共查询到20条相似文献，搜索用时 62 毫秒
1.
《中国海洋大学学报(自然科学版)》2021,(10)
近海滑坡发生后,流滑体冲击海底以上的桩身,威胁桩基和上部结构安全。将流滑体视为非牛顿流体,依照幂律模型描述流滑体剪应力和应变速率之间的关系。采用商业软件Fluent模拟滑坡冲击单桩过程,在变动参数分析的基础上,探索流滑体密度、粘度和冲击速度以及桩体直径对稳态冲击压力的影响。建立了包含拖曳力项和承载力项的冲击压力归一化表达式,尤其适合预测低速滑坡对桩体的冲击。 相似文献
2.
3.
海底滑坡是一种由于重力失稳导致的广泛发生在外陆架-上陆坡-深海平原的沉积物搬运体，是海底沉积物重要的搬运过程，具有较强的侵蚀能力和搬运能力，可将大量陆架沉积物搬运至深海，为深海带来丰富的沉积物。再沉积后的滑坡体因其特殊的内部结构，对海洋油气成藏有重要影响。综合国内外研究，对海底滑坡空间展布特征和垂向结构特征进行总结，对滑坡体岩石物理特征进行梳理，揭示海底滑坡边界特征、内部结构以及岩石物理特征。结合海底滑坡特征，从提供物源、储层、盖层、改变海底温压等方面分析海底滑坡对海底油气藏的积极意义，从破坏盖层、改变海底土体温压环境等方面分析海底滑坡对海底油气藏的负面影响。最后结合国内外研究现状，指出未来应对海底滑坡微尺度特征识别、进一步开展海底滑坡与海底油气藏联系以及加强海洋油气开发致灾风险等方面进行深入研究。 相似文献
4.
5.
东北法罗大陆边缘的高分辨率地震剖面显示中部和下部陆坡有大规模的滑塌和滑坡,它们对中新世,上新世和第四系的沉积产生一定的影响。上陆坡的重力流积有一部分被较新的沉积物所覆盖,据推测较新的沉积为等深流沉积。ＴＯＢＩ深海拖曳旁侧声级及深潜透声显示,上陆坡的滑塌复合体包手隐伏的滑动岩面,瓶颈滑坡,泥石流舌状体和一系列浅层滑坡。发生在中部和下部陆坡的滑坡似乎时代较新,显示为一形状不规则的陡立主滑动岩面和大型完 相似文献
6.
海底滑坡作为常见的海洋地质灾害,对海洋油气工程安全产生巨大威胁。海床土体失稳引起滑坡体滑动,会对海底管道产生拖曳作用。基于计算流体动力学方法(CFD)建立海底滑坡体对管道作用的评估模型,采用H-B模型描述块状滑坡体并与试验比较验证,分析不同海床倾斜度滑坡对管道的作用并拟合表达式;研究了海底管道在滑坡作用下的力学响应,并采用极限状态方法开展海底滑坡作用下管道结构极限安全分析,探讨了管道埋地状态时的极限安全界限,建立滑坡作用下管道结构安全分析方法。研究表明:滑坡对管道作用力与海床倾角呈现正相关,而覆土层厚度对作用力影响较小;随着不排水抗剪强度的减小,允许的滑坡宽度和速度均增加,表明土体不排水抗剪强度与引起的拖曳力呈正相关;滑坡土体宽度对极限安全速度影响较大。 相似文献
7.
针对深入了解深海海底界面的物理、化学和生物动态变化过程及机制的观测需求,综述了自主式海底观测站(着陆器,lander)在深海海底溶质通量监测的研究进展。探讨了海底观测站的设计与实施技术,分析总结了深海自主式原位观测站在沉积物-水界面化学组分通量的观测机理,讨论了自主式海底观测站的国内外发展现状。自主式海底观测站具有可灵活机动选择观测地点、操作简单、便于多参数综合测量的特点,为获取深海海底长时空尺度综合参数资料提供了有效的技术支撑。根据目前深海生物地球化学循环研究特点,提出了自主式海底观测站面临的问题与发展建议。 相似文献
8.
为了研究海底滑坡对海洋单桩的冲击力大小,首先通过调整高岭土、粉砂的不同含量,得到不同流变特性、不同密度的碎屑流,采用Herschel-Bulkley模型和幂率模型对流体流变性质进行描述;随后利用自制海底滑坡模型槽,模拟碎屑流在不同流速和黏度下对模型桩的冲击;并结合流体力学理论,建立阻力系数与非牛顿流体雷诺数之间关系表达式。试验数据表明:碎屑流黏度和流速是影响海底滑坡冲击力的主要因素,海底滑坡冲击力随着泥浆黏度和流速的增加而增大。同时,考虑碎屑流剪切稀释特性,得到管桩阻力系数随雷诺数变化的拟合公式,为海洋桩基础设计提供参考。 相似文献
9.
开展海底滑坡运动特性研究是深水陆坡区滑坡地质灾害认识与防治的基础,建立了基于非牛顿流体欧拉-欧拉两相流理论的小尺度海底滑坡数值模型。在与实验数据和BING程序结果对比验证的基础上,模拟分析海底滑坡的一般运动规律及特性,并同无水条件下的滑坡模拟结果进行了对比。结果表明:环境水的存在可引发"滑水"现象,延长滑坡运动时间,增加运动距离,但端部最大峰值速度相对无水条件时较小;滑坡体物质组成、地形坡度、初始速度、初始厚度等因素,对最终的运动距离有较大的影响;滑坡体在运动过程中因扰动、混水而导致的屈服强度和粘滞系数的不断降低是海底滑坡长距离运动的主要原因。 相似文献
10.
波致海底缓倾角无限坡滑动稳定性计算分析探讨 总被引：1，自引：1，他引：0
波浪作用下海底无限坡滑动稳定性计算的极限平衡法中,忽略了坡体水平向应力状态的影响,为此,针对波浪作用下海底缓倾角无限边坡的特点,提出直接基于滑动面处土体应力状态的滑动稳定性计算方法(简称应力状态法),并分析了其适用范围。对具体算例的分析表明,应力状态法计算得出的安全系数大于极限平衡法的安全系数,且随着滑动面深度的增加、土体泊松比以及边坡坡角的增大,两种计算方法得出的安全系数的差异会逐渐增大;对于波浪作用下的海底缓倾角无限边坡,在失稳时极可能沿具有一定厚度的滑动带而不是单一的滑动面而滑动,且波致最大剪应力所在的深度,常常不是斜坡体最易失稳滑移的深度。 相似文献
11.
Coastal inundation associated with extreme sea levels is the main factor which leads to the loss of life and property whenever a severe tropical cyclonic storm hits the Indian coasts. The Andhra and Orissa coasts are most vulnerable for coastal inundation due to extreme rise in sea levels associated with tropical cyclones. Loss of life may be minimized if extreme sea levels and associated coastal flooding is predicted well in advance. Keeping this in view, location specific coastal inundation models are developed and applied for the Andhra and Orissa coasts of India. Several numerical experiments are carried out using the data of past severe cyclones that struck these regions. The simulated inland inundation distances are found to be in general agreement with the reported flooding. 相似文献
12.
This study tests the hypothesis that the in situ void ratio of surficial marine sediments may be predicted from shear wave velocity-depth data with a reliability equal to that of other methods currently available. Shear wave velocity is fundamentally controlled by the number of grain-to-grain contacts per unit volume of material and by the effective stress across those contacts. In this study, three previously established empirical formulae are used to predict void ratio from velocity-depth data. Field data were acquired along a transect off the northern Californian coast across which water depth increased from 35 to 70 m and seafloor sediment type varied from sand to silty-sand, respectively. A towed seafloor sled device was used to collect shear wave refraction data, and a marked, systematic decrease in velocity was observed along the line, ranging from 35-70 m/s for the coarse, near-shore material to 25-40 m/s for the finer, offshore deposits. Void ratios predicted from these velocities were compared with data measured directly from box-core samples. Of the formulae used for prediction, two agree remarkably well with the control data. Both predicted and control values increase from 0.6-0.8 for the sandy material to 1.1-1.5 for the silty-sand. Thus, this study does not disprove the hypothesis set and demonstrates the potential of field shear wave velocity-depth data as a means of delineating spatial variation in void ratio for surficial marine sediments in a remote, nondestructive manner. 相似文献
13.
Hoi-Soo Jung Kap-Sik Jeong Yong-Shik Chu Sung-Hyun Park Ki-Hyune Kim 《Marine Georesources & Geotechnology》2001,19(3):181-195
Grain size and water content in box-core sediments from the Clarion-Clipperton fracture zone (C-C zone) in the northeast equatorial Pacific were analyzed in detail to understand the downcore variations across a hiatus between Quaternary and Tertiary layers. Grain-size distributions in the topmost core sediments show two modes: a coarse mode (peaked at 50 μm) and a fine mode (at 2-25 μm). The coarse mode disappears gradually with depth accompanied by the dissolution of siliceous fossil tests, whereas the fine mode coarsens due to the formation of authigenic minerals. Water content increases abruptly across a color boundary between an upper pale brown layer and a lower dark brown layer that is the hiatus between Quaternary and Tertiary layers. Abundant smectites and microvoid molds, which are created by the prolonged fossil dissolution in the underlying sediment, are attributed for the abrupt downcore variation of water content. Overall variations in grain size and water content in the topmost core sediments in the western C-C zone are possibly constrained by the dissolution of biogenic siliceous fossils. Variations in geotechnical properties related to these changes must be considered in the design of nodule collectors. 相似文献
14.
Shigehisa Nakamura 《Marine Geodesy》2001,24(1):27-33
This article concerns an interrelation between the sea levels and the western boundary flow near a tectonic boundary in a local zone in the Northwestern Pacific. In this zone, sea level variations at stations located on the coast facing the Pacific are studied to find the interrelation between variations of the Kurosio flow as an index of the distance of the flow axis off a specific coast. The result is discussed after data processing of the monthly means of the sea levels, and a notice is taken of variations caused by active crustal upheavals during a seismic event, a local earthquake. 相似文献
15.
Particulate samples were collected from the Changjiang river system during a flood period, in May 1997, and POC, stable isotope and lipids associated with particles were examined. Results showed the decrease (0.84% ～ 1.88%) of organic carbon content from the upper reaches to the estuary.δ13C values of particulate organic carbon was in the range of -24.9×10-3 to -26.6×10-3, which were close to the isotopic signature of continental C3 vegetation. Total particulate n-alkanes concentrations varied from 1.4 to 10.1μg/dm3,or from 23.7 to 107μg/g of total suspended matter. Fatty acids were present in all the samples, from 1.4 to 5.4μg/dm3, with saturated and unsaturated straight-chain and branched compounds in the carbon number range from C12 to C30. Both δ13C and the ratio of carbon content to nitrogen content indicate the predominance of terrestrial inputs (soil organic matter) among the particles. The biomarker approach has been used to identify the relative portion of terrigenous and autochthonous fraction in the particulate samples. The distribution of fatty acids suggests a striking phytoplanktonic and microbial signal in most particle samples. The terrestrial alkanes are used to estimate the contribution of terrestrial inputs along the mainstream. 相似文献
16.
Andrzej Chybicki 《Marine Geodesy》2018,41(1):1-23
Current trends of development of satellite derived bathymetry (SDB) models rely on applying calibration techniques including analytical approaches, neuro-fuzzy systems, regression optimization and others. In most of the cases, the SDB models are calibrated and verified for test sites, that provide favorable conditions for the remote derivation of bathymetry such as high water clarity, homogenous bottom type, low amount of sediment in the water and other factors. In this paper, a novel 3-dimensional geographical weighted regression (3GWR) SDB technique is presented, it binds together methods already presented in other studies, the geographically weighted local regression (GWR) model, with depth dependent inverse optimization. The proposed SDB model was calibrated and verified on a relatively difficult test site of the South Baltic near-shore areas with the use of multispectral observations acquired by a recently launched Sentinel-2 satellite observation system. By conducted experiments, it was shown that the proposed SDB model is capable of obtaining satisfactory results of RMSE ranging from 0.88 to 1.23[m] depending on the observation and can derive bathymetry for depths up to 12m. It was also shown, that the proposed approach may be used operationally, for instance, in the continuous assessment of temporal bathymetry changes, for areas important in the context of ensuring local maritime safety. 相似文献
17.
N. H. Khadge 《Marine Georesources & Geotechnology》2000,18(3):251-258
As a part of the environmental impact assessment studies, geotechnical properties of sediments were determined in the Central Indian Basin. The undrained shear strength and index properties of the siliceous sediments were determined on 20 box cores of uniform dimension collected from various locations in five preselected sites. The maximum core length encountered was 41 cm and most of the sediments were siliceous oozes consisting of radiolarian or diatomaceous tests. The shear strength measurements revealed that surface sediments deposited in recent times (0-10 cm) have a shear strength of 0-1 kPa; this value increases with depth, reaching 10 kPa at 40 cm deep. Older sediments have greater strength because of compaction. Water content varies in the wide range of 312-577% and decreases with depth. The clay minerals such as smectite and illite are dominant and show some control over water content. Wet density, specific gravity, and porosity do not indicate any notable variation with depth, thereby indicating a uniform, slow rate of sedimentation. The average porosity of sediments is 90.2%, specific gravity 2.18, and wet bulk density 1.12 g/cm 3 . Sediments exhibit medium to high plasticity characteristics, with the average plasticity index varying between 105% and 136%. Preliminary studies on postdisturbance samples showed an increase in natural water content and a decrease in undrained shear strength of sediments in the top 10- to 15-cm layer. 相似文献
18.
An Improved Calibration of Satellite Altimetric Heights Using Tide Gauge Sea Levels with Adjustment for Land Motion 总被引：2，自引：0，他引：2
Gary T. Mitchum 《Marine Geodesy》2000,23(3):145-166
Several major improvements to an existing method for calibrating satellite altimeters using tide gauge data are described. The calibration is in the sense of monitoring and correcting temporal drift in the altimetric time series, which is essential in efforts to use the altimetric data for especially demanding applications. Examples include the determination of the rate of change of global mean sea level and the study of the relatively subtle, but climatically important, decadal variations in basin scale sea levels. The improvements are to the method described by Mitchum (1998a), and the modifications are of two basic types. First, since the method depends on the cancellation of true ocean signals by differencing the altimetric data from the tide gauge sea level time series, improvements are made that produce a more complete removal of the ocean signals that comprise the noise for the altimetric drift estimation problem. Second, a major error source in the tide gauge data, namely land motion, is explicitly addressed and corrections are developed that incorporate space-based geodetic data (continuous GPS and DORIS measurements). The long-term solution, having such geodetic measurements available at all the tide gauges, is not yet a reality, so an interim solution is developed. The improved method is applied to the TOPEX altimetric data. The Side A data (August 1992?February 1999) are found to have a linear drift component of 0.55 + / 0.39 mm/yr, but there is also a significant quadratic component to the drift that is presently unexplained. The TOPEX Side B altimeter is estimated to be biased by 7.0 + / 0.7 mm relative to the Side A altimeter based on an analysis of the first 350 days of Side B data. 相似文献
19.
Extreme sea levels associated with severe cyclonic storms are common occurrences along the east coast of India. The coastal districts of Orissa have experienced major surges in the past. The recent Paradip super cyclone is one of the most severe cyclones, causing extensive damage to property and loss of lives. Extreme sea levels are major causes for coastal flooding in this region. Damages can be minimized if the extreme sea levels are forecast well in advance. In the present study, we develop a location specific, fine resolution model for the Orissa coast on the lines similar to that of IIT-D storm surge model (Dube et al. 1994). The model runs on a personal computer. The bathymetry for the model is extracted from very fine resolution naval hydrographic charts for the region extending from the south of Orissa to south of West Bengal. A simple drying scheme has also been included in the model in order to avoid the exposure of land near the coast due to strong negative sea surface elevations. An attempt was made in this study to simulate extreme sea levels along the Orissa coast using the data of past severe cyclones. The model results reported in the present study are in good agreement with available observations or estimates. 相似文献
20.
The continental margin of northern Sinai and Israel, up to Haifa Bay, is the northeastern limb of the submarine Nile Delta Cone. It is made up predominantly of clastics from the Nile and its predecessors. The continental shelf and coastal plain of Israel are built of a series of shore-parallel ridges composed of carbonate-cemented quartz sandstone (locally named kurkar), a lithification product of windblown sands that were piled up into dunes during the Pleistocene. The drop in global sea level and regression during the last glacial period exposed the continental shelf to subaerial erosion and created a widespread regional erosional unconformity which is expressed as a prominent seismic reflector at the top of the kurkar layers. The subsequent Holocene transgression abraded much of the westernmost kurkar ridges, drowned their cores, and covered the previous lowstand deposits with marine sands, which were in turn covered by a sequence of sub-Recent clayey silts. The Mediterranean coasts of Sinai and Israel are part of the Nile littoral cell. Since the building of the Aswan dams the sand supplied to Israel's coastal system is derived mainly from erosion of the Nile Delta and from sands offshore Egypt that are stirred up by storm waves. The sands are transported by longshore and offshore currents along the coasts of northern Sinai and Israel. Their volume gradually declines northward with distance from their Nile source. The longshore transport terminates in Haifa Bay where some sand is trapped, and the test escapes to deeper water by bottom currents and through submarine canyons, thus denying Nile-derived sand supply to the 40-km-long 'Akko-Rosh Haniqra shelf. The sand balance along Israel's coastal zone is a product of natural processes and human intervention. Losses due to the outgoing longshore transport, seaward escape, and landward wind transport exceed the natural gains from the incoming longshore transport and the abrasion of the coastal cliffs. The deficit is aggravated by the construction of (1) seaward-projecting structures that trap sands on the upstream side and (2) offshore detached breakwaters that trap sands between themselves and the coast. The negative sand balance is manifested by the removal of sand from the seabed and the consequent exposure of archaeological remains that were hitherto protected by it. The sediments that escape seaward from the longshore transport system form a 2.5- to 4-km-wide sandy apron adjacent to the shore that extends to where the water is 30 - 40 m deep. The apron's slope (0.5 - 0.8) is steeper than the theoretical equilibrium slope for the median grain-size diameter in this zone (0.1 - 0.3 mm). The beach sands and the apron's surficial sands are well sorted. Their grain size decreases with distance from shore, from 0.2 - 0.3 mm nearshore to 0.11 - 0.16 mm by the drowned ridge. The coarse-grained fraction consists of skeletal debris (commonly 5 - 12% carbonate matter) and wave-milled kurkar grains (locally named zifzif). In deeper water, the basal sands underlying the fine-grained sediment cover consist of 1- to 30-cm layers whose composition ranges from silty sands to various types of sands (fine, medium, coarse, and gravelly) to zifzif. For the most part, they contain large amounts of skeletal debris (20 - 60%) and small fragments of kurkar. Two types of kurkar rock were encountered offshore: a well-sorted, fine- to medium-grained (0.074 - 0.300 mm) lithified dune sand with variable amounts of carbonate cement, ranging from hard rock of low permeability to loose sand; and a porous sandstone made up predominantly of algal grains and skeletal debris (calcarenite). 相似文献