共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
渤海海上溢油漂移扩散数值模拟研究 总被引：4，自引：0，他引：4
近几年渤海海上溢油突发事件频发,对海洋环境造成严重的污染。本文将业务化气象数值模型(Weather Research and Forecast model,WRF)、海流数值模型(Regional Ocean Model System,ROMS)的数值预报结果作为海洋环境驱动场,采用"油粒子"的海上溢油漂移扩散数值模拟方法,对在渤海发生的溢油扩散行为进行模拟预测。本文针对渤海溢油事件,设计敏感试验,研究不同风、流系数和网格分辨率对溢油扩散模拟结果的影响,获得适合于渤海的溢油数值模型参数,提高溢油漂移扩散预报的准确度,为海洋溢油应急处置和防灾减灾提供技术支持。 相似文献
3.
溢油事故会对海洋、湿地和河口的生物造成严重危害。为了降低石油泄漏事故的危害,促进清理工作的顺利进行,需要了解油膜的运动路径和扩散范围,结合流、风等信息对油污的漂移进行预测。本文主要工作是利用NOAA的GNOME(General NOAA Operational Modeling Environment)溢油模型,对墨西哥湾"深海地平线"溢油事故在2010年5月8日~11日的溢油情况进行了溢油轨迹的模拟。模拟过程中,采用GOM HYCOM模式计算的流场数据和NECP的CFSR(Climate Forecast System Reanalysis)风场数据作为GNOME模型的驱动数据。并将模拟结果与卫星观测资料进行了对比验证,结果表明GNOME模拟的溢油轨迹与卫星应急信息中心网站(Center for Satellite Based Crisis Information)提供的油污覆盖卫星图相符性良好。并研究了流场的不确定性对溢油轨迹模拟结果的影响。 相似文献
4.
蓬莱19-3 油田事故溢油数值模拟 总被引：2，自引：0，他引：2
利用FVCOM(Finite-volume coastal ocean numerical model)数值模型和MM5风场预报模式,在对渤海海域水动力场进行数值模拟的基础上,基于"油粒子"的欧拉-拉格朗日跟踪法和随机走动原理,并考虑风对溢油油膜漂移扩散的直接作用,建立了海洋溢油油膜漂移轨迹和扩散的数值预测模型。利用建立的模型对2011年6月蓬莱19-3油田事故溢油进行了数值模拟,模拟结果与RADARSAT卫星遥感监测数据相吻合。研究结果表明:在渤海中部地区夏季事故溢油模拟预测中,风漂移因子取0.024最为合理,模型可用于渤海蓬莱19-3油田附近事故溢油轨迹和扩散的快速预报,从而为该区域的溢油事故应急响应提供科学依据。 相似文献
5.
海上溢油油膜厚度实验室模拟和理论模型对比研究 总被引：1，自引：0，他引：1
溢油量是衡量溢油规模的关键指标,是处理溢油事故的重要依据。油膜厚度是确定溢油量的基本前提,是一个尚未解决的国际难题。实验室中模拟了不同阶段和不同环境条件下扩展油膜的厚度变化特征。结果表明,实验室模拟与理论模型分析具有基本一致的变化趋势,扩展速度与扩展时间成反比;温度是影响油膜厚度的重要因素,相同条件下,温度越高,油膜厚度越小;海水盐度会影响溢油扩展,但这种影响并未延伸到对油膜厚度的控制上。由于实验室模拟限定在平静海面条件下,并未考虑风和海流等扩展中不容忽视的因素,故与理论构建模型相比系数相差较大。通过对比分析,前期构建的理论模型更能准确地反映海洋溢油的实际情况,加之在实例验证中的较高准确性,该模型具有业务化实施和广泛推广的潜力。 相似文献
6.
水下溢油数值模拟研究 总被引：1，自引：0，他引：1
基于Lagrange积分法和Lagrange粒子追踪法建立了一个水下溢油数值模型。该溢油模型由两个子模型组成:羽流动力模型和对流扩散模型,其中羽流动力模型用以模拟溢油的喷发阶段和浮力羽流阶段;对流扩散模型用以模拟溢油的对流扩散阶段。通过数值实验,结合实验室水槽实验和水下溢油现场实验的观测资料进行模型验证。实验结果表明,模拟结果与观测资料一致性较好,从而验证了本文溢油模型的合理性和准确性;羽流动力模型为对流扩散模型提供源,海流、海水的垂向密度结构和油滴的直径分布是影响溢油在对流扩散阶段运动和分布的主要因素。 相似文献
7.
8.
9.
文章以４种溢油分散剂为研究对象,以１０ｍｉｎ乳化率为观察指标,在实验室条件下依据国家标准,评价了４ 种溢油分散剂的乳化性能,以及温度、盐度、剂油比等环境因素对乳化稳定性能的影响。结果表明,温度显著影响４种溢油分散剂的稳定性能;盐度对４种溢油分散剂稳定性能的影响较小;不同比例的溢油分散剂加入对溢油分散剂稳定性能的影响变化较大。与溢油事故现场相关的实验研究还需要进一步开展。 相似文献
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Coastal inundation associated with extreme sea levels is the main factor which leads to the loss of life and property whenever a severe tropical cyclonic storm hits the Indian coasts. The Andhra and Orissa coasts are most vulnerable for coastal inundation due to extreme rise in sea levels associated with tropical cyclones. Loss of life may be minimized if extreme sea levels and associated coastal flooding is predicted well in advance. Keeping this in view, location specific coastal inundation models are developed and applied for the Andhra and Orissa coasts of India. Several numerical experiments are carried out using the data of past severe cyclones that struck these regions. The simulated inland inundation distances are found to be in general agreement with the reported flooding. 相似文献
13.
This study tests the hypothesis that the in situ void ratio of surficial marine sediments may be predicted from shear wave velocity-depth data with a reliability equal to that of other methods currently available. Shear wave velocity is fundamentally controlled by the number of grain-to-grain contacts per unit volume of material and by the effective stress across those contacts. In this study, three previously established empirical formulae are used to predict void ratio from velocity-depth data. Field data were acquired along a transect off the northern Californian coast across which water depth increased from 35 to 70 m and seafloor sediment type varied from sand to silty-sand, respectively. A towed seafloor sled device was used to collect shear wave refraction data, and a marked, systematic decrease in velocity was observed along the line, ranging from 35-70 m/s for the coarse, near-shore material to 25-40 m/s for the finer, offshore deposits. Void ratios predicted from these velocities were compared with data measured directly from box-core samples. Of the formulae used for prediction, two agree remarkably well with the control data. Both predicted and control values increase from 0.6-0.8 for the sandy material to 1.1-1.5 for the silty-sand. Thus, this study does not disprove the hypothesis set and demonstrates the potential of field shear wave velocity-depth data as a means of delineating spatial variation in void ratio for surficial marine sediments in a remote, nondestructive manner. 相似文献
14.
Hoi-Soo Jung Kap-Sik Jeong Yong-Shik Chu Sung-Hyun Park Ki-Hyune Kim 《Marine Georesources & Geotechnology》2001,19(3):181-195
Grain size and water content in box-core sediments from the Clarion-Clipperton fracture zone (C-C zone) in the northeast equatorial Pacific were analyzed in detail to understand the downcore variations across a hiatus between Quaternary and Tertiary layers. Grain-size distributions in the topmost core sediments show two modes: a coarse mode (peaked at 50 μm) and a fine mode (at 2-25 μm). The coarse mode disappears gradually with depth accompanied by the dissolution of siliceous fossil tests, whereas the fine mode coarsens due to the formation of authigenic minerals. Water content increases abruptly across a color boundary between an upper pale brown layer and a lower dark brown layer that is the hiatus between Quaternary and Tertiary layers. Abundant smectites and microvoid molds, which are created by the prolonged fossil dissolution in the underlying sediment, are attributed for the abrupt downcore variation of water content. Overall variations in grain size and water content in the topmost core sediments in the western C-C zone are possibly constrained by the dissolution of biogenic siliceous fossils. Variations in geotechnical properties related to these changes must be considered in the design of nodule collectors. 相似文献
15.
Shigehisa Nakamura 《Marine Geodesy》2001,24(1):27-33
This article concerns an interrelation between the sea levels and the western boundary flow near a tectonic boundary in a local zone in the Northwestern Pacific. In this zone, sea level variations at stations located on the coast facing the Pacific are studied to find the interrelation between variations of the Kurosio flow as an index of the distance of the flow axis off a specific coast. The result is discussed after data processing of the monthly means of the sea levels, and a notice is taken of variations caused by active crustal upheavals during a seismic event, a local earthquake. 相似文献
16.
Particulate samples were collected from the Changjiang river system during a flood period, in May 1997, and POC, stable isotope and lipids associated with particles were examined. Results showed the decrease (0.84% ～ 1.88%) of organic carbon content from the upper reaches to the estuary.δ13C values of particulate organic carbon was in the range of -24.9×10-3 to -26.6×10-3, which were close to the isotopic signature of continental C3 vegetation. Total particulate n-alkanes concentrations varied from 1.4 to 10.1μg/dm3,or from 23.7 to 107μg/g of total suspended matter. Fatty acids were present in all the samples, from 1.4 to 5.4μg/dm3, with saturated and unsaturated straight-chain and branched compounds in the carbon number range from C12 to C30. Both δ13C and the ratio of carbon content to nitrogen content indicate the predominance of terrestrial inputs (soil organic matter) among the particles. The biomarker approach has been used to identify the relative portion of terrigenous and autochthonous fraction in the particulate samples. The distribution of fatty acids suggests a striking phytoplanktonic and microbial signal in most particle samples. The terrestrial alkanes are used to estimate the contribution of terrestrial inputs along the mainstream. 相似文献
17.
Andrzej Chybicki 《Marine Geodesy》2018,41(1):1-23
Current trends of development of satellite derived bathymetry (SDB) models rely on applying calibration techniques including analytical approaches, neuro-fuzzy systems, regression optimization and others. In most of the cases, the SDB models are calibrated and verified for test sites, that provide favorable conditions for the remote derivation of bathymetry such as high water clarity, homogenous bottom type, low amount of sediment in the water and other factors. In this paper, a novel 3-dimensional geographical weighted regression (3GWR) SDB technique is presented, it binds together methods already presented in other studies, the geographically weighted local regression (GWR) model, with depth dependent inverse optimization. The proposed SDB model was calibrated and verified on a relatively difficult test site of the South Baltic near-shore areas with the use of multispectral observations acquired by a recently launched Sentinel-2 satellite observation system. By conducted experiments, it was shown that the proposed SDB model is capable of obtaining satisfactory results of RMSE ranging from 0.88 to 1.23[m] depending on the observation and can derive bathymetry for depths up to 12m. It was also shown, that the proposed approach may be used operationally, for instance, in the continuous assessment of temporal bathymetry changes, for areas important in the context of ensuring local maritime safety. 相似文献
18.
N. H. Khadge 《Marine Georesources & Geotechnology》2000,18(3):251-258
As a part of the environmental impact assessment studies, geotechnical properties of sediments were determined in the Central Indian Basin. The undrained shear strength and index properties of the siliceous sediments were determined on 20 box cores of uniform dimension collected from various locations in five preselected sites. The maximum core length encountered was 41 cm and most of the sediments were siliceous oozes consisting of radiolarian or diatomaceous tests. The shear strength measurements revealed that surface sediments deposited in recent times (0-10 cm) have a shear strength of 0-1 kPa; this value increases with depth, reaching 10 kPa at 40 cm deep. Older sediments have greater strength because of compaction. Water content varies in the wide range of 312-577% and decreases with depth. The clay minerals such as smectite and illite are dominant and show some control over water content. Wet density, specific gravity, and porosity do not indicate any notable variation with depth, thereby indicating a uniform, slow rate of sedimentation. The average porosity of sediments is 90.2%, specific gravity 2.18, and wet bulk density 1.12 g/cm 3 . Sediments exhibit medium to high plasticity characteristics, with the average plasticity index varying between 105% and 136%. Preliminary studies on postdisturbance samples showed an increase in natural water content and a decrease in undrained shear strength of sediments in the top 10- to 15-cm layer. 相似文献
19.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
20.
An Improved Calibration of Satellite Altimetric Heights Using Tide Gauge Sea Levels with Adjustment for Land Motion 总被引：2，自引：0，他引：2
Gary T. Mitchum 《Marine Geodesy》2000,23(3):145-166
Several major improvements to an existing method for calibrating satellite altimeters using tide gauge data are described. The calibration is in the sense of monitoring and correcting temporal drift in the altimetric time series, which is essential in efforts to use the altimetric data for especially demanding applications. Examples include the determination of the rate of change of global mean sea level and the study of the relatively subtle, but climatically important, decadal variations in basin scale sea levels. The improvements are to the method described by Mitchum (1998a), and the modifications are of two basic types. First, since the method depends on the cancellation of true ocean signals by differencing the altimetric data from the tide gauge sea level time series, improvements are made that produce a more complete removal of the ocean signals that comprise the noise for the altimetric drift estimation problem. Second, a major error source in the tide gauge data, namely land motion, is explicitly addressed and corrections are developed that incorporate space-based geodetic data (continuous GPS and DORIS measurements). The long-term solution, having such geodetic measurements available at all the tide gauges, is not yet a reality, so an interim solution is developed. The improved method is applied to the TOPEX altimetric data. The Side A data (August 1992?February 1999) are found to have a linear drift component of 0.55 + / 0.39 mm/yr, but there is also a significant quadratic component to the drift that is presently unexplained. The TOPEX Side B altimeter is estimated to be biased by 7.0 + / 0.7 mm relative to the Side A altimeter based on an analysis of the first 350 days of Side B data. 相似文献