共查询到19条相似文献，搜索用时 187 毫秒
1.
2.
3.
海洋平台结构动力响应优化设计与灵敏度分析 总被引：5，自引：1，他引：5
研究了海洋平台结构动力响应优化设计以结构动力响应的灵敏度计算方法。给出了结构稳态频率响应和瞬态时程响应的灵敏度分析算法，并通过数值试验讨论了瞬态响应灵敏度分析算法的精度和差分法中变量摄动量的影响。在JIFEX软件中实现了结构动力响应灵敏度计算，建立海洋平台结构优化模型和求解方法。数值算例表明了本文方法和程序的有效性。 相似文献
4.
5.
海洋平台优化设计的研究进展 总被引：4，自引：0，他引：4
结构优化是结构设计理论的重要发展,随着“十五”渤海大油田勘探开发战略的实施,结构优化技术将在新型抗冰振平台设计中发挥重要作用。从静力优化设计、动力优化设计、基于可靠度优化设计、全寿命优化设计四个方面论述了海洋平台结构优化设计的研究现状,并展望了海洋平台优化设计的研究前景。 相似文献
6.
以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。 相似文献
7.
在海洋水文探测系统中,抛弃式探头是整个探测系统的核心,也是探测工作的执行者。为了得到准确有效的探测数据,就需要对抛弃式探头做进一步的优化设计。采用多学科设计优化方法(multi-disciplinary design optimization,MDO)中的并行子空间优化方法 (concurrent subspace optimization,CSSO)对抛弃式探头进行设计。首先对系统进行分析,得到系统分析的近似模型,其次对并行的子学科进行优化,再次更新系统分析模型,最后验证优化模型的收敛性。结合抛弃式探头的结构,选取了头部进行了优化设计,给出了圆环型、半圆型、圆锥型3种设计方法。利用CAD软件画出三维仿真模型,然后用CFD软件进行流体工作环境仿真,最终确定半圆型头部探头为最优化设计探头。 相似文献
8.
海洋工程船舶管线隔振支座布局直接影响到管线整体的结构性能和经济性。在船舶管线隔振支座布局优化规范设计法的基础上,进一步提出了隔振支座布局几何优化设计模型与方法。该方法假定支座总数目,采用迭代优化算法求解,通过确定各支座的几何位置坐标实现布局优化。该迭代算法依据约束条件的满足情况及变步长的临界间距值来确定支座数量的减少与增加,最终得到较优的支座数目及间距。以应用于某舰艇的二维管道为例,用该方法对其隔振支座布局进行优化设计,并将不同目标函数下的优化结果同规范设计法所得结果进行了对比。比较结果表明,该模型与方法具有较好的可行性与稳定性。 相似文献
9.
10.
SAR影像仿真与水下地形反演的阻尼牛顿—行作用法 总被引：1，自引：0，他引：1
研究了浅海SAR影像仿真与水下地形反演的数值方法。将仿真与反演问题模型处理为相互独立的依赖于时间的非线性偏微分方程动力系统。使反演问题模型仅依赖于SAR影像灰度值，计算可一次性完成，计算过程中无须与正问题进行数据交互，在此基础上，提出了仿真与反演的一种新的一致性优化算法：阻尼牛顿-行作用法．数值实验结果表明，算法对SAR影像仿真问题具有高效、可靠、计算稳定的特征；对水下地形反演问题也有较强的数值稳定性和较高的计算精度。本文3个算例反演出的地形与实际地形之间的相关系数都优于0．72029． 相似文献
11.
SONG Yupu FENG Sheng KANG Haigui
Professor Ph. D. PhD Supervisor State Key Laboratory of Coastal Offshore Engineering Dalian University of Technology 《中国海洋工程》1999,(3)
This paper proposes an optimum design medel for the offshore jacket platform considering multi-design criteria,multi-design constraints and the structure-pile-soil interaction,and gives an optimum designprocedure in which the proposed optimum design model is used together with structural analysis softwareSAP91 and optimum algorithm software OPBI.The Chengbei ~#11 offshore platform,which lies in theShengli oil field,is designed by use of the above optimum design model.The results show that the optimumdesign model is stable,and it depends on neither the optimization algorithm nor initial values of design vari-ables.All values of the objective function converge to the same minimum value,and the speed of conver-gence is high,showing that the proposed optimum design model is reasonable. 相似文献
12.
Optimum Design of Structure Shape for Offshore Jacket Platforms 总被引：1，自引：1，他引：0
FENG Sheng 《中国海洋工程》2000,14(4):435-445
With the introduction of the design variables of nodal coordinates,which reflect the em-bedded depth of the pile and the jacket bed height,a shape optimum design model for offshore jacket plat-forms is established.A sequential two-level optimum algorithm is developed based on the design variablegradation.On the basis of the finite element method,the sensitivity of the objective function and nodal dis-placement is analyzed.As an example,the BZ281 oil storage offshore platform,which lies in the Bohai oilfield,is designed with the shape optimum model.The results are compared with the cross-section optimumdesign.The tendency of design variables and its reasons in the two methods are analyzed.In the shapeoptimum design,the value of objective function is obviously smaller than that of the initial design and thecross-section optimum design.Therefore,the advantage of structure shape optimum design for jacket plat-forms is remarkable. 相似文献
13.
Based on the consideration of operation environment and structural property, an optimnm design model of offshore jacket platform is developed in this paper, namely, the reliability-based full-life cycle optimum design model. In this model, the time-dependent reliability assessment method for structural members is established by combination of the decrease, of sectional size and performance deterioration of material. The initial investment, maintenance cost and failure loss cost are assembled into the model. The total cost of the platform structure system in its full service period is chosen as the objective function, and the initial reliabilities of the layer elements partitioned in advance are taken as the design variables. Different models are obtained, depending on whether the system reliability eonstraint is considered or not. This optimum design model can result in the lowest full-life cost and the optimal initial layer reliability of an offshore jacket platform in the design of marine structures. The feasibility of this model is illustrated with an actual jacket platform in the Liaodong Gulf as an example. 相似文献
14.
15.
浮式海上升压站的动力响应分析是其设计阶段的重要内容,对浮式升压站进行结构优化进而改进其水动力性能意义重大。提出一种基于状态空间模型的浮式海上升压站平台动力响应算法,该方法通过频域拟合的方法计算延迟函数频响函数有理分式的系数,得到延迟函数的极值和留数,进而构建延迟函数的状态空间模型,通过状态空间模型代替Cummins方程中的卷积项,从而计算浮式海上升压站的动力响应。采用日本福岛示范项目的浮式升压站模型对方法进行验证,结果表明计算得到的动力响应与商业软件SESAM计算结果吻合较好,说明方法的有效性。 相似文献
16.
17.
The maximum internal tangential stress is a critical parameter for the design of the PDC （polycrystalline diamond compact） die that has been widely applied to offshore oil drilling. A new simple equation for the calculation of the stress is developed, and verified by the test data from Kingdream Corp. of China, the largest bit Company in China. An opti- mum method for the design of the PDC die is presented and demonstrated in detail, and software for the design and FEM analysis of the die is developed on the basis of the method. This software has been used in oil industry in recent years. 相似文献
18.
Zhang Lianying Hu Yunchang Li Xiangjing Doctor Lecturer Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin Professor Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin Master Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin 《中国海洋工程》1998,(1)
In this paper,the problem of reliability-based optimal design of simple offshore platform isstudied,and a nonlinear fatigue damage model based on damage mechanics and genetic algorithms areused in the fatigue reliability optimum design of the structure under stochastic wave load.The fatigue dam-age model and the yield failure reliability analyzing model are used in the paper.The reliability of the mod-els and the effectiveness of genetic algorithm are shown by the results of optimum design. 相似文献