共查询到20条相似文献，搜索用时 93 毫秒
1.
An optimal evaluation of adaptive beamforming techniques in a reverberation-limited shallow water environment is presented. A comprehensive simulation, using the sonar simulation toolset (SST) software in conjunction with the generic sonar model (GSRT) software, is used to create realistic beam data complete with target, noise, and reverberation. Adaptive beamforming techniques from the recursive least squares (RLS) family are applied to enhance detection performance via interference rejection. Two techniques are considered: linearly constrained beamforming using the minimum variance distortionless response (MVOR) beamformer and constrained adaptive noise cancelling (ANC) using the joint process least squares lattice (JPLSL) algorithm. Target detection trials, summarized in the form of receiver operator characteristics (ROC), are used to evaluate performance of the two adaptive beamformers. Results demonstrate mixed performance in reverberation-limited shallow water environments 相似文献
2.
Reverberation rejection with a dual-line towed array 总被引：1，自引：0，他引：1
Low-frequency bottom reverberation from explosive sources was measured with a dual-line horizontal towed array during a 1991 system engineering trial. The receiver's parallel line arrays were processed coherently in order to unambiguously resolve the reverberation field in azimuth. Initial beamforming that assumed a straight-and-parallel array configuration led to poor or erroneous ambiguity resolution, suggesting the system was deformed significantly from the assumed shape. In the absence of reliable shape measurement data, the array shape was deduced acoustically using tow ship signals and the direct blast of an explosive source. The estimated shape was then used in a shape-compensated beamformer to produce azimuthally unambiguous estimates of the reverberation field. Backlobe rejection of more than 20 dB was attained for both direct blast and distant reverberation energy 相似文献
3.
Passive sonar systems that localize broadband sources of acoustic energy estimate the difference in arrival times (or time delays) of an acoustic wavefront at spatially separated hydrophones, The output amplitudes from a given pair of hydrophones are cross-correlated, and an estimate of the time delay is given by the time lag that maximizes the cross correlation function. Often the time-delay estimates are corrupted by the presence of noise. By replacing each of the omnidirectional hydrophones with an array of hydrophones, and then cross-correlating the beamformed outputs of the arrays, the author shows that the effect of noise on the time-delay estimation process is reduced greatly. Both conventional and adaptive beamforming methods are implemented in the frequency domain and the advantages of array beamforming (prior to cross-correlation) are highlighted using both simulated and real noise-field data. Further improvement in the performance of the broadband cross-correlation processor occurs when various prefiltering algorithms are invoked 相似文献
4.
Various approaches to the beamforming of data from large aperture vertical line arrays are investigated. Attention is focused on the conventional beamforming problem where the angular power spectrum is estimated, in this case by the adaptive minimum variance processor. The data to be processed are 200 Hz CW transmissions collected at sea by a 900 m vertical line array with 120 equally spaced sensors. Correlated multipath arrivals result in signal cancellation for the adaptive processor, and spatial smoothing techniques must be used prior to beamforming. The processing of subapertures is proposed. Full aperture and subaperture processing techniques are used on the 200 Hz data. Multipath arrivals are found to illuminate only parts of the array, thus indicating that the wavefield can be highly inhomogeneous with depth 相似文献
5.
A method is described by which reverberation data gathered on a cardioid array can be processed to produce a 'scatterer map' of an area. Such a map shows the locations of strong seabed scatterers and gives a qualitative estimate of their strength. The method cannot give absolute values for scattering strength but its output is nonetheless useful in describing the locations of strong scatterers in an area. Low-Frequency Active Sonar (LFAS) data gathered on the Malta Plateau are presented and the physical causes of observed strong scatterers are described, along with an assessment of the degree of certainty to which these causes are known. 相似文献
6.
The effects of both small perturbations and large deformations to the array's shape on both conventional and adaptive beamformers are shown for two frequencies: the spatial Nyquist frequency (or design frequency) of the array and a frequency about three times greater. Large shape deformations lead to a decrease in the conventional beamformer's output power for a beam steered in the direction of the signal source, together with an increase in the sidelobe levels (or secondary maxima), while small perturbations in the array shape have little effect. Signal suppression is observed to be far greater for the adaptive beamformer because it is very sensitive to system errors. The imposition of a weight norm constraint on the adaptive beamformer reduces the signal suppression only for small shape perturbations array shape estimation techniques are needed to reduce signal suppression for large shape deformations. The adverse effects of a nonlinear array shape on both conventional and adaptive beamforming are shown to be substantially reduced by applying techniques that estimate the coordinates of the hydrophones prior to beamforming 相似文献
7.
Controlling the resolution in adaptive beamformers is often crucial. A simple method that works for both narrow-band and broad-band arrays is presented. This method is based on the normalized leaky LMS algorithm in conjunction with a generalized sidelobe canceller (GSC) structure, where the GSC is designed using a spatial filtering approach. In essence, the suppression of the spatial filters and the implicit noise of the leaky LMS algorithm together determine the adaptive beamformer. Analytical expressions are given for the Wiener filters and the output spectrum versus frequency and point source location. These expressions are employed in the design specification of the spatial filters and to obtain conditions for a controlled quiescent beamformer response. Simulation results are presented to illustrate the behavior of the array 相似文献
8.
Gerstoft P. Hodgkiss W.S. Kuperman W.A. Heechun Song Siderius M. Nielsen P.L. 《Oceanic Engineering, IEEE Journal of》2003,28(1):44-54
During maneuvering, towed array beamforming degrades if a straight array is assumed. This is especially true for high-resolution adaptive beamforming. It is experimentally demonstrated that adaptive beamforming is feasible on a turning array, provided that array shape is estimated. The array shape can be inferred solely from the coordinates of the tow vessel's Global Positioning System (GPS) without any instrumentation in the array. Based on estimated array shape from the GPS, both the conventional beamformer and the white noise constrained (WNC) adaptive beamformer are shown to track the source well during a turn. When calculating the weight vector in the WNC approach, a matrix inversion of the cross-spectral density matrix is involved. This matrix inversion can be stabilized by averaging the cross-spectral density matrix over neighboring frequencies. The proposed algorithms have been tested on real data with the tow-vessel making 45/spl deg/ turns with a 500-m curvature radius. While turning, the improvement in performance over the assumption of a straight array geometry was up to 5 dB for the conventional beamformer and considerably larger for the WNC adaptive beamformer. 相似文献
9.
Increasing the number of hydrophones in an array should increase beamformer performance. However, when the number of hydrophones is large, integration times must be long enough to give accurate cross-spectral matrix (CSM) estimates, but short enough so that the dynamic behavior of the noise described by the CSM is captured. The dominant mode rejection (DMR) beamformer calculates adaptive weights based on a reduced rank CSM estimate, where the CSM estimate is formed with a subset of the largest eigenvalues and their eigenvectors. Since the largest eigenvalue/eigenvector pairs are estimated rapidly, the integration time required is reduced. The purpose of this study was to examine the DMR beamformer performance using a bottom-mounted horizontal line array in a shallow-water environment. The data were processed with a fully adaptive beamformer and the DMR beamformer. The DMR beamformer showed better performance than the fully adaptive beamformer when using arrays with larger numbers of hydrophones. Thus, in highly dynamic noise environments, the DMR beamformer may be a more appropriate implementation to use for passive sonar detection systems 相似文献
10.
Acoustic signals received by platform mounted sonar arrays can be spatially processed to enhance the detection of targets in the presence of both ambient and platform generated (self) noise. Ambient noise in the ocean, such as that due to distant shipping or biological choruses, are known to be spatially correlated. The platform generated noise will be of near-field origin and may not be received by all elements in the array. In this paper we investigate the performance of the minimum variance distortionless response (MVDR) beamformer and the recently introduced Fourier integral method (FIM) and compare their performances with the conventional beamformer. Real passive sonar data, obtained from a platform mounted sparse linear array of hydrophones, is used to study the performance of the beamformers in a typical sonar environment. It is shown that in the absence of self noise, when the array is accurately calibrated the MVDR beamformer will perform very well, but when sensor gain or phase errors are present the performance of the MVDR beamformer is degraded. Further, the MVDR beamformer is unable to reject the self noise which is not "seen" by the entire array. FIM however seems to perform well and a modified version of FIM, which we call weighted FIM (WFIM), is shown to perform better and is at worst comparable to a well calibrated MVDR beamformer 相似文献
11.
Active sonar systems have recently been developed using larger arrays and broad-band sources to counter the detrimental effects of reverberation in shallow-water operational areas. Increasing array size and transmit waveform bandwidth improve the signal-to-noise ratio-and-reverberation power ratio (SNR) after matched filtering and beamforming by reducing the size of the range-bearing resolution cell and, thus, decreasing reverberation power levels. This can also have the adverse effect of increasing the tails of the probability density function (pdf) of the reverberation envelope, resulting in an increase in the probability of a false alarm. Using a recently developed model relating the number of scatterers in a resolution cell to a K-distributed reverberation envelope, the effect of increasing bandwidth (i.e., reducing the resolution cell size) on detection performance is examined for additive nonfluctuating and fluctuating target models. The probability of detection for the two target models is seen to be well approximated by that for a shifted gamma variate with matching moments. The approximations are then used to obtain the SNR required to meet a probability of detection and false-alarm performance specification (i.e., the detection threshold). The required SNR is then used to determine that, as long as the target and scatterers are not over-resolved, decreasing the size of the resolution cell always results in an improvement in performance. Thus, the increase in SNR obtained by increasing bandwidth outweighs the accompanying increase in false alarms resulting from heavier reverberation distribution tails for K-distributed reverberation. The amount of improvement is then quantified by the signal excess, which is seen to be as low as one decibel per doubling of bandwidth when the reverberation is severely non-Rayleigh, as opposed to the expected 3-dB gain when the reverberation is Rayleigh distributed. 相似文献
12.
Gorodetskaya E.Yu. Malekhanov A.I. Sazontov A.G. Vdovicheva N.K. 《Oceanic Engineering, IEEE Journal of》1999,24(2):156-171
This paper presents results of combined consideration of sound coherence and array signal processing in long-range deep-water environments. Theoretical evaluation of the acoustic signal mutual coherence function (MCF) of space for a given sound-speed profile and particular scattering mechanism is provided. The predictions of the MCF are employed as input data to investigate the coherence-induced effects on the horizontal and vertical array gains associated with linear and quadratic beamformers with emphasis on the optimal ones. A method of the radiation transport equation is developed to calculate the MCF of the multimode signal under the assumption that internal waves or surface wind waves are the main source of long-range acoustic fluctuations in a deep-water channel. Basic formulations of the array weight vectors and small signal deflection are then exploited to examine optimal linear and quadratic processors in comparison with plane-wave beamformers. For vertical arrays, particular attention is paid also to evaluation of the ambient modal noise factor. The numerical simulations are carried out for range-independent environments from the Northwest Pacific for a sound frequency of 250 Hz and distances up to 1000 km. It was shown distinctly that both signal coherence degradation and modal noise affect large-array gain, and these effects are substantially dependent on the processing technique used. Rough surface sound scattering was determined to cause the most significant effects 相似文献
13.
针对影响拖曳线列阵声纳系统目标检测性能的两种典型近场强干扰源,由宽带近场阵列模型,提出了基于功率谱相关的干扰抵消方法,通过比较基元域频域信号与干扰波束信号功率谱之间的相似关系,找到与每路基元信号相匹配的干扰分量信号,最后通过频域块自适应滤波算法实现每路基元域信号中的干扰抵消。宽带仿真结果与海试表明,这种方法在强干噪比和低信噪比条件下,比最小方差无失真响应和传统基元域干扰抵消方法在阵增益方面提高约10dB。相比传统基元域干扰抵消方法,这种方法能够实现抵消拖船干扰的同时抵消邻近目标强干扰。 相似文献
14.
TenCate J.A. Muir T.G. Caiti A. Kristensen A. Manning J.F. Shooter J.A. Koch R.A. Michelozzi E. 《Oceanic Engineering, IEEE Journal of》1995,20(4):300-310
The problem of locating very low frequency sound sources in shallow water is made difficult by the interaction of propagating acoustic waves with the sea floor. Slow wave speeds and the attendant short wavelengths suggest that low frequency beamforming and source localization with sea floor geophones can be accomplished with relatively small arrays when compared with hydrophone arrays in the water column. To test the feasibility of this approach, experiments were carried out in the shallow water of the Malta Channel of the Straits of Sicily where the Scholte wave speed was some 10 to 20 times slower that the speed of sound in water. A linear array of ten vertically gimballed geophones was deployed and measurements were made on propagating seismic wave fields generated by explosive shots. The resulting directivities, beam patterns, and sidelobe characteristics are in excellent agreement with array theory, which suggests that coherent processing is a viable technique on which to base new applications for seismic arrays on the sea floor. Supporting materials on the geophysics of Scholte waves and calculations of the wave field at the site are presented 相似文献
15.
Spatial processing, including beamforming and diversity combining, is widely used in communications to mitigate intersymbol interference (ISI) and signal fading caused by multipath propagation. Beamforming suppresses ISI (and noise) by eliminating multipath (and noise) arrivals outside the signal beam. Beamforming requires the signals to be highly coherent between the receivers. Diversity combining combats ISI as well as signal fading by taking advantage of the independent information in the signal. Classical (spatial) diversity requires that signals are independently fading, hence are (spatially) uncorrelated with each other. In the real world, the received signals are neither totally coherent nor totally uncorrelated. The available diversity is complex and not well understood. In this paper, we study the spatial processing gain (SPG) as a function of the number of receivers used, receiver separation, and array aperture based on experimental data, using beamforming and multichannel combining algorithms. We find that the output symbol signal-to-noise ratio (SNR) for a multichannel equalizer is predominantly determined by the array aperture divided by the signal coherence length, with a negligible dependence on the number of receivers used. For a given number of receivers, an optimal output symbol SNR (OSNR) is achieved by spacing the receivers equal to or greater than the signal coherence length. We model the SPG in decibels as the sum of the noise suppression gain (NSG, equivalent to signal-to-noise enhancement) and the ISI suppression gain (ISG, equivalent to signal-to-ISI enhancement) both expressed in decibels; the latter exploits the spatial diversity and forms the basis for the diversity gain. Data are interpreted using the modeled result as a guide. We discuss a beam-domain processor for sonar arrays, which yields an improved performance at low-input SNR compared to the element-domain processor because of the SNR enhancement from beamforming many sensors. 相似文献
16.
基于四阶累积量的被动测向声纳高分辨力算法研究 总被引：1，自引：0，他引：1
利用高阶累积量的阵列扩展和抑制高斯噪声特性,提出1种基于四阶累积量的逆波束形成算法,并通过滑动平均进一步改善了算法。仿真结果和实验数据表明:逆波束形成算法较常规波束形成方法在空间方位分辨力和噪声抑制能力上明显提高,可以更有效地应用于被动测向声纳中。 相似文献
17.
Towed array beamforming algorithms require accurate array shape information in order to perform properly. Very often, these algorithms assume the array is linear. Unfortunately, the mechanical forces on the array due to ship motion and sea dynamics can change the shape of the array, which degrades the performance of the beamforming algorithm. A data-driven approach to estimating the relative shape of a nominally linear array is presented. The algorithm is robust in that it optimally combines information contained in a wide band of frequencies and source bearings. At the heart of the algorithm is a maximum-likelihood (ML) estimation scheme. The Cramer-Rao lower bound is derived and compared to the performance of the ML estimator. The utility of the algorithm is verified using both simulated and actual towed array data experiments 相似文献
18.
Neural adaptive beamformers (NABFs) utilize neural paradigms to accomplish desired adaptations that are associated with sensory-field-responsive partitioning and selection processes. Kohonen-type organization and Hopfield-type optimization have been formulated as NABF mechanisms and have been applied to test data. Formulations and results are included. NABFs are also used in conjunction with a learning network for interpretation of weight sets as population codings of direction. An example is included. Desirable qualities of human auditory response are being interpreted in the context of neural adaptive beamforming for the purpose of creating an integrated processing structure that incorporates NABFs, a cochlear model, and an associative memory as part of a total spatiotemporal processing scheme for selective attention 相似文献
19.
The author addresses the spatial coherence of high-frequency acoustic signals that have been forward scattered from the sea surface. The Fresnel-corrected Kirchhoff approximation is applied to derive closed-form expressions for the spatial coherence. These expressions are used to study the influence of geometrical and environmental factors on the coherence. An application of the theory involving the rejection of the surface image of a source by a vertical adaptive line array is presented. The author concludes that the environment has a strong impact on the array processing of surface-scattered fields through its influence on both vertical and horizontal spatial coherence 相似文献
20.
为实现短数据条件下权向量的稳定优化估计,提出1种时空联合估计权向量的MVDR自适应波束形成方法。该方法结合时域解析信号的MVDR自适应波束形成算法中构造时域解析信号的方法和直接数据域算法中空间滑动的方法,以减少一半权向量为代价,实现了在更短的数据长度下稳定优化地估计协方差矩阵和权向量。数值仿真实验和海上实验数据处理结果表明:与常规波束形成和直接数据域相比,该方法具有更好的稳定性和更好的波束性能,即主瓣更窄,旁瓣更低,阵增益更高。 相似文献