首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
遥感技术在河口颗粒态总磷分布及扩散研究中的应用初探   总被引:4,自引:0,他引:4  
以美国SeaStar卫星装载的SeaWiFS海洋水色遥感传感器作为遥感数据源,实测了光谱、海表温度、悬浮物含量、透明度、叶绿素浓度、颗粒态总磷含量等,建立了传感器悬浮物含量和颗粒态总磷含量的遥感信息提取模式,结果表明:(1)利用遥感技术估算的海水悬浮物的平均相对偏差为18.1%;(2)悬浮物在遥感图象上的分布和扩散趋势与实际吻合,并且在一定程度上反映了区域内海流运移路径;(3)颗粒态总磷含量在长江河口和杭州湾附近海域较高,由近岸向远岸迅速降低,与实际分布相符;(4)模型主要适用于河口等悬浮物含量高的Ⅱ类水休,对于以浮游植物为主的Ⅰ类水体应另外建立模式.  相似文献   

2.
1998年冬季台湾海峡遥测叶绿素分布特征   总被引:13,自引:1,他引:12  
结合1998年2-3月台湾少峡的SeaWiFS水色数据与现场观测Chla数据,对遥测与实测数据进行了初步的对照分析,同时比较了遥测与实测叶绿素的分布状况,以期利用丰富的水色遥感信息掌握海域时绿素的时空变化,进而进行海域初级生产力的研究,分析结果表明,SeaWiFS水以民现场实测数据的相关性良好(r^2=0.81,n=7),初步说明,SeaWiFS水色数据能够在相当程度上反映海域的实际Chla含量,另一方面,遥测沿岸水对营养盐的输送,贫瘠的黑潮水自海峡南部的入侵是造成一分布况的主要原因,黑潮水经由澎湖水道进入海峡的现象在SeaViFS图像的得到佐证。  相似文献   

3.
利用SeaDAS从SeaWiFS卫星数据反演中国东海叶绿素浓度   总被引:1,自引:0,他引:1  
卫星海洋遥感反演海中叶绿素浓度,对海洋初级生产力估算及赤潮预报均有重要意义.本文介绍了SeaWiFS卫星传感器业务化算法OC4,利用SeaDAS软件反演中国东海叶绿素浓度,并与东海同步现场数据进行验证.结果表明:利用SeaDAS方法计算的东海叶绿素含量与实测含量之间具有较好的相关性,但总体上计算值要高于实际测量值;东海叶绿素含量具有分带性,河口、近岸海域高,中陆架次之,外陆架最低,这种发育特点与该海域的陆源营养盐输入、海洋动力系统有着显著的关系.  相似文献   

4.
人工神经网络反演珠江口海域叶绿素浓度   总被引:12,自引:0,他引:12  
利用2003年1月、2004年1月在珠江口海域的叶绿素浓度和辐射同步实测资料,建立了反演珠江口海域叶绿素浓度的人工神经网络模型。应用该模型由SeaWiFS资料获取珠江口海域叶绿素浓度分布图,并与SeaBAM推荐的OC2和OC4这2种统计算法的反演结果进行比较,结果表明人工神经网络模型的反演效果明显优于统计算法。人工神经网络模型的均方根差是0.2899,可决系数是0.8848;而统计算法的均方根差大于0.5,可决系数小于0.6。  相似文献   

5.
基于控制因子分析的方法,本研究建立了夏季珠江口海域海水CO2分压(pCO2)的遥感反演模型。基于珠江水与黑潮水的两端元混合,建立了水平混合和热力学作用的量化模型,并生成了查找表。同时,建立了基于黄色物质(含碎屑)吸收系数的盐度遥感算法,实现珠江口海域表层盐度的遥感反演。利用走航pCO2和匹配的遥感叶绿素质量浓度产品,建立了生物作用的量化模型。通过集成水平混合和生物作用,最终实现夏季珠江口海域pCO2的遥感反演。与走航pCO2比较表明,仅考虑水平混合和热力学作用的遥感结果会显著高估,考虑生物作用后,遥感结果无论在量值和空间变化趋势上均与实测结果相符。此外,遥感反演结果表明,夏季珠江口近岸水域为CO2的汇区,而离岸的陆架水域则为CO2的弱源。  相似文献   

6.
海洋叶绿素a质量浓度遥感产品是海洋初级生产力与海洋生态系统固碳能力研究的重要数据源,为了保证数据的可靠性,对遥感产品进行精度验证以及验证误差的成因分析尤为重要。遥感产品的验证过程中,由于空间变异的存在,使得遥感像元尺度内的实测数据具有不同的离散程度和统计分布特征,并由此产生了不同的误差统计结果。本文选择MODIS-Aqua、MODIS-Terra、MERIS、SeaWiFS等卫星传感器叶绿素a质量浓度遥感产品为研究对象,统计分析了数据产品的空间变异与验证精度的关系。结果表明:空间变异是造成验证误差的直接原因之一,平均绝对百分比误差(Mean Absolute Percentage Error:MAPE)与空间变异系数(Coefficient of Variation: CV)呈幂指数模型关系;当CV<0.05时,MAPECV的增加明显;当CV>0.15时,MAPE的变化趋于平缓。不同卫星传感器叶绿素a质量浓度产品验证结果表明,SeaWiFS精度最高,MERIS次之,MODIS-Terra精度最低。  相似文献   

7.
为进行海洋表层风场的物理结构重建与基础理论溯源,需选用可靠准确且通过检验的高时空分辨率风场资料。本文利用NDBC、TAO和嵊泗站现场观测资料,在全面比较分析的基础上,对其中应用较广泛的CFSR/CFSv2、ERA-Interim、FNL和CCMP四种风场产品在北半球海域(北太平洋、北大西洋)进行了检验评估,得出结论:1)4种资料的风速都不同程度地低估了实际观测风速;在低风速区的风向偏差较大,风速越低,偏差越多;产品资料在远岸地区比近岸地区更接近实测资料,在高纬地区的效果优于低纬地区。2)通过比较4种产品资料与浮标实测资料的风向和风速的偏差、均方根误差、误差标准差和相关系数,发现CCMP资料是4种资料中整体效果最好的一种,而CFSR/CFSv2资料是较差的一种。3)嵊泗站观测平台资料与浮标观测资料验证的结论略有差异,结果显示:FNL资料是4种资料产品中效果最好的产品,ERA-Interim资料的效果仅次于FNL,而用浮标验证效果较好的CCMP资料在嵊泗站点效果却较差,CFSR/CFSv2资料是4种资料中效果最差的。4)通过分析4种风场资料的偏差分布发现,CCMP与ERA-Interim风场资料的偏差较小,而CFSR/CFSv2与FNL风场资料的偏差较小。CCMP资料与其他3种资料的纬向风偏差在海洋上以负偏差为主,陆地以及沿岸地区的偏差较大,且分布不均匀;经向风偏差分布中,南半球的正偏差区较为明显,而北半球的负偏差区则较为明显,但偏差程度要小于纬向风偏差。  相似文献   

8.
通过2017年5月闽浙沿岸附近海域航次的温度、盐度和溶解态稀土元素(Rare Earth Elements,REEs)的实测数据,对该海域溶解态REEs的分布、配分模式以及主要影响原因进行了分析。结果表明:研究区域,盐度随着采样站位离岸距离的增加而增大。溶解态REEs则呈现近岸高而远岸低的分布特点。造成这种分布状况的原因:一是近岸陆源河流的输入导致近岸盐度低,REEs浓度高;二是受到高温高盐水(台湾暖流水和黑潮次表层水)的入侵,造成远岸盐度高而溶解态REEs元素浓度低。不同站位的溶解态REEs的配分模式有明显区别。近岸低盐站位由北向南,重稀土元素富集程度逐渐增大,反映了陆源不同河流的输入。通过溶解态REEs的配分模式发现,远岸高盐站位会受到台湾暖流和黑潮次表层水的共同影响。  相似文献   

9.
福建海岛潮间带底栖生物群落生态的研究   总被引:11,自引:0,他引:11  
对福建海岛潮间带大型底栖生物共鉴定862种,其中动物为734种,藻类为128种。对11个主要海鸟的潮间带生物群落测定Jaccard群落系数,应用加权均值联结法聚类分析及极坐标排序分析,海岛潮间带生物群落可分为3个类型:(1)开敞海域群落,宏观上分布于地处远岸水域的海岛或近岸凸出部、开阔部水域的海岛;(2)近岸港湾群落,分布于近岸或港湾的海岛;(3)河口群落,分布于河口区的海岛。群落种类组成和海岛所在地理集团及其生境密切相关。盐度水扰动程度是影响群落分 布的主要因子。  相似文献   

10.
为利用遥感技术快速、及时的掌握厦门近岸海域水体中悬浮颗粒物的总体分布情况,现场测量了厦门海域水体的下行入射辐射、天空光以及经过水气界面后反射回的辐射,计算了该海域水体表面的离水辐射获得了水体表面以上遥感反射率;同时采集了与光谱信息同步的水体样品,并分析了水体中的悬浮颗粒物质量浓度,获取了对应站位的水体反射波谱曲线和采集样品的浓度数据.通过研究不同站位水体的反射光谱数据,依据GF-WFV波段设置,对现场实测的光谱数据进行了拟合,并创建了基于GF-WFV拟合波段的悬浮颗粒物浓度经验反演算法.通过研究发现拟合(Rrs3+Rrs4)/Rrs2(其中Rrs1、Rrs2、Rrs3、Rrs4分别是GF-WFV第1、2、3、4波段的遥感反射率)同实测水体悬浮颗粒物质量浓度之间的决定系数为0.655,依据研究得出的反演算法反演该海域水体悬浮颗粒物质量浓度,其均方根误差为11.03 mg/dm3,相对误差为8.40 mg/dm3.利用同步的GF-WFV遥感数据对厦门近岸水体中总悬浮颗粒物质量浓度进行了研究,获取了研究区水体悬浮颗粒物的空间分布情况,结果表明GF-WFV遥感数据能很好的反映厦门近岸水体悬浮颗粒物浓度分布状况.  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

13.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

14.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

15.
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.  相似文献   

16.
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.  相似文献   

17.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

18.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.  相似文献   

19.
20.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号