共查询到19条相似文献，搜索用时 125 毫秒
1.
2.
利用多代卫星测高数据计算中国近海及邻域重力异常 总被引：1，自引：0，他引：1
为提高海洋重力场数据的精度和空间分辨率,联合Jason-1/2、T/P、Envisat、ERS-1/2、Geosat等多代卫星测高数据计算中国近海及邻域(0°~42°N,100°~140°E)2′×2′重力异常。对卫星测高数据分别进行共线处理和自交叉点平差,并以T/P卫星测高数据为基准进行多星数据联合平差,有效削弱了卫星测高数据的时变影响和不协调性;利用逆Vening-Meinesz公式计算重力异常,与船测重力相比,均方根误差为5.4 mgal。结果表明,通过引入高精度的卫星测高数据,结合多项平差处理手段,提高了海洋重力异常的计算精度。 相似文献
3.
联合Jason-1/2、T/P、Envisat、ERS-1/2、Geosat等多代卫星测高数据计算中国近海及邻域（0°~42°N,100°~140°E）2′×2′重力异常。对卫星测高数据分别进行共线处理和自交叉点平差,并以T/P卫星测高数据为基准进行多星数据联合平差,有效削弱了卫星测高数据的时变影响和不协调性;利用逆Vening-Meinesz公式计算重力异常,与船测重力相比,均方根误差为5.4mGal。结果表明,通过引入高精度的卫星测高数据,结合多项平差处理手段,提高了海洋重力异常的计算精度。 相似文献
4.
联合HY-2A、Geosat、ERS1/2、Envisat、T/P、Jason1/2等多颗测高卫星,通过共线处理和交叉点平差削弱海面时变效应和径向轨道误差等影响,以Jason-1测高卫星作为参考,对多代测高卫星进行基准统一,消除测高数据的不一致性,基于全球EGM2008重力场模型,采用移去恢复技术和逆Vening-Meinesz公式反演中国南海(0°~23°N,103°~120°E)2'×2'重力异常,与船测重力数据比较,均方根误差为4.9m Gal。 相似文献
5.
测高卫星径向轨道误差是影响测高数据精度的最主要因紊之一。为了充分利用测高数据中所含的地球物理信息,分析径向轨道误差对卫星测高数据处理结果的影响,更好地了解径向误差的空域分布模式,鉴别各种平差方法的有效性,对径向轨道误差在交叉点平差时的可观测性有一个较为清晰而明确的认识,本文据文献[1]、[2]中的理论推导,对测高卫星径向误差的频域及空域特征作了进一步的分析,并附以实例计算,得出了一些有益的结论。 相似文献
6.
粗差探测是评价船载重力测量数据成果质量的重要内容。卫星测高反演重力场技术提供了海域全覆盖的重力场数值模型,其精度水平已满足探测船载重力测量数据粗差的精度要求。以卫星测高反演重力场模型为基础,提出了基于窗口移动中误差模型探测船载重力测量粗差的数据处理方法,其基本思路是:以卫星测高反演重力场数值模型作为背景场,计算船载重力测点处的测高重力值的差值,以差值作为输入量,等权构建中误差背景场,以开窗中误差背景场作为参考,按照平差思想探测船载重力测量数据的粗差。实验结果表明,依据本文方法能有效探测船载重力测量数据的粗差。 相似文献
7.
8.
9.
探讨了卫星测高数据处理的共线秩亏平差算法，推求了消除秩亏的附加条件系数矩阵。用Topex测高数据对轨道误差模型进行了验证。 相似文献
10.
11.
We present an improved crossover adjustment procedure to determine mean sea surface height using TOPEX, 35-day repeat phase ERS-1, Geosat, and 168-day repeat phase ERS-1 satellite altimeter data. The mean sea surface frame defined by the TOPEX data is imposed as certain constraints in our crossover adjustment procedure rather than held fixed as in some other procedures. The new procedure is discussed in detail. Equations are developed to incorporate the a priori information of Topex data as well as other satellite altimeter data. The numerical computation result shows that the rms crossover discrepancies are reduced by an order of 1 cm when the Topex data is not fixed. Furthermore, the computed mean sea surface is less noisy and more realistic than that computed by the traditional procedure. 相似文献
12.
We present an improved crossover adjustment procedure to determine mean sea surface height using TOPEX, 35-day repeat phase ERS-1, Geosat, and 168-day repeat phase ERS-1 satellite altimeter data. The mean sea surface frame defined by the TOPEX data is imposed as certain constraints in our crossover adjustment procedure rather than held fixed as in some other procedures. The new procedure is discussed in detail. Equations are developed to incorporate the a priori information of Topex data as well as other satellite altimeter data. The numerical computation result shows that the rms crossover discrepancies are reduced by an order of 1 cm when the Topex data is not fixed. Furthermore, the computed mean sea surface is less noisy and more realistic than that computed by the traditional procedure. 相似文献
13.
GEOSAT卫星遥感资料研究南海海面动力高度场和地转流场 总被引：10，自引：1，他引：9
利用GEOSAT卫星在1987年和1988年执行ERM任务的雷达高度计资料来分析获取南海海面动力高度偏差的季节分布.根据卫星轨道误差和海域的特点,提出了适用于内海及边缘海域的二维共线轨道校正法,由此方法而得出的南海海面动力高度偏差的季节分布表明,南海表层流场在夏季总的环流形势是反气旋式环流,而冬季是气旋式环流.分析的结果同海上常规调查资料的分析结果相比较表明,在海流季节变化信号较强的海区(如南海中部和北部海区),利用高度计资料能很好地反映该海区的海流季节变化特征. 相似文献
14.
One possible technique to validate the observations of altimeter missions is the comparison with sea-surface heights measured by tide gauges. In our investigation, we compared observations of the two tide gauge stations, Sassnitz and Warnemünde, which are located at the southern coast of the Baltic Sea, with sea-surface heights obtained from the altimeter missions Geosat, ERS-1, ERS-2, and TOPEX/Poseidon. For this purpose, the compared sea-surface heights were related to a common reference system and extrapolated to a common location. GPS observations, leveling data, regional geoid information, sea-surface topography, and postglacial rebound were included in the analysis. Considering the uncertainties of all model components, a more reliable estimation of the error budget (source, type, and magnitude of the errors) was performed. The obtained absolute altimeter biases are (-243 - 32) mm for Geosat, (467 - 19) mm for ERS-1, (76 - 19) mm for ERS-2, and (13 - 18) mm for TOPEX. 相似文献
15.
Bathymetric, gravity, and magnetic data from Antarctic expeditions with RV POLARSTERN and satellite altimeter data from the Geosat Geodetic Mission are analysed using methods from geostatistics and geophysical inverse theory.The Explora Escarpment represents the edge between the Antarctic Continental Shelf and the Weddell Abyssal Plain. It is an important link in the reconstruction of Gondwana breakup, but a feature as large as the 2000 m deep Wegener Canyon was only discovered in 1984, when extensive bathymetric, gravimetric, and magnetic surveys with RV POLARSTERN began.Geostatistics, the theory of regionalized variables, is applied to integrate dense surveys of Wegener Canyon and sparse observations in adjacent areas into maps with full coverage of the 230 km by 330 km area at 10°–20° W/70°–72° S. The resultant highresolution bathymetric and gravity maps reveal detailed structures of the Explora Escarpment. Using geophysical inversion, the gravity terrain effect is calculated. Satellite data are used for their better coverage, but have much lower resolution. Nevertheless, the structures of Wegener Canyon and other more prominent features appear with surprisingly good correlation also in the Geosat altimeter data. While it was initially supposed that Wegener Canyon is purely an erosional structure, the magnetic map now provides evidence of the canyon's tectonic origin. 相似文献
16.
The variational assimilation method has been examined for ability of reconstructing mesoscale features in altimeter data using a simple dynamic model. A one-dimensional, two-layer Rossby wave model in a cross-track channel has been chosen. The simulated data are constructed from a theoretical solution, which is composed of any combination of two normal vertical (barotropic and baroclinic) modes. The data are collected along tracks and with repeat periods similar to those of the Geosat altimeter. The phase space of control variables is composed of initial and boundary conditions. A cost function is defined to measure differences between the simulated data and the model solution. Regularization (smoothing) terms are also included in the cost function in the form of secon-order spatial and time derivatives of the solution. In this paper, two potential problems existing in the altimeter data assimilation are addressed: one is low cross-track resolution, and the other is vertical projection of the data measured at the sea surface. A succesful metho is developed for reconstructing Rossby waves with wavelengths as short as twice the track intervals for any combination of two vertical modes. A key component to efficient assimilation is a preparation step prior to the actual variational assimilation: a uniform ratio of pressure amplitudes in the two layers is included as an optimization parameter. Starting with the first guess from the preparation step, the variational method is carried out based on adjoint equations without such constraint. Separation of the control variables into the two subsets of the initial and the boundary conditions is found useful. Characteristics of the Hessian matrix are related to the performance of this technique. The method developed for the linear system implies steps to be included in data assimilation for nonlinear meanders and eddies in a major current system as well. 相似文献
17.
To provide easy access to the large number of Seastat and Geosat altimeter observations collected over the last decade, we have plotted these satellite altimeter profiles as overlays to the General Bathymetric Chart of the Oceans (GEBCO). Each of the 32 overlays displays along-track gravity anomalies for either ascending (southeast to northwest) or descending (northeast to southwest) altimeter passes. Where Seasat and Geosat profiles coincide, only the more accurate Geosat profiles were plotted. In poorly charted southern ocean areas, satellite altimeter profiles reveal many previously undetected features of the seafloor. 相似文献
18.
19.
Michael P. Stewart Will E. Featherstone Jonathan F. Kirby Mark Dumville 《Marine Geodesy》2013,36(4):319-330
Sea surface height profiles derived from 2‐year, repeat track, Geosat altimeter data have been compared with a regional gravimetric geoid in the western North Sea, computed using a geopotential model and terrestrial gravity data. The comparison encompasses 18 Geosat profiles covering a 750 × 850 km area of the North Sea. After a second‐order polynomial was used to model the long‐wavelength differences which cannot be clearly separated over an area of this size, results show agreement to better than ±3 cm for wavelengths between approximately 20 and 750 km. In regions where terrestrial gravity data were not available to improve the geoid, similar comparisons with the OSU91A geopotential model alone show differences of up to ±6 cm. This illustrates the importance of incorporating local gravity data in regional geoid computations, and partly validates the regional gravimetric geoid solution and Geosat sea surface profiles in the western North Sea. It is concluded that, in marine areas where the sea surface topography is known to be small in magnitude, Geosat sea surface profiles can act as an independent control on gravimetric geoids in the medium‐wavelength range. 相似文献