共查询到19条相似文献，搜索用时 125 毫秒
1.
Study on Wave Dissipation of the Structure Combined by Baffle and Submerged Breakwater 总被引：1，自引：0，他引：1
This paper proposes a structure combined by baffle and submerged breakwater (abbreviated to SCBSB in the following texts). Such a combined structure is conducive to the water exchange in the harbor, and has strong capability on wave dissipation. Our paper focuses on the discussion of two typical structures, i.e., the submerged baffle and rectangular breakwater combined with the upper baffle respectively, which are named as SCBSB1 and SCBSB2 for short. The eigenfunction method corrected by experimental results is used to investigate the wave dissipation characteristics. It shows that the calculated results agree well with the experimental data and the minimum value of the wave transmission coefficient can be obtained when the distance between the front and rear structures is from 1/4 to 1/2 of the incident wave length. 相似文献
2.
The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method. 相似文献
3.
A series of physical tests are conducted to examine the characteristics of the wave loading exerted on circular-front breakwaters by regular waves. It is found that the wave trough instead of wave crest plays a major role in the failure of submerged circular caissons due to seaward sliding. The difference in the behavior of seaward and shoreward horizontal wave forces is explained based on the variations of dynamic pressure with wave parameters. A wave load model is proposed based on a modified first-order solution for the dynamic pressure on submerged circular-front caissons under a wave trough. This wave loading model is very useful for engineering design. Further studies are needed to include model uncertainties in the reliability assessment of the breakwater. 相似文献
4.
赵耀南 《海洋学报(英文版)》1983,2(1):155-164
The wave period will strongly affect the wave load, and the prevailing method of marine structure design, as adopted nowadays, will not obtain the requisite maximum wave load on structure. This paper presents a new method to determine the design wave that is conditioned by the principle of equal return period by selecting a set of the worst wave height and period which would produce the maximum wave load as a design wave. In this way, not onlythe given design criterion keeps constant but also the design load in the worst case can be obtained. 相似文献
5.
The scaled boundary finite element method （SBFEM） is a novel semi-analytical technique combining the advantage of the finite element method （FEM） and the boundary element method （BEM） with its unique properties. In this paper, the SBFEM is used for computing wave passing submerged breakwaters, and the reflection coeffcient and transmission coefficient are given for the case of wave passing by a rectangular submerged breakwater, a rigid submerged barrier breakwater and a trapezium submerged breakwater in a constant water depth. The results are compared with the analytical solution and experimental results. Good agreement is obtained. Through comparison with the results using the dual boundary element method （DBEM）, it is found that the SBFEM can obtain higher accuracy with fewer elements. Many submerged breakwaters with different dimensions are computed by the SBFEM, and the changing character of the reflection coeffcient and the transmission coefficient are given in the current study. 相似文献
6.
JIA Donghua
Engineer The First Design Institute of Navigation Engineering Ministry of Communications of China Tianjin P. R. China. 《中国海洋工程》1999,(1)
—The present study investigates the interaction of steep waves with semi-circular breakwaterwith the complex plane＇s Cauchy boundary integral theorem.The boundary integral method is used totransform the calculation in fluid domain into its boundary alone.In the calculation the computation do-main is moved with the propagation of waves.A numerical solution is obtained for incident Stokes wavespassing the submerged obstacles.This method has been extended to the calculation of wave run-up on aslope for estimating wave overtopping. 相似文献
7.
Interstitial flows in breakwater cores and seabeds are a key consideration in coastal and marine engineering designs and have a direct impact on their structural safety.In this paper,a unified fully coupled model for wave?permeable breakwater?porous seabed interactions is built based on an improved N?S equation.A numerical wave flume is constructed,and numerical studies are carried out by applying the finite difference method.In combination with a physical model test,the accuracy of the numerical simulation results is verified by comparing the calculated and measured values of wave height at measurement points and the seepage pressure within the breakwater and seabed.On this basis,the characteristics of the surrounding wave field and the internal flow field of the pore structure,as well as the evolution process of the fluctuating pore water pressure inside the breakwater and seabed,are further analyzed.The spatial distribution of the maximum fluctuating pore water pressure in the breakwater is compared between two cases by considering whether the seabed is permeable,and then the effect of seabed permeability on the dynamic pore water pressure in the breakwater is clarified.This study attempts to provide a reference for breakwater design and the protection of nearby seabeds. 相似文献
8.
In this study,we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall.Modified time-dependent mild-slope equations,which involve parameters of the porous medium,were used to calculate the wave height transformation and the mean water level change around a submerged breakwater.The numerical solution is verified with experimental data.The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall.In contrast to cases without a seawall,the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall.Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater.We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up. 相似文献
9.
This paper discusses some previous, and presents some new experimental results on wave transmission over submerged breakwaters. The objective of this study is to evaluate wave transmission coefficient and develop a two-dimensional （2D） model as an improvement to the existing wave transmission coefficient models. Factors which affect wave transmission over stbmerged breakwaters are discussed through a series of laboratory experiments. Basic recommendations for evaluation and design of submerged rubble-monud breakwaters are presented. From the test results, a calculation formula of wave transmission coefficient is proposed. 相似文献
10.
PAN Shaohua XIAQiyi LIN Shiqing XU Lunhuan
Professor Dept. of Coastal Engineering College of Harbour Waterway Coastal Engineering Hohai University Nanjing P. R. China.
Senior Engineer Dept. of Coastal Engineering College of Harbour Waterway Coastal Engineering Hohai University Nanjing P. R. China.
Senior Engineer Fujian Province Ports Shipping Administration Bureau Fuzhou P. R. China. 《中国海洋工程》1999,(2)
Test studies on the wave pressure on a breakwater pier show that the influence of transmissivewave pressure on the outside wall of the breakwater pier is considerable,when the width of the pier is notvery large.The variations of transmissive wave pressure on the breakwater pier with different widths arecompared and the relationship is obtained between relative transmitting distance b/L and wave pressurereduction factor K,which may be used in the design of similar breakwater piers. 相似文献
11.
12.
基于非静压数值计算模型,本文系统研究了聚焦波作用下透水潜堤的消波特性,通过设置合理的计算工况,详细分析了波高、堤顶水深、谱峰周期、孔隙率以及堤顶宽度5种因素对透水潜堤消波特性的影响。与此同时,本文将透水潜堤的计算结果同不透水潜堤的计算结果进行了对比分析。计算结果表明:透水潜堤对聚焦波的消减作用要强于不透水潜堤,从而说明,透水潜堤能更有效地降低畸形波对海岸基础设施的影响;波高和堤顶水深是影响潜堤消波特性的重要因素,随入射波高增加、堤顶水深减小,透水潜堤对波浪的消减作用逐渐增强。透水潜堤对长周期波浪的消波效果较差。在本文考虑的孔隙率范围内,孔隙率越大,透水潜堤消波效果越好;当孔隙率为0.4,堤顶宽度为0.612 5 m时,透水潜堤可消减54%的入射波能,比不透水潜堤对入射波能的消减增加36.1%。本文研究结果可为进一步认识透水潜堤的消波特性和海岸防护工程设计提供相应的参考。 相似文献
13.
为了研究波浪非线性对爬高的影响,解决防波堤等工程设计的实际问题,通过对数学模型试验、物理模型试验、规范公式得到的防波堤波浪爬高对比分析,分析了非线性主要影响参数厄塞尔数、相对水深和波陡对波浪爬高的影响规律,指出规范公式计算时存在的缺陷,并对其计算公式、适用范围进行修正、拟合,得到了强非线性规则波浪爬高的计算方法,可适用于斜坡堤断面的波浪爬高计算,与物理模型试验和数学模型试验结果对比表明,新的波浪爬高计算公式具有较好的计算精度,研究结果可为防波堤等实际工程设计提供重要参考。 相似文献
14.
通过正向与斜向波浪对半圆型防波堤(不开孔出水堤)的实验研究,给出了其水力特性及单位堤长所受的无因次水平波浪力、竖向波浪力和波浪浮托力随各主要影响因素的变化规律,特别指出了斜向波浪力可大于正向波浪力及水平波浪力中波谷作用大于波峰作用发生的条件。 相似文献
15.
直立式防波堤堤头在斜向波浪作用下波浪力的计算在现行的技术规范中尚属空白。通过物理模型试验给出了堤头结构设计所需的波压分布图，指出了波浪入射方向和地形对堤头所受波浪力的贡献有时可以超过波高和波周期，根据现行规范按波浪正向入射计算堤头所受的波浪力偏于安全。 相似文献
16.
在印度洋、大西洋沿岸，海岸工程设计波浪周期多在14 s以上，具有显著的中长周期波特征。通过以往工程项目的试验结果发现中长周期波下，规范计算的斜坡堤胸墙波浪力明显小于试验结果。因此，通过系列物理模型试验研究了中长周期波下的斜坡堤胸墙波浪力。分析斜坡坡度、肩台宽度和波浪条件对胸墙波浪力的影响。通过将试验结果与我国现有规范中的经验公式计算所得结果进行对比，发现规范更适用于胸墙底淹没的情况，而对于肩台出水情况，规范计算结果小于试验结果。由此提出了一种新的波浪力计算方法，计算准确度得到明显提高。 相似文献
17.
18.
19.
Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate 总被引：1，自引：0，他引：1
This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity. 相似文献