共查询到10条相似文献，搜索用时 234 毫秒
1.
Shen Huishen
Professor 《中国海洋工程》1996,(4)
- posthuckling analysis is presented for the stilTened cylindrical shell of finite length subjected to combined loading of external liquid pressure and axial compression. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, nonlinear large deflections in the postbuckling range and initial geometrical imperfections of the shell. The "smeared stifl'cner" approach is adopted for the stiffencrs. In the analysis a singular perturbation technique is used (o determine the interactive buckling loads and the postbuckling paths. Numerical examples cover the performance of perfect and imperfect, stringer and ring stiffened cylindrical shells. Typical results arc presented in the dimcnsionless graphical form. 相似文献
2.
Static analysis of stiffened shells has been carried out using an eight-noded isoparametric element for the shell and a three-noded curved beam element for the stiffener. A same displacement function is used for the shell and the stiffener elements. A modified technique has been followed to analyse the shell, which is an improvement over the degenerated shell concept. The stiffness matrix of the curved beam element is generated irrespective of its position and orientation within the shell element. The stiffness matrix of the stiffener is then transferred to all the nodes of the shell element. Numerical examples of stiffened shells with concentric and eccentric stiffeners have been analysed and the results presented together with those available in published literature. 相似文献
3.
环肋圆柱壳体在水下冲击波作用下的动力弹塑性屈曲 总被引：1，自引：0，他引：1
本文以加肋圆柱壳体为对象建立力学模型，在水下爆炸产生的冲击波作用下，考虑流体与结构的耦合效应，研究加肋圆柱壳体的弹塑性失稳变形量及动力响应特性。数值分析显示出的最终变形形状和压力变化过程与实验资料一致的 相似文献
4.
5.
周向变刚度环肋圆柱壳应力分析研究 总被引：1，自引：0，他引：1
采用大曲率梁理论和弹性基础梁带理论，建立潜艇特殊舱段结构的力学模型。利用能量法求出肋位处耐压船体壳板中面周向应力。建立环肋圆柱壳微分方程并根据边界条件求解，得到周向变刚度环肋圆柱壳应力计算方法。通过理论分析和模型试验验证了本计算方法。 相似文献
6.
International Maritime Organization (IMO) adopted a new regulation to request permanent means of access (PMA) for a regular inspection of ship structure. Horizontal platforms for an inspector to walk on should be provided at specified locations. The platform is attached perpendicular to longitudinal bulkheads or side shell like a common longitudinal stiffener. Since the platform is much wider than ordinary stiffeners, a mid-flat-bar is welded in the middle of the platform. The wide platform (i.e. the tall web plate) makes PMA structure prone to lateral torsional buckling prior to overall flexural Euler buckling subjected to axial compression. This study employs the Rayleigh-Ritz method to treat the elastic lateral-torsional buckling of the PMA structure. The deformation of the cross-section can be expressed using six independant parameters. Compared to the previous research for an ordinary stiffened plate (Hughes and Ma, 1996a), two additional parameters are employed to model the deformation of the mid flat bar. This study also proposes a new strain distribution of lateral bending introducing two respective neutral axes for the flange and the mid-flat-bar. Two mathematical models are developed for two cases; one without associated plating, and the other with both the plating and its rotational restraint. In the former, the coupling between the lateral torsional buckling (“tripping”) and the Euler buckling is investigated. In the latter, a plate rotational spring constant is suggested based on extended deformed shape of the plating. For each model, the validity of the proposed method is verified by a comparison with a number of linear buckling analyses carried out using the NASTRAN finite-element program. 相似文献
7.
The dynamic torsional buckling and post-buckling of elasto-plastic circular cylindrical shell isstudied.By the usage of the Bodner-Partom constitutive relation,the present visco-plastic problem is treat-ed as an orthotropic elastic problem.Based on the nonlinear large deflection shell therory,the governingdynamic buckling equation is solved by the Runge-Kutta method,and the critical buckling stress is deter-mined by the B-R criterion.The present paper is mainly focused on the imperfection sensitivity,the strainrate sensitivity,and the dynamic post-buckling characters for the shell loaded dynamically with a constantshear strain rate.Numerical results show that the critical shear stress and imperfection sensitivity will in-crease with the increase of strain rate.It is found that the elastic buckling stress is more sensitive toimperfection than the visco-plastic buckling.The present research also reveals some dynamic post-bucklingcharacters for the cylindrical shell,and it is shown that the shell will vibra 相似文献
8.
This study investigated the linear and nonlinear dynamic responses of three cylindrical shell structures subjected to underwater small charge explosions in a 4 m×4 m×4 m water tank. The dimensions of the cylindrical shell structures were 90 cm×30 cm×1 mm (length×diameter×thickness). Both ends of the cylindrical shell were mounted with thick plates to provide support and create an enclosed space. The three cylindrical shell structures were un-stiffened, internally stiffened and externally stiffened, respectively. The experiments involving the dynamic response of cylinders subjected to underwater explosion (UNDEX) were performed under different standoff distances, varying from 210 to 35 cm. A small quantity of explosives was used to generate the shock loading. The plastic deformation of the cylindrical shell was observed at a standoff distance of less than 50 cm. Other conditions were tested to examine cylinder linear response. Dynamic analyses were performed for the experimental model using FEM and compared with the test results. The accelerations and dynamic strains of cylindrical shells obtained from the experiment were compared with those obtained by FE analysis. Finally, problems related to small-scale UNDEX experiments performed in small water tanks were analyzed. 相似文献
9.
水下加筋圆柱壳结构声散射特性研究 总被引：1，自引：0，他引：1
采用有限元/边界元(FEM/BEM)方法对水下加筋圆柱壳结构的声散射特性进行分析。考虑入射声场激发弹性结构振动产生二次辐射声场,总声场为入射场与散射场之和。基于Mindlin理论建立结构受迫振动的有限元模型,考虑入射声场为简谐激励,采用模态叠加法求出结构振动表面速度。根据声学边界元相关理论,利用有限元方法计算得出的弹性结构表面动力相应,可求出弹性结构的散射声场。研究结果表明,在同一波数下,不加筋结构后向散射强于加筋结构;加筋结构的散射指向性图案分叉较为明显;同种结构在波数增加的时候后向散射强度逐渐增大,前向散射强度逐渐减弱。 相似文献
10.
In this study,an FEM-SBFEM(scaled boundary finite element method)coupling procedure proposed by Fan et al.(2005)is adopted to obtain the dynamic responses of a submerged cylindrical shell subjected to plane step or exponential acoustic shock waves.The coupling procedure can readily be applied to three-dimensional problem,however for clarity,the problems to be presented are limited to two-dimensional domain.In the analyses,the cylindrical shell is modeled by simple beam elements(using FEM),while the effects of the surrounding infinite fluid is modeled by the SBFEM.In it,no free surface and seabed are involved.Compared with Fan and his co-authors' works,the FEM-SBFEM coupling procedure is further verified to be feasible for shock waves by benchmark examples.Furthermore,parametric studies are performed and presented to gain insight into effects of the geometric and material properties of the cylindrical shell on its dynamic responses. 相似文献