共查询到20条相似文献，搜索用时 78 毫秒
1.
Whether the formation of the isolated sand body deposition in the forebulge area of a foreland basin system is structure- or deposition-controlled has puzzled geologists for decades, although sand body deposition is generally believed to be indicative of the position of the flexural forebulge in a foreland basin. The formation of a modern sand body in the forebulge area is thus examined by multi-scale geophysical observations based on combined reflection seismic profiles and compressed high-intensity radar pulse (CHIRP) profiles across the sand deposition along the forebulge of the Western Taiwan Foreland Basin (WTFB), which is a Late Miocene-present foreland basin in the overfilled stage. These profiles suggest that the accumulation of the sand deposits along the forebulge of the WTFB is not directly associated with forebulge faultings. The relief map of the forebulge deposit substratum shows a northwestward tilting slope, and the isopach of the forebulge sand body indicates that a large part of the sand body accumulated along the axis of the Taiwan Strait and the subdued forebulge of the WTFB. The difference between the prevailing directions of tidal currents between the Taiwan Strait and the East China Sea reflects the probable sedimentary influence of the cratonward migrating fold-thrust belt within a foreland shelf. We suggest that the formation and distribution of the sand deposits along the forebulge of the WTFB are generally controlled not only by the transverse downslope sedimentation but also longitudinal hydrodynamic processes at distal parts of the foreland basin. Our explanation provides a plausible tectono-sedimentary cause of the sand body deposition in the forebulge area in an overfilled foreland basin. The sedimentary dynamics of the sand body in the Taiwan Strait may be applicable for understanding the formation of isolated sand bodies in the distal part of the Cretaceous Western Interior Foreland Basin. 相似文献
2.
In northern Peru, the Huallaga-Moyabamba-Marañon Subandean foreland basin system results from the interaction between thin and thick-skinned tectonics. Geophysical data and the construction of two balanced cross-sections show that this structural configuration has been controlled by Permian inheritances. A fossilized west-verging Middle Permian fold and thrust belt, which developed during the Gondwanide orogeny, has been partly reactivated by the Andean compression and controlled thick-skinned tectonics propagation. This west-verging thrust system is still active and causes the crustal and damaging seismicity of the Moyabamba region. Late Permian salt, which has sealed the Middle Permian fold and thrust belt, controlled thin-skinned tectonics propagation and the development of the must large overthrust of the Peruvian Subandean zone. The fossilized and partly reactivated Middle Permian fold and thrust belt constitutes a new petroleum play for the exploration in the northern Peruvian Subandean basins. Sub-thrust traps of the Moyabamba and Huallaga wedge-top basins are particularly attractive but stay unexplored. 相似文献
3.
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt.In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N–S transect. 相似文献
4.
Continental collision between Iranian and Arabian plates resulted in the formation of the Zagros fold–thrust belt and its associated foreland basin. During convergence, pre-existing faults in the basement were reactivated and the sedimentary cover was shortened above two different types of basal decollement (viscous/frictional). This led to heterogeneous deformation which segmented not only the Zagros fold–thrust belt but also its foreland basin into different compartments resulting in variation in facies, thickness and age of the sediment infill.Based on this concept, a new tectono-sedimentary model is proposed for one of the most important syn-tectonic sedimentary unit, the Gachsaran salt in the Zagros foreland basin. In this proposed model, it is argued that differential propagation of the deformation front above decollements with different mechanical properties (viscous versus frictional) results in along-strike irregularity of the Zagros deformation front whereas movement along pre-existing basement faults leads to development of barriers across the Zagros basin. The irregularity of the deformation front and the cross-basin barriers divided the Zagros foreland basin into six almost alternating sub-basins where Gachsaran salt and its non-salt equivalents are deposited. In the salt sub-basins, two different processes were responsible for the deposition of Gachsaran salt: (1) evaporation, and (2) dissolution of extruding Hormuz salt and its re-precipitation as Gachsaran salt. Re-precipitation was probably the most significant process responsible for the huge deposit of Gachsaran salt in the extreme south-east part of the Zagros foreland basin. 相似文献
5.
Tectonics, basin subsidence mechanisms, and paleogeography of the Caribbean-South American plate boundary zone 总被引：1，自引：0，他引：1
Using a mega-regional dataset that includes over 20,000 km of on- and offshore 2D seismic lines and 12 wells, we illustrate three different stages of fault formation and basin evolution in the Caribbean arc-South American continent collisional zone. Transpressional deformation associated with oblique collision of the Caribbean arc migrates diachronously over a distance of ∼1500 km from western Venezuela in Paleogene time (∼57 Ma) to a zone of active deformation in the eastern offshore Trinidad area. Each diachronous stage of pre-, syn-, and post-collisional basin formation is accompanied by distinct patterns of fault families. We use subsidence histories from wells to link patterns of long-term basinal subsidence to periods of activity of the fault families.
Stage one of arc-continent collision
Initial collision is characterized by overthrusting of the south- and southeastward-facing Caribbean arc and forearc terranes onto the northward-subducting Mesozoic passive margin of northern South America. Northward flexure of the South American craton produces a foreland basin between the thrust front and the downward-flexed continental crust that is initially filled by clastic sediments shed both from the colliding arc and cratonic areas to the south. As the collision extends eastward towards Trinidad, this same process continues with progressively younger foreland basins formed to the east. On the overthrusting Caribbean arc and forearc terranes, north-south rifting adjacent to the collision zone initiates and is controlled by forward momentum of southward-thrusting arc terranes combined with slab pull of the underlying and subducting, north-dipping South American slab. Uplift of fold-thrust belts arc-continent suture induces rerouting of large continental drainages parallel to the collisional zone and to the axis of the foreland basins.Stage two
This late stage of arc-continent collision is characterized by termination of deformation in one segment of the fold-thrust belt as convergent deformation shifts eastward. Rebound of the collisional belt is produced as the north-dipping subducted oceanic crust breaks off from the passive margin, inducing inversion of preexisting normal faults as arc-continent convergence reaches a maximum. Strain partitioning also begins to play an important role as oblique convergence continues, accommodating deformation by the formation of parallel, strike-slip fault zones and backthrusting (southward subduction of the Caribbean plate beneath the South Caribbean deformed belt). As subsidence slows in the foreland basins, sedimentation transitions from a marine underfilled basin to an overfilled continental basin. Offshore, sedimentation is mostly marine, sourced by the collided Caribbean terranes, localized islands and carbonate deposition.Stage three
This final stage of arc-continent collision is characterized by: 1) complete slab breakoff of the northward-dipping South American slab; 2) east-west extension of the Caribbean arc as it elongates parallel to its strike forming oblique normal faults that produce deep rift and half-grabens; 3) continued strain partitioning (strike-slip faulting and folding). The subsidence pattern in the Caribbean basins is more complex than interpreted before, showing a succession of extensional and inversion events. The three tectonic stages closely control the structural styles and traps, source rock distribution, and stratigraphic traps for the abundant hydrocarbon resources of the on- and offshore areas of Venezuela and Trinidad. 相似文献6.
We present a detailed stratigraphic and structural study of the Kopeh Dagh fold-and-thrust belt in NE Iran, which is an investigation of the complex polyphased tectonic history of this belt and its links with the adjacent South Caspian Sea and Amu Darya basins. Based on numerous field surveys, a large amount of 2D and 3D seismic data, borehole data and more than 150 new biostratigaphic datings, a new detailed biostratigraphic chart and 4 main regional cross-sections illustrate the importance of lateral facies variations and structural inheritance in the present-day structure of the belt.After the Cimmerian orogeny corresponding to the closure of the Paleotethys Ocean in Late Triassic/Early Jurassic times, a Middle Jurassic post-collisional rifting event was associated with the deposition of one of the main source rocks of the Kopeh Dagh and the Amu Darya Basin (Kashafrud Formation). Following this rifting event, over 7 km of sediments were accumulated until the Tertiary above a regional post-Triassic unconformity. The occurrence of local uplifts during the Late Cretaceous-Early Paleocene is interpreted as a consequence of regional-scale modification of plate-slab coupling in the Neotethys subduction zone. The main inversion of the Kopeh Dagh occurred at Late Eocene times, when the far-field deformation developed in Eurasia as a consequence of the locking of the Neo-Tethys subduction. This folding phase is sealed in the western part of the belt by a major Eocene-Oligocene unconformity at the base of the thick sedimentary series belonging to the South Caspian Sea Basin. The bulk of sedimentary infill in the South Caspian Sea Basin is Oligocene and younger, and it is probably related to syn-compressional downward flexure of the resistant basement basin at the onset of the Alpine phase. In the eastern part of the Kopeh Dagh, this deformation is characterized by Middle Jurassic graben inversion with evidence of forced folding, short-cuts and as well by larger scale basement uplifts. In contrast, the northwestern part of the belt shows thrust faults involving basement and fault-propagation folds within the sedimentary sequence. The Kopeh Dagh presents tectonic structures that are parallel to the Paleotethys suture zone, which emphasizes the importance of the structural inheritance and inversion processes during the structural evolution of the belt. Finally, a change from a mostly dip-slip to a mostly strike-slip tectonics occurred during the Pliocene within the Kopeh Dagh as a consequence of a major tectonic reorganization in North-East Iran. 相似文献
7.
古巴三区块是2005年中国石化获得的风险勘探开发合同区块，位于墨西哥湾西南部，是古巴西部的前陆盆地之一。结合该盆地勘探现状，对相关的钻井、物探以及地球化学等资料进行石油地质综合分析，评价了该盆地的油气成藏条件及其勘探潜力，预测了有利区带。三区块主要发育上侏罗统一下白垩统的泥灰岩、泥质灰岩和中-下侏罗统泥页岩两套主要烃源岩，储层以泥晶灰岩、灰岩和砂砾岩为主，区内早期形成的圈闭在造山期基本遭到破坏，有效的圈闭主要形成于晚古近纪，圈闭类型有背斜、断鼻、断块和地层圈闭等，推测可能发育多套储盖组合。据区域对比和钻井资料分析，区内的前陆冲断带是本区最有利勘探区带，南盆地北缘发育较厚的第三系，推测是本区有利远景区。 相似文献
8.
S.Duncan Heron Jr. Thomas F. Moslow William M. Berelson John R. Herbert George A. Steele III Kenneth R. Susman 《Marine Geology》1984,60(1-4):413-434
The sedimentary record of 130 km of microtidal (0.9 m tidal range) high wave energy (1.5 m average wave height) barrier island shoreline of the Cape Lookout cuspate foreland has been evaluated through examination of 3136 m of subsurface samples from closely spaced drill holes. Holocene sedimentation and coastal evolution has been a function of five major depositional processes: (1) eustatic sea-level rise and barrier-shoreline transgression; (2) lateral tidal inlet migration and reworking of barrier island deposits; (3) shoreface sedimentation and local barrier progradation; (4) storm washover deposition with infilling of shallow lagoons; and (5) flood-tidal delta sedimentation in back-barrier environments.
Twenty-five radiocarbon dates of subsurface peat and shell material from the Cape Lookout area are the basis for a late Holocene sea-level curve. From 9000 to 4000 B.P. eustatic sea level rose rapidly, resulting in landward migration of both barrier limbs of the cuspate foreland. A decline in the rate of sea-level rise since 4000 B.P. resulted in relative shoreline stabilization and deposition of contrasting coastal sedimentary sequences. The higher energy, storm-dominated northeast barrier limb (Core and Portsmouth Banks) has migrated landward producing a transgressive sequence of coarse-grained, horizontally bedded washover sands overlying burrowed to laminated back-barrier and lagoonal silty sands. Locally, ephemeral tidal inlets have reworked the transgressive barrier sequence depositing fining-upward spit platform and channel-fill sequences of cross-bedded, pebble gravel to fine sand and shell. Shoreface sedimentation along a portion of the lower energy, northwest barrier limb (Bogue Banks) has resulted in shoreline progradation and deposition of a coarsening-up sequence of burrowed to cross-bedded and laminated, fine-grained shoreface and foreshore sands. In contrast, the adjacent barrier island (Shackleford Banks) consists almost totally of inlet-fill sediments deposited by lateral tidal inlet migration. Holocene sediments in the shallow lagoons behind the barriers are 5–8 m thick fining-up sequences of interbedded burrowed, rooted and laminated flood-tidal delta, salt marsh, and washover sands, silts and clays.
While barrier island sequences are generally 10 m in thickness, inlet-fill sequences may be as much as 25 m thick and comprise an average of 35% of the Holocene sedimentary deposits. Tidal inlet-fill, back-barrier (including flood-tidal delta) and shoreface deposits are the most highly preservable facies in the wave-dominated barrier-shoreline setting. In the Cape Lookout cuspate foreland, these three facies account for over 80% of the sedimentary deposits preserved beneath the barriers. Foreshore, spit platform and overwash facies account for the remaining 20%. 相似文献
9.
10.
11.
Mixed layer clay minerals, vitrinite reflectance and geochemical data from Rock-Eval pyrolysis were used to constrain the burial evolution of the Mesozoic–Cenozoic successions exposed at the Kuh-e-Asmari (Dezful Embayment) and Sim anticlines (Fars province) in the Zagros fold-and-thrust belt. In both areas, Late Cretaceous to Pliocene rocks, show low levels of thermal maturity in the immature stages of hydrocarbon generation and early diagenetic conditions (R0 I–S and Ro% values < 0.5). At depths of 2–4 km, Tmax values (435–450 °C) from organic-rich layers of the Sargelu, Garau and Kazhdumi source rocks in the Kuh-e-Asmari anticline indicate mid to late mature stages of hydrocarbon generation. One dimensional thermal models allowed us to define the onset of oil generation for the Middle Jurassic to Eocene source rocks and pointed out that sedimentary burial is the main factor responsible for measured levels of thermal maturity. Specifically, the Sargelu and Garau Formations entered the oil window prior to Zagros folding in Late Cretaceous times, the Kazhdumi Formation during middle Miocene (syn-folding stage), and the Pabdeh Formation in the Late Miocene–Pliocene after the Zagros folding. In the end, the present-day distribution of oil fields in the Dezful Embayment and gas fields in the Fars region is primarily controlled by lithofacies changes and organic matter preservation at the time of source rock sedimentation. Burial conditions during Zagros folding had minor to negligible influence. 相似文献
12.
The paper deals with original stratigraphic, petrographic and structural data concerning the evolution of the southern Apennines chain (Italy). The main Langhian to Pliocene deposits cropping out in the northern sector of the southern Apennines foreland basin system (Sannio-Irpinia area) have been studied and correlated in order to document the effects of tectonic changes on the evolution of sandstone detrital modes and stratigraphic architecture. The studied sandstone units can be grouped in five key intervals: a) Numidian Flysch, mostly formed by Langhian mature quartzarenitic deposits and conformable Serravallian post-Numidian successions, formed by arkosic and calciclastic arenaceous-pelitic beds (foreland depozones); b) Langhian to Tortonian San Giorgio Fm., mostly composed of quartzofeldspatic sandstones (foredeep depozone); c) Tortonian to Early Messinian, quartz-feldspatic and partly sedimentary-carbonatoclastic petrofacies, thrust-top successions (Vallone Ponticello, Villanova del Battista and San Bartolomeo fms.); d) Late Messinian quartzolithic to quartzofeldspatic sandstones (Torrente Fiumarella, Anzano Molasse and Tufo-Altavilla unit), which can be referred to infilled thrust-top basins; e) unconformity-bounded Pliocene quartzofeldspatic sandstone strata (wedge-top depozones), characterized by synsedimentary tectonic activity.Detrital modes of the Serravallian through Middle Pliocene sandstones of the southern Apennines foreland basin system testify clear provenance relations from the accreted terranes forming the southern Apennine thrust-belt. The studied clastics show almost the same blended (quartz-feldspatic) composition; this condition could be related to the tectonic transport over thrust ramp of source rocks, as suggested by the tectonic evolutionary model. This study, dealing with sedimentary provenance analysis and tectonostratigraphic evolution, provides an example of the close relations between clastic compositions and foreland basin system development in southern Apennines. 相似文献
13.
The investigation of complex geological setting is still dominated by traditional geo-data collection and analytical techniques, e.g., stratigraphic logging, dip data measurements, structural ground mapping, seismic interpretation, balance section restoration, forward modelling, etc. Despite the advantages of improving our understanding in structural geometry and fault architecture, the geospatial modelling, applying computer-aided three-dimensional geometric design, visualization and interpretation, has rarely been applied to such complex geological setting. This study used the Lenghu fold-and-thrust belt (in Qaidam basin, NE Tibetan Plateau) to demonstrate that the application of geospatial and geomechanical modelling could improve our understanding and provide an effective technique for investigating the fault architecture and strain distribution. The three-dimensional configuration of the Lenghu fold-and-thrust belt was initially derived from traditional analysis techniques, such as regional stratigraphic logging, cross section construction, meso-scale ground mapping and landsat image interpretation. The high-resolution field data and landsat image were integrated to construct the geospatial model, which was subsequently used to quantitatively investigate the fault throw changes along the Lenghu thrust fault zone and to understand its control on the lateral structural variation. The geospatial model was then restored in three dimensions to reveal the kinematic evolution of the Lenghu fold-and-thrust belt. Geomechanical modelling, using a Mass-Spring algorithm, provided an effective three-dimensional tool for structural strain analysis, which was used to predict the strain distribution throughout the overall structure, e.g., normal faults with throws ranging from meters to tens of meters in the hanging-wall. The strain distribution predicted by geomechanical modelling was then validated by the natural normal faults in the hanging-wall. The high accordance between the strain prediction and statistics of natural normal faults demonstrates good applicability of geospatial and geomechanical modelling in the complex geological setting of the Lenghu fold-and-thrust belt. The geospatial models and geomechanical models, therefore, can provide a robust technique for analyzing and interpreting multi-source data within a three-dimensional environment. We anticipate that the application of three-dimensional geospatial modelling and geomechanical modelling, integrating both multi-source geologic data and three-dimensional analytical techniques, can provide an effective workflow for investigating the fault architecture and strain distribution at different scales (e.g., ranging from regional-to meso-scale). 相似文献
14.
《Marine and Petroleum Geology》2012,38(1):195-208
Rowan et al. (2012) vehemently argue that salt tectonics is entirely driven by differential sedimentary loading and refute all the results of our work (Brun and Fort, 2011) showing that salt tectonics on passive margins is dominated by gliding, which we referred to in our paper as “dominant gliding”; in other words the deformation is controlled by salt flowing down the regional dip of these margins. We point out that “pure spreading” would be driven by differential sedimentary loading only if margins could remain strictly horizontal (i.e. not tilted), whereas “dominant gliding”, which combines spreading and gliding, affects sedimentary successions above salt layers on passive margins as soon as these are titled. Our work shows that the fundamental dynamic difference between the two processes is that in “pure spreading” salt resists deformation whereas in “dominant gliding” salt drives deformation. In “dominant gliding”, even in absence of sediments, salt flows down dip with a component of spreading, demonstrating that differential sedimentary loading is not a necessary condition of salt tectonics and that spreading – i.e. layer parallel stretching- does not require sedimentation to occur. Rowan et al. (2012) put forward arguments, related to thrust mechanics and deduced from some “pure spreading” sand and silicon box models, to backup their claims about “pure spreading” but none of them is applicable to salt basins at margin-scale. The objections made by Rowan et al. (2012) about shelf break migration and slope deformation in the Gulf of Mexico are not substantiated nor justified by verifiable and validated data. Using an adequately scaled laboratory sand-silicone box experiment, in which sedimentary progradation is oblique to silicone (salt) flow, we show that transfer zones develop with directions close to silicone (salt) flow and define patterns directly comparable to those observed in the northern Gulf of Mexico. This paper documents the results of a review of all the arguments and statements contradicting the results of our work put forward in Rowan et al. (2012), and suggests that none of them is valid. 相似文献
15.
《Marine and Petroleum Geology》2003,20(6-8):733-755
The marine fill of ancient foreland basins is primarily recorded by depositional systems consisting of facies and facies associations deposited by a variety of sediment gravity flows in shallow-marine, slope and basinal settings. Tectonism and climate were apparently the main factors controlling the sediment supply, accommodation and depositional style of these systems. In marginal deltaic systems, sedimentation is dominated by flood-generated hyperpycnal flows that build up impressive accumulations of graded sandstone beds in front of relatively small high-gradient fan-deltas and river deltas. During periods of tectonically forced lowstands of sealevel, these systems may commonly shift basinward to shelfal and slope regions. Instability along the edges of these lowstand deltas and sand-laden hyperpycnal flows generate immature and coarse-grained turbidite systems commonly confined within structural depressions and generally encased in distal delta-front and prodeltaic deposits. Because of the close vertical and lateral stratigraphic relations between deltaic and turbidite-like facies, these marginal systems are herein termed ‘mixed depositional systems’. They are very common in the fill of foreland basins and represent the natural link between deltaic and basinal turbidite sedimentation.Basinal turbidite systems form in deeper water elongate highly subsiding troughs (foredeeps) that developed in front of advancing thrust systems. The impressive volumes of sheet-sandstones that form the fill of these troughs suggest that basinal turbidite systems are likely to form following periods of dramatic tectonic uplift of adjacent orogenic wedges and related high-amplitude tectonically-forced sealevel lowstands. In such deep basinal settings, sediment flux to the sea is dramatically increased by newly formed sediment in fluvial drainage basins and the subaerial and submarine erosion of falling-sealevel deltaic deposits generated during the uplift. Turbidity currents are very likely to be mainly triggered by floods, via hyperpycnal flows and related sediment failures, but can fully develop only in large-scale erosional conduits after a phase of catastrophic acceleration and ensuing bulking produced by bed erosion. This process leads to deepening and widening of the conduits and the formation of large-volume highly efficient bipartite currents whose energy dissipation is substantially reduced by the narrow and elongate basin geometry. These currents can thus carry their sediment load over considerable distances down the basin axis. 相似文献
16.
Guillaume Backé Graham Baines David Giles Wolfgang Preiss Andrew Alesci 《Marine and Petroleum Geology》2010
The Adelaide Basin in Australia is a complex of late Neoproterozoic to Early Cambrian rift and sag basins which was inverted during the Cambro–Ordovician Delamerian Orogeny. The deposition of evaporitic sediments during the earliest stage of basin development in the late Neoproterozoic (Willouran age) played a major role in the subsequent tectonic evolution of the basin. Previous studies have shown that early mobilization, vertical transport and withdrawal of the evaporites influenced the sedimentation during the late Neoproterozoic and Early Cambrian. The evaporites also influenced deformation during the inversion of the basin and the development of the Delamerian fold and thrust belt. However, the control exerted by basement structures in the deposition of the evaporitic beds and the role of these tectonic structures in the later inversion of the basin have been poorly constrained. 相似文献
17.
Oceanology - A comparative analysis of two large Arctic sedimentary basins was performed: the Sverdrup and East Barents, with emphasis on the quantitative parameters of sedimentation in the... 相似文献
18.
Scott E. Thornton 《Geo-Marine Letters》1986,6(1):15-19
Holocene mass flow processes produce distinctive sedimentary structures in this silled, anoxic basin characterized by high
sedimentation rates of fine-grained fill. Mud flow deposits possess a 0899 1444 V
3 diagnostic vertical sequence of structures on the lower slope. Basin floor turbidites possess a variety of bed set combinations
of: 1) finely laminated layers, 2) graded silt and clay layers, and 3) ungraded, massive silts and clays with floating sand
grains. Massive, ungraded flood-derived suspensate deposits can be distinguished from turbidites. Turbidites and suspensate
deposits constitute 30% of the sampled sediment column. Varve counting of the remaining 70% provides frequencies of turbidite
and flood suspensate layer deposition. 相似文献
19.
Wonn Soh 《Progress in Oceanography》2003,57(1):109-124
Sagami Bay is a deep-water foreland basin with an average sedimentary rate of approximately 0.1 g/cm2/year. It is an appropriate area to study for better understanding of sedimentary processes in a setting with a high sedimentation rate. Seven multiple core samples, 30-50 cm thick, were obtained from Sagami Bay. Four of the core samples were taken from the Tokyo submarine fan system (Tokyo canyon floor, Tokyo fan valley and its levee, the distal fan margin). Two samples were obtained from the Sakawa fan delta and the adjacent topographic high. The remaining one was from an escarpment of the Sagami submarine fault. Variations in chemical composition can be recognized at every coring site. They show two different sediment sources: the sediments of the Tokyo submarine fan system and those from Sakawa fan delta. Further, there are differences in chemical composition between canyon floor and levees even within the Tokyo submarine fan system. The results suggest that the sedimentary process is strongly controlled not by vertical particle settling but by a hyperpycnal flow process. The proxies obtained from the core samples do not reflect conditions in the water column immediately overlying the sea floor. Rather, they are controlled by conditions on the adjacent continental shelf or/and shallow basins, which are the areas of primary accumulation. 相似文献
20.
Stphane Pochat Sbastien Castelltort Gaël Choblet Jean Van Den Driessche 《Marine and Petroleum Geology》2009,26(8):1350-1364
Growth strata are used to determine the kinematics of synsedimentary structures such as faults. Classical methods of analysis such as thickness versus throw plot consider that the available space created by fault slip in the hanging wall of faults is instantaneously filled up by sediments. This has lead many previous works to identify a cyclic activity for growth faults. Here we perform a careful analysis of the variation of strata thicknesses on each side of a very well documented normal growth fault in the Niger delta. We show that these thickness variations are induced by the alternation of sedimentary processes during continuous fault slip. Suspended-load processes induce either uniform or slightly variable thickness of a large majority of mudstone layers. Bedload processes result in a preferential thickening of sand layers in the hanging wall. These high quality data thus provide strong grounds for doubting the polycyclic growth diagnosed for some faults at the scale of sedimentary cycles and supports the notion that fault displacement rates can be very well behaved. Our study emphasizes the important conclusion that stable fault growth, and related displacement rates, can appear to be punctuated when viewed at the scale of sedimentary cycles. It follows that care should be taken when attempting to derive displacement rates on temporal scales equivalent to those of alternating sedimentological cycles. 相似文献