共查询到18条相似文献，搜索用时 125 毫秒
1.
LI Yucheng 《中国海洋工程》2000,14(1):59-67
—An experimental study of regular wave and irregular wave breaking is performed on a gentleslope of 1:200.In the experiment,asymmetry of wave profile is analyzed to determine its effect on wavebreaker indices and to explain the difference between Goda and Nelson about the breaker indices of regu-lar waves on very mild slopes.The study shows that the breaker index of irregular waves is under less influ-ence of bottom slope i,relative water depth d/L_0 and the asymmetry of wave profile than that of regularwaves.The breaker index of regular waves from Goda may be used in the case of irregular waves, whilethe coefficient A should be 0.15.The ratio of irregular wavelength to the length calculated by linear wavetheory is 0.74.Analysis is also made on the waveheight damping coefficient of regular waves after break-ing and on the breaking probability of large irregular waves. 相似文献
2.
3.
Numerical Simulation of Local Scour Around A Large Circular Cylinder Under Wave Action 总被引：1，自引：0，他引：1
A horizontal two- dimensional numerical model is developed for estimation of sediment transport and sea bed change around a large circular cylinder under wave action. The wave model is based on an elliptic mild slope equation. The wave-induced current by the gradient of radiation stress is considered and a depth integrated shallow water equation is applied to the calculation of the current. The mass transport velocity and the bed shear stress due to streaming are considered, which are important factors affecting the sediment transport around a structure due to waves, especially in reflective areas. Wave-current interaction is taken into account in the model for computing the bed shear stress. The model is implemented by a finite element method. The results of this model are compared with those from other methods and agree well with experimental data. 相似文献
4.
Studies of the breaking criteria for solitary waves on a slope are presented in this paper. The boundary element method is used to model the processes of shoaling and breaking of solitary waves on various slopes. Empirical formulae that can be used to characterize the breaking of solitary waves are presented. These include the breaking index, the wave height, the water depth, and the maximum particle velocity at the point of breaking. Comparisons with the results of other researches are given. 相似文献
5.
Dong Guohai Li Yucheng Wang Yongxue
Lecturer Doctor Dalian University of Technology Dalian
Professor Dalian University of Technology Dalian 《中国海洋工程》1995,(1)
- A large amount of experimental analysis and systematical theoretical calculation has been done by the authors to solve the problem of wave transformation and breaking, considering the effect of both current and topography, but only the wave energy loss due to spilling breaker in the surf zone has been discussed in this paper. Based on test result analysis and calculation with the Stream Function Wave Theory, the wave velocity field at breaking points has been obtained, and it is used to calculate the wave heights after breaking by the VOF (Volume of Fluid) method, in which the governing equations are continuity equation and Navier-Stokes Equation for imcompressible fluids. In the present paper, the improved VOF technique is used to calculate the wave heights of stable regular waves after breaking. Results fit the test data well, which shows that the VOF method is suitable to numerical simulation of regular waves after breaking. Besides, the breaker coefficient B of regular waves in the bore model is a 相似文献
6.
Hyperbolic Mild Slope Equations with Inclusion of Amplitude Dispersion Effect： Regular Waves 总被引：4，自引：2，他引：2
A new form of hyperbolic mild slope equations is derived with the inclusion of the amphtude dispersion of nonlinear waves. The effects of including the amplitude dispersion effect on the wave propagation are discussed. Wave breaking mechanism is incorporated into the present model to apply the new equations to surf zone. The equations are solved nu- merically for regular wave propagation over a shoal and in surf zone, and a comparison is made against measurements. It is found that the inclusion of the amplitude dispersion can also improve model＇ s performance on prediction of wave heights around breaking point for the wave motions in surf zone. 相似文献
7.
A physical parameter, μb, which was used to meet the forcing of primary short waves to be off-resonant before wave breaking, has been considered as an applicable parameter in the infra-gravity wave generation. Since a series of modulating wave groups for different wave conditions are performed to proceed with the resonant mechanism of infra-gravity waves prior to wave breaking, the amplitude growth of incident bound long wave is assumed to be simply controlled by the normalized bed slope, βb. The results appear a large dependence of the growth rate, α, of incident bound long wave, separated by the three-array method, on the normalized bed slope, βb. High spatial resolution of wave records enables identification of the cross-correlation between squared short-wave envelopes and infra-gravity waves. The cross-shore structure of infra-gravity waves over beaches presents the mechanics of incident bound- and outgoing free long waves with the formation of free standing long waves in the nearshore region. The wave run-up and amplification of infra-gravity waves in the swash zone appear that the additional long waves generated by the breaking process would modify the cross-shore structure of free standing long waves. Finally, this paper would further discuss the contribution of long wave breaking and bottom friction to the energy dissipation of infra-gravity waves based on different slope conditions. 相似文献
8.
Analysis of wave-induced liquefaction in seabed deposits of silt 总被引：1，自引：0，他引：1
The dynamic stress introduced in half elastic space by wave loading is characterized by the equation between the magnitude of half cyclic axial stress and cyclic torsion shear stress and the principal stress,whose direction rotates continuously and compression stress on seabed can be calculated by the use of small amplitude wave theory.With relationship curves of saturated silt of liquefaction cycles and cyclic stress ratios obtained by cyclic triaxial-torsional coupling shear tests and curve fitting method to different data points of relative density,it is suggested that the cyclic stress ratio corresponding to constant liquefaction impedance be taken as the critical cyclic stress ratio which implies liquefaction.There exists a linear relationship between critical cyclic stress ratio and relative density under different relative densities.Empirical formula for critical cyclic stress ratios of seabed liquefaction induced by wave loading under different relative densities is established.The possibility of seabed silt liquefaction and its influence factors are analyzed based on the small-amplitude wave theory and the data acquired in laboratory tests. 相似文献
9.
This work presents a new approach for simulating the random waves in viscous fluids and the associated bottom shear stresses. By generating the incident random waves in a numerical wave flume and solving the unsteady two-dimensional Navier-Stokes equations and the fully nonlinear free surface boundaiy conditions for the fluid flows in the flume, the viscous flows and laminar bottom shear stresses induced by random waves axe determined. The deterministic spectral amplitude method implemented by use of the fast Fourier transform algorithm was adopted to generate the incident random waves. The accuracy of the numerical scheme is confirmed by comparing the predicted wave spectrum with the target spectrum and by comparing the nanlerical transfer function between the shear stress and the surface elevation with the theoretical transfer function. The maximum bottom shear stress caused by random waves, computed by this wave model, is compared with that obtained by Myrhaug＇ s model （1995）. The transfer function method is also employed to determine the maximum shear stress, and is proved accurate. 相似文献
10.
Numerical study of wave and longshore current interaction 总被引：1，自引：0，他引：1
Wave and longshore current interaction was examined based on the numerical models.In these models,water waves in the presence of longshore currents were modeled by parabolic mild slope equation,and wave breaking induced longshore currents were modeled by shallow water equation.Water wave provided the radiation stress gradients to drive current.Wave and longshore current interactions were considered by cycling the wave and longshore current models to a steady state.The experiments for regular and irregular breaking wave induced longshore currents by Hamilton and Ebersole（2001） and Reniers and Battjes（1997） were simulated.The numerical results indicate that the present models are effective for simulating the interaction of wave and breaking wave induced longshore currents,and the numerically simulated longshore current at wave breaking point considering wave and longshore current interaction show some disagreement with those neglecting the wave-current interaction,and the breaking wave induced longshore current effect on wave transformation is not obvious. 相似文献
11.
M.S. Kirkgz 《Coastal Engineering》1989,13(4)
Experimental investigation is made on the boundary layers of the transformation zone (i.e. the region between the last symmetrical wave profile depth and the breaking point) of plunging breakers propagating on a smooth beach with 1/12 uniform slope. Using a laser anemometer, the particle velocities are measured at four verticals along the transformation zone for three different steepnesses of waves within the plunging breaker range. The boundary layer flow in the transformation zone is found mostly of turbulent character and vertical distribution of particle velocities does not seem to conform to the classical law of the wall distribution given for steady-flow boundary layers. The results show that free-stream particle velocities, in the boundary layer of the breaker under the crest phase, increase considerably as the wave progresses towards the breaking point. The boundary layer thickness, defined as the velocity-affected region, remains constant throughout the transformation zone but it decreases with increasing deep-water wave steepness for the particular beach slope tested. 相似文献
12.
13.
通过波浪水槽实验，开展不同类型波浪作用下的沙质岸滩演化规律研究工作。本次实验研究不考虑比尺，采用1:10与1:20组成的复合沙质斜坡对岸滩进行概化，选取规则波和椭圆余弦波两种典型波浪作用，对波浪的传播、变形和破碎、上爬、回落过程以及波浪作用前后沙质岸滩床面地形进行了观测，探讨波浪作用下沙质岸滩剖面演化规律。本文实验工况中，规则波作用下，岸滩剖面呈现出沙坝剖面和滩肩剖面，椭圆余弦波作用下的岸滩剖面均呈滩肩形态，发现岸滩剖面形态不仅与波浪作用类型、强度、周期等因素相关，还与波浪破碎的强度等因素有关。通过对实验过程中现象的进行观察和分析，引入了卷破波水舌冲击角的概念。对波浪卷破破碎后形成的水流挟沙运动与岸滩剖面形态的关系进行定性分析，对水舌冲击角与Irribarren参数之间的关系进行定量分析，基于Irribarren参数与岸滩剖面形态的关系初步建立了波浪作用下沙质岸滩剖面形态判别关系式。通过本文实验结果和前人实验结果对趋势线进行拟合，求得其判别系数，判别式能够较好地划分淤积型岸滩、侵蚀型岸滩及过渡型岸滩三种岸滩形态。 相似文献
14.
基于实验室水槽实验,研究了内孤立波在海底山脊地形存在下的破碎过程。实验设置了两层流体的分层环境,定量地控制了上下层水体厚度及密度,使用不同高度的高斯地形模拟实际的海山作用,讨论了不同高度地形作用下内孤立波破碎过程的异同。实验结果表明,内孤立波的破碎过程中由于逆压梯度的存在,在地形处发生边界层分离,产生了底边界层反向射流和涡脱落现象,计算了内孤立波破碎过程中产生的底部切应力的分布。本文通过实验模拟了内孤立波再海山作用下的破碎过程,进一步探究了海山对内孤立波破碎的影响和底部切应力的作用,对于研究自然界中海洋内孤立波在海山区域的破碎现象有参考价值。 相似文献
15.
The characteristics of turbulence created by a plunging breaker on a 1 on 35 plane slope have been studied experimentally in a two-dimensional wave tank. The experiments involved detailed measurements of fluid velocities below trough level and water surface elevations in the surf zone using a fibre-optic laser-Doppler anemometer and a capacitance wave gage. The dynamical role of turbulence is examined making use of the transport equation for turbulent kinetic energy (the k-equation). The results show that turbulence under a plunging breaker is dominated by large-scale motions and has certain unique features that are associated with its wave condition. It was found that the nature of turbulence transport in the inner surf zone depends on a particular wave condition and it is not similar for different types of breakers. Turbulent kinetic energy is transported landward under a plunging breaker and dissipated within one wave cycle. This is different from spilling breakers where turbulent kinetic energy is transported seaward and the dissipation rate is much slower. The analysis of the k-equation shows that advective and diffusive transport of turbulence play a major role in the distribution of turbulence under a plunging breaker, while production and dissipation are not in local equilibrium but are of the same order of magnitude. Based on certain approximate analytical approaches and experimental measurements it is shown that turbulence production and viscous dissipation below trough level amount to only a small portion of the wave energy loss caused by wave breaking. It is suggested that the onshore sediment transport produced by swell waves may be tied in a direct way to the unique characteristics of turbulent flows in these waves. 相似文献
16.
Nearshore shoaling and breaking waves can drive a complex circulation system of wave-induced currents. In the cross-shore direction, the local vertical imbalance between the gradient of radiation stress and that of pressure due to the setup drives an offshore flow near the bottom, called ‘undertow’, which plays a significant role in the beach profile evolution and the structure stability in coastal regions. A 1DV undertow model was developed based on the relationship between the turbulent shear stress and t... 相似文献
17.
《Coastal Engineering》2001,42(1):53-86
A numerical model is used to simulate wave breaking, the large scale water motions and turbulence induced by the breaking process. The model consists of a free surface model using the surface markers method combined with a three-dimensional model that solves the flow equations. The turbulence is described by large eddy simulation where the larger turbulent features are simulated by solving the flow equations, and the small scale turbulence that is not resolved by the flow model is represented by a sub-grid model. A simple Smagorinsky sub-grid model has been used for the present simulations. The incoming waves are specified by a flux boundary condition. The waves are approaching in the shore-normal direction and are breaking on a plane, constant slope beach. The first few wave periods are simulated by a two-dimensional model in the vertical plane normal to the beach line. The model describes the steepening and the overturning of the wave. At a given instant, the model domain is extended to three dimensions, and the two-dimensional flow field develops spontaneously three-dimensional flow features with turbulent eddies. After a few wave periods, stationary (periodic) conditions are achieved. The surface is still specified to be uniform in the transverse (alongshore) direction, and it is only the flow field that is three-dimensional.The turbulent structures are investigated under different breaker types, spilling, weak plungers and strong plungers. The model is able to reproduce complicated flow phenomena such as obliquely descending eddies. The turbulent kinetic energy is found by averaging over the transverse direction. In spilling breakers, the turbulence is generated in a series of eddies in the shear layer under the surface roller. After the passage of the roller the turbulence spreads downwards. In the strong plunging breaker, the turbulence originates to a large degree from the topologically generated vorticity. The turbulence generated at the plunge point is almost immediately distributed over the entire water depth by large organised vortices. Away from the bed, the length scale of the turbulence (the characteristic size of the eddies resolved by the model) is similar in the horizontal and the vertical direction. It is found to be of the order one half of the water depth. 相似文献
18.
Shear stresses on a rough seabed under irregular waves plus current are calculated. Parameterized models valid for regular waves plus current have been used in Monte Carlo simulations, assuming the wave amplitudes to be Rayleigh-distributed. Numerical estimates of the probability distribution functions are presented. For waves only, the shear stress maxima follow a Weibull distribution, while for waves plus current, both the maximum and time-averaged shear stresses are well represented by a three-parameter Weibull distribution. The behaviour of the maximum shear stresses under a wide range of wave-current conditions has been investigated, and it appears that under certain conditions, the current has a significant influence on the maximum shear stresses. Results of comparison between predictions and measurements of the maximum bottom shear stresses from laboratory and field experiments are presented. 相似文献