首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 376 毫秒
1.
通过系列模型试验,对透空水平板下波浪总上托力进行了研究,结果表明:平板下最大总上托力并不与最大冲击压强同步发生。为此,依据试验结果对波浪总上托力产生机理和影响因素进行详细分析,提出透空水平板波浪最大总上托力的计算公式,试验结果表明,该公式与实验值有着较好的一致性。  相似文献   

2.
透空式水平板波浪上托力分布   总被引:9,自引:3,他引:9  
通过系列模型试验,对波浪上托力沿板宽分布进行了详细分析,提出对于透空式平板结构,发生较大冲击压强或上托力的分布主要分为均布型和局部冲击型两类,由此得到压强分布的计算公式。大量试验资料表明,该公式与实验值有着较好的一致性。  相似文献   

3.
透空式水平板波浪上托力计算方法   总被引:6,自引:2,他引:6  
在透空式平板波浪上托力试验研究基础上,针对实际工程应用要求,提出相对简便的透空式平板下波浪局部上托力和最大总上托力计算方法,包括上托力大小、分布宽度和发生位置。对具体工程实例的计算结果表明,该方法与实验值有着较好的一致性。  相似文献   

4.
斜坡上封闭式水平板波浪上托力分布试验研究   总被引:1,自引:1,他引:0  
通过系列模型试验,对斜坡上尾部封闭式平板结构波浪上托力沿板宽分布进行了详细分析,提出板下最大冲击压强和最大总上托力并不一定同时出现,其分布形态可分为局部冲击型和均匀型。由于封闭空气层和底部斜坡影响,较大总上托力形成机理不尽一致,其均匀分布宽度也不相同,可分为气压型和反射型两类,由此提出分类标准,并分别得到压强分布的计算公式。  相似文献   

5.
透空式进海路是连接人工岛与陆岸的一种新型结构,其所受波浪力是工程设计中重点关注的问题。本文开展物理模型试验,通过改变水深、波高、桥面底高、桥面宽度等试验条件,研究透空式进海路波浪力的变化规律。试验测量透空式进海路上部结构的动水压强分布,分析得到结构的浮托力和水平波浪力。研究发现:透空式进海路上部结构波浪力的主要影响因素为桥面相对净空高度,在相对净空高度接近0时,桥面浮托力达到最大值。通过分析试验数据,并参照文献中的已有波浪力计算方法,建立透空式进海路上部结构浮托力和水平波浪力的计算公式,公式计算结果与试验结果符合较好,对透空式进海路工程设计具有重要指导意义。  相似文献   

6.
挡板透空码头水平波浪力计算方法的探讨   总被引:1,自引:0,他引:1  
隋华  王文鼎  高晨 《海岸工程》2009,28(3):20-26
目前,对透空式高桩梁板码头的桩基和墩柱波浪力的计算,现行《海港水文规范》中有相应的公式,但对一侧增设挡浪板及上部结构构件的透空式高桩梁板码头水平波浪力的计算,规范并没有明确规定相应的计算公式。从挡板透空码头设计中水平波浪力的计算分析入手,说明挡板波浪力采用不同计算方法的差异性,并针对某设计工程进行了实例分析,通过相关文献、现行规范及物理模型试验等三种不同方法所得计算结果的比较,探讨一种适合挡板透空码头的水平波浪力的计算方法,供工程设计时参考。  相似文献   

7.
波浪对透空外双壁筒柱的绕射   总被引:3,自引:2,他引:3  
滕斌  韩凌 《海洋工程》2001,19(1):32-37
应用透空壁内流体速度与两壁间压力差成正比的线性模型,建立了外壁透空的双筒圆柱对波浪绕射的解析解。通过数值计算研究了外壁透空率的大小、内外柱半径之比等因素对桩柱上总波浪作用力和波面高度的影响。数值结果表明圆柱外壁透空系数的增加,将明显地降低圆柱周围的波浪高度和圆柱上的波浪力;内外柱径之比的大小对波浪力和波高的最大值无太大影响,而对波浪力剧烈衰减区的位置和波高的振荡周期有决定作用。  相似文献   

8.
多层挡板桩基透空式防波堤消浪特性试验研究   总被引:14,自引:1,他引:13  
本文回顾了已有的关于透空式防波堤的波浪透射率的理论计算方法,分析了多层挡板桩基透空式防波堤的消浪机理。结合防波堤断面波浪试验,探讨多层挡板桩基透空式防波堤的消浪特性。研究结果表明多层挡板桩基透空式防波堤能够显著消减波浪,它的应用突破了透空式防波堤仅适用于小尺度风浪水域的经验。研究发现影响防波堤消浪效果的因素中,挡板的透空率和设置方式的影响最为显著。文中提出的减小波浪透射率的方法可供设计部门参考。  相似文献   

9.
透空式防波堤周围的非线性波浪传播的数值模拟   总被引:1,自引:0,他引:1  
李熙  王义刚 《海洋工程》2004,22(3):97-101
对非线形波浪在透空式防波堤周围的波浪变形进行了数值模拟,在Boussinesq波浪方程中加入与透空建筑物有关的新的耗散项,从而界定了透空建筑物引起的部分反射和透射,波浪折射衍射的传播过程通过控制方程求解。波浪控制方程通过有限差分方法求解。模型应用于模拟波浪经过具有部分反射的群桩式透空结构,结果表明透空式防波堤可以有效地衰减波浪,是重力式结构的一种替代形式。  相似文献   

10.
利用瞬态全场测量技术———粒子图像测速(PIV)技术,研究了波浪对透空式建筑物上部结构冲击过程的流场变化特性。通过对采集到的CCD图像互相关分析,直观地显示了波浪冲击作用发生时结构物底面的流场状态,得到瞬间全场流体水质点速度矢量,并且应用概率分析法研究了冲击压力峰值与波浪水质点运动速度之间的关系。  相似文献   

11.
Uplift Pressure of Waves on A Horizontal Plate   总被引:4,自引:0,他引:4  
1 .IntroductionOwingtotheneedfordevelopingoffshoreresources,moreandmorehollow trussedstructuresareconstructed ,suchasalongshorequays ,islandquays,artificialislands ,bollards ,maritimeplatforms ,etc .Thelargeentitypartofthosemaritimestructuresusuallyconsistsofahorizontalplateabovethestillwaterlevel,anditusuallysuffersfromwaveattacksandthuscaneasilybedestroyed .Toavoidsuchakindofaccidents ,themostimportantistoaccuratelyevaluatetheupliftpressuresofwavesontheplateundervariouswaveconditionsandbound…  相似文献   

12.
护面是海堤和护岸的重要结构,直接抵御波浪作用,可采用人工块体、块石等,种类繁多。采用紧密排列方块石作为护面结构是一种景观性较好的型式,依据方块石厚度不同能抵御不同大小的波浪作用。干砌条石及干砌块石护面曾有一些规范给出过计算方法,但现行规范没有相关内容可供设计参考,已有计算方法的理论分析还存在不足。当波浪与斜坡堤相互作用时,方块石护面出现位移或脱落可能发生在波浪回落最低阶段、波浪破碎打击阶段及破后爬高水流作用阶段,通过研究得到了不同阶段波浪对方块石护面作用力的计算方法。在波浪回落最低阶段,考虑了护面及其下方垫层渗透性影响,通过理论分析建立了低渗透护面浮托压强计算模型,采用物模试验将计算结果与试验测量值进行了对比分析,结果表明总体趋势符合,量值接近;在波浪破碎冲击阶段,基于射流冲击作用原理,提出了波浪在斜坡面破碎冲击压强计算方法,通过试验分析了波浪破碎水深波高比与破波相似参数的关系,利用浅水波理论计算了波浪破碎冲击水流流速;在爬高水流作用阶段,提出了水流引起的方块石护面垂直浮托力及水平拖曳力的计算方法,通过试验结果拟合了浮托力系数和拖曳力系数,验证了水流作用下护面的受力特征。最后,针对方块...  相似文献   

13.
It is well known that wave induced bottom oscillations become more and more negligible when the water depth exceeds half the wavelength of the surface gravity wave. However, it was experimentally demonstrated for regular waves that the bottom pressure oscillations at both first and second wave harmonic frequencies could be significant even for incoming waves propagating in deep water condition in the presence of a submerged plate [16]. For a water depth h of about the wavelength of the wave, measurements under the plate (depth immersion of top of plate h/6, length h/2) have shown bottom pressure variations at the wave frequency, up to thirty times larger than the pressure expected in the absence of the plate. In this paper, not only regular but also irregular wave are studied together with wave following current conditions. This behavior is numerically verified by use of a classical linear theory of waves. The wave bottom effect is explained through the role of evanescent modes and horizontally oscillating water column under the plate which still exist whatever the water depth. Such a model, which allows the calculation of the velocity fields, has shown that not only the bottom pressure but also the near bed fluid velocity are enhanced. Two maxima are observed on both sides of the location of the plate, at a distance of the plate increasing with the water depth. The possible impact of such near bed dynamics is then discussed for field conditions thanks to a scaling based on a Froude similarity. It is demonstrated that these structures may have a significant impact at the sea bed even in very deep water conditions, possibly enhanced in the presence of current.  相似文献   

14.
The wave transmission characteristics and wave induced pressures on twin plate breakwater are investigated experimentally in regular and random waves.A total of twenty pressure transducers are fixed on four surfaces of twin plate to measure the wave induced dynamic pressures.The spatial distribution of dynamic wave pressure is given along the surface of the twin plate.The uplift wave force obtained by integrating the hydrodynamic pressure along the structure is presented.Discussed are the influence of different incident wave parameters including the relative plate width B /L,relative wave height /i H a and relative submergence depth s /a on the non-dimensional dynamic wave pressures and total wave forces.From the investigation,it is found that the optimum transmission coefficient,t K occurs around B /L 0.41 ~ 0.43,and the twin plate breakwater is more effective in different water depths.The maximum of pressure ratio decreases from 1.8 to 1.1 when the relative submergence depth of top plate is increased from 0.8to +0.8.  相似文献   

15.
Boundary element method (BEM) is used to study wave pressure acting on a vertical quay, as well as the uplift forces on a submerged plate. The plate, placed in front of the quay, is bored with holes. The results are then compared with the case of a plate without any perforation.The results showed that: for q/h = 0.45, where q is the depth of submergence of the plate and h is water depth, wave pressure acting on the vertical quay is very similar for plates with or without borings. However, with q/h = 0.20, wave pressure on the quay is changed according to wave periods, widths of the plate, the distance of the plate away from the quay, as well as the ratio of the holes to the plates. Uplift forces exerted on the plate are indeed smaller for plates with borings than without, and decrease with increasing porous ratio. Furthermore, the uplift forces will be the same for the same porous ratios, regardless of these ratios being caused by a single or a double perforation.  相似文献   

16.
顾倩  张宁川 《海洋学报》2017,39(5):123-137
基于物理模型试验,考虑畸形波参数、相对板宽、相对波高等影响因素,就畸形波对平顶双层水平板防波堤作用进行研究。首先对畸形波作用下双层水平板的波浪力分布特征进行了讨论,然后就最大波动压强、结构最大总垂向力与不规则波作用进行了对比分析。结果表明,畸形波作用下,双层水平板最大波动压力出现在前端迎浪区域附近,向尾端逐渐递减。双层水平板4个受力面的压力分布不同且有相位差,4个受力面的最大波动压力时间差约在0.1Tp~0.4Tp范围内变化。与不规则波作用比较,畸形波作用没有显著改变波压包络分布特征,但增大了波压包络强度值。试验范围内,就最大总力而言,两者最大总浮托力比值在1.06~2.45间变化;向下的最大总垂向力比值在1.22~2.07之间变化;就波动压力而言,其增大的幅度与畸形波参数α1相关性最强,随α1的增大而增大,在α1=2.04~3.1试验范围内,畸形波作用时的最大压强比不规则波作用时可约增大20%~80%。就最大波吸力而言,两者的比值与畸形波参数α4相关性最强,随α4的增大而减小。在α4=0.62~0.75试验范围内,最大波吸力强度的比值在1.61~0.87范围内变化。当α4≤0.72时,畸形波作用时的最大波吸力大于不规则波作用时的最大波吸力;当α4 > 0.72时则刚好相反。  相似文献   

17.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号