共查询到20条相似文献，搜索用时 593 毫秒
1.
The present paper is Part III of a series of three papers on the methods useful for ultimate limit state assessment of ships and ship-shaped offshore structures. It is focused on the methods for the progressive collapse analysis of hull girders under bending moments, in contrast to the previous two papers (Parts I and II), respectively, dealing with methods for the ultimate limit state assessment of unstiffened plates and stiffened panels. An AFRAMAX-class hypothetical double hull oil tanker structure designed by IACS common structural rules (CSR) method is studied as an illustrative example. The ultimate vertical bending moment capacity of the hull structure is then analyzed by ANSYS FEA, ALPS/HULL, and IACS CSR methods, and their resulting computations are compared. 相似文献
2.
The present paper is Part II of a series of three papers on methods useful for the ultimate limit state assessment of ships and ship-shaped offshore structures. In contrast to Part I [Paik et al., 2007a. Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: Part I unstiffened plates, Ocean Engineering, doi:10.1016/j.oceaneng.2007.08.004] that deals with unstiffened plates, the present paper (Part II) is focused on methods for the ultimate limit state assessment of stiffened plate structures under combined biaxial compression and lateral pressure actions. The object structure is the bottom part of an AFRAMAX-class hypothetical double-hull oil tanker structure designed by IACS common structural rules (CSR) method, that is the same ship studied in Part I. Three candidate methods, namely ANSYS nonlinear finite element method, DNV PULS method, and ALPS/ULSAP method, are employed for the present study. The results and insights developed from the present study are summarized in terms of ultimate strength characteristics of bottom-stiffened plate structures. 相似文献
3.
The main objective of this study is to numerically investigate the characteristics of ultimate compressive strength of stiffened panels with opening and also to fit the design-oriented formulae. For this purpose, three series of well executed experimental data on longitudinally stiffened steel plates with and without opening subjected to the uniform axial in-pane load which is carried out to study the buckling and post-buckling up to the final failure are chosen. Also, a nonlinear finite element method capable of efficiently analyzing the large elasto-plastic deflection behavior of stiffened panels is developed and used for simulation. The feasibility of the present simulation process is confirmed by a good agreement with the experimental results. More case studies are developed employing the simulation process to analyze the influence of various design variables on the reduction rate of ultimate strength of stiffened panel induced by opening. Based on the computed results, two design formulae are fitted and the accuracy of design formulae is studied. Furthermore, the viability of the design formulae for practical engineering is proved. 相似文献
4.
《中国海洋工程》2020,(4)
An investigation is conducted on the static ultimate limit state assessment of ship hull plates with elastically restrained edges subjected to axial compression. Both material and geometric non-linearities were considered in finite element(FE) analysis. The initial geometric imperfection of the plate was considered, while the residual stress introduced by welding was not considered. The ultimate strength of simply supported ship hull plates compared well with the existing empirical formula to validate the correctness of the applied boundary conditions, initial imperfection and mesh size. The extensive FE calculations on the ultimate strength of ship hull plates with elastically restrained edges are presented. Then a new simple empirical formula for plate ultimate strength is developed, which includes the effect of the rotational restraint stiffness, rotational restraint stiffness, and aspect ratios. By applying the new formula and FE method to ship hull plates in real ships, a good coincidence of the results between these two methods is obtained, which indicates that the new formula can accurately predict the ultimate strength of ship hull plates with elastically restrained edges. 相似文献
5.
The new simple design equations for predicting the ultimate compressive strength of stiffened plates with initial imperfections in the form of welding-induced residual stresses and geometric deflections were developed in this study. A non-linear finite element method was used to investigate on 60 ANSYS elastic–plastic buckling analyses of a wide range of typical ship panel geometries. Reduction factors of the ultimate strength are produced from the results of 60 ANSYS inelastic finite element analyses. The proposed design equations have been developed based on these reduction factors. For the real ship structural stiffened plates, the most general loading case is a combination of longitudinal stress, transverse stress, shear stress and lateral pressure. The new simplified analytical method was generalized to deal with such combined load cases. The accuracy of the proposed equations was validated by the experimental results. Comparisons show that the adopted method has sufficient accuracy for practical applications in ship design. 相似文献
6.
The failure of a ship hull girder is governed by buckling and plastic collapse of the deck, bottom and side shell steel stiffened plates. The stiffened steel plating in ships is generally subjected to both in-plane and out-of-plane loading and is more important to understand the characteristics of these panels under buckling. Tests are reported on the collapse load of stiffened plates with and without cutout and with reinforced cutout under uniaxial compression. A generalized computer program for the semi-analytical solutions proposed by various investigators based on strut approach and orthotropic plate approach, and a finite element analysis program based on orthotropic plate approach are developed. The panels are also analysed using the finite element analysis software ANSYS. An approximate method based on strut approach is proposed to calculate the collapse load of stiffened plates with cutouts and initial imperfections. The reduction in strength of the panels due to the presence of square cutout, rectangular cutout and increase in strength due to reinforcement around rectangular cutout are calculated based on the test results. Comparisons are made between the test results and predictions based on semi-analytical solutions and finite element analyses, and the uncertainty parameters calculated are discussed. Based on this study it is concluded that the cutout can be reinforced with a maximum increase in strength up to 19% for plate initiated failures. 相似文献
7.
It is well known that pitting corrosion occurring on surface of hull structural plate will surely result in a significant degradation of the ultimate strength of the hull structural plate. This report aims at development of an assessing formula for ultimate strength of hull plate with pitting corrosion damage under the biaxial in-plane compression loading. The ultimate strength assessment model that is in terms of the corroded volume loss was deduced in theory, and which was then completed through numerical experiment by employing nonlinear finite element analyses for series of corroded plate models. Meanwhile, pitting corrosion in actual ship hull was analyzed and simulated, which ensured that all the assumptions for the finite element model parameters were in accord with the actual hull plate with pitting corrosion damage. Furthermore, the effects of plate slenderness, the linear factors at the plate edges and the ratio between the transverse and the longitudinal in-plane stresses on the ultimate strength reduction related to the corroded volume loss were discussed. The ultimate strength assessment formula being in terms of corroded volume loss developed in this research is expected to be applicable to assess the ultimate strength of the hull structural plate with pitting corrosion damage. 相似文献
8.
Sang-Rai Cho Joonmo Choung Chang-Min Oh Kang-Su Lee Jung-Yeob Kim 《Ocean Engineering》2010,37(8-9):770-776
CSRs (Common Structural Rules for bulker and tanker), which came into effect in 2006, invoke the concept of the ultimate strength of hull girders. While numerous studies associated with the ultimate capacities regarding global hull girders and stiffened panels have been carried out, there are few application cases of the ultimate strengths for deck machineries and their supporting structures. In the present study, nonlinear finite element analyses have been performed to obtain ultimate capacities for a size 450 DIN type bollard including hull foundation structures for which elastic strength assessments based on allowable stress analyses were jointly carried out by a Mooring Fitting SWL Standardization Committee consisting of four major Korean shipbuilders (DSME, HHI, HHIC, and SHI) in 2003. The plastic hardening property is identified from a comparison of the results of ultimate strength simulations and a bollard tension tests performed by the committee. It is assumed that the ultimate load is the corresponding load point when the deformation slope of the bollard column reaches the critical slip angle. It is concluded that the reinforcements appear to be effective with respect to the allowable stress criterion, but are not substantially effective from the point of view of ultimate capacities. In other words, structural reinforcements based on allowable stress analyses may noticeably increase production costs, but do not remarkably raise the ultimate capacities. 相似文献
9.
为了研究循环载荷作用下扶强材初始损伤对其极限强度的影响,进行了14组扶强材的循环加载试验和分析。构造了考虑材料累积损伤完整、断筋和大变形的扶强材单元极限承载力计算公式,提出了相应循环载荷作用下损伤扶强材单元的端缩曲线表达式和船体梁极限强度计算的简化逐步破坏法。编制了循环载荷作用下船体梁损伤极限强度计算程序,进行了船体梁极限强度计算,并与有限元结果进行对比。研究结果表明：改进的损伤扶强材模型可较为准确地描述扶强材材料损伤的完整、断筋和大变形的极限承载力退化情况,扶强材腹板断裂的损伤相较初始大变形及材料累积损伤形式承载力下降程度更明显;所提出的循环载荷作用下损伤船体梁极限强度计算的简化逐步迭代方法,能定量地计算扶强材在不同类型损伤下的极限承载力退化程度,具有较高精度,方便易行,可应用于工程设计。 相似文献
10.
This paper firstly figures out a similar scale model regarding ultimate strength experiment of a typical ultra large container ship (ULCS) through combined ultimate longitudinal bending and torsion analysis, in which the similarity theory is proposed to design the scale model for reflecting the progressive collapse behaviors of true ships in ultimate strength model test. The present study presents the similarity between scale model and true ship in cross-section considering the height of neutral axis, the section modulus, the inertia moment about neutral axis and the polar inertia moment should fit the geometrical similarity theory, and in strength considering buckling strength and shear ultimate strength of plates and stiffened panels should fit the strength similarity theory. Numerical investigations are conducted on the ultimate strength of a 10,000 TEU container ship and the similar scale model under pure hogging bending, pure torsion and combined bending and torsion, respectively. The nonlinear finite element method (NFEM) is adopted considering the effects of initial deformations and both material and geometric nonlinearities. Finally, the numerical results are compared with each other and discussed showing a good agreement in both elastic and inelastic range during the progressive collapse behaviors, which means the similar scale model can represent the true ship regarding ultimate strength test. And the similarity theory is verified quite stable after the uncertainty analysis. 相似文献
11.
船舶与海洋结构在服役期间会遭受电化学和微生物侵蚀等多种腐蚀环境影响,加筋板作为此类结构的主要受力构件,其表面易产生不规则形态的点蚀,引起构件的强度退化。利用ANSYS有限元软件构建加筋腹板遭受随机点蚀损伤的加筋板有限元模型,研究带板长宽比、带板长细比、加筋长细比和腐蚀体积损失率对加筋板极限强度的影响。研究结果表明,加筋遭受同等腐蚀体积损失率下,带板长宽比变化对极限强度退化的影响很小,但带板长细比和加筋长细比变化产生的影响明显;带板长细比越大,极限强度退化越严重,而加筋长细比越大,极限强度退化反而越小。针对文中研究的加筋板,当加筋长细比为 0.2时,腐蚀体积率为14%的随机点蚀导致结构极限强度退化程度达到约14.0%。因此,加筋的随机点蚀损伤会显著削弱加筋板结构的极限强度,其影响不可忽略。 相似文献
12.
为了快速并有效地计算海洋平台等薄壁箱型梁结构的约束扭转极限承载能力,进行了薄壁梁约束扭转极限承载能力简化计算方法研究.基于塑性极限状态分析理论,提出了薄壁梁约束扭转极限状态应力分布假设,将薄壁梁视作为一系列由主要支撑构件和扶强材支撑的板格,推导了薄壁梁约束扭转极限承载能力上限的计算公式.应用非线性有限元方法验证了所提假设和计算公式的精度,将所提方法应用于箱型梁模型和半潜平台的约束扭转极限承载能力的计算分析,并与非线性有限元结果进行了比对,结果表明,本方法具有较高的精度,可用于海洋平台等薄壁梁的扭转极限承载力上限的估算. 相似文献
13.
WEI Dong ZHANG Shengkun
Ph.D. Candidate School of Naval Architecture Ocean Engineering Shanghai Jiao Tong University Shanghai P. R. China
Professor School of Naval Architecture Ocean Engineering Shanghai Jiao Tong University Shanghai P. R. China 《中国海洋工程》1999,(3)
Stiffened Panels are important strength members in ship and offshore structures,A new methodbased on counterpropagation neural networks(CPN)is proposed in this paper to predict the ultimate compres-sive strength of stiffened panels.Compared with two-parametric polynomial,this method can take more pa-rameters into account and make more use of experimental data.Numerical study is carried out to verify thevalidation of this method.The new method may find wide application in practical design. 相似文献
14.
Artificial neural networks and their application to assessment of ultimate strength of plates with pitting corrosion 总被引：1，自引：0，他引：1
The potential for the structural capability degrading effects of both corrosion and fatigue induced cracks are of profound importance and must be both fully understood and reflected in vessel's inspection and maintenance programme. Corrosion has been studied and quantified by many researchers, however its effect on structural integrity is still subject to uncertainty, particularly with regards to localized corrosion. The present study is focused on assessing the effects of localized pitting corrosion on the ultimate strength of unstiffened plates. Over 265 non-linear finite-element analyses of panels with various locations and sizes of pitting corrosion have been carried out. The results indicate that the length, breadth and depth of pit corrosion have weakening effects on the ultimate strength of the plates while plate slenderness has only marginal effect on strength reduction. Transverse location of pit corrosion is also an important factor determining the amount of strength reduction. When corrosion spreads transversely on both edges, it has the most deteriorating effect on strength. In addition, artificial neural network (ANN) method is applied to derive a formula to predict ultimate strength reduction of locally corroded plates. It is found out that the proposed formulae can accurately predict the ultimate strength of locally corroded plates under uniaxial in-plane compression. 相似文献
15.
防波堤风险分析研究框架 总被引：1，自引：0，他引：1
介绍了防波堤风险分析研究的内容、方法和目前的研究进展。防波堤风险分析包涵四个主要方面:防波堤风险辨识、防波堤风险估计、防波堤风险评价和防波堤风险控制。具体内容包括:防波堤系统正常使用极限状态和承载力极限状态的界定,波浪不确定性的识别和描述,防波堤失效模式的探讨,单一模式失效概率和系统失效概率的计算,两种极限状态失效后果的量化,成本-获益分析,效用分析,可接受风险准则和降低风险的措施。防波堤风险分析的目的在于为决策者明确工程中存在的诸多不确定性因素,提供充足信息,实现项目的决策优化。 相似文献
16.
根据极限平衡和极限分析方法,首先建立了软土地基土体上海底管线的极限承载力计算公式.当地基处于极限状态时,基础作用于地基的全部荷载应等于该地基土体的承载能力,根据这一关系式可以推导出海底管线沉降量的计算公式.最后通过对试验结果的分析,证实所采用的计算方法是可行的. 相似文献
17.
A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive. 相似文献
18.
This paper is an attempt to contribute to the improvement of an analysis model within overall structural synthesis procedure for the multi-deck ships. The paper is organized in two parts: modeling principles and model validation. Principles of the proposed generic model formulation on the global and sub-structure levels are given in detail while the load model is briefly summarized. The basic building blocks (macro-elements and gross-elements) for the modeling of ordinary stiffened panels, combining numerical and analytical approaches, are presented and discussed w.r.t. requirements for a multi-deck structure. Different surrogates (sets of elements and ordinary macro-elements) used for equivalent modeling of large side openings are evaluated, since the reduced shear stiffness of superstructure sides has large influence on the hull girder stress distributions along the entire cross section height. The generic ship models developed using outlined principles and the basic building blocks are further validated through complex examples of a large cruise ship and a livestock carrier. On the global level, the accuracy of the generic model w.r.t. the longitudinal stress distribution over ships height is compared with a standard full ship FE model. The results confirmed that the suggested structural modeling principles, based on the generic FE model can be applied for the fast investigation of different structural topological/geometrical concepts as well as for the ordinary scantling/material optimization. 相似文献
19.
Jeom Kee Paik 《Ocean Engineering》2009,36(3-4):266-276
The main objective of the present paper is to numerically examine the residual ultimate strength characteristics of steel plates with longitudinal cracks under axial compressive actions. The present paper is a sequel to the author's previous paper [Paik, J.K., 2008. Residual ultimate strength of steel plates with longitudinal cracks under axial compression—Experiments. Ocean Engineering 35, 1775–1783]. In contrast to the previous paper, the present paper deals with nonlinear finite element method investigations. Because the test programme is usually limited to a few test models in number for many reasons, the application of nonlinear finite element methods is often more beneficial to handle a more variety of parameters of influence. In the present paper, the insights developed from a series of ANSYS nonlinear finite element method computations are documented, where the effects of the crack orientation, the crack location, the crack size, the plate thickness, and the plate aspect ratio on the residual ultimate strength of steel plates with longitudinal cracks under axial compression are discussed. The insights developed from the present work will be useful for cracking damage-tolerant design of steel-plated structures and also for health monitoring or condition assessment of aging steel-plated structures with cracking damages. 相似文献
20.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example. 相似文献