首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
-The hydrodynamic forces on a smooth inclined circular cylinder exposed to oscillating flow were experimentally investigated at Reynolds number (Re) in the range 40000-200000 and Keulegan-Capenter number (KC) in the interval from 5-40. In the test, Re number and KC number were varied systematically. The inertia force coefficient (Cu) and the drag force coefficient (CD) in Morison equation were determined from the measured loads and the water particle kinematics. In this analysis a modified form of Morison equation was used since it uses the normal velocity and acceleration. Thus, the applicability of the Cross Flow Principle was assumed. This principle, simply stated, is as follows: the force acting in the direction normal to the axis of a cylinder placed at some oblique angle with the direction of flow is expressed in terms of the normal component of flow only, and the axial component is disregarded. Both the total in-line force coefficient (CF) and transverse force (lift) coefficient (Cf) were analyzed  相似文献   

2.
- A composite pipeline is defined as a main big pipe composed of one or several small pipes. The flow behaviour around a submarine composite pipeline is more complicated than that around a single submarine pipeline. A series model test of composite pipelines in a wave-current coexisting field was conducted by the authors. Both in-line and lift forces were measured, and the resultant forces were also analyzed. The results of lift forces and resultant forces are reported in this paper. It is found that the lift force coefficients for composite pipelines are well related to the KC number. The lift force coefficients for an irregular wave-current coexisting field are smaller than those for a regular wave-current coexisting field. The frequency of lift force is usually twice the wave frequency or higher. The authors test indicates that the resultant forces are about 10 to 20 percent larger than in-line forces (horizontal forces). The effect of water depth is analyzed. Finally, the relationship between lift f  相似文献   

3.
Based on the linear wave theory, the lift force on the cylinder under the action of both regular waves and currents related to inline force and the resultant force has been investigated. The relationship between the hydrodynamic coefficients of resultant force Cf, of drag force Cd, of inertia force Cm and of lift force CL and the redefined KC number is reported. It is indicated that in a certain region of KC number, the influence of lift force on the resultant force can not be ignored.  相似文献   

4.
By using a process of successive approximations, the Boundary-Layer equations are solved to determine the separation points of a circular cylinder in oscillatory flow under the conditions of vortex existing. Combining with the discrete vortex model, the separation points and the fluid force coefficients are calculated at different KC numbers and Re numbers, A modified Morison equation is used in calculating the inline forces, and good agreements are obtained between the calculated results and those from other's experiments.  相似文献   

5.
The drag and lift forces acting on a circular cylinder shaped model near a plane have been measured in a water tunnel. The Reynolds number varies from 4.0×103 to 1.5 ×10s, the gaps between the cylinder and the plane boundary being from 0.2D to 3.0D (Diameters of the cylinder). The DD, CL as well as the response frequency have been determined. The results show that when the ratio of the gap to the cylinder diameter H/ D> 1.0, the influence of the plane boundary can be neglected while 0.2 < H/ D < 1.0, the value of drag becomes larger as H / D decreases, the time-averaged lift force is not equal to zero, a net lift force, which is away from the wall, appears.  相似文献   

6.
The inline and lift forces on bipiles in parallel array induced by both irregular waves and currents were investigated experimentally in this paper. The characteristics in both time and frequency domains of inline, lift and resultant forces as well were analyzed. The grouping effect coefficients of inline and resultant forces on two piles related to KC number and relative spacing parameters are given. A comparison of the magnitude and direction of resultant forces on two piles in parallel array with the corresponding values for single cylinder is also made.  相似文献   

7.
The spatial evolution of vortices and transition to three-dimensionality in the wake of two circular cylinders in tandem arrangement have been numerically studied. An improved virtual body method developed from the virtual boundary method is used here. A Reynolds number range between 220 and 270 has been considered, and the spacing between two cylinders is selected as L/D = 3 and L/D = 3.5. When L/D = 3, the secondary vortices of Mode-A are seen to appear at Re = 240 and persist over the range of the Reynolds number of 240 - 270. When L/D = 3.5, the similar critical Reynolds number has been found at Re = 250. No obvious discontinuity has been found in the Strouhal-Reynolds number relationship, and this is different from three-dimensional flow around a single cylinder at the critical Reynolds number. The spanwise wavelength is about four times the diameter of the cylinder, and it is the characteristic wavelength for ModeA instability. This paper can give some foremost insight into the three-dimensional instability of flow by complicated geometrical configuration.  相似文献   

8.
王艺 《中国海洋工程》2008,22(3):371-384
In this paper, equations calculating lift force of a rigid circular cylinder at lock-in in uniform flow are deduced in detail. Besides, equations calculating the lift force on a long flexible circular cylinder at lock-in are deduced based on mode analysis of a multi-degree freedom system. The simplified forms of these equations are also given. Furthemore, an approximate method to predict the forces and response of rigid circular cylinders and long flexible circular cylinders at lock-in is introduced in the case of low mass-damping ratio. A method to eliminate one deficiency of these equations is introduced. Comparison with experimental results shows the effectiveness of this approximate method.  相似文献   

9.
A flow past a circular-section cylinder with a perforated conic shroud, in which the perforation is located at the peak of the conic disturbance as the shroud installed on the cylinder and uniformly distributed with several circular holes,is numerically simulated at a Reynolds number of 100. Two factors in the perforation are taken into account, i.e. the attack angle relative to the direction of incoming flow and diameter of holes. The effect of such perforation on the drag, lift and vortex-shedding frequency is mainly investigated. Results have shown that variation of the attack angle has a little effect, especially on the drag and vortex-shedding frequency, except in certain cases due to the varied vortex-shedding patterns in the near wake. The increasing hole diameter still exhibits a little effect on the drag and frequency of vortex shedding, but really reduces the lift, in particular at larger wavelength, such as the lift reduction reaching almost 66%–68% after introducing the perforation.  相似文献   

10.
赵明  滕斌 《中国海洋工程》2004,18(2):267-280
The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献   

11.
Wave-Current Forces on Slender Circular Cylinders   总被引:3,自引:0,他引:3  
- A series model tests of wave forces by both regular and irregular waves combined with currents on single piles and bipiles in tandem and parallel arrays have been carried out. Based on Morison Equation, linear wave theory and linear wave spectrum theory as well, the characteristics of inline, lift and resultant forces on cylinders have been analyzed respectively. The drag, inertia and lift coefficients CD, CM and CL f皉 single piles related to KC number and the grouping effect coefficients of inline, lift and resultant forces on bipiles in tandem and parallel arrays related to KC number are given in this paper.  相似文献   

12.
双色入射波下二阶波浪力响应函数   总被引:6,自引:0,他引:6  
滕斌  李玉成  董国海 《海洋学报》1999,21(2):115-123
应用边界元方法,对双频入射波在和频及差频下的二阶速度势做了完整的求解,通过物面积分计算了任意三维结构上的二阶波浪力的传递函数.对简单几何物体,与发表的结果做了对比,两者吻合良好,验证了本方法的正确性.应用这一方法还对复杂的张力腿平台模型做了实际计算,发现在低频和高频区二阶波浪力平方响应函数有着显著的能量分布.  相似文献   

13.
冰激振动及冰荷载动力特性的试验研究   总被引:2,自引:0,他引:2  
佟建峰  宋安等 《海洋工程》2001,19(4):34-39,45
回顾了解决海冰引起结构振动分析方法的要求,通过室内冰力模型试验得出了冰激振动的重要参数-冰力频率,幅值的特性。研究表明,在低冰速时,冰力频率与冰速对冰厚之比呈线性关系;高冰速时,冰力步与冰速对冰厚之比呈现恒定性,文章还根据试验数据以及统计分析,推荐了冰力幅值计算公式和取值范围。  相似文献   

14.
国内外尚无人对冰力掩蔽效应进行专门研究。通过低温冰工程实验室内的冰力模型试验,研究了多桩柱结构在不同位置时桩柱间对冰力的掩蔽效应,探索了冰力掩蔽效应的机理和规律,得到了不同冰厚、不同桩柱直径、不同冰攻角、桩柱间不同位置时的冰力掩蔽系数。研究结果可供工程应用。  相似文献   

15.
The shielding effect of the front pile-row on the ice force acting on the hack pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the hack pile-row to model the water resisting pipe-phalanx within the jacket. The shielding factor for ice force corresponding to different conditions are given in this paper. The research indicates that there are many factors, including the longitudinal and lateral spacing between the front and hack pile-row, ice attacking angle and the ratio of pile diameter to ice thickness, that influence the shielding effect on ice force.  相似文献   

16.
This paper presents the results of an experimental investigation on the variation in the tension and the distribution of drag force coefficients along flexible risers under vortex-induced vibration (VIV) in a uniform flow for Reynolds numbers (Re) up to 2.2×105. The results show that the mean tension is proportional to the square of the incoming current speed, and the tension coefficient of a flexible riser undergoing VIV can be up to 12. The mean drag force is uniformly and symmetrically distributed along the axes of the risers undergoing VIV. The corresponding drag coefficient can vary between 1.6 and 2.4 but is not a constant value of 1.2, as it is for a fixed cylinder in the absence of VIV. These experimental results are used to develop a new empirical prediction model to estimate the drag force coefficient for flexible risers undergoing VIV for Reynolds number on the order of 105, which accounts for the effects of the incoming current speed, the VIV dominant modal number and the frequency.  相似文献   

17.
The present brief paper is intended to show that the fluid forces on a small cylinder can be considerably magnified when it is in the flow field of a larger cylinder. Two cylinders of unequal diameter are oscillated in a tank of fluid, and the lift and in-line forces on the smaller cylinder are measured when the pair of cylinders is placed at various orientations and spacings.  相似文献   

18.
风浪流联合作用下单点系泊船的受力分析   总被引:1,自引:0,他引:1  
研究了风浪流联合作用下单点系泊船的受力问题.在应用Newman公式计算波浪漂移力的基础上,结合文献《Fleet Moorings Design Manual》,提出了不同方向的风、浪、流联合作用时,单点系泊船所受到的横向力、纵向力和回转力矩的计算方法.提出了风浪同向时,不同风流夹角组合对应的船舶平衡位置的确定方法.为缆绳、锚的选择以及舵角的控制提供了依据.最后通过算例验证了本方法的适用性和实用性.  相似文献   

19.
岙山成品油码头海底边坡稳定性分析   总被引:1,自引:0,他引:1  
根据岙山成品油码头工程地质勘察所得的资料,选择边坡较陡的地段,采用折线法、圆弧条分法和总应力极限平衡法,对在自重、地震力和波浪力等因素作用下的边坡稳定性进行验算分析。结果表明,海底边坡较陡地段浅层土体的稳定性较差,土体滑动面可能发生在海底下9~12.5m处。对地层的作用波浪力较地震力要小,但两者均可能成为边坡土体滑动的诱因。  相似文献   

20.
刘思思  张朝辉  刘俊铭 《海洋学报》2010,32(10):6902-6907
微平面间黏着力对微机电系统(MEMS)非常重要,常是决定其能量损耗乃至寿命长短的最主要因素.MEMS中的黏着力主要来源之一就是介于两互相接触平面间的弯月面力.弯月面力主要取决于相互接触的两平面间形成的弯月面形状.本文通过分析两微小平面在分离过程中弯月面形状的变化,得到在不同表面亲水/疏水性能、初始液面高度、分离距离等条件下的弯月面形状,计算得出在不同初始条件下断裂高度和弯月面力的数值以及随之变化的规律,为MEMS的性能分析和寿命计算提供依据.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号