共查询到19条相似文献，搜索用时 484 毫秒
1.
离岸深水全直桩码头承载性能有限元分析 总被引：1，自引：0，他引：1
全直桩码头是适于软土地基上离岸深水海域的新型高桩码头结构型式,其承载机理与传统高桩码头存在较大差异,且软土地基循环软化效应显著。建立全直桩码头结构与地基相互作用三维弹塑性有限元模型,基于二次开发采用拟静力法对土体循环软化效应进行模拟。通过有限元模型研究全直桩码头的承载特性与破坏模式,并探讨水平极限承载力的影响因素。研究表明水平荷载作用下,基桩的塑性破坏是结构失稳的控制因素,地基土体的承载力对结构水平极限承载力不起决定性作用;竖向荷载作用下,结构竖向极限承载力由地基土体强度决定。研究范围内入土深度对结构水平极限承载力影响不大,但桩壁厚度减小或考虑土体软化后,结构水平极限承载力明显降低。设计中,增加入土深度可有效减小土体软化引起的水平极限承载力降低程度,且应考虑结构腐蚀和土体软化对水平极限承载力的双重降低效应,为钢管桩预留足够的腐蚀富裕量。 相似文献
2.
在环境条件和使用荷载作用下,高桩码头结构损伤和承载力降低是普遍存在的问题。在役梁板式高桩码头结构安全评估,是保证港口设施安全运行的必要措施。结构整体可靠度是结构安全评估的核心指标,但目前尚未建立结构整体可靠度计算的有效方法。基于非线性有限元数值模型,采用蒙特卡罗模拟技术确定了典型梁板式高桩码头结构整体极限承载力概率分布模型及其统计参数,研究了损伤位置、损伤程度和损伤数量等对极限承载力概率分布及其统计参数的影响,明确了无损结构整体极限承载力概率分布模型及其统计参数可用于损伤结构分析。将结构整体极限承载力作为结构抗力随机变量,采用一次二阶矩法计算结构的可靠指标,建立了一种在役梁板式高桩码头结构整体可靠度计算的有效方法。 相似文献
3.
高桩码头在长期使用过程中结构损伤是普遍存在的问题,有效检测结构损伤特别是隐蔽性部位对保证码头安全运营具有重要作用。利用NExT-ERA模态参数识别算法和模态应变能损伤定位原理,编制模态参数识别和损伤诊断程序。通过数值算例分析,验证环境激励下高桩码头排架基于模态参数识别及模态应变能进行损伤诊断的可行性和准确性。研究结果表明:NExT-ERA模态识别方法能较精确识别出高桩码头排架的动力参数;模态应变能变化率作为损伤诊断指标对损伤单元有较强的敏感性,能够识别出高桩码头不同工况下的损伤。 相似文献
4.
波浪作用下海洋石油井架模态参数识别与承载力评价 总被引：1，自引：0，他引：1
提出基于试验模态参数识别和优化算法修改动力有限元模型的海洋石油井架安全承载能力评价方法.推导基于波浪脉动的试验模态参数识别公式,介绍有限元模型动力修正的一阶优化方法.以海洋随机波浪脉动作为激励,对勘探三号海洋石油井架进行了现场模态试验,识别出前二阶固有频率.以此作为有限元模型修正的基础,应用一阶搜索优化算法,对动力有限元模型进行了修正,结果表明:该修正模型比较准确反映了井架目前的结构状态,能够用于进一步的静、动力分析和安全承载能力评价. 相似文献
5.
为考虑桩土相互作用的高桩码头体系等效阻尼比,将地震作用下高桩码头的滞回耗能定义为各桩塑性铰耗能和桩-土相互作用耗能之和,桩-土相互作用耗能根据p-y曲线和Masing准则定义的滞回环确定,码头结构的塑性铰总耗能为各桩塑性铰耗能的总和,按照正弦激励下一个振动循环内高桩码头体系与相应单自由度体系粘滞耗能相等的原则,推导得到了高桩码头体系等效阻尼比计算公式,并对两个高桩码头进行了Pushover分析。分析表明,土体耗能对高桩码头体系阻尼贡献较大,根据码头各桩塑性铰出现顺序和转动情况计算码头的等效阻尼比更符合实际情况。 相似文献
6.
板格形导管架桩基码头是适用于深水域软土地基的新型港口与海岸工程结构。该结构由预制的板格形导管架及桩基构成,承载特性和破坏模式复杂。假定码头结构发生倾覆失稳时,转动点位于前桩轴线上,且距导管架底面距离为L。除结构的自身重量外,综合考虑板格形导管架与周围土体间的摩擦力、桩侧摩阻力、桩侧水平土抗力等,对结构进行极限状态受力分析,建立基于假想支撑点的稳定性分析模型,并通过强度折减法进行计算,求取安全系数。以天津滨海沿岸水文地质条件为背景,利用ABAQUS有限元分析软件,建立板格形导管架桩基码头三维弹塑性有限元模型进行稳定性分析,并与简化方法进行比较。结果表明,通过简化计算方法得到的安全系数与有限元结果较为吻合。 相似文献
7.
《中国海洋大学学报(自然科学版)》2021,(8)
高桩码头在港口中应用较为广泛,与重力式码头相比,其耐久性较差,因此,其结构可靠度的研究对于工程安全运行至关重要。目前,高桩码头可靠性的研究大多局限于构件层面,特别是忽略了构件失效之间的联系,不能反映整体的安全性能。本文通过ANSYS软件建立高桩码头参数化数值模型,综合考虑失效模式之间的联系,计算码头的水平向极限承载力,进而求解码头的可靠指标。结果表明,本工程实例的码头水平向极限承载力服从正态分布;采用JC法算得码头水平向可靠指标为21.78,码头自身结构在水平向的安全储备较大。本文的分析方法可对高桩码头的设计和安全运营提供技术支持。 相似文献
8.
斜顶桩驳岸结构是一种深水高桩码头接岸结构型式，驳岸结构后进行高回填将是一个复杂的被动桩与土相互作用的问题。采用平面有限元方法，分别建立了后支撑和前支撑斜顶桩驳岸结构的桩一土相互作用模型，桩基采用梁单元模拟，桩一土界面采用接触对进行模拟，进行了高回填施工过程的仿真分析。将承台侧向位移的数值计算结果与原型观测值进行了比较，吻合较好，并对桩身侧向位移、板桩前后土压力以及位移场进行了分析。结果表明：结构的变形随着施工过程进行而变化，承台最大侧向位移发生在施工过程中；不同驳岸结构的被动土压力分布相似，而主动土压力由于支撑桩的位置不同而有所差别；后支撑桩的桩身挠度相对较大。研究结论可为此类结构的设计及计算提供参考，也可为深水港结构型式的优化提供建议。 相似文献
9.
利用遗传算法对大型高桩码头的桩基布置问题建立了离散结构优化模型,通过对上海宝钢30万吨码头桩基优化的算例分析,得到了较常规算法更好的结构方案。 相似文献
10.
本文采用弹性柱(桩)支承空间刚体(码头上部结构分段)的力学模型,分析高桩码头的自由振动特性,并按反应谱方法给出计算水平地震惯性力和惯性扭矩的解析表达式。最后结合例题指出惯性扭矩的作用不容忽视。 相似文献
11.
There has been a growing trend in the development of offshore deep-water ports in China. For such deep sea projects, all-vertical-piled wharves are suitable structures and generally located in open waters, greatly affected by wave action. Currently, no systematic studies or simplified numerical methods are available for deriving the dynamic characteristics and dynamic responses of all-vertical-piled wharves under wave cyclic loads. In this article, we compare the dynamic characteristics of an all-vertical-piled wharf with those of a traditional inshore high-piled wharf through numerical analysis; our research reveals that the vibration period of an all-vertical-piled wharf under cyclic loading is longer than that of an inshore high-piled wharf and is much closer to the period of the loading wave. Therefore, dynamic calculation and analysis should be conducted when designing and calculating the characteristics of an all-vertical-piled wharf. We establish a dynamic finite element model to examine the dynamic response of an all-vertical-piled wharf under wave cyclic loads and compare the results with those under wave equivalent static load; the comparison indicates that dynamic amplification of the structure is evident when the wave dynamic load effect is taken into account. Furthermore, a simplified dynamic numerical method for calculating the dynamic response of an all-vertical-piled wharf is established based on the P-Y curve. Compared with finite element analysis, the simplified method is more convenient to use and applicable to large structural deformation while considering the soil non-linearity. We confirmed that the simplified method has acceptable accuracy and can be used in engineering applications. 相似文献
12.
13.
介绍了广州港新沙港区板桩码头主要内力计算方法及常用软件,结合设计过程、工程地质情况、现场实际施工情况,着重从受力合理性、施工便利性、节省造价方面,对提出的钢板桩方案、钢管板桩方案进行比较分析,确定了钢管板桩结构更合理,并对优势进行总结。研究表明相对于钢板桩结构,钢管板桩结构在抗弯、抗变形、拉杆拉力和锚碇墙稳定性、对复杂地基(软弱土层较厚、岩层标高较高的地基)适应性、兼顾桩基基础、施工速度等方面更具备优势,且钢管板桩结构可更好的适应码头的大型化和深水化发展,在类似工程设计中可优先采用钢管板桩结构。 相似文献
14.
Jacket cutting operation is one of the most complicated and highest risk operations in the process of decommissioning offshore piled platform, the security and stability of which must be assured. In this paper, the current research on offshore structure removal and jacket cutting is introduced, on the basis of which the types of load along with the load calculation method are determined. The main influences on the stability of a jacket in cutting are analyzed. The experiment test plan is drawn by using orthogonal testing method, and the formula of critical load during the cutting procedure is deduced by differential evolution algorithm. To verify the method and results of this paper, an offshore piled platform to be decommissioned in the South China Sea is taken for an example, and the detailed schedule for jacket cutting is made with the three-dimensional finite element model of the jacket established. The natural frequency, stress, strain and stability of the jacket during cutting process are calculated, which indicates that the results of finite element analysis agree well with that of the deduced formula. The result provides the scientific reference for guaranteeing the safety of jacket in cutting operation. 相似文献
15.
Developing a robust SHM method for offshore jacket platform using model updating and fuzzy logic system 总被引：1，自引：0，他引：1
A. Mojtahedi M.A. Lotfollahi Yaghin Y. Hassanzadeh M.M. Ettefagh M.H. Aminfar A.B. Aghdam 《Applied Ocean Research》2011,33(4):398-411
Structural monitoring is essential for ensuring the structural safety performance during the service life. The process is of paramount importance in case of the offshore jacket-type platforms due to the underwater structural parts subjected to the marine environmental conditions. This work is an experimental investigation on a laboratory model of a jacket platform with the objective of establishing a baseline finite element (FE) model for long-term structural health monitoring for this type of structures. A robust damage diagnosis system is also developed which is less sensitive to both the measurements and the modeling uncertainties. Experimental vibration tests are conducted on a physical platform model to obtain dynamic characteristics and then, the initial FE-model of the intact structure is developed to determine them numerically. Some differences between numerically and experimentally identified characteristics emerge due to various uncertainties in the FE-model and measured vibration data. To minimize these differences, initial FE-model is updated according to the experimental results. The updated FE-model is employed to predict the changes in the dynamic characteristics under variety of damage scenarios which are imposed by reducing the stiffness at the components of the model. Fuzzy logic system (FLS) and probabilistic analysis is developed for linguistic classification of damage and global damage diagnosis. Incorporation of the FLS fault isolation technique into FE-model updating method are proposed and evaluated for two different FLS methods to develop a vigorous damage diagnosis method. The efficiency of the technique is validated by different damage scenarios foreseen on the physical model. This technique is shown to be effective for diagnosing the presence of degradation and quantify it. 相似文献
16.
Farhad HOSSEINLOU 《中国海洋工程》2021,(1):96-106
The identification of variations in the dynamic behavior of structures is an important subject in structural integrity assessment.Improvement and servicing of offshore platforms in the marine environment with constant changing,requires understanding the real behavior of these structures to prevent possible failure.In this work,empirical and numerical models of jacket structure are investigated.A test on experimental modal analysis is accomplished to acquire the response of structure and a mathematical model of the jacket structure is also performed.Then,based on the control theory using developed reduction system,the matrices of the platform model is calibrated and updated.The current methodology can be applied to prepare the finite element model to be more adaptable to the empirical model.Calibrated results with the proposed approach in this paper are very close to those of the actual model and also this technique leads to a reduction in the amount of calculations and expenses.The research clearly confirms that the dynamic behavior of fixed marine structures should be designed and assessed considering the calibrated analytical models for the safety of these structures. 相似文献
17.
18.
水下加筋圆柱壳结构声散射特性研究 总被引：1，自引：0，他引：1
采用有限元/边界元(FEM/BEM)方法对水下加筋圆柱壳结构的声散射特性进行分析。考虑入射声场激发弹性结构振动产生二次辐射声场,总声场为入射场与散射场之和。基于Mindlin理论建立结构受迫振动的有限元模型,考虑入射声场为简谐激励,采用模态叠加法求出结构振动表面速度。根据声学边界元相关理论,利用有限元方法计算得出的弹性结构表面动力相应,可求出弹性结构的散射声场。研究结果表明,在同一波数下,不加筋结构后向散射强于加筋结构;加筋结构的散射指向性图案分叉较为明显;同种结构在波数增加的时候后向散射强度逐渐增大,前向散射强度逐渐减弱。 相似文献
19.
应用ANSYS软件建立了平台和冰相互作用的有限元模型,构建了自升式平台的冰激振动模型,并计算基于2种冰力模型的自升式平台的动力响应。此动力分析方法具有建模方便和计算精度高的特点。以某自升式平台为例,计算了冰和平台结构相互作用的耦合效应,为自升式平台冰激振动安全评估提供了参考依据。 相似文献