共查询到18条相似文献，搜索用时 93 毫秒
1.
南海三海区海底沉积物物理性质及声学特性 总被引：3，自引：2，他引：3
海底是影响海洋声场极其重要的环境因素。了解海底沉积物的物理特性以及它与声学参数的关系,对于海洋声场分析,声纳作用距离的预报,水声设备在海洋中检测和应用等等都是必不可少的。出于实用的需要,我们曾于夏季在二十天时间内对南海三个海区水声环境场进行考察,其中海底沉积物的物理特性和声学特性是主要内容之一。分别标称为Ⅰ、Ⅱ、Ⅲ的三个海区同在一个海域,都处于纬度18°40N＇上下,距离海岸Ⅰ海区约5n mile,Ⅱ海区50n mile,Ⅲ海区110n mile左右,考察范围,每个海区约200 相似文献
2.
为研究深海海底沉积物声学特性与物理性质相关关系,于2016年11月在实验室对水深3164～5 592 m的菲律宾海深海海底沉积物柱状样品的声学特性进行测量,获取了沉积物声速、声速比、声阻抗、声阻抗指数等声学特性参数。结合沉积物的孔隙度和密度等物理性质参数,分析了海底沉积物声速、声速比、声阻抗、声阻抗指数与孔隙度、密度的相关关系,建立了该海域海底沉积物声学特性回归方程。研究结果表明:研究区深海数据与浅海回归方程符合度较差,与深海回归方程符合度较好;Hamilton校正方法有助于修正实验室测量引起的温度和压力误差,声速比与Hamilton方程符合度比声速好;声阻抗和声阻抗指数与物理性质参数的相关性优于声速和声速比。此外,研究认为由于海底沉积物的沉积环境较为复杂,其声学特性回归方程存在差异。由于上述差异的存在,在使用基于不同海域数据建立的回归方程进行海底沉积物声学特性预测时,应加以区别对待。该研究丰富了深海海底沉积物声学数据,对促进深海海底沉积物声学深入研究具有一定的借鉴意义。 相似文献
3.
4.
海水—沉积物声速结构模式 总被引：4，自引：1，他引：4
给出三种海水－沉积物声速结构模式作建立海洋地声学模型的初模。读者论坛了声与海水，声与海底的相互作用；从几方面讨论了建立声速结构模式的可能性和现实性，以及指出沉积物声学物理研究在海洋工程、水声物理方面应用的意义。 相似文献
5.
6.
7.
海底沉积物声衰减研究现状及展望 总被引：4，自引：0，他引：4
根据近年来海底沉积物声学物理研究发展的态势,介绍了与研究声衰减有关的海底沉积物样品采集装置和海洋沉积物声速结构模式,综合解析多种对海底沉积物声衰减等声学特性研究方法,并做出较为详细地比较和讨论,提出对海底沉积物声衰减研究在满足科研要求的同时也应符合国家标准和要求。同时,指出了研究海洋沉积物声衰减的必要性和重要性,强调了对海底沉积物声衰减研究的科学意义和应用意义。 相似文献
8.
本文通过对南海海底沉积物样品的声学物理参数和沉积粒度特征统计分析，发现了高、低含砂量沉积物的声学物理特征存在明显差异，建立了海底沉积物的含砂量与压缩波速度、孔隙度、含水量和密度等经验公式，分析了含砂量变化与沉积物的体积压缩模量和密度变化的关系，从声速理论基础上阐明了含砂量变化引起沉积物压缩波速度变化的内在原因是含砂量变化引起了体积压缩模量和密度发生了变化，说明了含砂量增大引起沉积物压缩波速度增大的内在原因是含砂量增大引起了体积压缩模量变化量大于密度变化量，从而在数据统计和理论分析结合基础上，论证了含砂量是影响海底沉积物压缩波速度的重要因素之一。这一研究对声学方法反演海底沉积物粒度参数和沉积物类型、地声参数转换模型的建立，以及对水声反演海底和海底资源勘探等方面都具有重要理论意义和应用价值。 相似文献
9.
中国东南近海海底沉积物声学物理性质及其相关关系 总被引：17，自引：3，他引：17
在获得的数据资料基础上,发现了中国东南近海海底沉积物声学物理参数的平面分布规律,通过对这些参数的回归分析以及对声速和沉积物密度的估计,建立了经验公式。结果显示,中国东南近海海底沉积物的基本声学物理特性如下:沉积物类型多样而且复杂,从黏土到砂砾有13个颗粒组分组合;沉积物物理力学参数变化范围较大;沉积物声学性质相对于附近海域的数据变化范围更大。这些都与海底沉积环境、沉积物来源、沉积条件和沉积作用过程有关。该项研究有助于建立海底地声模型及开展应用。 相似文献
10.
海底沉积物声学原位测量方法与南海天然气水合物勘探的应用研究 总被引：1，自引：0，他引：1
研究原位测量技术中表层沉积物声学原位测量技术、声波测井技术和OBS测量技术的特点和差异,得出3种技术的分辨率虽然依次降低,但测量尺度依次增大,可以应用不同深度和结构层序的海底沉积物声学物理性质研究.3种原位测量技术基于海底原位状态,可以测得海底沉积物的纵波和横波特性,通过比较纵波特性、纵横波速比和计算泊松比可以提高沉积... 相似文献
11.
Jingqiang Wang Baohua Liu Guangming Kan Zhiwen Sun Xiangmei Meng 《Marine Georesources & Geotechnology》2018,36(5):515-521
The mechanical structure, the function modules, the working principles, and a sea trial of the newly developed ballast in situ sediment acoustic measurement system are reported in this study. The system relies on its own weight to insert transducers into seafloor sediments and can accurately measure the penetration depth using a specially designed mechanism. The system comprises of an underwater position monitoring and working status judgment module and has two operation modes: self-contained measurement and real-time visualization. The designed maximum working water depth of the system is 3,000?m, and the maximum measured depth of seafloor sediment is 0.8?m. The system has one transmitting transducer with the transmitting frequency band of 20–35?kHz and three receiving transducers. The in situ acoustic measurement system was tested at 15 stations in the northern South China Sea, and repeated measurements in seawater demonstrated good working performance. Comparison with predictions from empirical equations indicated that the measured speed of sound and attenuation fell within the predicted range and that the in situ measured data were reliable. 相似文献
12.
Lei Sun Xiangmei Meng Guanbao Li Guangming Kan Baohua Liu 《Marine Georesources & Geotechnology》2020,38(5):595-603
AbstractThe high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range. 相似文献
13.
原位测量技术在黄海沉积声学调查中的应用 总被引：8，自引：3，他引：8
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。 相似文献
14.
15.
Jianping Zhou Hongxing Li Xianglong Jin Lei Qiu Guoyin Zhang 《Marine Georesources & Geotechnology》2013,31(5):633-640
AbstractThe superficial marine sediment is an important boundary of ocean acoustic propagation. So, the acoustic property of seafloor surface is always research hotspot. The acoustic property of sediment is affected by temperature and pressure which is not considered by conventional lab acoustic measurement. A new type of system, called “Small-scale Geo-acoustic Physical Model Pilot System” (SGPMP) has been developed. The system measures geo-acoustic property of sediment under specific temperature, pressure and frequency conditions which can be controlled conveniently and accurately. The components, structure, measurement principle, error analysis and application example of this system are introduced in this article. As a laboratory platform, the system makes it convenient for us to study the relationship between the temperature, pressure, frequency and acoustic properties of marine sediment. 相似文献
16.
本文阐述了对海底沉积物样品在应力-应变过程中进行同步声学测量的实验工具和方法，分析了采自南海45个站位的海底沉积物样品的实验数据资料，结果表明，沉积物颗粒越粗、孔隙越小、无侧限抗压强度越大，声速越高。沉积物样品在受力应变过程中，声速具有明显的随应力而变化的特征。进一步探讨了不同应变阶段沉积物的声学特征以及应力所导致沉积物微结构变化对其声速的影响过程，这一研究将在石油地质测井和海底工程基底稳定性评价等方面具有重要的应用意义。 相似文献
17.
Bin Lv Guo-liang Qi Guan-bao Li Guang-ming Kan Jing-qiang Wang Jie Liu 《Marine Georesources & Geotechnology》2020,38(3):363-373
AbstractA new kind of visual acoustic measurement system was developed to obtain the acoustic characteristics of seabed sediment and the working state of in situ measuring equipment in real time. The control unit of the system structure is mainly made up of the underwater control unit and the deck control unit. In comparison with similar traditional systems, the system can transmit the working video image, the measured acoustic data and the waveform synchronous from the underwater control equipment to the deck control unit through the connecting cable. Apart from self-contained in situ measurement, the working modes of it include visual online real-time control. In order to guarantee the stability and measurement precision of the video control system, the process control of in situ measurement was strictly tested in the experimental tank. In 2017, sea trials of the in situ measurement system was carried out in the South China Sea. In the process, data related to measurement, including the acoustic velocity and attenuation coefficient of the seabed sediment, were obtained as well. The results from sea trials show that the control process of the visual system is intuitive, reliable and accurate, and therefore it can be popularized and applied. 相似文献
18.
声波在海底界面的反射和透射是海底散射、海底混响、海底目标探测的重要问题。利用Biot多孔介质声传播理论对声波在水-多孔海底界面上的反射和透射进行了分析,具体给出反射声波的反射系数,3种透射声波的透射系数以及声能透射系数随入射波入射角和频率(10~40 kHz)的变化关系,分析了各种透射波对透射声能的贡献。多孔海底介质参数分别采用Stoll和Chotiros给出的2组参数进行理论计算。 相似文献