共查询到20条相似文献，搜索用时 62 毫秒
1.
我国海砂资源的开发与对策 总被引：5，自引：1，他引：5
对国内外海砂开采现状、需求、环境影响综合分析的基础上，认为今后海砂开发势必由近岸向浅海区发展，通过编制海砂开采规划，加强海砂管理，保护海洋环境，加强海砂勘探、开采、洗砂和环境影响评价等工作，为台湾浅滩海砂开采做好技术储备，以促进台湾浅滩海砂开采产业的发展。 相似文献
2.
3.
海南岛东北部海域海砂资源特征及成因 总被引：2，自引：0，他引：2
海南岛周边浅海海砂资源丰富,其东北部海域砂、砾质沉积物分布面积可达数百平方千米,平均厚度超过10m,均为全新世海相沉积。通过对海南岛东北部海域的水深、地层、沉积物粒度等方面的调查,研究了该区域海砂资源的分布、范围、规模、厚度及沉积环境,对海砂的质量和开发利用进行了初步分析。其中,位于琼州海峡东口的潮流沙脊区是海砂的主要分布区域,沉积厚度在20m以上,海砂分选好、次圆状,砂含量超过80%,海砂各项指标良好,用途广泛。研究区海砂资源主要受海底地形和潮流的共同作用而形成,属全新世陆架潮流沉积体系,近岸处亦受到陆域物质输入和浅水波浪的影响,沉积物来源主要为琼州海峡内部和粤西,海南岛的物质供给可能相对较少。 相似文献
4.
烟台市海砂资源开发仍存在着无序状态,干群资源保护意识不强,生态环境进一步恶化,工农业生产和人民生活受到严重影响等问题。加强管理,树立以保护为主的可持续发展的观念;制定并实施海砂开发综合管理的法律制度;建立和完善海砂开发利用监测系统和管理信息系统;加强对海岸带功能区划,充分利用和保护海砂资源;用行政手段,制止乱采乱挖,是利用和保护好烟台市海砂资源的有效途径。 相似文献
5.
《海洋地质与第四纪地质》2016,(6)
对南海北部陆架沉积区244个表层沉积物样品进行了粒度组分、多元统计及输运趋势分析,结果表明:南海北部陆架区共分布9种沉积物类型,粒度组成以砂和粉砂为主,砂含量占绝对优势,沉积物主要粒级为0~8Φ,优势粒级为0~4Φ。研究区东北部粒径较粗,以中砂为主,分选中等-好,负偏,峰态中等-平坦,西南部粒径较细,以粉砂为主,分选较差,正偏,峰态平坦,中间过渡及陆架外缘粒径中等,以细砂为主,分选中等,正偏,峰态尖锐。基于粒度多元统计及输运趋势分析,南海北部陆架划分为3个沉积区:珠江口及粤东近岸沉积区(I区):主要受控于沿岸流,水动力条件较弱,物质来源以珠江、韩江等河流输运物质及近岸基岩风化、岛屿剥蚀作用产物为主,少量东沙群岛海底冲刷剥蚀产物;混合过渡沉积区(II区):受黑潮南海分支、南海暖流及沿岸流共同作用,水动力条件中等,物源复杂多样,为珠江携带陆源物质、台湾浅滩物质以及东沙群岛附近海底剥蚀产物的混合沉积区域;台湾浅滩及珠江古三角洲残留沉积区(III区):受黑潮南海分支、南海暖流、北部九龙江、沿岸流等影响,海洋水动力条件较强,以晚更新世的残留沉积为主,同时可能接受了少量现代沉积物质。 相似文献
6.
近年来，临海工程建设成为带动沿海经济发展的一个新的经济增长点。许多电站建设、钢铁厂建设都急需土地资源，沿岸海域的围垦为这些项目建设提供了宝贵的土地资源。福建省目前正在进行的三大围垦工程，如福清东壁岛围垦、莆田澄峰围垦、泉州走马埭围垦等以及许多重点项目，如高速公路、渔港、空港建设都需要海砂作为建设填充材料，海砂需求量日益增加。有了市场的需求，许多企业或个人擅自开采海砂现象则变得十分严重。无度、无序的海砂开采造成了十分严重的海洋环境问题。福建省莆田市许多沙滩下蚀、岸线后退、近岸海域生态环境恶化等均与近岸采沙有关；尤其是岸线后退直接威胁到当地老百姓的生命财产。 相似文献
7.
闽江口及周边海域沉积物输运及资源效应 总被引：1，自引：0，他引：1
河流入海泥沙的大部分主要分布在河口、三角洲及近岸陆架地区,发育一系列的粗颗粒沉积体系,是海砂资源重要分布区。本文以福建闽江口为研究对象,初步探讨了沉积物输运过程及海砂资源的形成机制。观测结果表明,闽江河口水体盐度由河口内部向口外海域逐渐增大,水体浊度总体减小;闽江河口附近海域近底部(距离海底25cm)流向表现出一定的旋转流特征,潮周期内余流表现为向海输运,而推移质输运主要发生在涨潮期间,并且潮周期内净向陆输运。表层沉积物粒度分析结果表明,闽江河口水下三角洲前缘表层沉积物主要由粗颗粒物质组成,沉积物类型以砂和砂质粉砂为主,中值粒径小于4Φ;前三角洲地区表层沉积物主要由细颗粒物质组成,中值粒径介于4Φ—6Φ之间。沉积物粒径趋势分析结果表明,闽江入海泥沙经梅花水道和长门水道入海后,在盐淡水混合、径流、潮流的作用下,在闽江河口形成了四个粗颗粒沉积物汇聚区,成为闽江口地区海砂资源的重要分布区;而细颗粒物质在河口羽流和潮流的作用下向偏东方向输运,形成了以黏土质粉砂为主的前三角洲。 相似文献
8.
海南岛东南浅海表层沉积物粒度特征及沉积环境 总被引：1，自引：0，他引：1
对海南岛东南浅海377组表层沉积物样品(平均水深112.3 m)开展粒度测定及沉积物类型划分,并运用统计规律及沉积输运趋势分析,探讨了底质沉积物分布格局与物质来源及沉积动力环境关系。结果表明,海南岛东南浅海沉积物类型复杂,共分布13种沉积物类型,粒度组成以粉砂和砂为主,平均粒径均值为5.73Φ,优势粒级为细粉砂级(6~8Φ),分选差。不同海域沉积物粒径差异明显,北部近岸以含砾沉积为主,中部呈NE-SW向的砂质沉积区(水深80~120 m),西南近岸滨海、北中部海域以及东南部海域多为粉砂、黏土沉积。结合地理位置、沉积物源及水动力条件差异,研究区划分为3个沉积区:I区主要以含砾粗颗粒沉积为主,受控于海南岛上径流及强风浪作用,物质来源以万泉河等河流输运及岸线侵蚀物质为主,强动力(高能)沉积环境;II区以砂沉积为主,受到表层流及风浪等共同影响,可能主要是残留滨海沉积混入了海南岛径流及岸线侵蚀、少量珠江流域及外海复杂来源等现代细粒物质的混合沉积,中等动力沉积环境;III区以细粒沉积为主,主要受华南近岸流、风浪作用及南海暖流影响,推测物质来源主要为海南岛河流输入、岸线侵蚀及复杂外海来源细粒物质的加入,弱动力(低能)沉积环境。 相似文献
9.
10.
《海洋地质与第四纪地质》2001,21(2)
中国海砂资源研究王圣洁 ,刘锡清 ,戴勤奋著 海洋出版社出版本书是国际合作项目 CCOP- DCGM 数字化编图计划和国土资源部海洋地质工作项目 (中国近海建筑砂砾石矿产资源潜力的可视化评价 )共同资助研究的全面总结。全书首次从建筑集料角度系统地介绍了海砂的类型、实验测试方法和资源评价体系 ,通过对我国陆架调查资料的分析 ,确定了中国海砂资源的潜力和分布规律 ;本书还介绍了海砂开采的技术并结合我国建筑用砂的发展趋势讨论了可能出现的资源、环境和可持续发展问题。本书资料详实、内容丰富 ,特别适合从事海洋地质和资源规划以及… 相似文献
11.
Coastal inundation associated with extreme sea levels is the main factor which leads to the loss of life and property whenever a severe tropical cyclonic storm hits the Indian coasts. The Andhra and Orissa coasts are most vulnerable for coastal inundation due to extreme rise in sea levels associated with tropical cyclones. Loss of life may be minimized if extreme sea levels and associated coastal flooding is predicted well in advance. Keeping this in view, location specific coastal inundation models are developed and applied for the Andhra and Orissa coasts of India. Several numerical experiments are carried out using the data of past severe cyclones that struck these regions. The simulated inland inundation distances are found to be in general agreement with the reported flooding. 相似文献
12.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
13.
This study tests the hypothesis that the in situ void ratio of surficial marine sediments may be predicted from shear wave velocity-depth data with a reliability equal to that of other methods currently available. Shear wave velocity is fundamentally controlled by the number of grain-to-grain contacts per unit volume of material and by the effective stress across those contacts. In this study, three previously established empirical formulae are used to predict void ratio from velocity-depth data. Field data were acquired along a transect off the northern Californian coast across which water depth increased from 35 to 70 m and seafloor sediment type varied from sand to silty-sand, respectively. A towed seafloor sled device was used to collect shear wave refraction data, and a marked, systematic decrease in velocity was observed along the line, ranging from 35-70 m/s for the coarse, near-shore material to 25-40 m/s for the finer, offshore deposits. Void ratios predicted from these velocities were compared with data measured directly from box-core samples. Of the formulae used for prediction, two agree remarkably well with the control data. Both predicted and control values increase from 0.6-0.8 for the sandy material to 1.1-1.5 for the silty-sand. Thus, this study does not disprove the hypothesis set and demonstrates the potential of field shear wave velocity-depth data as a means of delineating spatial variation in void ratio for surficial marine sediments in a remote, nondestructive manner. 相似文献
14.
Hoi-Soo Jung Kap-Sik Jeong Yong-Shik Chu Sung-Hyun Park Ki-Hyune Kim 《Marine Georesources & Geotechnology》2001,19(3):181-195
Grain size and water content in box-core sediments from the Clarion-Clipperton fracture zone (C-C zone) in the northeast equatorial Pacific were analyzed in detail to understand the downcore variations across a hiatus between Quaternary and Tertiary layers. Grain-size distributions in the topmost core sediments show two modes: a coarse mode (peaked at 50 μm) and a fine mode (at 2-25 μm). The coarse mode disappears gradually with depth accompanied by the dissolution of siliceous fossil tests, whereas the fine mode coarsens due to the formation of authigenic minerals. Water content increases abruptly across a color boundary between an upper pale brown layer and a lower dark brown layer that is the hiatus between Quaternary and Tertiary layers. Abundant smectites and microvoid molds, which are created by the prolonged fossil dissolution in the underlying sediment, are attributed for the abrupt downcore variation of water content. Overall variations in grain size and water content in the topmost core sediments in the western C-C zone are possibly constrained by the dissolution of biogenic siliceous fossils. Variations in geotechnical properties related to these changes must be considered in the design of nodule collectors. 相似文献
15.
Shigehisa Nakamura 《Marine Geodesy》2001,24(1):27-33
This article concerns an interrelation between the sea levels and the western boundary flow near a tectonic boundary in a local zone in the Northwestern Pacific. In this zone, sea level variations at stations located on the coast facing the Pacific are studied to find the interrelation between variations of the Kurosio flow as an index of the distance of the flow axis off a specific coast. The result is discussed after data processing of the monthly means of the sea levels, and a notice is taken of variations caused by active crustal upheavals during a seismic event, a local earthquake. 相似文献
16.
Particulate samples were collected from the Changjiang river system during a flood period, in May 1997, and POC, stable isotope and lipids associated with particles were examined. Results showed the decrease (0.84% ～ 1.88%) of organic carbon content from the upper reaches to the estuary.δ13C values of particulate organic carbon was in the range of -24.9×10-3 to -26.6×10-3, which were close to the isotopic signature of continental C3 vegetation. Total particulate n-alkanes concentrations varied from 1.4 to 10.1μg/dm3,or from 23.7 to 107μg/g of total suspended matter. Fatty acids were present in all the samples, from 1.4 to 5.4μg/dm3, with saturated and unsaturated straight-chain and branched compounds in the carbon number range from C12 to C30. Both δ13C and the ratio of carbon content to nitrogen content indicate the predominance of terrestrial inputs (soil organic matter) among the particles. The biomarker approach has been used to identify the relative portion of terrigenous and autochthonous fraction in the particulate samples. The distribution of fatty acids suggests a striking phytoplanktonic and microbial signal in most particle samples. The terrestrial alkanes are used to estimate the contribution of terrestrial inputs along the mainstream. 相似文献
17.
Andrzej Chybicki 《Marine Geodesy》2018,41(1):1-23
Current trends of development of satellite derived bathymetry (SDB) models rely on applying calibration techniques including analytical approaches, neuro-fuzzy systems, regression optimization and others. In most of the cases, the SDB models are calibrated and verified for test sites, that provide favorable conditions for the remote derivation of bathymetry such as high water clarity, homogenous bottom type, low amount of sediment in the water and other factors. In this paper, a novel 3-dimensional geographical weighted regression (3GWR) SDB technique is presented, it binds together methods already presented in other studies, the geographically weighted local regression (GWR) model, with depth dependent inverse optimization. The proposed SDB model was calibrated and verified on a relatively difficult test site of the South Baltic near-shore areas with the use of multispectral observations acquired by a recently launched Sentinel-2 satellite observation system. By conducted experiments, it was shown that the proposed SDB model is capable of obtaining satisfactory results of RMSE ranging from 0.88 to 1.23[m] depending on the observation and can derive bathymetry for depths up to 12m. It was also shown, that the proposed approach may be used operationally, for instance, in the continuous assessment of temporal bathymetry changes, for areas important in the context of ensuring local maritime safety. 相似文献
18.
N. H. Khadge 《Marine Georesources & Geotechnology》2000,18(3):251-258
As a part of the environmental impact assessment studies, geotechnical properties of sediments were determined in the Central Indian Basin. The undrained shear strength and index properties of the siliceous sediments were determined on 20 box cores of uniform dimension collected from various locations in five preselected sites. The maximum core length encountered was 41 cm and most of the sediments were siliceous oozes consisting of radiolarian or diatomaceous tests. The shear strength measurements revealed that surface sediments deposited in recent times (0-10 cm) have a shear strength of 0-1 kPa; this value increases with depth, reaching 10 kPa at 40 cm deep. Older sediments have greater strength because of compaction. Water content varies in the wide range of 312-577% and decreases with depth. The clay minerals such as smectite and illite are dominant and show some control over water content. Wet density, specific gravity, and porosity do not indicate any notable variation with depth, thereby indicating a uniform, slow rate of sedimentation. The average porosity of sediments is 90.2%, specific gravity 2.18, and wet bulk density 1.12 g/cm 3 . Sediments exhibit medium to high plasticity characteristics, with the average plasticity index varying between 105% and 136%. Preliminary studies on postdisturbance samples showed an increase in natural water content and a decrease in undrained shear strength of sediments in the top 10- to 15-cm layer. 相似文献
19.
An Improved Calibration of Satellite Altimetric Heights Using Tide Gauge Sea Levels with Adjustment for Land Motion 总被引：2，自引：0，他引：2
Gary T. Mitchum 《Marine Geodesy》2000,23(3):145-166
Several major improvements to an existing method for calibrating satellite altimeters using tide gauge data are described. The calibration is in the sense of monitoring and correcting temporal drift in the altimetric time series, which is essential in efforts to use the altimetric data for especially demanding applications. Examples include the determination of the rate of change of global mean sea level and the study of the relatively subtle, but climatically important, decadal variations in basin scale sea levels. The improvements are to the method described by Mitchum (1998a), and the modifications are of two basic types. First, since the method depends on the cancellation of true ocean signals by differencing the altimetric data from the tide gauge sea level time series, improvements are made that produce a more complete removal of the ocean signals that comprise the noise for the altimetric drift estimation problem. Second, a major error source in the tide gauge data, namely land motion, is explicitly addressed and corrections are developed that incorporate space-based geodetic data (continuous GPS and DORIS measurements). The long-term solution, having such geodetic measurements available at all the tide gauges, is not yet a reality, so an interim solution is developed. The improved method is applied to the TOPEX altimetric data. The Side A data (August 1992?February 1999) are found to have a linear drift component of 0.55 + / 0.39 mm/yr, but there is also a significant quadratic component to the drift that is presently unexplained. The TOPEX Side B altimeter is estimated to be biased by 7.0 + / 0.7 mm relative to the Side A altimeter based on an analysis of the first 350 days of Side B data. 相似文献
20.
Extreme sea levels associated with severe cyclonic storms are common occurrences along the east coast of India. The coastal districts of Orissa have experienced major surges in the past. The recent Paradip super cyclone is one of the most severe cyclones, causing extensive damage to property and loss of lives. Extreme sea levels are major causes for coastal flooding in this region. Damages can be minimized if the extreme sea levels are forecast well in advance. In the present study, we develop a location specific, fine resolution model for the Orissa coast on the lines similar to that of IIT-D storm surge model (Dube et al. 1994). The model runs on a personal computer. The bathymetry for the model is extracted from very fine resolution naval hydrographic charts for the region extending from the south of Orissa to south of West Bengal. A simple drying scheme has also been included in the model in order to avoid the exposure of land near the coast due to strong negative sea surface elevations. An attempt was made in this study to simulate extreme sea levels along the Orissa coast using the data of past severe cyclones. The model results reported in the present study are in good agreement with available observations or estimates. 相似文献