首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 140 毫秒
1.
The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment sound velocity is one of the main parameters. On seven sediment cores collected from the Bering Sea and Chukchi Sea during the 5th Chinese National Arctic Research Expedition, sound velocity measurements were made at 35, 50, 100, 135, 150, 174, 200, and 250 k Hz using eight separate pairs of ultrasonic transducers. The measured sound velocities range from 1 425.1 m/s to 1 606.4 m/s and are dispersive with the degrees of dispersion from 2.2% to 4.0% over a frequency range of 35–250 k Hz. After the sound velocity measurements, the measurements of selected geotechnical properties and the Scanning Electron Microscopic observation of microstructure were also made on the sediment cores. The results show that the seafloor sediments are composed of silty sand, sandy silt, coarse silt, clayey silt, sand-silt-clay and silty clay. Aggregate and diatom debris is found in the seafloor sediments. Through comparative analysis of microphotographs and geotechnical properties, it is assumed that the large pore spaces between aggregates and the intraparticulate porosity of diatom debris increase the porosity of the seafloor sediments, and affect other geotechnical properties. The correlation analysis of sound velocity and geotechnical properties shows that the correlation of sound velocity with porosity and wet bulk density is extreme significant, while the correlation of sound velocity with clay content, mean grain size and organic content is not significant. The regression equations between porosity, wet bulk density and sound velocity based on best-fit polynomial are given.  相似文献   

2.
Locating the quantitized natural sediment fingerprints is an important work for marine sediment dynamics study.The total of 146 sediment samples were collected from the Shelf of the East China Sea and five rivers,including Huanghe (Yellow),Changjiang (Yangtze),Qiantang,Ou and Min River.The sediment grain size and the contents of rare earth elements (REEs) were measured with laser particle size analyzer and ICP-MS technology.The results show that absolute REE content (ΣREE) and the concentration ratio of light REEs to heavy REEs (L/HREE) are different in the sediments among those rivers.There are higher REE contents in being less than 2 m and 2–31 μm fractions in the Changjiang Estuary surface sediments.The REE contents of bulk sediment are dominated by the corresponding values of those leading size-fractions.REE of sediment is higher close to the estuaries and declines seaward on the inner shelf of the East China Sea (ECS).The L/HREE ratio has a tendency of increase southward from 28 ? N.Hydrodynamic conditions plays a predominate role on spacial distributions of the surficial sediment’s REE parameters.In some situations,the currents tend to remove the coarser light grains from initial populations,as well as the deposit of the finer heavy mineral grains.In other situations,the currents will change the ratio of sediment constituents,such as ratio between silts and clays in the sediments.As a result,the various values of REE or L/HREE ratio in different bulk sediments are more affected by the change of size-fractions than source location.Under the long-term stable hydrodynamic environment,i.e.,the East China Sea Shelf,new sediment transport model based on the size and density gradation concept may help to understand the spatial distribution patterns of REE parameters.  相似文献   

3.
The upper part of the continental slope in the northern South China Sea is prone to submarine landslide disasters,especially in submarine canyons. This work studies borehole sediments, discusses geotechnical properties of sediments, and evaluates sediment stability in the study area. The results show that sediment shear strength increases with increasing depth, with good linear correlation. Variations in shear strength of sediments with burial depth have a significantly greater rate of change in the canyon head and middle part than those in the canyon bottom. For sediments at the same burial depth, shear strength gradually increased and then decreased from the head to the bottom of the canyon, and has no obvious correlation with the slope angle of the sampling site. Under static conditions, the critical equilibrium slope angle of the sediments in the middle part of the canyon is 10° to 12°, and the critical slope angle in the head and the bottom of the canyon is 7°. The results indicate that potential landslide hazard areas are mainly distributed in distinct spots or narrow strips on the canyon walls where there are high slope angles.  相似文献   

4.
红树林海岸的沉积物输运和碳沉降特征   总被引:1,自引:0,他引:1  
Mangroves play an important role in sequestering carbon and trapping sediments. However, the effectiveness of such functions is unclear due to the restriction of knowledge on the sedimentation process across the vegetation boundaries. To detect the effects of mangrove forests on sediment transportation and organic carbon sequestration, the granulometric and organic carbon characteristics of mangrove sediments were investigated from three vegetation zones of four typical mangrove habitats on the Leizhou Peninsula coast. Based on our results, sediment transport was often "environmentally sensitive" to the vegetation friction. A transition of the sediment transport mode from the mudflat zone to the interior/fringe zone was often detected from the cumulative frequency curve. The vegetation cover also assists the trapping of material, resulting in a significantly higher concentration of organic carbon in the interior surface sediments. However, the graphic parameters of core sediments reflected a highly temporal variability due to the sedimentation process at different locations. The sediment texture ranges widely from sand to mud, although the sedimentary environments are restricted within the same energy level along the fluvial-marine transition zone. Based on the PCA results, the large variation was mainly attributed to either the mean grain size features or the organic carbon features. A high correlation between the depth and δ13C value also indicated an increasing storage of mangrove-derived organic carbon with time.  相似文献   

5.
In order to study the properties of sound-speed dispersion in a sandy sediment, the sound speed was measured both at high frequency (90-170 kHz) and low frequency (0.5-3 kHz) in laboratory environments. At high frequency, a sampling measurement was conducted with boiled and uncooked sand samples collected from the bottom of a large water tank. The sound speed was directly obtained through transmission measurement using single source and single hydrophone. At low frequency, an in situ measurement was conducted in the water tank, where the sandy sediment had been homogeneously paved at the bottom for a long time. The sound speed was indirectly inverted according to the traveling time of signals received by three buried hydrophones in the sandy sediment and the geometry in experiment. The results show that the mean sound speed is approximate 1710-1713 m/s with a weak positive gradient in the sand sample after being boiled (as a method to eliminate bubbles as much as possible) at high frequency, which agrees well with the predictions of Biot theory, the effective density fluid model (EDFM) and Buckingham''s theory. However, the sound speed in the uncooked sandy sediment obviously decreases (about 80%) both at high frequency and low frequency due to plenty of bubbles in existence. And the sound-speed dispersion performs a weak negative gradient at high frequency. Finally, a water-unsaturated Biot model is presented for trying to explain the decrease of sound speed in the sandy sediment with plenty of bubbles.  相似文献   

6.
In order to study the properties of sound-speed dispersion in a sandy sediment, the sound speed was measured both at high frequency(90–170 k Hz) and low frequency(0.5–3 k Hz) in laboratory environments. At high frequency, a sampling measurement was conducted with boiled and uncooked sand samples collected from the bottom of a large water tank. The sound speed was directly obtained through transmission measurement using single source and single hydrophone. At low frequency, an in situ measurement was conducted in the water tank, where the sandy sediment had been homogeneously paved at the bottom for a long time. The sound speed was indirectly inverted according to the traveling time of signals received by three buried hydrophones in the sandy sediment and the geometry in experiment. The results show that the mean sound speed is approximate 1710–1713 m/s with a weak positive gradient in the sand sample after being boiled(as a method to eliminate bubbles as much as possible) at high frequency, which agrees well with the predictions of Biot theory, the effective density fluid model(EDFM) and Buckingham's theory. However, the sound speed in the uncooked sandy sediment obviously decreases(about 80%)both at high frequency and low frequency due to plenty of bubbles in existence. And the sound-speed dispersion performs a weak negative gradient at high frequency. Finally, a water-unsaturated Biot model is presented for trying to explain the decrease of sound speed in the sandy sediment with plenty of bubbles.  相似文献   

7.
The production of fine sediments coated with radioisotopes to act as a tracer in studying the movement of dredging spoil involves some physical and chemical treatment of the sediment. The treatment can affect the electrochemical properties of the sediment and hence its behaviour in fresh and saline water. The effect of these changes on the degree of flocculation of the sediment has been studied by measuring the fall velocity distribution in a 4.4m settling column. The results of these tests show that the coating of inactive gold or silver on to natural sediment without any other pretreatment results in a tracer sediment having fall velocities similar to those of natural sediment. Other pretreatments result in variations in the fall velocity distributions owing to different degrees of flocculation induced by the chemical treatments. An artificial sediment consisting of finely ground scandium glass was also tested for comparison.  相似文献   

8.
Based on the test data in dynamic water and static water, the main factors, which influence the fine sediment flocculation, are analyzed with a gray model method of correlation theory. It is shown that the main influencing factors are water temperature, settling time, salinity, grain size, sediment concentration and current velocity according to the correlation coefficients. Among them, the salinity and the sediment grain size are critical type influencing factors (CrTIF); the settling time, the sediment concentration and the velocity are continuous type influencing factors (CoTIF); and the water temperature has the characteristics of both. When the critical values of CrTIF are reached or exceeded, the fine sediments will be flocculated, but values of CrTIF will not influence the settlement strength of floes. The influence of CoTIF is continuous. The values of the CoTIF will not only influence the occurrence of flocculation but also the settlement strength of the floes.  相似文献   

9.
Hydrothermal materials in deep-sea sediments provide a robust tracer to the localized hydrothermal activity at mid-ocean ridges. Major, trace and rare earth element(REE) data for surface sediments collected from the ultraslow spreading Southwest Indian Ridge are presented to examine the existence of hydrothermal component.Biogenic carbonate oozes dominate all the sediment samples, with CaO content varying from 85.5% to 89.9% on a volatile-free basis. The leaching residue of bulk sediments by ~5% HCl is compositionally comparable to the Upper Continental Crust(UCC) in SiO_2, Al_2O_3, CaO, MgO, alkali elements(Rb, Cs) and high field strength elements(Nb, Ta, Zr, Hf, Ti). These detritus-hosted elements are inferred to be prominently derived from the Australian continent by means of eolian dust, while the contribution of local volcaniclastics is insignificant. In addition, the residual fraction shows a clear enrichment in Fe, Mn, and Ba compared with the UCC. Combining the positive Eu anomaly of residual fraction which is opposed to the UCC but the characteristic of hydrothermal fluids and associated precipitates occurred at mid-ocean ridges, the incorporation of localized hydrothermal component can be constrained. REE mixing calculations indicate that more than half REE within the residual fraction(~55%–60%) are derived from a hydrothermal component, which is inferred to be resulted from a diffuse fluid mineralization. The low-temperature diffuse flow may be widely distributed along the slow-ultraslow spreading ridges where crustal faults and fissures abound, and probably have a great mineralization potential.  相似文献   

10.
An understanding of the sedimentary environment in relation to its controlling factors is of great importance in coastal geomorphology,ecology,tourism and aquaculture studies.We attempt to deal with this issue,using a case study from the Xincun Lagoon,Hainan Island in southern China.For the study,surficial sediment samples were collected,together with hydrodynamic and bathymetric surveys,during August 2013.Numerical simulation was carried out to obtain high-spatial resolution tidal current data.The sediment samples were analyzed to derive mean grain size,sorting coefficient,skewness and kurtosis,together with the sand,silt and clay contents.The modern sedimentary environments were classified using system cluster and principal component analyses.Grain size analysis reveals that the sediments are characterized by extremely slightly sandy silty mud(ESSSM) and slightly silty sand(SSS),which are distributed in the central lagoon and near-shore shallow water areas,respectively.Mean grain size varies from 0 to 8.0Ф,with an average of 4.6Ф.The silt content is the highest,i.e.,52% on average,with the average contents of sand and clay being 43% and 5%,respectively.There exists a significant correlation between mean size and water depth,suggesting that the surficial sediments become finer with increasing water depth.Cluster analyses reveals two groups of samples.The first group is characterized by mean grain size of more than 5.5Ф,whilst the second group has mean grain size of below 3.5Ф.Further,these groups also have different correlations between mean grain size and the other grain size parameters.In terms of the tidal current,the average values of the root mean square velocity(RMSV) are 7.5 cm/s and 6.9 cm/s on springs and neaps,respectively.For the RMSVs that are higher than 4 cm/s,a significant positive correlation is found between the content of the 63–125 μm fraction and the RMSV,suggesting that the RMSV determines the variability of the very fine sand fraction.Based on system cluster and principal component analyses(PCA),the modern sedimentary environments are classified into three types according to the grain size parameters,RMSVs and water depth data.The results suggest the importance of grain size parameters and high-spatial resolution hydrodynamic data in differentiating the coastal sedimentary environments.  相似文献   

11.
根据南黄海中部海底沉积物柱状样的实验室土工试验测试结果,分析沉积物的物理特征,并通过实验室方法获得沉积物压缩波速,探讨物理参数与压缩波速的相关关系,得到经验公式。结果表明:该区域沉积物以淤泥和淤泥质黏土为主,具有含水率高、孔隙比大、塑限高等特征;物理参数与压缩波速之间有较好的相关关系,密度、孔隙比、含水率、塑限、液限及塑性指数与压缩波速的相关性最明显,其中,密度与压缩波速成正比相关关系,而孔隙比、含水率、塑限、液限和塑性指数与压缩波速成反比相关关系;以沉积物天然密度和塑性指数为自变量的双变量回归分析方程能更好地表达沉积物物理特性与压缩波速的相关关系。  相似文献   

12.
Acouso-physical properties of sea floor sediments in the southeast offshore sea area of Hainan Island on the northern continental shelf of the South China Sea are analyzed. In many cruises, conductivity-temperature-depth measurements of seawater, measurements of shallow stratum and side-scan sonar have been made. Acoustic parameters, basic sedimentary parameters, physical-mechanical parameters and 14C age, etc., have been measured. The sediment elastic parameters, including Young's modulus, bulk modulus, constrained modulus, rigidity modulus, Poisson's ratio, Lames constant, etc., have been calculated. Results show that the compression wave velocity of the seafloor sediment in the sea area ranges from 1474–1700 m/s, and there are high and low sound velocity sediment types in the different sea areas; the shear wave velocity is 150–600 m/s; at 100 kHz the sediment sound attenuation is 35–260 dB/m, the sediment density is 1.4–2.0 g/cm3; the sediment porosity is 42–88%. Sound field parameters and describing sound reciprocity between sea and seafloor are described.  相似文献   

13.
南海北部大陆架海底沉积物物理性质研究   总被引:6,自引:0,他引:6  
用物理(声学的、工程地质的、扫描电子显微镜)等技术方法,综合分析了沉积物结构特征和工程力学性质,研究了颗粒接触、堆垒、孔隙等现象与物理性质之间的关系,得出了沉积物声学物理参数和应力一应变性质之间的关系。结果表明,南海北部大陆架海底沉积物有6种结构类型,其中混合接触结构类型的沉积物具有较高的抗压强度和声速,浅层海底存在着高、低声速分层的中尺度结构。  相似文献   

14.
分析研究了南海北部大陆架西南缘的海南岛东南外海海底沉积物声学物理特性,在多个航次中进行了海底沉积层取样、海水CTD测量、浅地层及旁侧声呐扫测等工作.在实验室里对沉积物样品进行声学参数、沉积学基本参数、物理力学参数和14C年龄测试等分析.根据多尔特曼公式求解出弹性模量、体积弹性模量、压缩系数、切变模量、泊松比和拉梅常数等六项沉积物弹性参数.分析结果表明在该海区海底沉积物的压缩波速为1.474~1.700 m/s,在不同的海区内有高低声速两类性质的沉积物分布;沉积物的切变波速为150~600 m/s;沉积物在100 kHz的声衰减为35~260 dB/m;沉积物的密度为1.4~2.0 g/cm3;沉积物的孔隙度为42%~88%.  相似文献   

15.
砂土是主要的海底沉积物类型之一,明确砂质沉积物声学与物理性质的关系对海底底质和地层探测至关重要。本文利用超声探测仪和自制的试样制备测试装置,模拟制备不同沉积状态的砂土试样,同步开展超声测试和物理性质测试,探讨砂质沉积物声速测试方法及影响因素,揭示砂质沉积物压缩波速与物理参数的内在联系。试验结果和分析表明:换能器接触管壁的间接测量方法中,声波多路径传播可显著影响沉积物声速测量的准确性,而换能器接触试样的直接测量方法可避免这一影响;30 kHz至100 kHz的不同频率对压缩波速测量结果没有明显影响。砂质沉积物的压缩波速与密度、孔隙度、含水率有较好的相关性,相关系数分别为0.87、0.86、0.84,并且随密度的增大而增大,随孔隙度、含水量的增大而减小。砂质沉积物的压缩波速与中值粒径的相关系数小于0.6,对物质组成不敏感。另外,与声速相比,砂质沉积物的声阻抗与密度、孔隙度、含水量的相关性更高。砂质沉积物压缩波速对饱和度非常敏感,例如,饱和度从0.971增至0.994时,压缩波速从393.3 m·s-1急剧增大到748.5 m·s-1,需特别注意。  相似文献   

16.
原位测量技术在黄海沉积声学调查中的应用   总被引:11,自引:3,他引:8  
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。  相似文献   

17.
研究海底表层沉积物性质对海洋矿产资源探测、海洋工程建设等有重要的意义。Biot-Stoll模型可以模拟预测海底沉积物的物理性质,但采用不同的参数模拟的效果不同。Stoll参数是各种海洋环境下模型达到最佳预测的单一数值的形式;Schock参数则是对渗透率、孔隙大小、沉积物孔隙曲折度等修改后的函数表达式形式,更接近沉积物实际情况。采用Stoll参数和Schock参数分别计算了南海南部海区海底沉积物纵波速度,并对南海南部沉积物样品进行了计算和实测对比,结果表明,采用Stoll参数计算误差较大,平均为3.962%;采用Schock参数计算误差较小,平均为0.847%。因此,在南海南部海区采用Schock参数预测海底表层沉积物物理性质更准确。  相似文献   

18.
Statistical analysis of laboratory-measured compressional wave (sound) velocity, porosity, wet bulk density, and selected textural parameters of surface sediments from the Barents Sea reveals that clay content and mean grain size are the best indices to sound velocity. These parameters are followed closely by porosity and wet bulk density, while sand content provides the weakest index. Although Barents Sea surface sediments are characterized by fairly high variability, the results of the present study are in general agreement with studies of similar sediment types in other continental shelf environments.  相似文献   

19.
To accurately characterize sound speed dispersion of shallow sediments in the Southern Yellow Sea, three types of sediments, i.e., silt, clayey silt, and silty clay, were selected to measure the sound speeds at 25–250?kHz. Over the frequency range, the sound speeds vary approximately from 1,536 to 1,565?m?s?1 in silt sediment, from 1,511 to 1,527?m?s?1 in clayey silt sediment, and from 1,456 to 1,466?m?s?1 in silty clay sediment. The sound speed exhibits a slow increase with frequency in a nearly linear gradient, but these three types of sediments have different sound speed dispersion characteristics. The silt sediment with relatively coarse grains has the most significant sound speed dispersion, while the sound speed dispersions of the two others are relatively weak. Comparison between the measured dispersions and the model predictions shows that the grain-shearing model can match the measured data at most of frequencies. Nevertheless, when the grain bulk modulus was assigned 3.2?×?1010?Pa according to relevant references, the Biot–Stoll model predictions were higher than the measured values at high frequencies; when it was assigned a relatively small value of 2.8?×?1010?Pa, the model predictions achieved optimal matching with the measured values.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号