首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
提出了一种新的利用X波段海洋雷达联合反演海面风速与海浪谱的方法,该方法不需要额外的信息输入来反演海浪谱。通过利用风速与雷达后向散射强度的经验关系获得海表风速,然后将反演的风速输入风浪谱,通过求解该模拟风浪谱与雷达观测图像谱的约束函数的最小值来确定海浪谱。利用实验数据对反演方法进行了验证,风速、有效波高、主波周期以及主波波向反演的均方根误差分别为1.9 m/s,0.4 m,1.2 s和9.6°,证明了该方法的可行性。  相似文献   

2.
海面有效波高(H1/3)是表征海浪的重要参数,随着卫星遥感技术的发展,雷达高度计已成为获取海面有效波高的重要手段,但也只能对卫星星下点轨迹处进行有效观测,远无法满足大范围应用的需求.本研究结合2013年10月HY-2雷达高度计观测的海面有效波高和微波散射计观测的海面风场资料,分别对高、低风速下风浪数据进行拟合,建立了适用于0~40 m/s风速范围内的南海海域风浪关系模型,经模型比对和结果验证,结果表明,基于HY-2卫星数据分析建立的南海海域风浪关系模型是可信的,特别是低风速的风浪模型与实测数据建立的风浪模型具有很好的一致性;根据建立的风浪关系模型,从卫星散射计大面观测的海面风场出发,能推算出风浪条件下海面有效波高的大面信息,数据覆盖远高于卫星高度计的星下点观测,能为分析和预报海浪、风暴潮灾害提供大范围的海面有效波高信息.  相似文献   

3.
史剑  蒋国荣 《海洋与湖沼》2015,46(6):1255-1262
风浪状态参数常用于对海面粗糙度的参数化。中等风速条件下考虑风浪状态参数影响的海面粗糙度参数化方案常存在自相关效应,本文通过分析实测数据得到了无量纲粗糙度随波陡变化的参数化方案,该方案能够有效去除自相关效应;高风速下风浪状态对海面粗糙度仍存在影响,文中基于新得出的中等风速下的海面粗糙度参数化方案,考虑海面飞沫悬浮层的影响,建立了适用于高风速条件下的海面粗糙度参数化方案,该海面粗糙度方案同样考虑了波陡的作用,将该方案计算出的理论值与实测数据进行比对,发现随着波陡的变化,理论值基本涉及测量值的覆盖范围,说明新建立的高风速条件下海面粗糙度方案对海面风浪状态具有较好的敏感性,且该方案能够较合理地描述海气界面之间动量传输。将新提出的适用于高风速下的海面粗糙度方案加入到海浪数值模式中,模拟飓风Ivan产生的台风浪,利用浮标数据进行验证,结果显示模拟的有效波高相对模式默认方案具有较高的精度,说明采用本文新建立的适合高风速的海面粗糙度方案能够改进海浪模式的台风浪有效波高模拟结果。  相似文献   

4.
Aquarius是NASA于2011年6月发射的基于主被动遥感技术的盐度观测卫星,其主要载荷是一个工作于L波段的微波辐射计。Aquarius天线三波束扫描刈幅可达390km,在7d内完成对全球海域的盐度观测。海面风浪导致海面粗糙度的变化,进而影响海面微波辐射特性。粗糙海面辐射亮温是盐度信息提取的重要误差源,需要发展相应的海面辐射模型进行修正。本文利用Aquarius观测的海表亮温数据,与扫描微波辐射计WindSat测量数据进行时空匹配,建立了一个描述粗糙海面L波段辐射特性的参数化模型,进而利用该模型进行了海表盐度反演,并将反演结果与Argo实测盐度数据进行了比较。结果表明,本文发天展的参数化模型可以准确描述中低风速条件下的粗糙海面辐射,在12m/s以上高风速条件下对粗糙海面亮温存在高估;采用此模型反演的盐度误差优于0.5,在高风速条件下盐度反演误差可超过1。  相似文献   

5.
西沙、南沙海域波浪及波浪能季节变化特征   总被引:4,自引:0,他引:4       下载免费PDF全文
采用来自ECMWF将风浪、涌浪分离的近45 a ERA-40海浪再分析资料,对西沙和南沙海域的海面风速、风浪有效波高、涌浪有效波高、浪级频率、波向频率的多年变化特征进行统计研究,重点讨论了西沙和南沙海域风浪能和涌浪能季节变化和稳定性特点.结果表明:南海海域涌浪能明显比风浪能稳定,西沙海域年均能流密度约8.0kW/m,风...  相似文献   

6.
本文根据相干斑噪声的时间快变特征和非海浪纹理现象的时间缓变特征,基于交叉谱提出了一种对相干斑噪声和大尺度非海浪纹理的抑制的方法,进而结合SAR图像谱和海浪谱之间的准线性映射关系,基于SAR数据对海浪参数进行了反演。在反演过程中,首先仿真分析了不同海况下准线性近似法的海浪反演能力,结果表明:风浪引起的方位向截断效应会显著影响反演精度,因此该方法在低风速时的涌浪反演精度更高。通过将基于Sentinel-1卫星2020年的波模式SAR数据的反演结果与欧洲中期天气预报中心(European Centre for Medium-Range Weather Forecasts, ECMWF)提供的再分析数据进行对比,发现高海况海浪有效波高反演结果明显偏低,而且该反演误差与风速、方位向截断波长之间存在显著相关性。为了提高有效波高的反演精度,本文进一步给出了海浪有效波高反演误差与风速、方位向截断波长之间的经验校正函数模型,结果显示,通过该模型修正后的海浪有效波高反演结果与ECMWF数据和浮标测量数据具有良好一致性。  相似文献   

7.
基于SAR图像雨团足印的海面风向提取方法   总被引:1,自引:1,他引:0  
利用地球物理模式函数进行SAR海面风速反演时,需以风向作为地球物理模式函数的输入。本文应用了一种利用SAR图像上雨团足印顺风一侧比逆风一侧明亮的图像特征的海面风向提取方法,以进行海面风速反演。4景RADARSAT-2卫星SAR示例数据风向提取结果相对于ASCAT散射计的风向均方根误差满足不大于16°。分别以本文方法提取的风向和ASCAT散射计风向作为输入,利用地球物理模式函数CMOD5进行海面风速的SAR反演,两者的风速反演结果基本一致,其均方根误差差值不超过0.3 m/s。本文利用SAR图像雨团足印信息的风向提取方法准确可靠,可应用于SAR海面风速反演。  相似文献   

8.
OSMAR-S系列便携式高频地波雷达系统采用单极子/交叉环紧凑型天线阵,通过单站雷达即可实现有效探测距离约10km内海浪和海面风的单点观测。为了更好地了解OSMAR-S100雷达系统海浪和海面风的综合探测性能,于2013年1月29日至3月7日在台湾海峡西南部海域进行了雷达与浮标观测的对比试验,得到了有效波高、有效波周期、平均风速和平均风向数据。对比结果表明,OSMAR-S100便携式高频地波雷达可有效观测距雷达10km以内有效波高0.5m以上的海浪平均状况和平均风速5m/s以上的海面风,雷达反演有效波高和有效波周期的均方根误差分别为0.60m和1.60s,反演平均风速和平均风向的均方根误差为1.83m/s和16.7°。在未经区域化标定的情况下,此结果说明了该型雷达产品已初步具备了海浪和海面风的业务化观测水平。  相似文献   

9.
粗糙海面L 和C 双波段的代价函数多参量遥感反演分析   总被引:1,自引:0,他引:1  
齐震  魏恩泊  刘淑波 《海洋科学》2012,36(1):100-107
利用代价函数(cost function)方法,通过分析粗糙海面L和C双波段多极化遥感亮温对海表盐度、温度、风速和有效波高等参数的敏感性以及L和C双波段多极化的代价函数收敛特性,建立了反演海表盐度、温度、风速和有效波高等多参数的L和C双波段多极化代价函数模式。双波段遥感模式分析结果表明:(1)对于双参数的联合反演,L和C双波段垂直极化代价函数联合反演海表盐度和温度可以获得较好的反演结果。(2)L波段垂直极化和C波段水平极化代价函数联合反演海表盐度和风速较好。(3)对于三参数联合反演,L波段垂直极化和C波段的双极化联合反演盐度、温度和风速的精度较高。(4)L波段亮温对有效波高的敏感性较低(C波段经验模式不含有效波高),使得有效波高反演误差较大,L和C波段经验模式不适合反演有效波高参数。另外,为了定量分析L和C双波段代价函数的多参量遥感反演结果,采用加性噪音模拟亮温方法,对上述L和C双波段多极化模式的盐度、温度和风速等多参数联合反演误差进行了分析,均得出较好的结果。结论表明L和C双波段代价函数联合反演多参量可以明显提高参量反演精度,为粗糙海表面多参量的反演提供了新的方法和途径。  相似文献   

10.
基于雷达高度计增益自动控制数据的风速反演算法研究   总被引:1,自引:1,他引:0  
基于Jason-1卫星雷达高度计与NDBC(National Data Buoy Center)浮标的时空匹配数据集,利用BP(Back Propagation)神经网络方法建立了基于后向散射系数σ0与有效波高(Significant Wave Height,SWH,)的双参数(σ0-Hsw)风速反演模型,并探讨利用AGC(Automatic Gain Control)来代替σ0对风速反演的可行性进行研究。结果表明,所建立的σ0-SWH风速反演均方根优于0.3 m/s(风速范围为0.5~20 m/s); AGC-SWH模型反演精度偏低(1.3 m/s),但在星星交叉定标的基础上,模型精度提高了0.9 m/s。这个研究工作尤其是交叉定标基础上的AGC-SWH模型反演流程对"HY-2"海面风速反演有一定的借鉴意义。  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

13.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

14.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

15.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

16.
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.  相似文献   

17.
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.  相似文献   

18.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.  相似文献   

19.
20.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号