首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
海上自升式钻井平台完成预定工作后,将收起桩靴迁航到下一个目的地,桩靴的拔出是由支撑状态向漂浮状态过渡的重要过程,是自升式钻井平台正常作业不可缺少的重要组成部分。在这个过程中,拔桩阻力的预测对于桩靴上拔安全至关重要。笔者通过对平台拔桩阻力进行分析,并结合中油海平台近几年的拔桩作业经验,提出了施工中的注意事项,具有一定的指导意义。  相似文献   

2.
自升式作业平台是勘探开采海洋油气资源的重要装备。在其使用期内,需要多次移动位置。移动之前,自升式平台通过桩腿拔出桩靴。拔桩过程可能因地质条件复杂而费时费力。喷冲系统对降低拔桩阻力的功效明显。通过单喷嘴试验,本文研究不同地质条件下的喷冲参数变化规律,并探讨参数之间的相互影响。通过桩靴模型喷冲试验,验证喷冲系统降低拔桩阻力的有效性。试验结果将为进一步设计能够有效降低自升式平台拔桩阻力的喷冲系统提供技术支持。  相似文献   

3.
自升自航式船桩靴入泥初步分析   总被引:2,自引:0,他引:2  
龚闽  谭家华 《海洋工程》2005,23(2):87-91
初步分析自升自航式船桩靴的入泥过程、入泥机理和入泥深度的组成,讨论桩靴入泥深度的计算分析方法,将入泥过程看作基础埋深增大的过程,用极限承载力公式分析计算桩靴的入泥深度和适宜的地基。  相似文献   

4.
自升式钻井平台在海洋石油开采中得到了广泛的应用。桩腿的刺穿安全性分析是钻井平台插桩分析的重点。随着钻井平台建造越来越大,压载过程中,桩靴对土层的破坏模式也发生了改变,一种新的土层破坏模式(土塞破坏模式)在大直径桩靴压载过程中经常发生。分析了在复杂地层下,常规破坏模式和土塞破坏模式发生的机理,并对土塞破坏模式下计算桩靴入泥深度的基本公式进行了介绍。根据多次工程实践以及案例分析表明,土塞破坏分析模式能够较为准确地预测大型钻井平台在复杂地层下的桩靴入泥深度,为钻井平台操作者提供可靠的资料和安全分析。  相似文献   

5.
在海洋工程中,移动钻井平台在作业结束后需要转场时,经常会遇到拔桩困难的问题,桩靴底部的吸附力是上拔力的重要组成部分,明确其产生机理及发展规律对于上拔力计算与缓解上拔困难问题有重要意义。通过室内模型试验研究了黏土中桩靴底部真空度对桩靴吸附力产生机理的影响,试验结果表明,桩靴底部真空度的变化对上拔力的影响显著,而桩靴贯入深度和上拔速率会对真空度产生影响。当真空度达到峰值时,桩靴底部吸附力与上拔力几乎同时达到峰值,因此可以通过减小桩靴底部真空度的措施来减小上拔力。根据试验结果,提出了运用真空吸盘理论来计算桩靴底部吸附力的计算公式。所述吸附力计算方法与试验结果进行对比,其误差较小,对工程实践具有一定的参考意义。  相似文献   

6.
海上自升式钻井平台以其造价低廉、便于移动和安装的优势被广泛应用于海洋地质勘察、风电安装和油气开采等领域,其基础类型多为桩靴基础。为了保证平台能在恶劣的海洋环境中安全作业,桩靴基础需要贯入海床以下一定深度以获得足够的承载力。然而,当桩靴基础在上硬下软土层中贯入时可能发生穿刺破坏导致平台损坏甚至倾覆。已有的桩靴穿刺破坏分析方法基于预设的地层参数预测穿刺荷载,由于无法考虑海床中地层及土性的不确定性,其准确性有待提高。将桩靴基础贯入过程中的监测数据与穿刺破坏机理相结合,通过66组离心机模型试验结果表征土体不确定性的影响,发展贝叶斯预测模型,实现了峰值阻力和穿刺深度的实时预测。基于规范推荐的荷载扩展分析法和冲剪系数分析法,建立了适用于规范法的概率模型,采用该模型对上砂下黏土层中桩靴基础的穿刺行为进行了预测,结果表明所提方法的预测精度随着监测数据的增加而提高,预测得到的峰值阻力误差在10%以内。  相似文献   

7.
开发了一种新型平台桩靴,可通过活动板转动实现自升式平台不同阶段桩靴受力面积的灵活变化。基于大变形有限元方法,模拟新型桩靴基础在“砂-黏”地层中的贯入过程,分析了活动板转角、砂层厚度比、摩擦角和黏土层不排水抗剪强度对新型桩靴贯入阻力的影响,并与普通桩靴的贯入响应比较。数值分析中,上覆砂土和下层黏土分别采用摩尔库伦模型和修正Tresca模型进行模拟。结果表明:新型桩靴穿刺时,土层参数对峰值阻力的影响规律与普通桩靴相同,但其峰值阻力随活动板转角的变化而变化,无法直接使用具有等效面积普通桩靴的穿刺预测方法。考虑各项关键影响因素,结合穿刺破坏时的地基破坏模式,基于数值模拟结果提出了适用于新型桩靴的贯入阻力预测公式。  相似文献   

8.
陈洋彬  郑敬宾  王栋 《海洋工程》2021,39(1):112-120,170
自升式平台作业前需对桩靴基础进行预压安装,使桩靴具备抵抗竖向-水平-弯矩复合荷载的能力。安装过程中,桩靴上部将形成一定深度的孔洞。弱超固结黏土地基中,土体强度较高,桩靴最终贯入深度较浅,而形成的上部孔洞较深,因此孔洞将对桩靴就位后的承载力产生影响。通过有限元分析,研究弱超固结黏土中桩靴上部孔洞对承载力的影响,结果表明:1)与无孔洞的情况相比,孔洞的存在对桩靴的单向和复合承载力有削弱作用; 2)当桩靴与孔洞底部距离大于桩靴直径时,承载力不再受上部孔洞的影响; 3)当桩靴埋深小于等于0.75倍桩靴直径时,无论桩靴上部有无孔洞,现有预测公式都不能较为合理地预测弱超固结黏土地基的复合承载力,为此提出了考虑孔洞影响的桩靴复合承载力包络面预测公式。  相似文献   

9.
在分析桩靴式钻井平台插桩过程中地基土的破坏形式的基础上,将桩靴下土体破坏面假定为锥形面,根据极限平衡理论,推导出了均匀、双层地基土中基于被动土压力的插桩阻力计算公式。通过插桩实例对所推导的公式进行了验证,分析比较了极限承载力与插桩阻力的异同,讨论了插桩阻力计算公式推导过程中土体假设为锥形破坏面的合理性,认为本文推导的插桩阻力计算公式作为桩靴式钻井平台插桩深度预测方法更接近实际插桩结果。  相似文献   

10.
在自升式平台的预压载过程中,桩靴在层状地基上较易发生“穿刺”现象,很大程度上影响着平台的安全运行。准确地分析桩靴峰值阻力,避免平台桩靴发生“穿刺”是非常重要的。采用极限分析上限定理,合理构建运动许可速度场,从理论上推导了层状地基上桩靴峰值阻力的上限解答。为了进一步验证峰值阻力理论解答的准确性,采用ABAQUS有限元软件构建了“桩靴—弹塑性海床”的三维数值模型,对桩靴贯入海床的过程进行了数值模拟,分析桩靴周围土体的塑性变形演变规律,研究土体的破坏机理。研究结果表明:推导的桩靴峰值阻力上限解答,能够较好地计算层状地基极限承载能力,通过与离心机试验和数值结果对比,计算误差在18%以内;给出的运动许可速度场能够较好地反映桩靴周围土体破坏模式;桩靴阻力达到峰值时,下层软土中的土塞高度约为桩靴直径的0.2倍。  相似文献   

11.
Evaluation of long-term extreme response statistics of jack-up platforms   总被引:1,自引:0,他引:1  
This paper is concerned with the models appropriate for the dynamic assessment of jack-ups, concentrating particularly on the long-term response due to random ocean waves and on work-hardening plasticity models used for spud-can response. A methodology for scaling of short-term statistics, calculated using a Constrained NewWave technique, is shown in a numerical experiment for an example jack-up and central North Sea location. The difference in long-term extreme response statistics due to various footing assumptions is emphasised. Results for two environmental load conditions are described (one excluding and one including wind and current effects) and the role of sea-state severity in the variation of short-term extreme response statistics is also highlighted.  相似文献   

12.
佘稳  蒋宝凡  刘剑涛 《海洋工程》2021,39(3):148-155
自升式钻井平台插桩深度分析要求高,难度大,可检验性非常强。常规计算模式主要为“穿刺破坏模式”和“排挤破坏模式”。对于某些地质条件复杂的井场,按这两种模式分析计算的结果仍存在个别预测不准的情况。因此,如何提高钻井平台插桩分析的准确性,是目前需要攻克的一个技术难点。在总结工程插桩实践经验的基础上,提出了一种新的分析模式,即“混合破坏模式”。以南海一个工程实例进行具体分析,该井场应用“混合破坏模式”分析的插桩结果与实际结果较为吻合。并对数个复杂井场的实际插桩结果进行了统计分析,总结了桩端土体破坏模式的影响因素及“混合破坏模式”的特点,为在复杂地层中进行插桩分析提供了参考。  相似文献   

13.
The jack-up unit may suffer difficult extraction from soft clay attributed to the large embedment and suction. To ease spudcan extraction, the jetting technique is extensively adopted. The jetting effect on spudcan extraction is investigated with a series of model tests. Firstly, the effectiveness of top jetting is investigated, and it is found that the top jetting is not effective in reducing extraction resistance. Secondly, the efficiency of different jetting procedures are studied. It is revealed that jetting prior to extraction reduces the suction by increasing the excess pore pressure at spudcan base. And the jetting after extraction begins reduces the suction by filling the gap formed under the spudcan with jetting water and eliminating cavitation. Finally, tests with different jetting times, jetting rates, jetting pressures, and jetting nozzle locations and numbers are conducted. It is found that the effect of jetting time converges as it increases. The flow rate of jetting prior to extraction has little effect on jetting efficiency, whereas the flow rate of jetting after the extraction begins has significant influences on the jetting efficiency. Jetting pressure also has great effect on jetting efficiency, and converges as it increases. The closer the nozzles are located to the spudcan edge, the sooner the post-peak extraction resistance decreases. And the jetting efficiency increases with the nozzle number. The findings from the experimental studies can serve as a reference for future studies on the operation and optimization design of a jack-up jetting system.  相似文献   

14.
自升式平台桩脚在含硬壳层地基中的插深分析   总被引:1,自引:0,他引:1  
存在硬壳层的层状地基承载能力分析是自升式钻井平台桩脚插深分析的关键,但是目前对硬壳层承载能力的确定还没有成熟可行的理论计算方法。一般的针对非均质层状地基的承载力计算方法,因参数较多,计算步骤繁琐,很难广泛应用于实际的平台桩脚入泥深度分析中。文中主要介绍了存在硬壳层的层状地基承载力的分析方法与过程,根据应力扩散原理推导并做适当的简化得到硬壳层承载力修正方法。简化后的修正方法能满足一般硬壳层承载力分析的需要,并使平台插桩深度分析计算过程变得简便。通过在实际工程的应用,得到的实测结果与理论计算值也较为一致,说明了用此方法分析硬壳层地基的平台插桩是合理、实用的。  相似文献   

15.
孙永泰 《海洋工程》2008,26(1):93-97
对平台液压升降模拟仿真系统研究的必要性进行分析,针对自升式平台作业工况和机理,提出总体设计方案,进行各部分的研究设计。在软件方面,建立虚拟仪器测试系统,该系统的建立实现了平台升降系统的仿真及液压阀件的测试。  相似文献   

16.
Mobile jack-up drilling rigs are deployed at many locations during their service life. This necessitates retrieval of the platform’s legs and spudcan footings before the rig move. In soft soils, where the spudcans embed deeply, the extraction process can be difficult, time consuming and therefore costly. Water jetting systems, devised to ease spudcan extraction, are a common feature on modern jack-up units. However, their effectiveness in reducing the pull-out load required is questioned by the offshore industry. To investigate their efficiency, centrifuge experiments of a reduced scale spudcan model with jets have been performed at the University of Western Australia. The footing was extracted from penetrations of up to 1.5 diameters in normally consolidated clay. Similar to spudcan extraction in the field, these were carried out under load control, applying a constant extraction force. Both influences of pull-out load magnitude and jetting flow rate were investigated. The study demonstrates that jetting is efficient in facilitating spudcan extraction, as it reduces the required uplift load. Practical guidance is provided in applying the results to field conditions.  相似文献   

17.
The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.  相似文献   

18.
The paper presents an overview of the recent contributions of centrifuge modelling to the understanding of soil-structure interaction and the development of design and predictive methods in the field of mobile jack-up drilling rig foundations. Both advantages and limitations of the centrifuge methods are detailed and key examples are presented. The benefits provided by centrifuge modelling to the development of analysis methods that are now being used within the jack-up industry are highlighted. To conclude, industry trends and research opportunities are discussed, as is the possible role of the geotechnical centrifuge in finding solutions to these new needs.  相似文献   

19.
Jack-up units are extensively playing a successful role in drilling engineering around the world, and their safety and efficiency take more and more attraction in both research and engineering practice. An accurate prediction of the spudcan penetration depth is quite instrumental in deciding on whether a jack-up unit is feasible to operate at the site. The prediction of a too large penetration depth may lead to the hesitation or even rejection of a site due to potential difficulties in the subsequent extraction process; the same is true of a too small depth prediction due to the problem of possible instability during operation. However, a deviation between predictive results and final field data usually exists, especially when a strong-over-soft soil is included in the strata. The ultimate decision sometimes to a great extent depends on the practical experience, not the predictive results given by the guideline. It is somewhat risky, but no choice. Therefore, a feasible predictive method for the spudcan penetration depth, especially in strata with strong-over-soft soil profile, is urgently needed by the jack-up industry. In view of this, a comprehensive investigation on methods of predicting spudcan penetration is executed. For types of different soil profiles, predictive methods for spudcan penetration depth are proposed, and the corresponding experiment is also conducted to validate these methods. In addition, to further verify the feasibility of the proposed methods, a practical engineering case encountered in the South China Sea is also presented, and the corresponding numerical and experimental results are also presented and discussed.  相似文献   

20.
The interaction between a spudcan and an existing footprint is one of the major concerns during jack-up rig installation. The influence of spudcan-footprint interaction has recently been well addressed by a number of researchers. A lack of investigation exists in mitigating spudcan-footprint interaction issues. In the field, stomping and successive repositioning is conventionally used in installing a rig adjacent to an existing footprint. Water jetting and perforation drilling are also sometimes suggested. This paper reports a measure for easing spudcan-footprint interaction issues, with the efficiency of a spudcan with 4 slots tested through model tests carried out at 1 g on the laboratory floor. The soil conditions tested simulate soft to moderate seabed strength profiles close to the mudline, varying the undrained shear strength. The most critical reinstallation locations of 0.5D and 1D (D = spudcan diameter) and existing footprint depths of 0.33D and 0.66D were investigated. By comparing with a conventional spudcan, the spudcan with slots reduced the induced maximum moment, horizontal force, and horizontal sliding distance by up to 80%, 40%, and 98% respectively. Critically, no additional operations, such as stomping/repositioning, perforation drilling, water jetting, are required to be performed offshore.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号