共查询到17条相似文献，搜索用时 156 毫秒
1.
2.
3.
4.
5.
准确确定越浪量对于斜坡堤设计有重要意义。利用格子Boltzmann方法(LBM),并采用主动吸收式速度入口造波、出流边界消波、VOF方法追踪自由表面以及静态Smagorinsky模型模拟紊流运动,建立二维数值波浪水槽,对光滑斜坡堤上规则波与不规则波越浪进行数值模拟。模拟结果与试验值及其他数值模型结果比较表明,二维LBM数值波浪水槽具有模拟斜坡堤越浪的能力,但对于破碎较为剧烈的越浪过程模拟,该模型还存在一定的不足,未来可从提高自由表面模型精度等方面进一步改善其性能。 相似文献
6.
7.
8.
本文试验研究了规则波在斜坡式和直墙式堤上的越波量,给出了无因次越波量随堤顶相对高度和堤坡变化的计算公式,同时计及堤前相对水深、波陡和波浪破碎的影响,为研究不规则波的越波量进而按最大允许越波量设计海堤顶高创造条件。 相似文献
9.
为合理确定防浪建筑物的越浪量,基于含非静水压力梯度项的非线性浅水方程建立了近岸波浪越浪数值模型。通过采用域内造波、消波并结合波前静压假定的破碎模型,模拟了规则波和不规则波在斜坡上的波浪传播变形,并在此基础上进行了越浪量数值计算。数值计算结果与物理模型实验结果表明,非静压模型可合理地描述波浪破碎点位置、破碎后的波高、增减水以及斜坡上的堤后越浪量。数值模型具有较高的计算精度和计算效率,可为实际工程防浪建筑物越浪以及堤顶高程的设计提供一种新的数值研究手段。 相似文献
10.
11.
Dike resilience against wave overtopping has gained more and more attention in recent years due to the effect of expected future climate changes. The overtopping flow velocities and flow depths on dikes have recently been studied in 2D small-scale experiments. This has led to semi-empirical formulae for the estimation of flow depths and flow velocities across a dike. The results have been coupled to the actual erosion of the landward dike slope determined by full-scale 2D tests using the so-called “Overtopping Simulator”. This paper describes the results from 96 small-scale tests carried out in a shallow water basin at Aalborg University to cover the so far unknown 3D effects from oblique long-crested and short-crested waves. Based on results from the laboratory tests, expansions are proposed to the existing 2D formulae so as to cover oblique and short-crested waves. The wave obliquity is seen to significantly reduce the overtopping flow velocities and flow depths on especially the landward slope of a sea dike. Moreover, the tests showed that the average flow directions on the dike crest from oblique long-crested and short-crested waves correspond approximately to the incident wave direction. Flow depths and the squared flow velocities on the dike are concluded to be Rayleigh-distributed in case of both long-crested and short-crested waves for all considered incident wave obliquities. Findings in the present paper are needed to obtain more realistic estimates of dike erosion caused by wave overtopping. 相似文献
12.
To study the influence of wave obliquity and directional spreading on wave overtopping of rubble mound breakwaters a total of 736 three-dimensional model tests were carried out at Aalborg University. The results of these tests are presented and analysed in this paper yielding a new empirical reduction factor to describe the influence of wave obliquity and directional spreading on the average wave overtopping discharges. The study shows that perpendicularly incident, long-crested waves result in conservative values of the overtopping discharge for the tested cross-section. 相似文献
13.
Wang Jianyi Senior Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1992,(1)
This paper describes the design of a perforated caisson breakwater and presents the results of model test. Tests with regular and irregular waves have demonstrated that the perforated caisson breakwater has the advantages of low reflection coefficient, good wave-absorbing performance, relatively small wave height in front of the breakwater, and small amount of overtopping. Analyses have been made of the coefficient of reflection, wave height in front of the breakwater, and wave overtopping. Relevant figures and tables are presented for reference. 相似文献
14.
In this study we investigate how the wave energy deficit in the lee of an array of overtopping type wave energy converting devices (WECs), redistributes with distance from the array due to the natural variability of the wave climate and wave structure interactions. Wave directional spreading has previously been identified as the dominant mechanism that disperses the wave energy deficit, reducing the maximum wave height reduction with increasing distance from the array. In addition to this when waves pass by objects such as an overtopping type WEC device, diffracted waves re-distribute the incident wave energy and create a complex interference pattern. The effect of wave energy redistribution from diffraction on the wave energy shadow in the near and far field is less obvious. In this study, we present an approximate analytical solution that describes the diffracted and transmitted wave field about a single row array of overtopping type WECs, under random wave conditions. This is achieved with multiple superpositions of the analytical solutions for monochromatic unidirectional waves about a semi-infinite breakwater, extended to account for partial reflection and transmission. The solution is used to investigate the sensitivity of the far field wave energy shadow to the array configuration, level of energy extraction, incident wave climate, and diffraction. Our results suggest that diffraction spreads part of the wave energy passing through the array, away from the direct shadow region of the array. This, in part, counteracts the dispersion of the wave energy deficit from directional spreading. 相似文献
15.
斜向波浪作用下双层水平板式防波堤波浪荷载试验研究 总被引：1，自引：0，他引：1
In this study, systematic physical model tests were performed to investigate the wave forces on the twin-plate breakwater under irregular waves. Based on the experimental results, the effects of the relative plate width B/L,wave height Hs/D and incident angle θ0 on the wave forces were analyzed and discussed. The results showed that:(1) The envelopes of the total wave pressure were generally symmetrical along the direction of plate width under the incident angles(θ0) being 0°, 15°, 30°, 45° and 60°. In particular, the envelopes of wave pressure atθ0=30° were larger than all other cases.(2) The synchronous pressure distribution of the breakwater under oblique wave action was more complicated comparing to the normal incident waves.(3) Based on data analysis, an empirical formula was obtained to estimate the total vertical force of the twin-plate breakwater.This empirical formula can be a good reference for the design basis of engineering applications under specified wave conditions. 相似文献
16.
《中国海洋工程》2021,(4)
The main objective of this paper is to examine the influences of both the principal wave direction and the directional spreading parameter of the wave energy on the wave height evolution of multidirectional irregular waves over an impermeable sloping bottom and to propose an improved wave height distribution model based on an existing classical formula. The numerical model FUNWAVE 2.0, based on a fully nonlinear Boussinesq equation, is employed to simulate the propagation of multidirectional irregular waves over the sloping bottom. Comparisons of wave heights derived from wave trains with various principal wave directions and different directional spreading parameters are conducted. Results show that both the principal wave direction and the wave directional spread have significant influences on the wave height evolution on a varying coastal topography. The shoaling effect for the wave height is obviously weakened with the increase of the principal wave direction and with the decrease of the directional spreading parameter. With the simulated data, the classical Klopman wave height distribution model is improved by considering the influences of both factors. It is found that the improved model performs better in describing the wave height distribution for the multidirectional irregular waves in shallow water. 相似文献
17.
A one-dimensional high-resolution finite volume model capable of simulating storm waves propagating in the coastal surf zone and overtopping a sea wall is presented. The model (AMAZON) is based on solving the non-linear shallow water (NLSW) equations. A modern upwind scheme of the Godunov-type using an HLL approximate Riemann solver is described which captures bore waves in both transcritical and supercritical flows. By employing a finite volume formulation, the method can be implemented on an irregular, structured, boundary-fitted computational mesh. The use of the NLSW equations to model wave overtopping is computationally efficient and practically flexible, though the detailed structure of wave breaking is of course ignored. It is shown that wave overtopping at a vertical wall may also be approximately modelled by representing the wall as a steep bed slope. The AMAZON model solutions have been compared with analytical solutions and laboratory data for wave overtopping at sloping and vertical seawalls and good agreement has been found. The model requires more verification tests for irregular waves before its application as a generic design tool. 相似文献