首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The sensible heat flux (H) is determined using large-aperture scintillometer (LAS) measurements over a city centre for eight different computation scenarios. The scenarios are based on different approaches of the mean rooftop-level \((z_{H})\) estimation for the LAS path. Here, \(z_{H}\) is determined separately for wind directions perpendicular (two zones) and parallel (one zone) to the optical beam to reflect the variation in topography and building height on both sides of the LAS path. Two methods of \(z_{H}\) estimation are analyzed: (1) average building profiles; (2) weighted-average building height within a 250 m radius from points located every 50 m along the optical beam, or the centre of a certain zone (in the case of a wind direction perpendicular to the path). The sensible heat flux is computed separately using the friction velocity determined with the eddy-covariance method and the iterative procedure. The sensitivity of the sensible heat flux and the extent of the scintillometer source area to different computation scenarios are analyzed. Differences reaching up to 7% between heat fluxes computed with different scenarios were found. The mean rooftop-level estimation method has a smaller influence on the sensible heat flux (?4 to 5%) than the area used for the \(z_{H}\) computation (?5 to 7%). For the source-area extent, the discrepancies between respective scenarios reached a similar magnitude. The results demonstrate the value of the approach in which \(z_{H}\) is estimated separately for wind directions parallel and perpendicular to the LAS optical beam.  相似文献   

2.
Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.  相似文献   

3.
We quantify the spatial and temporal aspects of the urban heat-island (UHI) effect for Kanpur, a major city in the humid sub-tropical monsoon climate of the Gangetic basin. Fixed station measurements are used to investigate the diurnality and inter-seasonality in the urban–rural differences in surface temperature (\({\Delta } T_\mathrm{s}\)) and air temperature (\({\Delta } T_\mathrm{c}\)) separately. The extent of the spatial variations of the nighttime \({\Delta } T_\mathrm{c}\) and \({\Delta } T_\mathrm{s}\) is investigated through mobile campaigns and satellite remote sensing respectively. Nighttime \({\Delta } T_\mathrm{c}\) values dominate during both the pre-monsoon (maximum of 3.6 \(^\circ \hbox {C}\)) and the monsoon (maximum of 2.0 \(^\circ \hbox {C}\)). However, the diurnality in \({\Delta } T_\mathrm{s}\) is different, with higher daytime values during the pre-monsoon, but very little diurnality during the monsoon. The nighttime \({\Delta } T_\mathrm{s}\) value is mainly associated with differences in the urban–rural incoming longwave radiative flux (\(r^{2}=0.33\) during the pre-monsoon; 0.65 during the monsoon), which, in turn, causes a difference in the outgoing longwave radiative flux. This difference may modulate the nighttime \({\Delta } T_\mathrm{c}\) value as suggested by significant correlations (\(r^{2}=0.68\) for the pre-monsoon; 0.50 for the monsoon). The magnitude of \({\Delta } T_\mathrm{c}\) may also be modulated by advection, as it is inversely related with the urban wind speed. A combination of in situ, remotely sensed, and model simulation data were used to show that the inter-seasonality in \({\Delta } T_\mathrm{s}\), and, to a lesser extent, in \({\Delta } T_\mathrm{c}\), may be related to the change in the land use of the rural site between the pre-monsoon and the monsoon periods. Results suggest that the degree of coupling of \({\Delta } T_\mathrm{s}\) and \({\Delta } T_\mathrm{c}\) may be a strong function of land use and land cover.  相似文献   

4.
Nine methods to determine local-scale aerodynamic roughness length \((z_{0})\) and zero-plane displacement \((z_{d})\) are compared at three sites (within 60 m of each other) in London, UK. Methods include three anemometric (single-level high frequency observations), six morphometric (surface geometry) and one reference-based approach (look-up tables). A footprint model is used with the morphometric methods in an iterative procedure. The results are insensitive to the initial \(z_{d}\) and \(z_{0}\) estimates. Across the three sites, \(z_{d}\) varies between 5 and 45 m depending upon the method used. Morphometric methods that incorporate roughness-element height variability agree better with anemometric methods, indicating \(z_{d}\) is consistently greater than the local mean building height. Depending upon method and wind direction, \(z_{0}\) varies between 0.1 and 5 m with morphometric \(z_{0}\) consistently being 2–3 m larger than the anemometric \(z_{0}\). No morphometric method consistently resembles the anemometric methods. Wind-speed profiles observed with Doppler lidar provide additional data with which to assess the methods. Locally determined roughness parameters are used to extrapolate wind-speed profiles to a height roughly 200 m above the canopy. Wind-speed profiles extrapolated based on morphometric methods that account for roughness-element height variability are most similar to observations. The extent of the modelled source area for measurements varies by up to a factor of three, depending upon the morphometric method used to determine \(z_{d}\) and \(z_{0}\).  相似文献   

5.
Sensible heat fluxes ( \(Q_{H}\) ) are determined using scintillometry and eddy covariance over a suburban area. Two large-aperture scintillometers provide spatially integrated fluxes across path lengths of 2.8 and 5.5 km over Swindon, UK. The shorter scintillometer path spans newly built residential areas and has an approximate source area of 2–4 \(\text {km}^{2}\) , whilst the long path extends from the rural outskirts to the town centre and has a source area of around 5–10 \(\text {km}^{2}\) . These large-scale heat fluxes are compared with local-scale eddy-covariance measurements. Clear seasonal trends are revealed by the long duration of this dataset and variability in monthly \(Q_{H}\) is related to the meteorological conditions. At shorter time scales the response of \(Q_{H}\) to solar radiation often gives rise to close agreement between the measurements, but during times of rapidly changing cloud cover spatial differences in the net radiation ( \(Q^{*}\) ) coincide with greater differences between heat fluxes. For clear days \(Q_{H}\) lags \(Q^{*}\) , thus the ratio of \(Q_{H}\) to \(Q^{*}\) increases throughout the day. In summer the observed energy partitioning is related to the vegetation fraction through use of a footprint model. The results demonstrate the value of scintillometry for integrating surface heterogeneity and offer improved understanding of the influence of anthropogenic materials on surface-atmosphere interactions.  相似文献   

6.
An extensive meteorological observational dataset at Dome C, East Antarctic Plateau, enabled estimation of the sensitivity of surface momentum and sensible heat fluxes to aerodynamic roughness length and atmospheric stability in this region. Our study reveals that (1) because of the preferential orientation of snow micro-reliefs (sastrugi), the aerodynamic roughness length \(z_{0}\) varies by more than two orders of magnitude depending on the wind direction; consequently, estimating the turbulent fluxes with a realistic but constant \(z_{0}\) of 1 mm leads to a mean friction velocity bias of \(24\,\%\) in near-neutral conditions; (2) the dependence of the ratio of the roughness length for heat \(z_{0t}\) to \(z_{0}\) on the roughness Reynolds number is shown to be in reasonable agreement with previous models; (3) the wide range of atmospheric stability at Dome C makes the flux very sensitive to the choice of the stability functions; stability function models presumed to be suitable for stable conditions were evaluated and shown to generally underestimate the dimensionless vertical temperature gradient; as these models differ increasingly with increases in the stability parameter z / L, heat flux and friction velocity relative differences reached \(100\,\%\) when \(z/L > 1\); (4) the shallowness of the stable boundary layer is responsible for significant sensitivity to the height of the observed temperature and wind data used to estimate the fluxes. Consistent flux results were obtained with atmospheric measurements at heights up to 2 m. Our sensitivity study revealed the need to include a dynamical parametrization of roughness length over Antarctica in climate models and to develop new parametrizations of the surface fluxes in very stable conditions, accounting, for instance, for the divergence in both radiative and turbulent fluxes in the first few metres of the boundary layer.  相似文献   

7.
The influence of random errors in turbulence measurements on scalar similarity for temperature, water vapour, \(\hbox {CO}_{2}\), and \(\hbox {NH}_{3}\) is investigated using two eddy-covariance datasets collected over a lake and a cattle feedlot. Three measures of scalar similarity, namely, the similarity constant in the flux–variance relationship, the correlation coefficient between two scalars and the relative transport efficiency, are examined. The uncertainty in the similarity constant \(C_{s}\) in the flux–variance relationship resulting from random errors in turbulence measurements is quantified based on error propagation analyses and a Monte-Carlo sampling method, which yields a distribution instead of a single value for \(C_{s}\). For different scalars, the distributions of \(C_{s}\) are found to significantly overlap, implying that scalars are transported similarly under strongly unstable conditions. The random errors in the correlation coefficients between scalars and the relative transport efficiencies are also quantified through error propagation analyses, and they increase as the atmosphere departs from neutral conditions. Furthermore, the correlation coefficients between three scalars (water vapour, \(\hbox {CO}_{2}\), and \(\hbox {NH}_{3}\)) are statistically different from unity while the relative transport efficiencies are not, which highlights the difference between these two measures of scalar similarity. The results suggest that uncertainties in these measures of scalar similarity need to be quantified when using them to diagnose the existence of dissimilarity among different scalars.  相似文献   

8.
Stereoscopic particle image velocimetry was used to provide a three-dimensional characterization of the flow around a simplified urban model defined by a 5 by 7 array of blocks, forming four parallel streets, perpendicular to the incoming wind direction corresponding to a zero angle of incidence. Channeling of the flow through the array under consideration was observed, and its effect increased as the incoming wind direction, or angle of incidence (AOI), was changed from \(0^{\circ }\) to \(15^{\circ }\), \(30^{\circ }\), and \(45^{\circ }\). The flow between blocks can be divided into two regions: a region of low turbulence kinetic energy (TKE) levels close to the leeward side of the upstream block, and a high TKE area close to the downstream block. The centre of the arch vortex is located in the low TKE area, and two regions of large streamwise velocity fluctuation bound the vortex in the spanwise direction. Moreover, a region of large spanwise velocity fluctuation on the downstream block is found between the vortex legs. Our results indicate that the reorientation of the arch vortex at increasing AOI is produced by the displacement of the different TKE regions and their interaction with the shear layers on the sides and top of the upstream and downstream blocks, respectively. There is also a close connection between the turbulent structure between the blocks and the wind gusts. The correlations among gust components were also studied, and it was found that in the near-wall region of the street the correlations between the streamwise and spanwise gusts \(R_{uv}\) were dominant for all four AOI cases. At higher wall-normal positions in the array, the \(R_{uw}\) correlation decreased with increasing AOI, whereas the \(R_{uv}\) coefficient increased as AOI increased, and at \({\textit{AOI}}=45^{\circ }\) all three correlations exhibited relatively high values of around 0.4.  相似文献   

9.
We present a simple model based on already existing and widely used equations for estimating particle mass fluxes on surfaces sheltered by live vegetation. Wind-tunnel measurements of vertical profiles of mass flux in three different dense live plant canopies, and as a function of the spatially averaged skin friction velocity \({u_{\tau }}'\), provide the baseline set of data. For the bare-sand surface, the total mass flux Q shows the typical \(b({u_\tau }' - {u_{\tau t}}')^{3 }\) increase with increasing skin friction velocity \({u_{\tau }}'\), where b is a constant and \({u_{\tau t}}'\) is the threshold at the onset of particle erosion. Similar relations, however, with different values for b and \({u_{\tau t}}'\) compared to the bare-sand surface were found for experiments with 5.25 and 24.5 plants \(\hbox {m}^{-2}\) and can be explained by the spatial variations of \(u_{\tau }\) for the canopy cases. Based on the resulting parameters b and \({u_{\tau t}}'\), which are found to be functions of the roughness density \(\lambda \), we present a final simple relation \(Q(\lambda ,\, {u_{\tau }}')\) used for estimating the total mass flux for surfaces sheltered by live vegetation.  相似文献   

10.
Large-eddy simulation (LES) is used to investigate the effects of building-height variability on turbulent flows over an actual urban area, the city of Kyoto, which is reproduced using a 2-m resolution digital surface dataset. Comparison of the morphological characteristics of Kyoto with those of European, North American, and other Japanese cities indicates a similarity to European cities but with more variable building heights. The performance of the LES model is validated and found to be consistent with turbulence observations obtained from a meteorological tower and from Doppler lidar. We conducted the following two numerical experiments: a control experiment using Kyoto buildings, and a sensitivity experiment in which all the building heights are set to the average height over the computational region \(h_{all}\). The difference of Reynolds stress at height \(z=2.5h_{all}\) between the control and sensitivity experiments is found to increase with the increase in the plan-area index (\(\lambda _p\)) for \(\lambda _p > 0.32\). Thus, values of \(\lambda _p\approx 0.3\) can be regarded as a threshold for distinguishing the effects of building-height variability. The quadrant analysis reveals that sweeps contribute to the increase in the Reynolds stress in the control experiment at a height \(z= 2.5h_{all}\). The exuberance in the control experiment at height \(z=0.5h_{all}\) is found to decrease with increase in the building-height variability. Although the extreme momentum flux at height \(z=2.5h_{all}\) in the control experiment appears around buildings, it contributes little to the total Reynolds stress and is not associated with coherent motions.  相似文献   

11.
The influence of wave-associated parameters controlling turbulent \(\hbox {CO}_2\) fluxes through the air–sea interface is investigated in a coastal region. A full year of high-quality data of direct estimates of air–sea \(\hbox {CO}_2\) fluxes based on eddy-covariance measurements is presented. The study area located in Todos Santos Bay, Baja California, Mexico, is a net sink of \(\hbox {CO}_2\) with a mean flux of \(-1.3\, \upmu \hbox {mol m}^{-2}\hbox {s}^{-1}\) (\(-41.6\hbox { mol m}^{-2}\hbox {yr}^{-1}\)). The results of a quantile-regression analysis computed between the \(\hbox {CO}_2\) flux and, (1) wind speed, (2) significant wave height, (3) wave steepness, and (4) water temperature, suggest that the significant wave height is the most correlated parameter with the magnitude of the flux but the behaviour of the relation varies along the probability distribution function, with the slopes of the regression lines presenting both positive and negative values. These results imply that the presence of surface waves in coastal areas is the key factor that promotes the increase of the flux from and into the ocean. Further analysis suggests that the local characteristics of the aqueous and atmospheric layers might determine the direction of the flux.  相似文献   

12.
The Nieuwstadt closed-form solution for the stationary Ekman layer is generalized for katabatic flows within the conceptual framework of the Prandtl model. The proposed solution is valid for spatially-varying eddy viscosity and diffusivity (O’Brien type) and constant Prandtl number (Pr). Variations in the velocity and buoyancy profiles are discussed as a function of the dimensionless model parameters \(z_0 \equiv \hat{z}_0 \hat{N}^2 Pr \sin {(\alpha )} |\hat{b}_\mathrm{s} |^{-1}\) and \(\lambda \equiv \hat{u}_{\mathrm{ref}}\hat{N} \sqrt{Pr} |\hat{b}_\mathrm{s} |^{-1}\), where \(\hat{z}_0\) is the hydrodynamic roughness length, \(\hat{N}\) is the Brunt-Väisälä frequency, \(\alpha \) is the surface sloping angle, \(\hat{b}_\mathrm{s}\) is the imposed surface buoyancy, and \(\hat{u}_{\mathrm{ref}}\) is a reference velocity scale used to define eddy diffusivities. Velocity and buoyancy profiles show significant variations in both phase and amplitude of extrema with respect to the classic constant \(\textit{K}\) model and with respect to a recent approximate analytic solution based on the Wentzel-Kramers-Brillouin theory. Near-wall regions are characterized by relatively stronger surface momentum and buoyancy gradients, whose magnitude is proportional to \(z_0\) and to \(\lambda \). In addition, slope-parallel momentum and buoyancy fluxes are reduced, the low-level jet is further displaced toward the wall, and its peak velocity depends on both \(z_0\) and \(\lambda \).  相似文献   

13.
Urban morphology and inter-building shadowing result in a non-uniform distribution of surface heating in urban areas, which can significantly modify the urban flow and thermal field. In Part I, we found that in an idealized three-dimensional urban array, the spatial distribution of the thermal field is correlated with the orientation of surface heating with respect to the wind direction (i.e. leeward or windward heating), while the dispersion field changes more strongly with the vertical temperature gradient in the street canyon. Here, we evaluate these results more closely and translate them into metrics of “city breathability,” with large-eddy simulations coupled with an urban energy-balance model employed for this purpose. First, we quantify breathability by, (i) calculating the pollutant concentration at the pedestrian level (horizontal plane at \(z\approx 1.5\)–2 m) and averaged over the canopy, and (ii) examining the air exchange rate at the horizontal and vertical ventilating faces of the canyon, such that the in-canopy pollutant advection is distinguished from the vertical removal of pollution. Next, we quantify the change in breathability metrics as a function of previously defined buoyancy parameters, horizontal and vertical Richardson numbers (\(Ri_\text {h}\) and \(Ri_\text {v}\), respectively), which characterize realistic surface heating. We find that, unlike the analysis of airflow and thermal fields, consideration of the realistic heating distribution is not crucial in the analysis of city breathability, as the pollutant concentration is mainly correlated with the vertical temperature gradient (\(Ri_\text {v}\)) as opposed to the horizontal (\(Ri_\text {h}\)) or bulk (\(Ri_\text {b}\)) thermal forcing. Additionally, we observe that, due to the formation of the primary vortex, the air exchange rate at the roof level (the horizontal ventilating faces of the building canyon) is dominated by the mean flow. Lastly, since \(Ri_\text {h}\) and \(Ri_\text {v}\) depend on the meteorological factors (ambient air temperature, wind speed, and wind direction) as well as urban design parameters (such as surface albedo), we propose a methodology for mapping overall outdoor ventilation and city breathability using this characterization method. This methodology helps identify the effects of design on urban microclimate, and ultimately informs urban designers and architects of the impact of their design on air quality, human health, and comfort.  相似文献   

14.
Corrections accounting for air density fluctuations due to heat and water vapour fluxes must be applied to the measurement of eddy-covariance fluxes when using open-path sensors. Experimental tests and ecosystem observations have demonstrated the important role density corrections play in accurately quantifying carbon dioxide \((\hbox {CO}_{2})\) fluxes, but less attention has been paid to evaluating these corrections for methane \((\hbox {CH}_{4})\) fluxes. We measured \(\hbox {CH}_{4}\) fluxes with open-path sensors over a suite of sites with contrasting \(\hbox {CH}_{4}\) emissions and energy partitioning, including a pavement airfield, two negligible-flux ecosystems (drained alfalfa and pasture), and two high-flux ecosystems (flooded wetland and rice). We found that density corrections successfully re-zeroed fluxes in negligible-flux sites; however, slight overcorrection was observed above pavement. The primary impact of density corrections varied over negligible- and high-flux ecosystems. For negligible-flux sites, corrections led to greater than 100% adjustment in daily budgets, while these adjustments were only 3–10% in high-flux ecosystems. The primary impact to high-flux ecosystems was a change in flux diel patterns, which may affect the evaluation of relationships between biophysical drivers and fluxes if correction bias exists. Additionally, accounting for density effects to high-frequency \(\hbox {CH}_{4}\) fluctuations led to large differences in observed \(\hbox {CH}_{4}\) flux cospectra above negligible-flux sites, demonstrating that similar adjustments should be made before interpreting \(\hbox {CH}_{4}\) cospectra for comparable ecosystems. These results give us confidence in \(\hbox {CH}_{4}\) fluxes measured by open-path sensors, and demonstrate that density corrections play an important role in adjusting flux budgets and diel patterns across a range of ecosystems.  相似文献   

15.
Lagrangian and Eulerian statistics are obtained from a water-channel experiment of an idealized two-dimensional urban canopy flow in neutral conditions. The objective is to quantify the Eulerian \((T^{\mathrm{E}})\) and Lagrangian \((T^{\mathrm{L}})\) time scales of the turbulence above the canopy layer as well as to investigate their dependence on the aspect ratio of the canopy, AR, as the latter is the ratio of the width (W) to the height (H) of the canyon. Experiments are also conducted for the case of flat terrain, which can be thought of as equivalent to a classical one-directional shear flow. The values found for the Eulerian time scales on flat terrain are in agreement with previous numerical results found in the literature. It is found that both the streamwise and vertical components of the Lagrangian time scale, \(T_\mathrm{u}^\mathrm{L} \) and \(T_\mathrm{w}^\mathrm{L} \), follow Raupach’s linear law within the constant-flux layer. The same holds true for \(T_\mathrm{w}^\mathrm{L} \) in both the canopies analyzed \((AR= 1\) and \(AR= 2\)) and also for \(T_\mathrm{u}^\mathrm{L} \) when \(AR = 1\). In contrast, for \(AR = 2\), \(T_\mathrm{u}^\mathrm{L} \) follows Raupach’s law only above \(z=2H\). Below that level, \(T_\mathrm{u}^\mathrm{L} \) is nearly constant with height, showing at \(z=H\) a value approximately one order of magnitude greater than that found for \(AR = 1\). It is shown that the assumption usually adopted for flat terrain, that \(\beta =T^{\mathrm{L}}/T^{\mathrm{E}}\) is proportional to the inverse of the turbulence intensity, also holds true even for the canopy flow in the constant-flux layer. In particular, \(\gamma /i_\mathrm{u} \) fits well \(\beta _\mathrm{u} =T_\mathrm{u}^\mathrm{L} /T_\mathrm{u}^\mathrm{E} \) in both the configurations by choosing \(\gamma \) to be 0.35 (here, \(i_\mathrm{u} =\sigma _\mathrm{u} / \bar{u} \), where \(\bar{u} \) and \(\sigma _\mathrm{u} \) are the mean and the root-mean-square of the streamwise velocity component, respectively). On the other hand, \(\beta _\mathrm{w} =T_\mathrm{w}^\mathrm{L} /T_\mathrm{w}^\mathrm{E} \) follows approximately \(\gamma /i_\mathrm{w} =0.65/\left( {\sigma _\mathrm{w} /\bar{u} } \right) \) for \(z > 2H\), irrespective of the AR value. The second main objective is to estimate other parameters of interest in dispersion studies, such as the eddy diffusivity of momentum \((K_\mathrm{{T}})\) and the Kolmogorov constant \((C_0)\). It is found that \(C_0\) depends appreciably on the velocity component both for the flat terrain and canopy flow, even though for the latter case it is insensitive to AR values. In all the three experimental configurations analyzed here, \(K_\mathrm{{T}}\) shows an overall linear growth with height in agreement with the linear trend predicted by Prandtl’s theory.  相似文献   

16.
In climate and weather prediction models the near-surface turbulent fluxes of heat and momentum and related transfer coefficients are usually parametrized on the basis of Monin–Obukhov similarity theory (MOST). To avoid iteration, required for the numerical solution of the MOST equations, many models apply parametrizations of the transfer coefficients based on an approach relating these coefficients to the bulk Richardson number \(Ri_{b}\). However, the parametrizations that are presently used in most climate models are valid only for weaker stability and larger surface roughnesses than those documented during the Surface Heat Budget of the Arctic Ocean campaign (SHEBA). The latter delivered a well-accepted set of turbulence data in the stable surface layer over polar sea-ice. Using stability functions based on the SHEBA data, we solve the MOST equations applying a new semi-analytic approach that results in transfer coefficients as a function of \(Ri_{b}\) and roughness lengths for momentum and heat. It is shown that the new coefficients reproduce the coefficients obtained by the numerical iterative method with a good accuracy in the most relevant range of stability and roughness lengths. For small \(Ri_{b}\), the new bulk transfer coefficients are similar to the traditional coefficients, but for large \(Ri_{b}\) they are much smaller than currently used coefficients. Finally, a possible adjustment of the latter and the implementation of the new proposed parametrizations in models are discussed.  相似文献   

17.
The three turbulent velocity components, water vapour (\(\text {H}_2\text {O}\)), carbon dioxide (\(\text {CO}_{2}\)), and methane (\(\text {CH}_{4}\)) concentration fluctuations are measured above a boreal peatland and analyzed using conditional sampling and quadrant analysis. The overarching question to be addressed is to what degree lower-order cumulant expansion methods describe transport efficiency and the relative importance of ejections and sweeps to momentum, \(\text {CH}_{4}\), \(\text {CO}_{2}\) and \(\text {H}_2\text {O}\) fluxes across a range of atmospheric flow regimes. The patchy peatland surface creates distinctly different source and sink distributions for the three scalars in space and time thereby adding to the uniqueness of the set-up. The measured and modelled fractional contributions to the momentum flux show that sweep events dominate over ejections in agreement with prior studies conducted in the roughness sublayer. For scalar fluxes, ejections dominate the turbulent fluxes over sweeps. While ejective motions persist longer for momentum transport, sweeping events persist longer for all three scalars. Third-order cumulant expansions describe many of the results detailed above, and the results are surprising given the highly non-Gaussian distribution of \(\text {CH}_{4}\) turbulent fluctuations. Connections between the asymmetric contributions of sweeps and ejections and the flux-transport term arising in scalar turbulent-flux-budget closure are derived and shown to agree reasonably well with measurements. The proposed model derived here is much simpler than prior structural models used to describe laboratory experiments. Implications of such asymmetric contributions on, (i) the usage of the now proliferating relaxed-eddy-accumulation method in turbulent flux measurements, (ii) the constant-flux assumption, and (iii) gradient-diffusion closure models are presented.  相似文献   

18.
Mountain-top observations of greenhouse gas mixing ratios may be an alternative to tall-tower measurements for regional scale source and sink estimation. To investigate the equivalence or limitations of a mountain-top site as compared to a tall-tower site, we used the unique opportunity of comparing in situ measurements of methane (\(\hbox {CH}_{4}\)) and carbon dioxide (\(\hbox {CO}_{2}\)) mixing ratios at a mountain top (986 m above sea level, a.s.l.) with measurements from a nearby (distance 28.4 km) tall tower, sampled at almost the same elevation (1009 m a.s.l.). Special attention was given to, (i) how local wind statistics and greenhouse gas sources and sinks at the mountain top influence the observations, and (ii) whether mountain-top observations can be used as for those from a tall tower for constraining regional greenhouse gas emissions. Wind statistics at the mountain-top site are clearly more influenced by local flow systems than those at the tall-tower site. Differences in temporal patterns of the greenhouse gas mixing ratios observed at the two sites are mostly related to the influence of local sources and sinks at the mountain-top site. Major influences of local sources can be removed by applying a statistical filter (\(5{\mathrm{th}}\) percentile) or a filter that removes periods with unfavourable flow conditions. In the best case, the bias in mixing ratios between the mountain-top and the tall-tower sites after the application of the wind filter was \({-}0.0005\pm 0.0010\) ppm for methane (September, 0000–0400 UTC) and \(0.11\pm 0.18\) ppm for \(\hbox {CO}_{2}\) (February, 1200–1600 UTC). Temporal fluctuations of atmospheric \(\hbox {CH}_{4}\) and \(\hbox {CO}_{2}\) mixing ratios at both stations also showed good agreement (apart from \(\hbox {CO}_{2}\) during summertime) as determined by moving bi-weekly Pearson correlation coefficients (up to 0.96 for \(\hbox {CO}_{2}\) and 0.97 for \(\hbox {CH}_{4}\)). When only comparing mixing ratios minimally influenced by local sources (low bias and high correlation coefficients), our measurements indicate that mountain-top observations are comparable to tall-tower observations.  相似文献   

19.
We examine the effect of varying roughness-element aspect ratio on the mean velocity distributions of turbulent flow over arrays of rectangular-prism-shaped elements. Large-eddy simulations (LES) in conjunction with a sharp-interface immersed boundary method are used to simulate spatially-growing turbulent boundary layers over these rough surfaces. Arrays of aligned and staggered rectangular roughness elements with aspect ratio >1 are considered. First the temporally- and spatially-averaged velocity profiles are used to illustrate the aspect-ratio effects. For aligned prisms, the roughness length (\(z_\mathrm{o}\)) and the friction velocity (\(u_*\)) increase initially with an increase in the roughness-element aspect ratio, until the values reach a plateau at a particular aspect ratio. The exact value of this aspect ratio depends on the coverage density. Further increase in the aspect ratio changes neither \(z_\mathrm{o}\), \(u_*\) nor the bulk flow above the roughness elements. For the staggered cases, \(z_\mathrm{o}\) and \(u_*\) continue to increase for the surface coverage density and the aspect ratios investigated. To model the flow response to variations in roughness aspect ratio, we turn to a previously developed phenomenological volumetric sheltering model (Yang et al., in J Fluid Mech 789:127–165, 2016), which was intended for low to moderate aspect-ratio roughness elements. Here, we extend this model to account for high aspect-ratio roughness elements. We find that for aligned cases, the model predicts strong mutual sheltering among the roughness elements, while the effect is much weaker for staggered cases. The model-predicted \(z_\mathrm{o}\) and \(u_*\) agree well with the LES results. Results show that the model, which takes explicit account of the mutual sheltering effects, provides a rapid and reliable prediction method of roughness effects in turbulent boundary-layer flows over arrays of rectangular-prism roughness elements.  相似文献   

20.
The assumption that the roughness Reynolds number \(( Re_{*})\) can be used as a basis for quantifying the boundary-layer property \({ kB}^{-1} (= \ln (z_{0}/z_{0T}))\) as in some modern numerical models is questioned. While \({ Re}_{*}\) is a useful property in studies of pipe flow, it appears to have only marginal applicability in the case of treeless terrain, as studied in the two experimental situations presented here. For both the daytime and night-time cases there appears to be little correlation between \({ kB}^{-1}\) and \({ Re}_{*}\). For daytime, the present studies indicate that the assumption \({ kB}^{-1} \approx 2\) is acceptable, while for night-time, the scatter involved in relating \({ kB}^{-1}\) to \({ Re}_{*}\) suggests there is little reason to assume a direct relationship. However, while the scatter affecting all of the night-time results is large, there remains a significant correlation between the heat and momentum fluxes upon which an alternative methodology for describing bulk air–surface exchange at night could be constructed. The friction coefficient (\(C_{f}\)) and the turbulent Stanton number \(({ St}_{*})\) are discussed as possible alternatives for describing bulk properties of the air layer adjacent to the surface. While describing the surface roughness in terms of the friction coefficient provides an attractive simplification relative to the conventional methodologies based on roughness length and stability considerations, use of the Stanton number shares many of uncertainties that affect \({ kB}^{-1}\). The transitions at dawn and dusk remain demanding situations to address.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号