共查询到10条相似文献，搜索用时 109 毫秒
1.
The quasi-steady resonant vibration of a flexible seagoing vessel under resonant wave excitation force, called springing, is studied in this paper. A higher-order B-spline Rankine panel method is used to represent the effects of the fluid motion surrounding this flexible seagoing vessel, and a finite element formulation based on Vlasov beam is employed for structural response. The boundary integral equation and finite element equation, both for fluid and structural domains, are fully coupled with each other using an iterative implicit method in the time domain. Coupling between the two field equations is achieved by relying on fixed-point iteration with relaxation aided by Aitken's δ2 process to maximize convergence speed. The steady-unsteady coupling term or m-term in the linearized body boundary condition derived by Timman and Newman is taken into account for accurate prediction of flexible body motion when forward speed is present. The 2nd derivative of basis potential in the m-term is obtained by modifying Nakos approach, which was originally developed using the Stokes theorem for rigid body ship motion problem. For the solution of the FE equation, instead of conventionally used modal superposition method, a direct integration scheme based on Newmark method is employed. It is believed that this technique is more attractive in the sense that it allows us free from the selection of optimum number of mode-shapes in the computation. 相似文献
2.
The present study deals with the exact solution of the title problem in the case where a uniformly distributed p0 cos ωt-type force acts over a rectangular portion of the plate. The problem is of interest in naval and ocean engineering systems where a motor or an engine mounted on a plate or slab induces a dynamic excitation over a finite area. Mechanical designers commonly consider the problem from the point of view of a concentrated dynamic or static force. On the other hand, modelling the structural system as an orthotropic element is of considerable interest in ocean and naval design in view of the ever-increasing use of composite materials and also of the anisotropic characteristics often induced by metallurgical processes. 相似文献
3.
The main objective of this study is to numerically investigate the characteristics of ultimate compressive strength of stiffened panels with opening and also to fit the design-oriented formulae. For this purpose, three series of well executed experimental data on longitudinally stiffened steel plates with and without opening subjected to the uniform axial in-pane load which is carried out to study the buckling and post-buckling up to the final failure are chosen. Also, a nonlinear finite element method capable of efficiently analyzing the large elasto-plastic deflection behavior of stiffened panels is developed and used for simulation. The feasibility of the present simulation process is confirmed by a good agreement with the experimental results. More case studies are developed employing the simulation process to analyze the influence of various design variables on the reduction rate of ultimate strength of stiffened panel induced by opening. Based on the computed results, two design formulae are fitted and the accuracy of design formulae is studied. Furthermore, the viability of the design formulae for practical engineering is proved. 相似文献
4.
5.
A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods. 相似文献
6.
船体板架结构在屈曲约束下的优化问题具有变量多和约束多的特点,且屈曲计算需借助有限元分析,属于大规模耗时优化问题,运用常规优化方法求解需要较高的计算成本。这里提出一种适用于屈曲约束下船体板架快速优化方法,该方法利用板格屈曲利用因子具有局部性的特点,对板格厚度自变量空间进行降维处理;利用板格屈曲利用因子对板格厚度具有单调性的特点,采用牛顿迭代方法求解其达到目标值的板格厚度;同时比较板格在相同重量增量下,加筋叠加板厚与仅加板厚对屈曲利用因子改善程度的大小决定是否加筋;通过两阶段的迭代寻优,快速获得最优的板厚以及防屈曲筋布置方案。某油船双层底优化结果显示,该方法能够在30步之内完成优化计算,优化效率高;优化方案相比原始方案减重达17.63%,绝大部分板格屈曲利用因子取值在0.9～1.0之间,材料得到充分利用。 相似文献
7.
A 3D potential-based and desingularized high order panel method 总被引：1，自引：0，他引：1
In this paper, a novel high order panel method based on doublet distribution and Gaussian quadrature was adopted to deal with the potential flow problem. In the geometry representation we employed both the exact surface and NURBS surface form to construct the surface panel. These data were calculated directly from the mathematical shape definition. Furthermore, no fixed order of doublet density distribution was assumed on each panel. Not only the number of panels could be chosen, but also the Gaussian order of each panel. The numerical results for sphere, ellipsoid and Wigley hull demonstrated here indicated that the present method was adapted to the potential flow problem. Moreover, the NURBS surface geometry representation was capable of further potential flow optimal calculation. 相似文献
8.
In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay. 相似文献
9.
Sakir Bal 《Ocean Engineering》1998,26(4):343-361
A potential based panel method for the hydrodynamic analysis of 2-D hydrofoils moving beneath the free surface with constant speed without considering cavitation is described. By applying Green's theorem and the Green function method, an integral equation for the perturbation velocity potential is obtained under the potential flow theory. Dirichlet type boundary condition is used instead of Neumann type boundary condition. The 2-D hydrofoil is approximated by line panels which have constant source strength and constant doublet strength distributions. The free surface condition is linearized and the method of images is used for satisfying this free surface condition. All the terms in fundamental solution (Green function) of perturbation potential are integrated over a line panel. Pressure distribution, lift, residual drag and free surface deformations are calculated for NACA4412, symmetric Joukowski and van de Vooren profile types of hydrofoil. The results of this method show good agreement with both experimental and numerical methods in the literature for the NACA4412 and symmetric Joukowski profile types. The lift and residual drag values of the van de Vooren profile are also presented. The effect of free surface is examined by a parametric variation of Froude number and depth of submergence. 相似文献
10.
In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay. 相似文献