共查询到20条相似文献，搜索用时 125 毫秒
1.
采用黏性流体的连续性方程、雷诺时均N-S方程作为基本控制方程,RNG k-ε模型模拟湍流效应,VOF方法捕捉流体自由表面,结合主动吸收式造波理论,借助FLUENT软件建立二维不规则波数值水槽。在验证数值水槽造波性能的基础上,数值模拟带胸墙斜坡堤的越浪,并将数值计算的平均越浪量与已有物模试验值进行对比,两者趋势一致,吻合良好;表明该数值水槽模拟不规则波作用带胸墙斜坡堤越浪的准确性。针对带胸墙斜坡堤,藉此分析了堤顶超高、斜坡坡比、坡肩宽度及坡肩高度对其平均越浪量影响的规律性,研究成果对斜坡堤工程设计具有重要的参考意义。 相似文献
2.
基于计算流体力学软件的三维数值模拟技术,分析了碟形越浪式波能发电装置的越浪性能,通过构建基于水气两相VOF(Volume of Fluid)模型的三维数值波浪水槽对该装置进行三维数值模拟研究,数值计算结果与物理试验结果相互对比验证较为吻合,验证了所构建的三维数值波浪水槽的可靠性,通过考察装置的坡度、导流叶片个数、干舷高度对越浪性能的影响确定装置的最优结构参数。结果表明,在装置的斜坡面边缘增加回流板可减少波浪的反射,提高装置的越浪性能。在数值模拟中将装置的斜坡面边缘处安装回流板对碟形越浪式波能发电装置参数进行优化,通过分析回流板的长度对装置越浪性能的影响来探索最优回流板长度。 相似文献
3.
准确确定越浪量对于斜坡堤设计有重要意义。利用格子Boltzmann方法(LBM),并采用主动吸收式速度入口造波、出流边界消波、VOF方法追踪自由表面以及静态Smagorinsky模型模拟紊流运动,建立二维数值波浪水槽,对光滑斜坡堤上规则波与不规则波越浪进行数值模拟。模拟结果与试验值及其他数值模型结果比较表明,二维LBM数值波浪水槽具有模拟斜坡堤越浪的能力,但对于破碎较为剧烈的越浪过程模拟,该模型还存在一定的不足,未来可从提高自由表面模型精度等方面进一步改善其性能。 相似文献
4.
非线性波浪波面追踪的一种新模式 总被引：1，自引：0，他引：1
基于Laplace方程的Green积分表达式和波面BemouUi方程所建立的非线性波动数学模型,是一个时域上具有初始值的边值问题,而精确地追踪自由表面的波动位置,给出波面运动瞬时的波面高度和波面势函数,是建立时域内非线性波浪数值模式的基础。本文采用0-1混合型边界元剖分计算域边界并离散Laplace方程的Green积分表达式,采用有限元剖分自由水面并推导满足自由表面非线性边界条件的波面有限元方程,联立计算域内以节点波势函数和波面位置高度的时间增量为未知量的线性方程组,通过时步内的循环迭代,给出每个时步上的波面位置和波面势函数,从而建立了一种新的非线性波浪波面追踪模式。数值造波水槽内的波浪试验表明,其数值模拟结果具有良好的计算精度。 相似文献
5.
6.
7.
本文基于雷诺平均的Navier-Stokes方程和k-ε模型求解湍流流动,采用流体体积法(Volume of Fluid,VOF)追踪自由表面运动,建立无反射波浪数值水槽,对多消浪室开孔沉箱的消浪特性进行数值模拟研究。将单消浪室和多消浪室开孔沉箱反射系数和结构前波面分布的数值分析结果与物理模型试验结果进行对比验证,两者符合良好。利用数值算例,研究多消浪室开孔沉箱的反射特性以及开孔结构附近的速度场和湍流强度分布。分析结果表明:波浪与开孔沉箱相互作用时,涡旋和湍动主要分布在开孔墙和消浪室内部自由表面附近;与单消浪室开孔沉箱相比,多消浪室开孔沉箱可以更有效的耗散波浪能量,降低结构的反射系数。本文分析结果可为开孔沉箱结构的工程设计提供参考依据。 相似文献
8.
为合理确定防浪建筑物的越浪量,基于含非静水压力梯度项的非线性浅水方程建立了近岸波浪越浪数值模型。通过采用域内造波、消波并结合波前静压假定的破碎模型,模拟了规则波和不规则波在斜坡上的波浪传播变形,并在此基础上进行了越浪量数值计算。数值计算结果与物理模型实验结果表明,非静压模型可合理地描述波浪破碎点位置、破碎后的波高、增减水以及斜坡上的堤后越浪量。数值模型具有较高的计算精度和计算效率,可为实际工程防浪建筑物越浪以及堤顶高程的设计提供一种新的数值研究手段。 相似文献
9.
10.
11.
This paper presents a numerical model for simulating wave interaction with porous structures. Incompressible smoothed particle hydrodynamics in porous media (ISPHP) method is introduced in this study as a mesh free particle approach that is capable of efficiently tracking the large deformation of free surfaces in a Lagrangian coordinate system. The developed model solves two porous and pure fluid flows simultaneously by means of one equation that is equivalent to the unsteady 2D Navier–Stokes (NS) equations for the flows outside the porous media and the extended Forchheimer equation for the flows inside the porous media. Interface boundary between pure fluid and porous media is effectively modeled by the SPH integration technique. A two-step semi-implicit scheme is also used to solve the fluid pressure satisfying the fluid incompressibility criterion.The developed ISPHP model is then validated via different experimental and numerical data. Fluid flow pattern through porous dam with different porosities is studied and regular wave attenuation over porous seabed is investigated. As a practical case, wave running up and overtopping on a caisson breakwater protected by a porous armor layer are modeled. The results show good agreements between numerical and laboratory data in terms of free surface displacement, overtopping rate and pressure distribution. Based on this study, ISPHP model is an efficient method for simulating the coastal applications with porous structures. 相似文献
12.
Modified Moving Particle method in Porous media (MMPP) is introduced in this study for simulating a flow interaction with porous structures. By making use of the sub-particle scale (SPS) turbulence model, a unified set of equations are introduced for the entire computational domain and a proper boundary treatment is suggested at the interfaces between fluid and the porous media. Similar to the Incompressible Smoothed Particle Hydrodynamic (ISPH) method, a robust two-step semi-implicit scheme is utilized to satisfy the incompressibility criterion. By means of the introduced model, different flow regimes through multi-layered porous structures with arbitrary shapes can be simulated and there is no need to implement calibration factors.The developed MMPP model is then validated via simulating the experiments of Liu et al. (1999) i.e. linear and turbulent flows through porous dams and the experiments of Sakakiyama and Liu (2001) i.e. wave overtopping on a caisson breakwater protected by multi layered porous materials. Good agreements between numerical and laboratory data present the ability of the introduced model in simulating various flow regimes through multi-layered porous structures. It is concluded that the turbulent flow is an important issue particularly at the interface between the free fluid and porous media and consequently, the accuracy of the previous Lagrangian models that were based on neglecting the turbulence effect can be improved significantly by means of the present model. In addition, to satisfy the continuity criteria in the SPH models, it is necessary to modify density of particles in accordance with their porosity. 相似文献
13.
《Coastal Engineering》2006,53(9):723-735
The paper presents an incompressible Smoothed Particle Hydrodynamics (SPH) model to investigate the wave overtopping of coastal structures. The SPH method is a grid-less Lagrangian approach which is capable of tracking the large deformations of the free surface with good accuracy. The incompressible algorithm of the model is implemented by enforcing the constant particle density in the pressure projection. The SPH model is employed to reproduce a transient wave overtopping over a fixed horizontal deck and the regular/irregular waves overtopping of a sloping seawall. The computations are validated against the experimental and numerical data and a good agreement is observed. The SPH modelling is shown to provide a promising tool to predict the overtopping characteristics of different waves. The present model is expected to be of practical purpose if further improvement in the spatial resolution and CPU time can be adequately made. 相似文献
14.
《Coastal Engineering》2004,51(10):991-1020
This paper describes the capability of a numerical model named COrnell BReaking waves And Structures (COBRAS) [Lin, P., Liu, P.L.-F., 1998. A numerical study of breaking waves in the surf zone. Journal of Fluid Mechanics 359, 239–264; Liu, P.L.-F., Lin, P., Chang, K.A., Sakakiyama, T., 1999. Numerical modeling of wave interaction with porous structures. Journal of Waterway, Port, Coastal and Ocean Engineering 125, 322–330, Liu, P.L.-F., Lin, P., Hsu, T., Chang, K., Losada, I.J., Vidal, C., Sakakiyama, T., 2000. A Reynolds averaged Navier–Stokes equation model for nonlinear water wave and structure interactions. Proc. Coastal Structures '99, 169–174] based on the Reynolds Averaged Navier–Stokes (RANS) equations to simulate the most relevant hydrodynamic near-field processes that take place in the interaction between waves and low-crested breakwaters. The model considers wave reflection, transmission, overtopping and breaking due to transient nonlinear waves including turbulence in the fluid domain and in the permeable regions for any kind of geometry and number of layers. Small-scale laboratory tests were conducted in order to validate the model, with different wave conditions and breakwater configurations. In the present study, regular waves of different heights and periods impinging on a wide-crested structure are considered. Three different water depths were tested in order to examine the influence of the structure freeboard. The experimental set-up includes a flow recirculation system aimed at preventing water piling-up at the lee of the breakwater due to overtopping. The applicability and validity of the model are examined by comparing the results of the numerical computations with experimental data. The model is proved to simulate with a high degree of agreement all the studied magnitudes, free surface displacement, pressure inside the porous structure and velocity field. The results obtained show that this model represents a substantial improvement in the numerical modelling of low-crested structures (LCS) since it includes many processes neglected previously by existing models. The information provided by the model can be useful to analyse structure functionality, structure stability, scour and many other hydrodynamic processes of interest. 相似文献
15.
A smoothed particle hydrodynamic (SPH) model is developed to simulate wave interaction with porous structures. The mean flow outside the porous structures is obtained by solving Reynolds Averaged Navier–Stokes (RANS) equations and the turbulence field is calculated by a large eddy simulation (LES) model. The porous flow is described by the spatially averaged Navier–Stokes type equations with the resistance effect of the porous media being represented by an empirical frictional source term. The interface boundaries between the porous flow and the outside flow are modeled by means of specifying a transition zone along the interface. The model is validated against other available numerical results and experimental data for wave damping over porous seabed with different levels of permeability. The validated model is then employed to investigate wave breaking over a submerged porous breakwater and good agreements between the SPH model results and the experimental data are obtained in terms of free surface displacement. In addition the predicted velocity, vorticity and pressure fields near the porous breakwater and in the breaking wave zone are also analyzed. 相似文献
16.
Green water overtopping analyzed with a SPH model 总被引：3，自引：0，他引：3
Wave overtopping on the decks of offshore platforms and ships can cause severe damage due to the high forces generated by the water. This phenomenon is analyzed within the framework of the Smoothed Particle Hydrodynamics (SPH) method. The presence of a fixed horizontal deck above the mean water level modifies strongly the wave kinematics. In particular, the flow in the wave crest is split into two, showing a different behavior above and below the deck. Numerical results generated by the SPH method are compared to laboratory experiments. The formation of a jet in the rear of the deck after overtopping is observed under extreme conditions. 相似文献
17.
《Coastal Engineering》2004,51(1):1-15
The shallow water equations (SWE) have been used to model a series of experiments examining violent wave overtopping of a near-vertical sloping structure with impacting wave conditions. A finite volume scheme was used to solve the shallow water equations. A monotonic reconstruction method was applied to eliminate spurious oscillations and ensure proper treatment of bed slope terms. Both the numerical results and physical observations of the water surface closely followed the relevant Rayleigh probability distributions. However, the numerical model overestimated the wave heights and suffered from the lack of dispersion within the shallow water equations. Comparisons made on dimensionless parameters for the overtopping discharge and percentage of waves overtopping between the numerical model and the experimental observations indicated that for the lesser impacting waves, the shallow water equations perform satisfactorily and provide a good alternative to computationally more expensive methods. 相似文献
18.
Spatial distribution of random wave overtopping water behind coastal structures was investigated using a numerical model based on Reynolds-Averaged Navier-Stokes solver (RANS) and Volume of Fluid (VOF) surface capturing scheme (RANS-VOF). The computed spatial distributions of wave overtopping water behind the structure agree well with the measurements by Pullen et al (2008) for a vertical wall and Lykke Andersen and Burcharth (2006) for a 1:2 sea dike. A semi-analytical model was derived to relate spatial distribution of wave overtopping water behind coastal structures to landward ground level, velocity and layer thickness on the crest. This semi-analytical model agrees reasonably well with both numerical model results and measurements close to coastal structures. Our numerical model results suggest that the proportion of wave overtopping water passing a landward location increases with a seaward slope when it is less than 1:3 and decreases with a seaward slope when it gets steeper. The proportion of wave overtopping water passing a landward location increases with landward ground level and overtopping discharge. It also increases with the product of incident wave height and wavelength, but decreases with increasing relative structure freeboard and crest width. We also found that the extent of hazard area due to wave overtopping is significantly reduced by using a permeable structure crown. Findings in this study will enable engineers to establish the extent of hazard zones due to wave overtopping behind coastal structures. 相似文献
19.
This paper presents the application of the Improved Meshless Local Petrov Galerkin method with Rankine source (Sriram and Ma, 2012) Sriram and Ma (2012) for wave interaction with porous structure model. The mathematical model is based on a unified governing equation that incorporates both pure fluid and porous region. The porous flow model is based on the empirical resistance coefficients. The interface between the pure fluid and porous region is numerically treated using background nodes having the porosity information and interpolated over the particle using simplified finite difference interpolation method. The model is validated using the available experimental results for wave damping over the permeable bed. The developed model is used to analyse the different shape of the seawall such as flaring shaped seawall, recurve wall and vertical wall. Then the validated model is used for analysing the overtopping amount due to the effect of porous layer in-front of the different sea wall profile. Numerical expression for overtopping amount has been provided for the different configurations from the numerical model. 相似文献
20.
This paper describes the development of a numerical model for wave overtopping on seadikes. The model is based on the flux-conservative form of the nonlinear shallow water equations (NLSW) solved with a high order total variation diminishing (TVD), Roe-type scheme. The goal is to reliably predict the hydrodynamics of wave overtopping on the dike crest and along the inner slope, necessary for the breach modelling of seadikes. Besides the mean overtopping rate, the capability of simulating individual overtopping events is also required. It is shown theoretically that the effect of wave breaking through the drastic motion of surface rollers in the surfzone is not sufficiently described by the conventional nonlinear shallow water equations, neglecting wave setup from the mean water level and thus markedly reducing the model predictive capacity for wave overtopping. This is significantly improved by including an additional source term associated with the roller energy dissipation in the depth-averaged momentum equation. The developed model has been validated against four existing laboratory datasets of wave overtopping on dikes. The first two sets are to validate the roller term performance in improving the model prediction of wave overtopping of breaking waves. The last two sets are to test the model performance under more complex but realistic hydraulic and slope geometric conditions. The results confirm the merit of the supplemented roller term and also demonstrate that the model is robust and reliable for the prediction of wave overtopping on seadikes. 相似文献