共查询到10条相似文献，搜索用时 91 毫秒
1.
Surface-generalized ambient noise in a shallow ocean waveguide with a sediment layer possessing a specific class of density and sound speed distributions capable of describing a realistic seabed environment is considered in this analysis. This class of non-uniform sediment layer has the density and sound speed distributions varying with respect to depth as a generalized-exponential and an inverse-square function, respectively. The study invokes a formulation developed by Kuperman and Ingenito (Kuperman, W. A., Ingenito, F., 1980. Spatial correlation of surface-generated noise in a stratified ocean. J. Acoust. Soc. Am., 67, 1988-1996.) for surface noise generation, in conjunction with the analytical solutions for the Helmholtz equation corresponding to the sediment layer, to arrive at an analytical expression convenient for numerical implementation. The intensity and spatial correlation of the noise sound field are analyzed with respect to the variation of the system parameters, including frequency, sediment layer thickness, sound speed gradient, with emphasis on the effects of sediment properties on the ambient noise field. The results have demonstrated that the intensity of the noise field is relatively sensitive to the variation of the parameters, but the spatial correlation is affected to a less extent, suggesting that the energy distribution, rather than the spatial structure, of the noise field is more susceptible to the environmental variations. 相似文献
2.
This paper considers acoustic plane wave scattering from a rough seabed on a transition sediment layer overlying an elastic sea basement. The transition sediment layer is assumed to be fluid-like, with density and sound speed distributions behaving as generalized-exponential and inverse-square functions, respectively. This specific class of density and sound speed profiles deserves special attentions not only because it is geologically realistic, but also renders analytical solutions to the Helmholtz equation, making it particularly useful in the study of ocean and seabed acoustics. Based upon a boundary perturbation approach, the computational algorithm for the spatial spectrum in terms of the power spectral density of the scattered field has been developed and implemented. The results have shown that, while the coherent field mainly depends upon the gross structure of the seabed roughness, e.g., RMS roughness, the scattered field is significantly affected by the details of the roughness distributions specialized by the roughness power spectrum and the spatial correlation length of the rough surface. The dependence of the power spectral density of the scattered field on the various types of sediment stratifications, including the constant and the k2-linear sound speed distributions, is also included in the analysis. 相似文献
3.
Acoustic scattering of a plane wave incident upon a rough surface over a transition fluid layer within which both the density and sound speed vary with depth is considered. A theory based upon a boundary perturbation method has been applied to a typical seabed environment to study the power spectral density representing the energy distribution of the scattered field over the space. The effects of frequency and roughness properties, including the
roughness height, spatial correlation, and power spectrum, on the power spectral density have been investigated. The results demonstrate that the power spectral density of the scattered field depends upon all the aforementioned parameters, particularly the correlation length and the power spectrum of the rough surface, a conclusion in distinct contrast to the results for the coherent field obtained in an earlier study. It was found that the constituents of the rough surface such as the correlation length and wavenumber spectrum dominate the angular distribution of the scattered energy. These results indicate that it is crucial to employ a suitable topological model in the study of rough seabed scattering. 相似文献
4.
Miller J.H. Bartek L.R. Potty G.R. Dajun Tang Jungyul Na Yiquan Qi 《Oceanic Engineering, IEEE Journal of》2004,29(4):940-951
This paper describes measurements of sediments during the 2000-2001 Asian Seas International Acoustic Experiment in the East China Sea. A number of techniques were used to infer properties of these sediments, including gravity and piston cores, subbottom profiling using a water gun, long-range sediment tomography, and in situ measurement of conductivity. Historical data from echosounder records and cores showed two regions of surficial sediments in the experimental area: a silty area to the west and a sandy area to the east. The tomography, cores, and water-gun measurements confirm the two surficial sediment regions seen in the historical data and also indicate that the subbottom structure at the experimental site consists of a thin (0-3 m thick) layer of sandy sediment directly beneath the sea floor. Below this layer, there is an extensive package of sediment with relatively uniform acoustic attributes. Core analysis shows that the surface sediment layer varies in compressional wave speed from a low near 1600 m/s in the west side of the experiment area to 1660 m/s in the east side of the experiment area. Long-range sediment tomography inversions show a similar spatial variation in the surface layer properties. In addition, the layer thickness as determined from tomography is consistent with the estimates from subbottom profiling. 相似文献
5.
Acoustic environment and physico‐mechanical properties of the shelf seabed off the pearl river mouth
Abstract The vast shallow sea off the Pearl River mouth in the northern South China Sea is an important prospecting area for offshore oil development. In recent years, the authors have investigated acoustic and geotechnical characteristics of marine sediments in this area. An intercalated layer of low sound velocity and low compressive strength has been found within the seabed, in which the median diameter of sediment grains is fine and the sound velocity is 100–200 m/s lower than that of the overlying and underlying layers. The minimum unconfined compressive strength of this layer is 0.075 kg/cm2, which is lower than that of the over‐ and underlying layers by an order of magnitude. Such an intercalation often constitutes a threat to the stability of shallow foundation soil. In case of overloading, the layer may be weakened, and seafloor sliding between different sediment layers may occur. The regional distribution of these kinds of weak intercalations of low sound velocity may be traced by a subbottom profiler and by means of sediment acoustical investigations. Correlation between the gray level of a layer on subbottom profile records and physical properties of the layer (including sound velocity and reflectivity) suggests that the layer of sufficient bearing capacity must be searched by means of sediment acoustics at least to the depth of a high‐velocity substratum of stronger reflection. 相似文献
6.
Kraft B.J. Overeem I. Holland C.W. Pratson L.F. Syvitski J.P.M. Mayer L.A. 《Oceanic Engineering, IEEE Journal of》2006,31(2):266-283
Geoacoustic properties of the seabed have a controlling role in the propagation and reverberation of sound in shallow-water environments. Several techniques are available to quantify the important properties but are usually unable to adequately sample the region of interest. In this paper, we explore the potential for obtaining geotechnical properties from a process-based stratigraphic model. Grain-size predictions from the stratigraphic model are combined with two acoustic models to estimate sound speed with distance across the New Jersey continental shelf and with depth below the seabed. Model predictions are compared to two independent sets of data: 1) Surficial sound speeds obtained through direct measurement using in situ compressional wave probes, and 2) sound speed as a function of depth obtained through inversion of seabed reflection measurements. In water depths less than 100 m, the model predictions produce a trend of decreasing grain-size and sound speed with increasing water depth as similarly observed in the measured surficial data. In water depths between 100 and 130 m, the model predictions exhibit an increase in sound speed that was not observed in the measured surficial data. A closer comparison indicates that the grain-sizes predicted for the surficial sediments are generally too small producing sound speeds that are too slow. The predicted sound speeds also tend to be too slow for sediments 0.5-20 m below the seabed in water depths greater than 100 m. However, in water depths less than 100 m, the sound speeds between 0.5-20-m subbottom depth are generally too fast. There are several reasons for the discrepancies including the stratigraphic model was limited to two dimensions, the model was unable to simulate biologic processes responsible for the high sound-speed shell material common in the model area, and incomplete geological records necessary to accurately predict grain-size 相似文献
7.
Jin-Yuan Liu Ping-Chang Hsueh Chen-Fen Huang 《Oceanic Engineering, IEEE Journal of》2002,27(4):853-861
The problem of coherent reflection of an acoustic plane wave from a rough seabed with a randomly inhomogeneous sediment layer overlying a uniform elastic basement is considered in this analysis. The randomness of the sound field is attributable to the roughness of the seabed and the sound-speed perturbation in the sediment layer, resulting in a joint rough surface and volume scattering problem. An approach based upon perturbation theory, combined with a derived Green's function for a slab bounded above and below by a fluid and an elastic half-space, respectively, is employed to obtain an analytic solution for the coherent field in the sediment layer. Furthermore, a boundary perturbation theory developed by Kuperman and Schmidt (1989) is applied to treat the problem of rough surface scattering. A linear system is then established to facilitate the computation of the coherent reflection field. The coherent reflection coefficients for various surface roughness, sediment randomness, frequency, sediment thickness, and basement elasticity have been generated numerically and analyzed. It was found that the higher/larger size of surface and/or medium randomness, frequency, thickness, and shear-wave speed, the lower the coherent reflection. Physical interpretations of the various results are provided. 相似文献
8.
本文通过对南海海底沉积物样品的声学物理参数和沉积粒度特征统计分析，发现了高、低含砂量沉积物的声学物理特征存在明显差异，建立了海底沉积物的含砂量与压缩波速度、孔隙度、含水量和密度等经验公式，分析了含砂量变化与沉积物的体积压缩模量和密度变化的关系，从声速理论基础上阐明了含砂量变化引起沉积物压缩波速度变化的内在原因是含砂量变化引起了体积压缩模量和密度发生了变化，说明了含砂量增大引起沉积物压缩波速度增大的内在原因是含砂量增大引起了体积压缩模量变化量大于密度变化量，从而在数据统计和理论分析结合基础上，论证了含砂量是影响海底沉积物压缩波速度的重要因素之一。这一研究对声学方法反演海底沉积物粒度参数和沉积物类型、地声参数转换模型的建立，以及对水声反演海底和海底资源勘探等方面都具有重要理论意义和应用价值。 相似文献
9.
The paper discusses an inversion method that allows the rapid determination of in situ geoacoustic properties of the ocean bottom without resorting to large acoustic receiving apertures, synthetic or real. The method is based on broad-band waterborne measurements and modeling of the waveguide impulse response between a controlled source and a single hydrophone. Results from Yellow Shark '94 experiments in Mediterranean shallow waters using single elements of a vertical array are reviewed, inversion of the bottom parameters is performed with an objective function that includes the processing gain of a model-based matched filter (MBMF) receiver relative to the conventional matched filter. The MBMF reference signals incorporate waveguide Green's functions for known geometry and water column acoustic model and hypothesized bottom geoacoustic models. The experimental inversion results demonstrated that, even for complex environmental conditions, a single transmission of a broad-band (200-800 Hz) coded signal received at a single depth and a few hundred forward modeling runs were sufficient to correctly resolve the bottom features. These included the sound speed profile, attenuation, density, and thickness of the top clay sediment layer, and sound speed and attenuation of the silty clay bottom. Exhaustive parameter search proved unequivocally the low-ambiguity and high-resolution properties of the MBMF-derived objective. The single-hydrophone results compare well with those obtained under identical conditions from matched-field processing of multitone pressure fields sampled on the vertical array. Both of these results agree with expectations from geophysical ground truth. The MBMF has been applied successfully to a field of advanced drifting acoustic buoys on the Western Sicilian shelf, demonstrating the general applicability of the inversion method presented 相似文献
10.
Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density,
compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the
response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive,
with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages
of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed
coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions
with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths
and sensitivities of each approach are explored through simulations guided by experience with measured data. 相似文献