在风速频率分布不满足Weibull分布的情况下和陡峭地形条件下有较好的模拟效果,相对WRF/wAsP有明显优势。今后需进一步研究中尺度模式与CFD软件的衔接方法,以及对中尺度模式模拟结果的误差订正。  相似文献   

18.
FY-2C云迹风资料同化应用对台风预报的影响试验研究   总被引:3,自引:2,他引:1  
刘瑞  翟国庆  王彰贵 《大气科学》2012,36(2):350-360
针对0505号台风“海棠”, 采用WRF区域中尺度模式进行控制试验和两个同化试验, 利用WRF-3DVAR同化系统同化FY-2C红外和水汽两个通道云迹风反演产品, 同化分云迹风经质量控制和未经质量控制两组同化试验。通过三组试验分析云迹风资料对降水和风场等的预报结果的影响, 并进行24小时降水量分级Ts评分检验以及风场点对点检验。结果表明: 同化经质量控制云迹风资料可以提高降水落区和强度预报的准确度, 不同等级的Ts评分较其它试验都有较明显改进; 风场预报模拟也有所改善。增加两例台风, 使用与“海棠” 相似的处理方法进行模拟试验, 并对模拟结果24小时降水分析与检验, 得到与“海棠”类似结论。因此, 经过合理性选择的云迹风资料的加入, 有利于补充初始场中可能未包含的中尺度信息, 从而提高试验中对于降水、风场等的模拟效果, 提高WRF模式的模拟预报能力。  相似文献   

19.
黄海波  陈阳权  王清平 《气象科技》2014,42(6):1064-1068
利用WRF模式和GFS资料对乌鲁木齐机场一次东南大风天气进行了预报和地形敏感性试验。模式预报的结果表明:WRF模式对东南大风的起风时间、持续时间、风速大小等方面有较强的预报能力。地形敏感性试验表明:1乌鲁木齐市区与机场300m左右的高度差对机场风速的影响很大;2机场上空下沉运动的强弱与东南大风的强弱有很好的对应关系;3机场东南大风的风速变化并不总是与峡谷两端气压梯度力的变化同步。此次东南大风天气的产生是低空动量下传、狭管效应和下坡风共同作用的结果。动量下传主要出现在海拔2000m以下的高度,下坡风主要出现在海拔935m以下的高度。  相似文献   

20.
The boundary layer wind tunnel at the Technische Universit?t München was tested for atmospheric boundary layer (ABL) simulations. The ABLs developing above rural, suburban, and urban terrains were reproduced using the Counihan method, i.e., castellated barrier wall, vortex generators, and a fetch of surface roughness elements. A series of flow-characteristic evaluations was performed to investigate the flow development and uniformity. Experimental results presented as mean velocity, turbulence intensity, integral length scale of turbulence, Reynolds stress, and power spectral density of velocity fluctuations were compared with the ESDU data and/or theoretical models. Generated ABL wind-tunnel simulations compare well with the rural, suburban, and urban ABLs. In the test section area used for experiments on structural models, the ABL simulation is developed and uniform. Results of this study indicate the boundary layer wind tunnel at the Technische Universit?t München can be successfully employed in a broad spectrum of engineering, environmental, and micrometeorological studies, where it is required to accurately reproduce ABL characteristics.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号