共查询到10条相似文献，搜索用时 328 毫秒
1.
Initial stage of incompressible liquid impact onto a corrugated elastic panel with account for compressible gas trapping between the corrugations is studied. The liquid free surface is flat and parallel to the panel before impact. The impact velocity is constant in this study. The corrugations are modelled as identical rigid short structures on the surface of the flat panel. The panel is either of infinite or finite length. There are only two corrugations which are placed symmetrically on the panel. Only a part of the panel between these two corrugations is elastic. The liquid free surface closes the gas cavity between the two corrugations at the initial instant of impact and compresses the gas before the fluid comes in contact with the elastic part of the panel. The elastic deflections of the panel are caused by gas pressure in the cavity. The elastic deflections modify both the pressure in the cavity and the hydrodynamic pressure distribution along the wetted part of the panel. The hydroelastic problem is solved within the Wagner approach. The effect of gas compressibility on the elastic behaviour of the corrugated elastic panel is investigated. It is shown that the pressure in the gas cavity and elastic deflections grow beyond all bounds for the panel of infinite length and are finite if the panel is of finite length. The present model is relevant for the strength assessment of the cargo containment system (CCS) in the tanks of LNG carriers. 相似文献
2.
随着薄膜型LNG运输船的需求量不断增加,晃荡载荷已成为船舶安全性研究的重要内容之一。本文结合中国船级社规范所推荐的公式,对薄膜型LNG船晃荡水平的载荷进行研究,提出载荷计算方法和流程,在MSC.patran的基础上结合二次开发语言PCL,设计了一套晃荡载荷计算与校核系统。该系统对有限元模型进行前后处理,设计了舱室识别算法来搜索晃荡载荷的作用域,实现薄膜型LNG船晃荡载荷的自动计算与施加,完成屈服强度评估。通过算例测试证明本系统自动计算结果的有效性和准确性,可以为工程设计人员大大节约工作量,大幅度提高工作效率。 相似文献
3.
The violent motion (sloshing) of liquefied natural gas (LNG) in cargo tanks has attracted significant attention. Transformations of the LNG market have led to the increased transport of LNG in partially filled tanks, but established technology is mainly based on engineering experience with completely filled containers. This paper investigates a large sample of sloshing pressure measurements. It focuses on the magnitude of individual sloshing impact events, and their associated temporal and spatial patterns. The durations of these impacts are comparable to the natural frequency of an LNG container wall, so the details of their time histories are important in determining the structural response. Experiments are performed on tanks with high (92.5%) and low (30%) filling levels, for various wave headings. The common post-processing approach of representing impact pressure histories by a triangular profile is studied, and an alternative approach is presented. Two statistical models are used to describe the distribution of maximal pressures in sloshing impacts: a three-parameter Weibull model and a generalized Pareto model. The latter is found to be of questionable utility due to small sample sizes. It is observed that for low filling levels the sloshing impacts are of greater magnitude, having longer durations, smaller ratios of rise time to duration, and larger spatial extents. All these factors should in principle increase the structural response. 相似文献
4.
The paper presents a theoretical and an experimental investigation into the plastic collapse of circular steel corrugated cylinders under external hydrostatic pressure. The experimental investigation gives a detailed study of 9 steel corrugated cylinders which were tested to destruction. Six of these cylinders failed by plastic non-symmetric bifurcation buckling and three failed by plastic axisymmetric deformation. The results of these tests were used, together with the results obtained from previous tests, to present a design chart for the plastic collapse of these vessels. The design chart was obtained by a semi-empirical approach, where the thinness ratios of the vessels were plotted against their plastic knockdown factors. The process of using the design chart is to calculate the theoretical elastic instability pressure for a perfect vessel by the finite element method and also to calculate the thinness ratio for this vessel. Using the appropriate value of the thinness ratio, the plastic knockdown factors are obtained from the design chart. To obtain the actual collapse pressure of the vessel, the theoretical elastic instability pressure for a perfect vessel is divided by the plastic knockdown factor. This work is of importance in ocean engineering. A large safety factor must also be introduced. 相似文献
5.
Resistance and propulsion characteristics of various commercial ships based on CFD results 总被引：2，自引：0，他引：2
This paper uses computational tools to examine the speed performance of various types of commercial ships including resistance and propulsion characteristics. Eight commercial ships built in the last decade were selected for the study. They include four large-sized container carriers, one bulk carrier, one VLCC, and two LNG carriers. The Reynolds averaged Navier-Stokes equation has been utilized, and the computations were executed under the same conditions of the model tests to predict the speed performance, i.e., resistance and self-propulsion. The self-propulsion point was obtained from load-varying tests. The speed performance was predicted based on the model-ship performance analysis method of the revised ITTC’78 method. The limiting streamlines on the hull, wave characteristics around the model ship, and the wake characteristics on the propeller plane were also investigated. After completing the computations, a series of model tests were conducted to evaluate the accuracy of the computational predictions. The predictions clearly reveal the differences in the resistance and propulsion characteristics regarding the various types of commercial ships, and may be applicable to hull-form design. 相似文献
6.
近年来大直径钢圆筒结构在离岸人工岛工程中得到应用，如港珠澳大桥人工岛即采用振动下沉的方式安装钢圆筒，该方法对施工条件、装备以及施工控制技术要求较高。提出一种新型隔舱吸力式钢圆筒结构，在钢圆筒内部设置隔舱板，将结构分为上下两个隔舱，通过对下舱抽气实现隔舱吸力式钢圆筒在负压作用下的下沉安装。设计了隔舱吸力式钢圆筒安装及水平承载力模型试验，对比了负压贯入的隔舱吸力式钢圆筒和压力贯入的传统钢圆筒结构的贯入阻力及承载特性，分析了改变隔舱吸力式钢圆筒上下舱高度比L1/L2对其沉贯过程及承载特性的影响。结果表明，采用负压吸力沉贯的隔舱吸力式钢圆筒相比于采用压力贯入的传统钢圆筒结构的贯入阻力减小，水平极限承载力提高。在极限水平荷载作用下，随着隔舱吸力式钢圆筒的L1/L2从2.28减小到1.00、0.56，转动中心位置上移，水平极限承载力及弯矩承载力得到显著提高。 相似文献
7.
A reliability based approach for analysis of offloading operations with two identical LNG carriers moored in a side-by-side configuration is suggested. The approach, although adopted for two tankers, is generally applicable to different types of LNG terminals. Different heading controls are conceivable for the discharging vessel in the case that the heading is not fixed: heading toward wind-sea, heading toward swell, heading toward wind and free weather vaning. The analyses show that heading toward the governing sea state is the most beneficial option for two identical LNG carriers moored in a side-by-side configuration. Strategies are discussed for estimation of limiting weather criteria that are consistent with prescribed target failure probabilities. 相似文献
8.
The problem of liquid sloshing has gained recent attention with the proliferation of liquefied natural gas (LNG) carriers transporting liquids in partially filled tanks. Impact pressures caused by sloshing depend on the tank fill level, period and amplitude of oscillation of the tank. In this paper, we first present the rudiments of a linear potential theory for sloshing motions in a two-dimensional rectangular tank, due to small amplitude sway motions. Although this topic is fundamental, we clarify inconsistencies in the published literature and texts.Numerical investigations were carried out on the sloshing motions in a two-dimensional tank in the sway excitation. The fluid domain was modeled using a finite volume approximation, and the air–water interface was tracked using a volume-of-fluid (VOF) technique. Computational results for free surface elevation and impact pressure are found to be in good agreement with theory and published data. The fill levels were varied from 10% to 95%, and the excitation time periods were varied from 0.8 to 2.8 s for a constant sway amplitude of 0.25 m (peak–peak) at 1:30 scale. The results of the parametric study are compared with theoretical predictions and suggestions are made on incorporating sloshing effects in standard seakeeping analysis for LNG carriers. 相似文献
9.
Samir Mankabady 《Marine Policy》1979,3(3):225-231
The author examines the various methods of finance for LNG carriers at each stage of funding. First, he describes the various factors involved in the funding of LNG carriers, and continues by highlighting the different methods of finance. He concludes by summarizing the prospects for shipping finance in a severely depressed ship sale and purchase market. 相似文献
10.
Errors will be caused in calculating the fatigue damages of details in liquid cargo tanks by using the traditional spectral analysis method which is based on linear system, for the nonlinear relationship between the dynamic stress and the ship acceleration. An improved spectral analysis method for the assessment of the fatigue damage in detail of a liquid cargo tank is proposed in this paper. Based on assumptions that the wave process can be simulated by summing the sinusoidal waves in different frequencies and the stress process can be simulated by summing the stress processes induced by these sinusoidal waves, the stress power spectral density (PSD) is calculated by expanding the stress processes induced by the sinusoidal waves into Fourier series and adding the amplitudes of each harmonic component with the same frequency. This analysis method can take the nonlinear relationship into consideration and the fatigue damage is then calculated based on the PSD of stress. Take an independent tank in an LNG carrier for example, the accuracy of the improved spectral analysis method is proved much better than that of the traditional spectral analysis method by comparing the calculated damage results with the results calculated by the time domain method. The proposed spectral analysis method is more accurate in calculating the fatigue damages in detail of ship liquid cargo tanks. 相似文献