共查询到20条相似文献，搜索用时 468 毫秒
1.
As a popular solution for mooring an FPSO （Floating Production, Storage and Offloading） permanently in shallow water, the soft yoke mooring system has been widely used in ocean oil production activities in the Bohai Bay of China. In order to simulate the interaction mechanism and conduct dynamic analysis of the soft yoke mooring system, a theoretical model with basic dynamic equations is established. A numerical iteration algorithm based on error estimation is developed to solve the equations and calculate the dynanfic response of the mooring system due to FPSO motions. Validation is conducted by wave basin experimentation. It is shown that the numerical simulation takes only a few iteration times and the final errors are small. Furthermore, the calculated results of both the static and dynamic responses agree well with those ones obtained by the model test. It indicates that the efficiency, the precision, the reliability and the validity of the developed numerical algorithm and program are rather good. It is proposed to develop a real-time monitoring system to further monitor the dynamic performance of the FPSO with a soft yoke mooring system under various real sea environments. 相似文献
2.
Qiao Dong-sheng Yin Li Yan Jun Tang Wei Ning De-zhi Li Bin-bin Ou Jin-ping 《中国海洋工程》2021,35(5):700-711
The maximum predicting error of the commonly used passive truncated mooring system method may reach 30% due to the difference of dynamic characteristics between the truncated and full-depth mooring line. In this paper, the experimental strategy called three-parameter (displacement, velocity and acceleration) active control method at the truncated point of mooring line is established to implement the synchronous equivalent of motion and force, and the realization of active truncated mooring system for model test is studied theoretically. The influences of three-parameter and one-parameter (displacement) active control strategies on the compensation effects are compared by numerical study. The results show that the established three-parameter active control method can feasibly realize the static and dynamic equivalent of truncated and full-depth mooring system, laying a good foundation for the following physical model test of active truncated mooring system.
相似文献3.
Yoji Ogawa 《Applied Ocean Research》1984,6(3):140-147
The integrated equations of deep sea mooring lines in static equilibrium under consideration of gravity force and line elongation are obtained. The most useful forms of the equations for designing deep sea mooring system are those in which horizontal displacement and horizontal and vertical components of tension are obtained as functions of line length, water depth, critical tension and unit weight of line.When the dynamic simulation of a buoy system is carried out, line tensions acting on the buoy should be represented as a linear function of displacement. Therefore the linearisation method is introduced by use of linearisation coefficient matrix. Translation formulae for the matrix from two to three dimensions is also presented.The influence of line elongation on the horizontal component of tension in a taut mooring condition is important, therefore the elongation of stretched deep sea mooring line must be considered carefully. Also, the scaling law under consideration of line elongation in static equilibrium, which is necessary in estimation from a small sized experiment, is discussed. 相似文献
4.
Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line
The real-time computer-controlled actuators are used to connect the truncated parts of moorings and risers in the active hybrid model testing system. This must be able to work in model-scale real time, based on feedback input from the floater motions. Thus, mooring line dynamics and damping effects are artificially simulated in real time, based on a computer-based model of the problem. In consideration of the nonlinear characteristics of the sea platform catenary mooring line, the equations of the mooring line motion are formulated by using the lumped-mass method and the dynamic response of several points on the mooring line is investigated by the time and frequency domain analysis method. The dynamic response of the representative point on the mooring line is analyzed under the condition of two different corresponding upper endpoint movements namely sine wave excitation and random wave excitation. The corresponding laws of the dynamic response between the equivalent water depth truncated points at different locations and the upper endpoint are obtained, which can provide technical support for further study of the active hybrid model test. 相似文献
5.
1 .ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎａｔａｎｋｅｒｉｓｂｅｒｔｈｅｄｏｒｍｏｏｒｅｄｔｏａｎｏｃｅａｎｐｌａｔｆｏｒｍ ,ｗｈｉｃｈｉｓｕｓｕａｌｌｙｉｎｏｐｅｎｓｅａｓ,ｔｈｅｔａｎｋｅｒｗｉｌｌｓｕｆｆｅｒｆｏｒｃｅｓｇｅｎｅｒａｔｅｄｂｙｗａｖｅｓ ,ｗｉｎｄａｎｄｃｕｒｒｅｎｔ.Ｉｎｍｏｓｔｏｆｔｈｅｐｒｅｖｉｏｕｓｓｔｕｄｉｅｓ ,ｔｈｅｉｎ ｆｌｕｅｎｃｅｏｆｃｕｒｒｅｎｔｏｒｔｈｅｃｏｍｂｉｎｅｄｗａｖｅａｎｄｃｕｒｒｅｎｔｗａｓｃｏｎｓｉｄｅｒｅｄｔｏｂｅｔｈｅｍａｉｎｏｂｊｅｃｔ.Ｉｎｓ… 相似文献
6.
《Oceanic Engineering, IEEE Journal of》2009,34(4):548-558
7.
This paper presents a new procedure for the optimization of the mooring design of floating platforms, in which an automatic design sequence is also established. Regarding the optimization philosophy, the following aspects are dealt with:
- • The optimization of the platform heading and its mooring pattern, taking into account the environmental force spreading;
- • optimum line length or line tension for each mooring line, associated to the optimization of the mooring line materials and sizes.
8.
Effect of Failure Mode of Taut Mooring System on the Dynamic Response of A Semi-Submersible Platform
Mooring system failure can lead to largely different dynamic response of floating structures when compared to the response under the condition of intact mooring system. For a semi-submersible platform with taut mooring system under extreme environmental conditions, the typical mooring system failure includes anchor line breaking failure due to the broken anchor line, and the anchor dragging failure caused by the anchor failure in the seabed soil due to the shortage of the anchor bearing capacity. However, study on the mooring failure caused by anchor failure is rare. The current work investigates the effect of three failure modes of taut mooring system on dynamic response of a semi-submersible platform, including one line breaking failure, two lines breaking failure, and one line breaking with one line attached anchor dragging failure. The nonlinear polynomial mooring line model in AQWA was used with integrating the load and displacement curve from the anchor pulling study to characterize the anchor dragging behavior for mooring system failure caused by the anchor failure. The offsets of the platform and the tension of mooring lines were analyzed for mooring system failure with 100-year return period. It is found that the mooring failure of one line breaking with one line attached anchor dragging is a case between the other two mooring failures. The traditional mooring analysis considering only the damaged condition with one line breaking is not safe enough. And the simple way of mooring analysis of two lines breaking is too conservative for the costly offshore engineering.
相似文献9.
This study describes an automatic berthing system with mooring lines. It is designed to be berthed by using mooring device on the upper deck of a ship. It is to berth once maintaining parallel with the quay by controlling both forward and aft breast lines. Berthing method is used through length adjustment of mooring lines connected between ship and quay by controlling the angular velocity and the torque of hydraulic motor in mooring device. The study is conducted under three changing conditions of draft, such as even-keel, rise of the gravity center and trim to stern. Variables affecting berthing stability are determined based on the control performance of each condition. Bond graphs method is used to model the system. Controller is designed as PID control method of reference-model algorithm. The control program is composed of synchronous control system based on the equations derived with the numerical analysis. The tank test is conducted to verify the usefulness of the control program. 相似文献
10.
软刚臂系泊系统是一种利用压载质量为浮式生产储油装置(FPSO)提供回复力的单点系泊方式。为快速准确地评估多铰接组成的软刚臂系统的受力状态,避免应用高复杂度的有限元软件,进而快速完成优化设计等任务,建立一种静力计算方法十分有必要。因此,针对由刚臂(YOKE)、柔性系泊腿和压载舱组成的刚柔多体系统,以分解组合的方式,提出一种二维静力计算方法,用以研究FPSO软刚臂系泊系统的静力特性。该方法主要依靠软刚臂的几何构型,在有限铰接约束下,形成非线性静力平衡方程,建立了压载舱式水上软刚臂单点系泊系统二维静力平衡计算算法。采用OrcaFlex、SESAM等软件开展了理论和数值对比分析,同时与系泊试验结果开展验证分析。对比结果表明,文中所提方法计算精度较高,可为软刚臂单点系泊系统的研究提供可靠支持。 相似文献
11.
The key consideration in controlling the dynamic response of an offshore guyed tower subjected to environmental loading is the selection of the stiffness characteristics of the cable mooring array. In the present study, each cable in the array consists of three segments: a leading segment attached to the tower, a short heavy middle segment, and a seabed trailing segment attached at the extremity to an anchor pile. A nonlinear static model is presented in algorithmic form that defines the stiffness characteristics of the cable array. The model involves the inelastic static catenary equations coupled with conditions of geometric compatibility, formulated in terms of seven nondimensional system parameters. The effects of varying each of the system parameters on the stiffness characteristics of example cable arrays are presented and the implications for cable design are discussed. 相似文献
12.
The present work reports a Hybrid Modular Floating Structure (HMFS) system with typical malfunction conditions. The effects of both fractured mooring lines and failed connectors on main hydrodynamic responses (mooring line tensions, module motions, connector loads and wave power production) of the HMFS system under typical sea conditions are comparatively investigated. The results indicate that the mooring tension distribution, certain module motions (surge, sway and yaw) and connector loads (Mz) are significantly influenced by mooring line fractures. The adjacent mooring line of the fractured line on the upstream side suffers the largest tension among the remaining mooring lines, and the case with two fractured mooring lines in the same group on the upstream side is the most dangerous among all cases of two-line failures in view of mooring line tensions, module motions and connector loads. Therefore, one emergency strategy with appropriate relaxation of a proper mooring line has been proposed and proved effective to reduce the risk of more progressive mooring line fractures. In addition, connector failures substantially affect certain module motions (heave and pitch), certain connector loads (Fz and My) and wave power production. The present work can be helpful and instructive for studies on malfunction conditions of modular floating structure (MFS) systems.
相似文献13.
Zhang Zijun Zhang Zushu
Lecture Huazhong University of Science Technology Wuhan . Professor Huazhong University of Science Technology Wuhan 《中国海洋工程》1994,(1)
- In this paper a series of model experiments of resistance on buoys and mooring system components are described. The experiments include: experiments of hydrodynamic resistance on buoys and mooring system components, and experiment of air resistance on buoys in wind tunnel. The results are compared with the Beto's results (1980) and some analyses are conducted. The experimental results provide a reliable basis and some parameters for the design of deep sea mooring systems. 相似文献
14.
The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab 相似文献
15.
In this paper, a methodology for designing mooring system deployment for vessels at varying water depths is proposed. The Non-dominated Sorting Genetic Algorithm-II(NSGA-II) is combined with a self-dependently developed vessel-mooring coupled program to find the optimal mooring system deployment considering both station-keeping requirements and the safety of the mooring system. Two case studies are presented to demonstrate the methodology by designing the mooring system deployments for a very large floating structure(VLFS) module and a semi-submersible platform respectively at three different water depths. It can be concluded from the obtained results that the mooring system can achieve a better station-keeping ability with relatively shorter mooring line when deployed in the shallow water. The safety factor of mooring line is mainly dominated by the maximum instantaneous tension increment in the shallow water, while the pre-tension has a decisive influence on the safety factor of the mooring line in the deep water. 相似文献
16.
《中国海洋工程》2020,(4)
The study of mooring forces is an important issue in marine engineering and offshore structures. Although being widely applied in mooring system, numerical simulations suffer from difficulties in their multivariate and nonlinear modeling. Data-driven model is employed in this paper to predict the mooring forces in different lines, which is a new attempt to study the mooring forces. The height and period of regular wave, length of berth, ship load, draft and rolling period are considered as potential influencing factors. Input variables are determined using mutual information(MI) and principal component analysis(PCA), and imported to an artificial neural network(NN) model for prediction. With study case of 200 and 300 thousand tons ships experimental data obtained in Dalian University of Technology, MI is found to be more appropriate to provide effective input variables than PCA. Although the three factors regarding ship characteristics are highly correlated, it is recommended to input all of them to the NN model.The accuracy of predicting aft spring line force attains as high as 91.2%. The present paper demonstrates the feasibility of MI-NN model in mapping the mooring forces and their influencing factors. 相似文献
17.
The experimental and theoretical investigations on the behaviour of pontoon-type floating breakwaters are presented. A two-dimensional finite element model is adopted to study the behaviour of pontoon-type floating breakwaters in beam waves. The stiffness coefficients of the slack mooring lines are idealized as the linear stiffness coefficients, which can be derived from the basic catenary equations of the cable. The theoretical model is supported by an experimental programme conducted in a wave flume. The motion responses and mooring forces are measured for three different mooring configurations, and the results are reported and discussed in detail in this paper. The wave attenuation characteristics are presented for the configurations studied. 相似文献
18.
Ma Peisun Ma Lie Lu Shunshou Associate Professor Shanghai Jiaotong University Shanghai Graduate Shanghai Jiaotong University Shanghai Engineer Shanghai Jiaotong University Shanghai 《中国海洋工程》1991,(4)
To fulfil the need of development of offshore oil floating production system, the performance of turret assembly in an inboard turret mooring system has been investigated in the paper. By means of systematic evaluation, the optimal structure of the turret for single-point mooring systems has been determined. Through model tests of a turret mooring system, several groups of data such as forces, moments and displacements under different environmental conditions have been obtained. Stresses and strains of the turret structure have been calculated by means of the finite element method corresponding to the situation in the model experiment. The study shows that the selected turret structure and the designed turret assembly are technically feasible. 相似文献
19.
The coupled hull, mooring and riser analysis techniques in time domain are widely recognized as the unique approach to predict the accurate global motions. However, these complex issues have not been perfectly solved due to a large number of nonlinear factors, e.g. forces nonlinearity, mooring nonlinearity, motion nonlinearity and so on. This paper investigates the coupled effects through the numerical uncoupled model, mooring coupled model and fully coupled model accounting mooring and risers based on a novel deep draft multi-spar which is especially designed for deepwater in 2009. The numerical static-offset, free-decay, wind-action tests are executed, and finally the three hours simulations are conducted under 100-year return period of GOM conditions involving wave, wind and current actions. The damping contributions, response characteristics and mooring line tensions are emphatically studied. 相似文献
20.
《中国海洋工程》1998,(1)
A quasi-steady time domain method is developed for the prediction of dynamic behavior of amooring system under the environmental disturbances,such as regular or irregular waves,winds and cur-rents.The mooring forces are obtained in a static sense at each instant.The dynamic feature of the moor-ing cables can be obtained by incorporating the extended 3-D lumped-mass method with the known shipmotion history.Some nonlinear effects,such as the influence of the instantaneous change of the wettedhull surface on the hydrostatic restoring forces and Froude-Krylov forces,are included.Thecomputational results show a satisfactory agreement with the experimental ones. 相似文献