共查询到17条相似文献，搜索用时 390 毫秒
1.
2.
3.
4.
为研究深海海底沉积物声学特性与物理性质相关关系,于2016年11月在实验室对水深3164～5 592 m的菲律宾海深海海底沉积物柱状样品的声学特性进行测量,获取了沉积物声速、声速比、声阻抗、声阻抗指数等声学特性参数。结合沉积物的孔隙度和密度等物理性质参数,分析了海底沉积物声速、声速比、声阻抗、声阻抗指数与孔隙度、密度的相关关系,建立了该海域海底沉积物声学特性回归方程。研究结果表明:研究区深海数据与浅海回归方程符合度较差,与深海回归方程符合度较好;Hamilton校正方法有助于修正实验室测量引起的温度和压力误差,声速比与Hamilton方程符合度比声速好;声阻抗和声阻抗指数与物理性质参数的相关性优于声速和声速比。此外,研究认为由于海底沉积物的沉积环境较为复杂,其声学特性回归方程存在差异。由于上述差异的存在,在使用基于不同海域数据建立的回归方程进行海底沉积物声学特性预测时,应加以区别对待。该研究丰富了深海海底沉积物声学数据,对促进深海海底沉积物声学深入研究具有一定的借鉴意义。 相似文献
5.
海底表层沉积物具有多相、多颗粒、多形态的组成结构，导致其声学特性复杂多样。通过分析压缩波速度和切变波速度特性的研究现状，指出有待于解决的科学问题和关键技术问题。在分析国内外有关海底沉积层声速特性研究基础上，提出采取系统、可控的实验测量手段解决当前测量存在的4点问题。综合分析了压缩波速度和切变波速度存在的统计回归关系和理论分析关系，探讨了当前地声反演、采样样品声学测量、原位声学测量3种方法存在的测量尺度、测量频率、测量状态等的差异，探讨建立不同测量方法和测量技术对测量结果进行统一性解释的方法，从而获得不同类型、不同区域的海底表层沉积物真实的声速特性。最后，从实验室声学测量、物理力学参数测量、流固耦合特性分析、原位测量及海底监测、采样测量与原位测量的误差分析及校正、海底大纵深声学测量6个方面提出技术需求，为提高声学探测海洋和海底的精度服务，推动海洋声学探测和海洋工程发展。 相似文献
6.
7.
8.
9.
10.
海底沉积物的声学测量是海底测深的关键技术之一,应用于海底地形地貌测量、海洋矿产资源开采和海底工程建设等。海底沉积物声学测量方法中的原位测量方法可以避免保真采样法的强扰动性和遥测法的准确度、精度及灵敏度的不确定性等缺点,如何改进原位测量系统渐成为海底探测的研究热点。通过分析现有海底沉积物原位测量设备测试换能器的工作原理,针对垂直压入方式换能器测量深度有限,提出了一种通过改变换能器压入沉积物的角度来增加测量深度的方法。在理论上论证出在不低于换能器接收阈值时,测量深度随着掠射角的增加而增加。在不增加压入深度的前提下提供了一种增加测量深度方法。 相似文献
11.
Lei Sun Xiangmei Meng Guanbao Li Guangming Kan Baohua Liu 《Marine Georesources & Geotechnology》2020,38(5):595-603
AbstractThe high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range. 相似文献
12.
为准确建立海底地声模型,本文探讨地声模型的基本组成和基本结构。通过样品实验室测量,分析南海海底表层沉积物的密度、孔隙度与声速随着埋深变化的关系,得出海底实际存在的低声速表面–声速缓慢变化类型、低声速表面–声速增大类型、高声速表面–声速缓慢变化类型和高声速表面–声速增大类型4种典型地声结构;对比钻探测量,分析黄海海底沉积物的密度、孔隙度与声速随埋深变化关系,得出海底地声模型分层特征与地声结构组合特征。研究表明,地声模型可以归结为4种基本地声结构的组合,通过与底层海水声速、同层内声速剖面以及与上层海底沉积物下表面声速的比较,可以建立各种海底地声模型;基于实验室测量法建立的地声模型可以作为参考地声模型,但需要考虑实际海底温度和压力梯度以及海底沉积物的频散特性等,借助于声速比校正法和频散性理论模型进行计算及修正。 相似文献
13.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。 相似文献
14.
Liang Yuanbo Lu Bo Huang Shaojian Li Tinghuan Yang Weiguang Wen Yaolin 《Marine Georesources & Geotechnology》2013,31(3-4):189-201
Abstract The possibility of seafloor failure under external loadings on a gently sloping continental shelf is controlled, to a large extent, by the geotechnical characters of subbottom sediments (e.g., shear strength, compressibility, and liquefaction potential) and structural factors (e.g., sedimentary stratification). By means of undis‐turbing coring, in‐situ acoustic measurement, and subbottom profiling, the authors conducted an investigation into the seafloor instabilities and possibilities of sediment slope failure within the continental shelf off the Pearl River mouth, which is one of the most important areas for offshore development in the northern South China Sea. Based on in‐situ and laboratory measurements and tests for sediment physical properties, static and dynamic behavior, and acoustic characteristics, the analyses indicate: (1) subbottom sediments that originated from terrigenous clay during the Pleistocene are compact and overconsolidated, and the mean sound velocity in such sediments is relatively high; (2) the maximum vertical bearing capacity of subbottom sediments is efficiently conservative on the safe side for dead loads of light structures, and the trench walls are stable enough while trenching to a depth of about 2 m below the seafloor under still water; and (3) it is quite improbable that the subbottom sediments liquefy under earthquake (M ≤ 6) or storm wave loading. 相似文献
15.
中国东南近海海底沉积物声学物理性质及其相关关系 总被引：17，自引：3，他引：17
在获得的数据资料基础上,发现了中国东南近海海底沉积物声学物理参数的平面分布规律,通过对这些参数的回归分析以及对声速和沉积物密度的估计,建立了经验公式。结果显示,中国东南近海海底沉积物的基本声学物理特性如下:沉积物类型多样而且复杂,从黏土到砂砾有13个颗粒组分组合;沉积物物理力学参数变化范围较大;沉积物声学性质相对于附近海域的数据变化范围更大。这些都与海底沉积环境、沉积物来源、沉积条件和沉积作用过程有关。该项研究有助于建立海底地声模型及开展应用。 相似文献
16.
原位测量技术在黄海沉积声学调查中的应用 总被引：8，自引：3，他引：8
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。 相似文献
17.
The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment sound velocity is one of the main parameters. On seven sediment cores collected from the Bering Sea and Chukchi Sea during the 5th Chinese National Arctic Research Expedition, sound velocity measurements were made at 35, 50, 100, 135, 150, 174, 200, and 250 k Hz using eight separate pairs of ultrasonic transducers. The measured sound velocities range from 1 425.1 m/s to 1 606.4 m/s and are dispersive with the degrees of dispersion from 2.2% to 4.0% over a frequency range of 35–250 k Hz. After the sound velocity measurements, the measurements of selected geotechnical properties and the Scanning Electron Microscopic observation of microstructure were also made on the sediment cores. The results show that the seafloor sediments are composed of silty sand, sandy silt, coarse silt, clayey silt, sand-silt-clay and silty clay. Aggregate and diatom debris is found in the seafloor sediments. Through comparative analysis of microphotographs and geotechnical properties, it is assumed that the large pore spaces between aggregates and the intraparticulate porosity of diatom debris increase the porosity of the seafloor sediments, and affect other geotechnical properties. The correlation analysis of sound velocity and geotechnical properties shows that the correlation of sound velocity with porosity and wet bulk density is extreme significant, while the correlation of sound velocity with clay content, mean grain size and organic content is not significant. The regression equations between porosity, wet bulk density and sound velocity based on best-fit polynomial are given. 相似文献