首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 125 毫秒
1.
The maximum internal tangential stress is a critical parameter for the design of the PDC (polycrystalline diamond compact) die that has been widely applied to offshore oil drilling. A new simple equation for the calculation of the stress is developed, and verified by the test data from Kingdream Corp. of China, the largest bit Company in China. An opti- mum method for the design of the PDC die is presented and demonstrated in detail, and software for the design and FEM analysis of the die is developed on the basis of the method. This software has been used in oil industry in recent years.  相似文献   

2.
An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%—20% and the piles‘ bearing state is improved greatly.  相似文献   

3.
A design method of reinforced concrete (R. C.) offshore platforms with nonlinear finite element analysis is proposed. According to the method, a computer program is developed. In this program nonlinear constitutive relationships and strength criteria of concrete and steel bars are included, and the progressive cracking and crushing of the concrete are taken into account. Based on the stress distribution obtained by the nonlinear finite element analysis, the amount of reinforcement in the control sections can be computed and adjusted automatically by the program to satisfy the requirement of the design. The amount of reinforcement required in the control sections, which are obtained with the nonlinear finite element analysis, is agreeable to that obtained in the experiment. This shows that the design method of R. C. offshore platform with the nonlinear finite element method proposed by the authors is reliable for practical use.  相似文献   

4.
Fatigue design method is usually used for estimating whether a platform structure meets the requirements of fatigue resistance. It is described in API RP-2A and ZC rules for fixed offshore platforms, in which the allowable stresses for fatigue design are defined. In this paper discussed are the allowable stresses related factors, such as wave climate, structural response, fatigue behaviour of structural members.  相似文献   

5.
Optimum Design of Structure Shape for Offshore Jacket Platforms   总被引:1,自引:1,他引:0  
With the introduction of the design variables of nodal coordinates,which reflect the em-bedded depth of the pile and the jacket bed height,a shape optimum design model for offshore jacket plat-forms is established.A sequential two-level optimum algorithm is developed based on the design variablegradation.On the basis of the finite element method,the sensitivity of the objective function and nodal dis-placement is analyzed.As an example,the BZ281 oil storage offshore platform,which lies in the Bohai oilfield,is designed with the shape optimum model.The results are compared with the cross-section optimumdesign.The tendency of design variables and its reasons in the two methods are analyzed.In the shapeoptimum design,the value of objective function is obviously smaller than that of the initial design and thecross-section optimum design.Therefore,the advantage of structure shape optimum design for jacket plat-forms is remarkable.  相似文献   

6.
The homotopy method is utilized in the present inverse hull design problem to minimize the wave-making coefficient of a 1300 TEU container ship with a bulbous bow. Moreover, in order to improve the computational efficiency of the algorithm, a properly smooth function is employed to update the homotopy parameter during iteration. Numerical results show that the homotopy method has been successfully applied in the inverse design of the ship hull. This method has an advantage of high performance on convergence and it is credible and valuable for engineering practice.  相似文献   

7.
- In this paper, a computation method has been developed so as to compare the finite element method (FEM) with the test results directly. The structure is divided into the "master" and "slave" degrees of freedom. The simplified model can be obtained with modal reduction. Then the design sensitivity analysis of the eigenvalues and eigenvectors has been carried out using the modal frequency and modal shape of the test. A two-story frame structure and a jacket model structure have been calculated. Meanwhile, the modified coefficient, the FEM computational and experimental values have been given. It has been shown that the FEM model modified using the test modal value is efficient.  相似文献   

8.
Stochastic Response Analysis of Piled Offshore Platforms to Earthquake Load   总被引:1,自引:0,他引:1  
- In this paper, using the theory of stochastic analysis of the response to earthquake load, a stochastic analysis method of the response of piled platforms to earthquake load has been established. In the method, the strong ground motion is considered as three dimensional stationary white noise process and the pile-soil interaction and water-structure interaction are considered. The stochastic response of a typical platform to eqrthquake load has been computed with this method and the results compared with those obtained with the response spectrum analysis method. The comparison shows that the stochastic analysis method of the response of piled platforms to earthquake load is suitable for this kind of analysis.  相似文献   

9.
郄禄文  Byung  Ho  CHOI 《中国海洋工程》2010,24(1):29-40
In the present study,the reliability design of semicircular breakwater is based on the verification of the rules defined by standard specifications,where partial coefficients are introduced to ensure safety.The reliability of the semicircular breakwaters has been analyzed by using the Hasofer-Lind method to determine the reliability index of structure that has correlated loads,utilizing the long-term observed wave data at a given place.The relation curve between reliability index and safety factor in the traditional design method,as well as the relationships between reliability index and partial coefficients,have been obtained.This paper proposes values of partial coefficients for the design expression of semicircular breakwaters in the cases of anti-sliding and anti-overturning.  相似文献   

10.
- The ultimate strength analysis of offshore jacket platforms is a research project which has been developed in recent years. With the rapid development of marine oil industry, the departments of design and IMR (Inspection, Maintenance and Repair) in the offshore engineering have attached great importance to this project. The research procedure applies to both the stress check of new design platforms and the whole safety assessment of existing platforms. In this paper, we combine the pseudo non-linear technique with the linear analysis program and successfully analyze the ultimate strength of the space frame structure subject to the concentrated load and a real jacket platform subject to the dead load and environmental load.  相似文献   

11.
For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors are developed. Finally, the factors of load, resistance and load combination for the offshore jacket platforms in the Bohai Bay are calibrated and the corresponding design formulae are recommended. The results are proved to be rational in practice, and also illustrate that the proposed target reliability index for offshore jacket platforms in the Bohai Bay is also appropriate.  相似文献   

12.
For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors...  相似文献   

13.
The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms.  相似文献   

14.
1.IntroductionLoad and Resistance Factor Design(LRFD)isthe commonly adoptedreliability-based designfor-mat for structural design(CNE,1990;AAHTO,1994;OMTC,1983;CMC,1984).Code calibra-tionforthe LRFDformat is a processto determinethetarget reliability by de…  相似文献   

15.
The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for off-shore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly investigated. The target reliability index for structural components, tubular joints and piles of offshore jacket platforms are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms.  相似文献   

16.
Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method.  相似文献   

17.
Reliability-Based Design for Jacket Platform Under Extreme Loads   总被引:7,自引:0,他引:7  
In this paper, reliability analysis for the offshore jacket platform with the interaction of structure- pile- soil under extreme environmental loads is carried out. The inherent uncertainties of the environmental load, foundation soil, platform itself, and calculating models are evaluated. The action of extreme loads on the offshore platform is modeled as a function of extreme wave height. The system capacity of the whole platform is determined by nonlinear pushover analysis, and the relevant probability property is obtained by the simulation method. The reliability model for the whole jacket platform is described as the relationship between the load and resistance based on the offshore design codes. The reliability of whole platform is calculated by the analytical method and the importance sampling method on the basis of a case study for a tripod jacket platform.  相似文献   

18.
—By means of nonlinear pushover collapse analysis approach,the aseismic reliability analysesof two offshore jacket platforms in the Bohai Gulf in China are studied according to their ocean locationand environmental loadings there.On the basis of those analyses,an aseismic reliability analysis approachis presented.The results show that the aseismic reliability of those platforms is high.Also it is proved thatthis aseismic reliability analysis approach is simple,practical and reliable.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号