共查询到18条相似文献，搜索用时 593 毫秒
1.
海底沉积物声学性质原位测量系统海上试验研究 总被引：1，自引：0，他引：1
提出了一种新的海底沉积物声学性质原位测量方法,介绍了新研制的海底沉积物声学性质原位测量系统。在青岛近海海域对该系统进行了海试,获得了各个站位的声速数据。将测得的各站位的声速与不同海域的沉积物声速进行对比分析,并对各个站位的声速与沉积物的平均粒径进行了相关性分析,发现与以往研究结果一致,沉积物声速与沉积物类型相关,不同类型的沉积物的声速有明显差异;声速与平均粒径相关性较好,粒径越大,声速越高。结果表明,利用海底沉积物声学性质原位测量系统测得的原位声速是正确的,它能快速准确地得到海底沉积物的声速值。 相似文献
2.
3.
原位测量技术在黄海沉积声学调查中的应用 总被引：8，自引：3，他引：8
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。 相似文献
4.
5.
介绍了一种液压驱动贯入式海底沉积声学原位测量系统的电路控制单元的研究实现过程,以及该控制单元在南海北部海底沉积声学调查中的应用。该电路控制单元以Cortex-A8处理器为核心,集成大容量FLASH存储器,与单片机接口控制板进行串口通讯,实现对声学发射采集单元和机械液压贯入单元的可视化控制和监测。基于该电路控制单元,海底底质声学原位测量系统兼具自容式和在线式两种工作模式,可自容记录或实时采集声学原位测量单元在海底的工作状态数据、海底沉积物声速和声衰减系数等声学特性数据。该声学原位测量系统的实验室联调及南海海试结果表明,使用该电路控制单元对海底底质声学测量过程的监测与控制是有效的,对精确获取海底底质的原位声学特性有重要作用,可以促进海底底质声学原位测量系统的产品化。 相似文献
6.
7.
8.
海底沉积物声学响应中的颗粒与孔隙因素 总被引：1，自引：0，他引：1
颗粒参数是描述海底沉积物的基本要素之一,它们深刻地影响到海底沉积物的物理力学性质和声学性质.统计分析结果表明,海底沉积物颗粒度参数中以孔隙度、干密度、中值粒径、平均粒径、颗粒形状之间的关系最为密切.孔隙度与体积干密度呈强线性相关,与平均粒径、中值粒径也呈弱线性相关.在沉积物声速与物理参数的单参数和双参数的经验公式讨论中,显示出声速分别与孔隙度和平均粒径之间具有密切相关关系.根据沉积物颗粒堆垒结构和颗粒形状、粒径大小等,可以计算沉积物的理论孔隙度,从而判定沉积物的声衰减系数. 相似文献
9.
海底表层沉积物具有多相、多颗粒、多形态的组成结构，导致其声学特性复杂多样。通过分析压缩波速度和切变波速度特性的研究现状，指出有待于解决的科学问题和关键技术问题。在分析国内外有关海底沉积层声速特性研究基础上，提出采取系统、可控的实验测量手段解决当前测量存在的4点问题。综合分析了压缩波速度和切变波速度存在的统计回归关系和理论分析关系，探讨了当前地声反演、采样样品声学测量、原位声学测量3种方法存在的测量尺度、测量频率、测量状态等的差异，探讨建立不同测量方法和测量技术对测量结果进行统一性解释的方法，从而获得不同类型、不同区域的海底表层沉积物真实的声速特性。最后，从实验室声学测量、物理力学参数测量、流固耦合特性分析、原位测量及海底监测、采样测量与原位测量的误差分析及校正、海底大纵深声学测量6个方面提出技术需求，为提高声学探测海洋和海底的精度服务，推动海洋声学探测和海洋工程发展。 相似文献
10.
为研究深海海底沉积物声学特性与物理性质相关关系,于2016年11月在实验室对水深3164～5 592 m的菲律宾海深海海底沉积物柱状样品的声学特性进行测量,获取了沉积物声速、声速比、声阻抗、声阻抗指数等声学特性参数。结合沉积物的孔隙度和密度等物理性质参数,分析了海底沉积物声速、声速比、声阻抗、声阻抗指数与孔隙度、密度的相关关系,建立了该海域海底沉积物声学特性回归方程。研究结果表明:研究区深海数据与浅海回归方程符合度较差,与深海回归方程符合度较好;Hamilton校正方法有助于修正实验室测量引起的温度和压力误差,声速比与Hamilton方程符合度比声速好;声阻抗和声阻抗指数与物理性质参数的相关性优于声速和声速比。此外,研究认为由于海底沉积物的沉积环境较为复杂,其声学特性回归方程存在差异。由于上述差异的存在,在使用基于不同海域数据建立的回归方程进行海底沉积物声学特性预测时,应加以区别对待。该研究丰富了深海海底沉积物声学数据,对促进深海海底沉积物声学深入研究具有一定的借鉴意义。 相似文献
11.
Gwang-Soo Lee Gwang-Hoon Lee Soo-Choul Park Gil-Young Kim Dong-Geun Yoo 《Marine Georesources & Geotechnology》2013,31(2):96-114
High-resolution seismic survey and sediment core sampling were conducted to investigate acoustic characteristics of gas-bearing sediments in Jinhae Bay, the southeast of Korea. The sediment in Jinhae Bay is mostly homogenous mud deposited after the Holocene transgression. Along with the 410 km of chirp seismic profiling, five piston core samples were collected on the track lines. Gassy sediments are common and occur widely in the bay. Core samples were analyzed for sediment texture, physical properties (porosity, water content, bulk density, and grain density), acoustic properties (compressional wave velocity and attenuation), and electrical resistivity. X-radiograph image analysis was also performed to observe the shape of degassing cracks. There is no significant downcore variation on physical and sediment textures regardless of existence of gas bubbles. However, compressional wave velocity dramatically decreases from average 1480 to 1380～739 m/s for the cores that penetrate the gas-bearing zones. This is probably due to degassying cracks that developed by escaping gases and free gas bubbles that are still trapped in the cores. Electrical resistivity is the only geotechnical property that increases in the gas-bearing zone where compressional wave velocity abruptly decreases. This indicates the possibility of using both electrical resistivity as an index variable as well as to compressional wave velocity to identify gassy sediment microstructure because there are little changes in texture and composition of sediment. 相似文献
12.
This paper describes a system that has been developed to measure compressional wave speed in cored marine sediments onboard ship. The structure enables one to secure an extruded core sample to its base and to move acoustic probes to a desired location, implant them to a specified depth into the sample and perform the measurement. The acoustic measurement system is a pulse-time delay system measuring time difference over a fixed path length and the temperature of the sediment. The time difference and temperature measurement systems are comprised of task oriented components and are housed in a single portable box. The system is adaptable to the various sample sizes obtained with the coring apparatus presently in use. Initial field tests indicate that ship motion has no effect on the system. Data collected from cores has been classified according to sediment type and displays good agreement with data presented by Hamilton (1970). The difference in compressional wave velocity, based on sediment type, for the two studies is 5 m per sec. 相似文献
13.
Study of A Geo-Acoustic Model of Gas-Bearing Sediment and Its Application in Sediment with Low Acoustic Veloctiy 总被引：2，自引：0，他引：2
A new geo-acoustic model for gas-bearing sediment is proposed based on the work of Dvorkin and Prasad, and Biot theory. Only five geophysical parameters: sediment mineral composition, free gas saturation, tortuosity (also known as the structure factor), permeability, and porosity, are considered in the model. A benefit of this model is that we need only five parameters instead of ten parameters in the Biot's formulas for acoustic velocity and attenuation calculation. Here the model is demonstrated with the in-situ experimental data collected from the Hangzhou Bay, China. The results of this study suggest that free gas content in sediment is the most critical condition resulting in a low acoustic velocity (compressional wave). The respective contributions of the other four parameters in the model are also discussed. 相似文献
14.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。 相似文献
15.
Robb G.B.N. Best A.I. Dix J.K. White P.R. Leighton T.G. Bull J.M. Harris A. 《Oceanic Engineering, IEEE Journal of》2007,32(2):484-496
Geoacoustic inversion requires a generic knowledge of the frequency dependence of compressional wave properties in marine sediments, the nature of which is still under debate. The use of in situ probes to measure sediment acoustic properties introduces a number of experimental difficulties that must be overcome. To this end, a series of well-constrained in situ acoustic transmission experiments were undertaken on intertidal sediments using a purpose-built in situ device, the Sediment Probing Acoustic Detection Equipment (SPADE). Compressional wave speed and attenuation coefficient were measured from 16 to 100 kHz in medium to fine sands and coarse to medium silts. Spreading losses, which were adjusted for sediment type, were incorporated into the data processing, as were a thorough error analysis and an examination of the repeatability of both the acoustic wave emitted by the source and the coupling between probes and sediment. Over the experimental frequency range and source-to-receiver (S-R) separations of 0.99-8.1 m, resulting speeds are accurate to between 1.1% and 4.5% in sands and less than 1.9% in silts, while attenuation coefficients are accurate to between 1 and 7 dBm in both sands and silts. Preliminary results indicate no speed dispersion and an attenuation coefficient that is proportional to frequency. 相似文献
16.
The Drag-type In-Situ Acoustic Measurement System (DISAMS) is a new instrument designed for rapid measurement of seabed sediment acoustic parameters, including the sediment sound velocity and acoustic attenuation coefficient. The DISAMS consists of six independent acoustic probes arranged symmetrically such that each side has one transmitting probe and two receiving probes. The entire operation is controlled and monitored in real time by a deck control unit on board, and the center frequency of the DISAMS is 30?kHz. The DISAMS can record full waveforms to determine the sound velocity and attenuation coefficient in the seabed sediment. In addition to site measurements, the DISAMS can also carry out towing measurements, resulting in improved efficiency compared with existing in-situ acoustic measurement systems. This article presents the configuration, electronics, and tests of the DISAMS in detail. Laboratory tests were conducted in a sediment pool, sea trials were carried out in the Zhoushan Islands, and sound velocity and attenuation coefficient data were obtained. The test results demonstrated that the DISAMS performed well and was able to measure the sound velocity and attenuation coefficient rapidly and accurately in both site measurements and towing measurements. 相似文献
17.
Jian-Jun Long 《Marine Georesources & Geotechnology》2013,31(2):176-189
Seabed sediment microstructure has an influence on its acousto-physical properties, and the properties in a length of the sediment column reflect an aspect of the macroscopic behavior of the microstructure. An original measurement method of the sound attenuation within small distance cross sections in a sediment column, and the corresponding approach in data processing to attain an attenuation factor are detailed in the paper. This method was used to measure the compressional wave in series of points with a small distance in the sediment column, and it is shown that exponential attenuation is a type of compressional wave attenuation model for a sediment column in its full length. It indicates that there are various models of compressional wave attenuation in seabed sediments in the South China Sea after comparison of data from other literature. The method of measuring sound attenuation satisfies the sampling space interval in the acoustical forward and inverse problems in seabed sediments, and the original method provides a new approach for finding out sound attenuation mechanism in seabed sediments on small length scale. 相似文献