共查询到20条相似文献，搜索用时 109 毫秒
1.
According to the earlier international studies on the coupled ice-ocean model and the hydrology, meteorology, and ice features in the Bohai Sea, a coupled ice-ocean model is developed based on the National Marine Environment Forecast Center‘ s (NMEFC) numerical forecasting ice model of the Bohai Sea and the Princeton ocean model (POM). In the coupled model, the transfer of momentum and heat between ocean and ice is two-way, and the change of ice thickness and concentration depends on heat budget not only at the surface and bottom of ice, but also at the surface of open water between ices. The dynamic and thermodynamic coupling process is expatiated emphatically. Some thermodynamic parameters are discussed as well. 相似文献
2.
A class of E1 Niйo atmospheric physics oscillation model is considered. The E1 Niйo atmospheric physics oscillation is an abnormal phenomenon involved in the tropical Pacific ocean-atmosphere interactions. The conceptual oscillator model should consider the variations of both the eastern and western Pacific anomaly patterns. An E1 Niйo atmospheric physics model is proposed using a method for the variational iteration theory. Using the variational iteration method, the approximate expansions of the solution of corresponding problem are constructed. That is, firstly, introducing a set of functional and accounting their variationals, the Lagrange multiplicators are counted, and then the variational iteration is defined, finally, the approximate solution is obtained. From approximate expansions of the solution, the zonal sea surface temperature anomaly in the equatorial eastern Pacific and the thermocline depth anomaly of the sea-air oscillation for E1 Niйo atmospheric physics model can be analyzed. E1 Niйo is a very complicated natural phenomenon. Hence basic models need to be reduced for the sea-air oscillator and are solved. The variational iteration is a simple and valid approximate method. 相似文献
3.
A series of hydraulic model tests with horizontal movable seabed under regular wave actions have been carried out to investigate the dynamic interactions between water waves and seabed soil. Seabed dynamic stresses from experiments are, tound to differ from theoretical resuhs. The response of p0 in permeable seabed has a small decay and phase shift to the nonlinear wave actions, and the dynamic stresses, σs/p0, σh/p0 and u/p0, contain different phase shift characteristics. Such phenomena will strongly affect the dynamic stress path in seabed. If the phase shifts of σs. and σh are neglected, the stress path will become a straight line; otherwise, it will become an elliptical curve. In phase shift cases, the long axis of the p - q diagram will be shortened when the depth increases, and the short axis will become longer when the phase shift increases. For the p＇ - q＇ diagram, the larger the phase lag of u, the longer the short axis. Relative results offer useful information for the analysis of seabed stability. 相似文献
4.
A new three-dimensional numerical model is derived through a wave average on the primitive N-S equations, in which both the＂Coriolis-Stokes forcing＂ and the＂Stokes-Vortex force＂ are considered. Three ideal experiments are run using the new model applied to the Princeton ocean model （POM）. Numerical results show that surface waves play an important role on the mixing of the upper ocean. The mixed layer is enhanced when wave effect is considered in conjunction with small Langmuir numbers. Both surface wave breaking and Stokes production can strengthen the turbulent mixing near the surface. However, the influence of wave breaking is limited to a thin layer, but Stokes drift can affect the whole mixed layer. Furthermore, the vertical mixing coefficients clearly rise in the mixed layer, and the upper ocean mixed layer is deepened especially in the Antarctic Circumpolar Current when the model is applied to global simulations. It indicates that the surface gravity waves are indispensable in enhancing the mixing in the upper ocean, and should be accounted for in ocean general circulation models. 相似文献
5.
A fully nonlinear numerical model based on a time-domain higher-order boundary element method (HOBEM) is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here. 相似文献
6.
A novel theoretical approach is applied to predict the propagation and transformation of transient nonlinear waves on a current. The problem was solved by applying an eigenfunction expansion method and the derived semi-analytical solution was employed to study the transformation of wave profile and the evolution of wave spectrum arising from the nonlinear interactions of wave components in a wave train which may lead to the formation of very large waves. The results show that the propagation of wave trains is significantly affected by a current. A relatively small current may substantially affect wave train components and the wave train shape. This is observed for both opposing and following current. The results demonstrate that the application of the nonlinear model has a substantial effect on the shape of a wave spectrum. A train of originally linear and very narrow-banded waves changes its one-peak spectrum to a multi-peak one in a fairly short distance from an initial position. The discrepancies between the wave trains predicted by applying the linear and nonlinear models increase with the increasing wavelength and become significant in shallow water even for waves with low steepness. Laboratory experiments were conducted in a wave flume to verify theoretical results. The free-surface elevations recorded by a system of wave gauges are compared with the results provided by the nonlinear model. Additional verification was achieved by applying a Fourier analysis and comparing wave amplitude spectra obtained from theoretical results with experimental data. A reasonable agreement between theoretical results and experimental data is observed for both amplitudes and phases. The model predicts fairly well multi-peak spectra, including wave spectra with significant nonlinear wave components. 相似文献
7.
Microwave remote sensing is one of the most useful methods for observing the ocean parameters. The Doppler frequency or interferometric phase of the radar echoes can be used for an ocean surface current speed retrieval,which is widely used in spaceborne and airborne radars. While the effect of the ocean currents and waves is interactional. It is impossible to retrieve the ocean surface current speed from Doppler frequency shift directly. In order to study the relationship between the ocean surface current speed and the Doppler frequency shift, a numerical ocean surface Doppler spectrum model is established and validated with a reference. The input parameters of ocean Doppler spectrum include an ocean wave elevation model, a directional distribution function, and wind speed and direction. The suitable ocean wave elevation spectrum and the directional distribution function are selected by comparing the ocean Doppler spectrum in C band with an empirical geophysical model function(CDOP). What is more, the error sensitivities of ocean surface current speed to the wind speed and direction are analyzed. All these simulations are in Ku band. The simulation results show that the ocean surface current speed error is sensitive to the wind speed and direction errors. With VV polarization, the ocean surface current speed error is about 0.15 m/s when the wind speed error is 2 m/s, and the ocean surface current speed error is smaller than 0.3 m/s when the wind direction error is within 20° in the cross wind direction. 相似文献
8.
Combining a linear regression and a temperature budget formula, a multivariate regression model is proposed to parameterize and estimate sea surface temperature(SST) cooling induced by tropical cyclones(TCs). Three major dynamic and thermodynamic processes governing the TC-induced SST cooling(SSTC), vertical mixing, upwelling and heat flux, are parameterized empirically using a combination of multiple atmospheric and oceanic variables:sea surface height(SSH), wind speed, wind curl, TC translation speed and surface net heat flux. The regression model fits reasonably well with 10-year statistical observations/reanalysis data obtained from 100 selected TCs in the northwestern Pacific during 2001–2010, with an averaged fitting error of 0.07 and a mean absolute error of 0.72°C between diagnostic and observed SST cooling. The results reveal that the vertical mixing is overall the pre dominant process producing ocean SST cooling, accounting for 55% of the total cooling. The upwelling accounts for 18% of the total cooling and its maximum occurs near the TC center, associated with TC-induced Ekman pumping. The surface heat flux accounts for 26% of the total cooling, and its contribution increases towards the tropics and the continental shelf. The ocean thermal structures, represented by the SSH in the regression model,plays an important role in modulating the SST cooling pattern. The concept of the regression model can be applicable in TC weather prediction models to improve SST parameterization schemes. 相似文献
9.
Projections of ocean climate for northwestern Pacific Ocean 总被引：1，自引：1，他引：0
The long-term adjustment processes of atmosphere and ocean in response to gradually increased atmospheric CO2 concentration have been analyzed in 70 and 140a integrations with NCAR fully-coupled climate system model (CSM). In these experiments the CO2 concentration has been increased to double and quadruples the initial concentration, respectively. After 70a, at the time of CO2 doubling, the model predicts surface air temperature rises by 1.2 and 1.5K for the globe and the northwestern Pacific Ocean, respectively. The behavior of the quadrupling run is similar: each global and regional mean surface air temperatures increase by 2.8 and 3.0K at the time of CO2 quadrupling. From the experiments, surface air temperature changes in the northwestern Pacific Ocean will be more distinctive compared with the global average, mainly due to exceptionally large warming and sea level change near the entrance of the Kuroshio extension. 相似文献
10.
A New Maximum Entropy Probability Function for the Surface Elevation of Nonlinear Sea Waves 总被引：9，自引：3，他引：9
Based on the maximum entropy principle a new probability density function （PDF） f（x） for the surface elevation of nonlinear sea waves, X, is derived through performing a coordinate transform of X and solving a variation problem subject to three constraint conditions of f（ x ）. Compared with the maximum entropy PDFs presented previously, the new PDF has the following merits： （1） it has four parameters to be determined and hence can give more refined fit to observed data and has wider suitability for nonlinear waves in different conditions; （2） these parameters are expressed in terms of distribution moments of X in a relatively simple form and hence are easy to be determined from observed data; （3） the PDF is free of the restriction of weak nonlinearity and possible to be used for sea waves in complicated conditions, such as those in shallow waters with complicated topography; and （4） the PDF is simple in form and hence convenient for theoretical and practical uses. l.aboratory wind-wave experiments have been conducted to test the competence of the new PDF for the surface elevation of nonlinear waves. The experimental results manifest that the new PDF gives somewhat better fit to the laboratory wind-wave data than the well-known Gram-Charlier PDF and beta PDF. 相似文献
11.
Wave-tide-surge coupled simulation for typhoon Maemi 总被引：1，自引：0，他引：1
The main task of this study focuses on studying the effect of wave-current interaction on currents, storm surge and wind wave as well as effects of current induced wave refraction and current on waves by using numerical models which consider the bottom boundary layer and sea surface roughness parameter for shallow and smooth bed area around Korean Peninsula. The coupled system (unstructured-mesh SWAN wave and ADCIRC) run on the same unstructured mesh. This identical and homogeneous mesh allows the physics of wave-circulation interactions to be correctly resolved in both models. The unstructured mesh can be applied to a large domain allowing all energy from deep to shallow waters to be seamlessly followed. There is no nesting or overlapping of structured wave meshes, and no interpolation is required. In response to typhoon Maemi (2003), all model components were validated independently, and shown to provide a faithful representation of the system’s response to this storm. The waves and storm surge were allowed to develop on the continental shelf and interact with the complex nearshore environment. The resulting modeling system can be used extensively for prediction of the typhoon surge. The result show that it is important to incorporate the wave-current interaction effect into coastal area in the wave-tide-surge coupled model. At the same time, it should consider effects of depth-induced wave breaking, wind field, currents and sea surface elevation in prediction of waves. Specially, we found that: (1) wave radiation stress enhanced the current and surge elevation otherwise wave enhanced nonlinear bottom boundary layer decreased that, (2) wind wave was significantly controlled by sea surface roughness thus we cautiously took the experimental expression. The resulting modeling system can be used for hindcasting (prediction) the wave-tide-surge coupled environments at complex coastline, shallow water and fine sediment area like areas around Korean Peninsula. 相似文献
12.
A hindcast simulation of 75 typhoons and winter monsoons which affected the coastal areas of Korean Peninsula is performed by use of a third generation ocean wave prediction model, WAM-cycle 4 model, loosely coupled with a com-bined tide and surge model. Typhoon wind fields are derived from the planetary marine boundary layer model for effective neutral winds embedding the vortical storm wind from the parameterized Rankin vortex type model in the limited areas of the overall modeled region. The hindcasted results illustrate that significant wave heights (SWH) considering the wave-tide-surge coupled process are significantly different from the results via the decoupled case especially in the region of the estuaries of the Changjiang Estuary, The Hangzhou Bay, and the southwestern tip of Korean Peninsula. This extensive model simulation is the first attempt to investigate the strong wave-tide-surge interaction for the shallow depth area along the coasts of the Yellow Sea and the East China Sea Continental 相似文献
13.
Down-scaled regional ocean modeling system (ROMS) for high-resolution coastal hydrodynamics in Korea 总被引：1，自引：0，他引：1
A down-scaled operational oceanographic system is developed for the coastal waters of Korea using a regional ocean modeling system(ROMS).The operational oceanographic modeling system consists of atmospheric and hydrodynamic models.The hydrodynamic model,ROMS,is coupled with wave,sediment transport,and water quality modules.The system forecasts the predicted results twice a day on a 72 h basis,including sea surface elevation,currents,temperature,salinity,storm surge height,and wave information for the coastal waters of Korea.The predicted results are exported to the web-GIS-based coastal information system for real-time dissemination to the public and validation with real-time monitoring data using visualization technologies.The ROMS is two-way coupled with a simulating waves nearshore model,SWAN,for the hydrodynamics and waves,nested with the meteorological model,WRF,for the atmospheric surface forcing,and externally nested with the eutrophication model,CE-QUAL-ICM,for the water quality.The operational model,ROMS,was calibrated with the tidal surface observed with a tide-gage and verified with current data observed by bottom-mounted ADCP or AWAC near the coastal waters of Korea.To validate the predicted results,we used real-time monitoring data derived from remote buoy system,HF-radar,and geostationary ocean color imager(GOCI).This down-scaled operational coastal forecasting system will be used as a part of the Korea operational oceanographic system(KOOS) with other operational oceanographic systems. 相似文献
14.
山东半岛北部海洋动力环境的高频地波雷达观测 总被引：1，自引：0，他引：1
利用两台高频地波雷达(ground wave radar,WERA)站对山东半岛北部雷达覆盖海区的浪、流场进行了观测,并且利用海洋-大气-波浪耦合沉积输运模型(coupled-ocean-atmosphere-wave-sediment transport modeling system,COAWST)对该区域的一个强风暴过程进行了数值模拟,对雷达观测数据、现场声学多普勒流速剖面仪(acoustic Doppler current profilers,ADCP)调查数据和数值模拟结果进行比对分析发现,模型模拟的水位变化与ADCP测量结果一致,WERA所观测到的有效波高和ADCP结果比较吻合,模型模拟的ADCP站位的流速相位、大小与雷达观测结果比较接近,与ADCP的结果有一定偏差。雷达观测的海区流场结果与模型反映趋势基本一致,但是在近岸方向上变化较大,其原因可能与ADCP的投放位置、模型的分辨率设置等因素有关。高频地波雷达系统是海岸带动力环境观测的一个有效工具,在实际应用中有着广泛的前景。 相似文献
15.
A coupled wave–tide–surge model has been established in this study in order to investigate the effect of tides, storm surges, and wind waves interactions during a winter monsoon on November 1983 in the Yellow Sea. The coupled model is based on the synchronous dynamic coupling of a third-generation wave model, WAM-Cycle 4, and the two-dimensional tide–surge model. The surface stress generated by interactions between wind and waves is calculated using the WAM-Cycle 4 directly based on an analytical approximation of the results obtained from the quasi-linear theory of wave generation. The changes of bottom friction factor generated by waves and current interactions are calculated by using simplified bottom boundary layer model. The model simulations showed that bottom velocity and effective bottom drag coefficient induced by combination of wave and current were increased in shallow waters of up to 50 m in the Yellow Sea during the wintertime strong storm conditions. 相似文献
16.
A procedure to correlate extreme wave heights and extreme water levels in coastal waters using numerical models together with joint probability analysis has been proposed. A third-generation wave model for wave simulation and a three-dimensional flow model for water level simulation are coupled through the surface atmospheric boundary layer. The model has been calibrated and validated against wind, wave and water level data collected in the coastal waters of Hong Kong. The annual maximum wave height and the concomitant water level have been obtained by simulating the annual extreme typhoon event for 50 consecutive years. The results from bivariate extreme value analysis of the simulated data show that the commonly used empirical method may lead to underestimation of the design water level. 相似文献
17.
山东半岛一次强冷流降雪过程的中尺度特征分析 总被引：15，自引：2，他引：15
利用高空和地面的常规观测和天气加密观测资料,以及MM5V3.6中尺度数值模式系统的模拟结果,对2003年1月3~5日山东半岛北部地区发生的暴雪过程进行了中尺度特征研究。实况资料表明:在高空有利的大尺度环流形势控制下,不断入侵的冷空气作用下,受渤海暖海面的热力作用和山东半岛地形作用,产生了中尺度的海岸锋。在强冷平流、海岸锋锋生及半岛地形的摩擦抬升共同作用下,产生了这次强冷流降雪。海岸锋环流形成的对流云能引起降水量的局部增强。数值模拟结果表明:海岸锋生过程及其产生的沿岸辐合带是形成山东半岛冷流暴雪的主要原因,同时海岸锋同低层大气重力波耦合形成了海岸锋陷波。本文给出了山东半岛北岸海岸锋的概念模型。 相似文献
18.
《Ocean Modelling》2008,20(3):252-269
The effects of wave–current interactions on the storm surge and inundation induced by Hurricane Hugo in and around the Charleston Harbor and its adjacent coastal regions are examined by using a three-dimensional (3-D) wave–current coupled modeling system. The 3-D storm surge and inundation modeling component of the coupled system is based on the Princeton ocean model (POM), whereas the wave modeling component is based on the third-generation wave model, simulating waves nearshore (SWAN). The results indicate that the effects of wave-induced surface, bottom, and radiation stresses can separately or in combination produce significant changes in storm surge and inundation. The effects of waves vary spatially. In some areas, the contribution of waves to peak storm surge during Hurricane Hugo reached as high as 0.76 m which led to substantial changes in the inundation and drying areas simulated by the storm surge model. 相似文献
19.
K. F. Cheung A. C. Phadke Y. Wei R. Rojas Y. J. -M. Douyere C. D. Martino S. H. Houston P. L. -F. Liu P. J. Lynett N. Dodd S. Liao E. Nakazaki 《Ocean Engineering》2003,30(11):1353-1386
This paper describes a model package that simulates coastal flooding resulting from storm surge and waves generated by tropical cyclones. The package consists of four component models implemented at three levels of nested geographic regions, namely, ocean, coastal, and nearshore. The operation is automated through a preprocessor that prepares the computational grids and input atmospheric conditions and manages the data transfer between components. The third generation spectral wave model WAM and a nonlinear long-wave model calculate respectively the wave conditions and storm surge over the ocean region. The simulation results define the water levels and boundary conditions for the model SWAN to transform the storm waves in coastal regions. The storm surge and local tides define the water level in each nearshore region, where a Boussinesq model uses the wave spectra output from SWAN to simulate the surf-zone processes and runup along the coastline. The package is applied to hindcast the coastal flooding caused by Hurricanes Iwa and Iniki, which hit the Hawaiian Island of Kauai in 1982 and 1992, respectively. The model results indicate good agreement with the storm-water levels and overwash debris lines recorded during and after the events, demonstrating the capability of the model package as a forecast tool for emergency management. 相似文献
20.
A coupled wave–tide–surge model has been developed in this study in order to investigate the effect of the interactions among tides, storm surges, and wind waves. The coupled model is based on the synchronous dynamic coupling of a third-generation wave model, WAM cycle 4, and the two-dimensional tide–surge model. The surface stress, which is generated by interactions between wind and wave, is calculated by using the WAM model directly based on an analytical approximation of the results using the quasi-linear theory of wave generation. The changes in bottom friction are created by the interactions between waves and currents and calculated by using simplified bottom boundary layer model. In consequence, the combined wave–current-induced bottom velocity and effective bottom drag coefficient were increased in the shallow waters during the strong storm conditions. 相似文献