首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Transition zones (or ‘ecotones’) are ecologically important spatial elements of subtidal landscapes that represent a mixture of different habitat elements. We provide a method for identifying such areas in broad-scale surveys of the seafloor using the acoustic discrimination system QTC VIEW. QTC VIEW is an acoustic processing system that assigns sonar ping stacks to clusters of like points, to identify different habitats on the seafloor. Paired QTC VIEW transects (20 m spacing) were run at intervals of 200 m, at two separate sampling locations, to assess the consistency of clustering of individual ping stacks into acoustic classes. Very consistent spatial patterns of class change were found between transect pairs, suggesting high stability in the classification process. QTC VIEW assigns confidence values to each individual record; running averages calculated using a moving window along transects showed drops in confidence values associated with areas of transition in habitat class assignment, but this was not always consistent. The Berger–Parker index, a class dominance statistic, provided a more consistent transition indicator. Class transition ranged from abrupt to gradual, along with areas where a mixture of acoustic classes occurred. However, acoustically detected transition zones did not consistently respond to visual observations of the sea floor.  相似文献   

2.
The Bering Sea shelf and Chukchi Sea shelf are believed to hold enormous oil and gas reserves which have attracted a lot of geophysical surveys. For the interpretation of acoustic geophysical survey results, sediment sound velocity is one of the main parameters. On seven sediment cores collected from the Bering Sea and Chukchi Sea during the 5th Chinese National Arctic Research Expedition, sound velocity measurements were made at 35, 50, 100, 135, 150, 174, 200, and 250 k Hz using eight separate pairs of ultrasonic transducers. The measured sound velocities range from 1 425.1 m/s to 1 606.4 m/s and are dispersive with the degrees of dispersion from 2.2% to 4.0% over a frequency range of 35–250 k Hz. After the sound velocity measurements, the measurements of selected geotechnical properties and the Scanning Electron Microscopic observation of microstructure were also made on the sediment cores. The results show that the seafloor sediments are composed of silty sand, sandy silt, coarse silt, clayey silt, sand-silt-clay and silty clay. Aggregate and diatom debris is found in the seafloor sediments. Through comparative analysis of microphotographs and geotechnical properties, it is assumed that the large pore spaces between aggregates and the intraparticulate porosity of diatom debris increase the porosity of the seafloor sediments, and affect other geotechnical properties. The correlation analysis of sound velocity and geotechnical properties shows that the correlation of sound velocity with porosity and wet bulk density is extreme significant, while the correlation of sound velocity with clay content, mean grain size and organic content is not significant. The regression equations between porosity, wet bulk density and sound velocity based on best-fit polynomial are given.  相似文献   

3.
Selection of a set of dominant echo features to classify seafloor sediments using a multilayer perceptron neural network is investigated at two acoustic frequencies (33 and 210 kHz). Several sets of inputs with different combinations of two, three, four, five, and six echo features are exploited with three-layer neural networks. The performances of the networks are analyzed to assess the most discriminating set of echo features for classification of seafloor sediments. The results of the overall average performances reveal that backscatter strength and time spread are the two most important echo features at 33 kHz, whereas backscatter strength has higher discriminating characteristics at 210 kHz for seafloor sediment classification. In addition, a set of four echo features consisting of backscatter strength, time-spread, statistical skewness, and Hausdroff dimension gives the highest success at both the acoustic frequencies.  相似文献   

4.
The single-beam acoustic ground discrimination system QTC View, Series V, was used in the Bay of Cadiz, Southwest Spain, for the identification and mapping of the bottom acoustic diversity. The acoustic data were obtained through two successive surveys, each conducted with one of the following echo sounder frequencies: 50 kHz and 200 kHz. The performance of each survey frequency for the identification of the sedimentary gradients was analyzed. The surveys were conducted during high tide given that the majority of the surveyed area is shallower than 5 m, although depth may occasionally reach 20 m in specific areas located in a navigation channel. The acoustic data obtained at the two different frequencies were, individually, submitted to manual clustering and a final solution consisting of three acoustic classes was reached for both datasets. However, only the geographical distribution of the acoustic classes obtained with 50 kHz echo sounder frequency was coincident with the spatial distribution of the superficial sediment groups (silty medium sand, very silty fine sand and mud), identified through multivariate analysis of the grain-size data of ground-truth sediment samples. The results obtained with the 200 kHz echo sounder frequency did not match the sedimentary gradients obtained for the area surveyed, not even the separation of muddy and sandy areas.  相似文献   

5.
Marine seep hunting surveys are a current focus of hydrocarbon exploration surveys due to recent advances in offshore geophysical surveying, geochemical sampling, and analytical technologies. Hydrocarbon seeps are ephemeral, small, discrete, and therefore difficult to sample on the deep seafloor. Multibeam echosounders are an efficient seafloor exploration tool to remotely locate and map seep features. Geophysical signatures from hydrocarbon seeps are acoustically-evident in bathymetric, seafloor backscatter, midwater backscatter datasets. Interpretation of these signatures in backscatter datasets is a fundamental component of commercial seep hunting campaigns. Degradation of backscatter datasets resulting from environmental, geometric, and system noise can interfere with the detection and delineation of seeps. We present a relative backscatter intensity normalization method and an oversampling acquisition technique that can improve the geological resolvability of hydrocarbon seeps. We use Green Canyon (GC) Block 600 in the Northern Gulf of Mexico as a seep calibration site for a Kongsberg EM302 30 kHz MBES prior to the start of the Gigante seep hunting program to analyze these techniques. At GC600, we evaluate the results of a backscatter intensity normalization, assess the effectiveness of 2X seafloor coverage in resolving seep-related features in backscatter data, and determine the off-nadir detection limits of bubble plumes using the EM302. Incorporating these techniques into seep hunting surveys can improve the detectability and sampling of seafloor seeps.  相似文献   

6.
This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r2?>?0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings.  相似文献   

7.
Surface properties of the seabed in a 180 km2 area of coastal waters (14–57 m depth) off northeast Scotland were mapped by hydro-acoustic discrimination using single and multi-beam echosounders linked to signal processing systems (RoxAnn for the single beam, and Questor Tangent Corporation (QTC) Multiview for the multibeam). Subsequently, two ground truthing surveys were carried out, using grab and TV sampling. The RoxAnn and QTC-Multiview outputs showed strong similarity in their classifications of seabed types. Classifications generated by QTC-Multiview were used to supervise those based on seabed roughness and hardness indices produced by the RoxAnn system and thereby develop a ‘blended’ map based on both systems. The resulting hydro-acoustic classes agreed well with a cluster analysis of data on sediment grain sizes from the grab sampling, and indicated that the area could be described by distinct regions of surface texture and surficial sediments ranging from muddy sand to boulders and rock.  相似文献   

8.
A series of multibeam sonar surveys were conducted from 2009 to 2013 around Admiralty Bay, Shetland Islands, Antarctica. These surveys provided a detailed bathymetric model that helped understand and characterize the bottom geology of this remote area. Unfortunately, the acoustic backscatter records registered during these bathymetric surveys were heavily contaminated with noise and motion artifacts. These artifacts persisted in the backscatter records despite the fact that the proper acquisition geometry and the necessary offsets and delays were applied during the survey and in post-processing. These noisy backscatter records were very difficult to interpret and to correlate with gravity-core samples acquired in the same area. In order to address this issue, a directional notch-filter was applied to the backscatter waterfall in the along-track direction. The proposed filter provided better estimates for the backscatter strength of each sample by considerably reducing residual motion artifacts. The restoration of individual samples was possible since the waterfall frame of reference preserves the acquisition geometry. Then, a remote seafloor characterization procedure based on an acoustic model inversion was applied to the restored backscatter samples, generating remote estimates of acoustic impedance. These remote estimates were compared to Multi Sensor Core Logger measurements of acoustic impedance obtained from gravity core samples. The remote estimates and the Core Logger measurements of acoustic impedance were comparable when the shallow seafloor was homogeneous. The proposed waterfall notch-filtering approach can be applied to any sonar record, provided that we know the system ping-rate and sampling frequency.  相似文献   

9.
While the average seafloor backscatter strength within a narrow range of grazing angles can be used as a first-order classification tool, this technique often fails to distinguish seafloors of known differing geological character. In order to resolve such ambiguities, it is necessary to examine the variation in backscatter strength as a function of grazing angle. For this purpose, a series of multiply overlapping GLORIA sidescan sonar images (6.5 kHz) have been obtained in water depths ranging from 1000 to 2500 m. To constrain the placement of acoustic backscatter measurements and to measure the true impinging angle of the incident wave, the corresponding seafloor was simultaneously surveyed using the Seabeam multibeam system. As a result of the multiple overlap, the angular response of seafloor backscatter strength may be derived for regions much smaller than the swath width. By using the derived angular response of seafloor backscatter strength in regions for which sediment samples exist, an empirical seafloor classification scheme is proposed based on the shape, variance, and magnitude of the angular response. Because of the observed variability in the shape of the angular response with differing seafloor types, routine normalization of single-pass swath data to an equivalent single grazing angle image cannot be achieved. As a result, for the case of single-pass surveys, confident seafloor classification may only be possible for regions approaching the scale of the swath width  相似文献   

10.
Multidisciplinary surveys were conducted to investigate gas seepage and gas hydrate accumulation on the northeastern Sakhalin continental slope (NESS), Sea of Okhotsk, during joint Korean–Russian–Japanese expeditions conducted from 2003 to 2007 (CHAOS and SSGH projects). One hundred sixty-one gas seeps were detected in a 2000 km2 area of the NESS (between 53°45′N and 54°45′N). Active gas seeps in a gas hydrate province on the NESS were evident from features in the water column, on the seafloor, and in the subsurface: well-defined hydroacoustic anomalies (gas flares), side-scan sonar structures with high backscatter intensity (seepage structures), bathymetric structures (pockmarks and mounds), gas- and gas-hydrate-related seismic features (bottom-simulating reflectors, gas chimneys, high-amplitude reflectors, and acoustic blanking), high methane concentrations in seawater, and gas hydrates in sediment near the seafloor. These expressions were generally spatially related; a gas flare would be associated with a seepage structure (mound), below which a gas chimney was present. The spatial distribution of gas seeps on the NESS is controlled by four types of geological structures: faults, the shelf break, seafloor canyons, and submarine slides. Gas chimneys that produced enhanced reflection on high-resolution seismic profiles are interpreted as active pathways for upward gas migration to the seafloor. The chimneys and gas flares are good indicators of active seepage.  相似文献   

11.
Two highly active mud volcanoes located in 990–1,265 m water depths were mapped on the northern Egyptian continental slope during the BIONIL expedition of R/V Meteor in October 2006. High-resolution swath bathymetry and backscatter imagery were acquired with an autonomous underwater vehicle (AUV)-mounted multibeam echosounder, operating at a frequency of 200 kHz. Data allowed for the construction of ~1 m pixel bathymetry and backscatter maps. The newly produced maps provide details of the seabed morphology and texture, and insights into the formation of the two mud volcanoes. They also contain key indicators on the distribution of seepage and its tectonic control. The acquisition of high-resolution seafloor bathymetry and acoustic imagery maps with an AUV-mounted multibeam echosounder fills the gap in spatial scale between conventional multibeam data collected from a surface vessel and in situ video observations made from a manned submersible or a remotely operating vehicle.  相似文献   

12.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

13.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

14.
The relationship between acoustic backscatter, sediment characteristics and benthic habitat is examined using high-resolution sidescan sonar data collected at the Loch Linnhe artificial reef site on the west coast of Scotland. The site is typical for the continental shelf of NW Europe, with a mix of seabed environments from muddy to coarse, stony substrata on a 10–100 m length scale. A sidescan sonar mosaic was produced and classified according to derived backscatter parameters (mean, median and standard deviation of the backscatter values) using an unsupervised classification procedure. The accuracy of the final classified map was assessed by comparison with a ground-truthing survey in which the biological habitat was derived from underwater video footage. The sidescan correctly predicted seabed surface characteristics of observed biological habitat with 78% accuracy. A second, and more challenging test of the acoustic data to correctly predict biological habitat was made by comparing it with data from 21 grab sampling stations. These stations were divided into three groups using multivariate statistical techniques based on their backscatter properties. Benthic assemblage structure was found to be significantly distinct between the high and low, and the medium and low backscatter stations. There was a low to moderate but significant correlation between the multivariate patterns of acoustic backscatter, benthic assemblage structure, and particle size distribution. The work shows that even in areas with subtle and gradational changes in substratum, the sidescan was able to predict biological community with an acceptable accuracy.  相似文献   

15.
An acoustic ground discrimination system (QTC VIEW, Series IV) was used to identify and map the bottom acoustic diversity in the bar channel of Ria de Aveiro, Western Portugal. The majority of the survey area presented shallow depth for this type of equipment, ranging mainly from 5 to 15 m. Depth occasionally reached 25 m in specific areas located across the entrance channel, dug by the strong tidal currents, reaching 3 m/s. The acoustic data were submitted to manual and auto-cluster and the results obtained from both procedures were coherent. Using aids to the acoustic classification and ground-truth sediment data, a final solution consisting of four acoustic classes was reached. Their geographical distribution was coincident with the spatial distribution of the major bottom types and sediment groups (hard bottom, coarse sand, medium sand and fine sand), identified through multivariate analysis of the grain-size data, and reflected the complex hydrodynamics of the entrance channel. The acoustic pattern was coincident at the intersections of the acoustic survey lines, assuring the repeatability of the acoustic procedure. Overall, the acoustic approach showed consistent results for the assessment and mapping of the benthic habitats in this shallow-water coastal area, providing a very valuable tool in an area where conventional sediment sampling is less favourable, namely due to strong tidal currents and frequent ship traffic, such as the entrance channel of Ria de Aveiro and the near-shore adjacent shelf.  相似文献   

16.
In-situ geotechnical measurements of surface sediments were carried out along large subaqueous dunes in the Knudedyb tidal inlet channel in the Danish Wadden Sea using a small free-falling penetrometer. Vertical profiles showed a typical stratification pattern with a resolution of ∼1 cm depicting a thin surface layer of low sediment strength and a stiffer substratum below (quasi-static bearing capacity equivalent: 1–3 kPa in the top layer, 20–140 kPa in the underlying sediment; thickness of the top layer ca. 5–8 cm). Observed variations in the thickness and strength of the surface layer during a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter intensity). The results revealed an ebb dominance in sediment remobilization, and a general accretion of the bed towards low water. A loose top layer occurred throughout the tidal cycle, likely influenced by bedload transport and small events of suspended sediment resettlement (thickness: 6 ± 2 cm). Furthermore, this layer showed a significant increase in thickness (e.g. from 8 cm to 16 cm) related to periods of overall deposition. These findings imply that dynamic penetrometers can conveniently serve to (1) quantify potentially mobile sediments by determining the thickness of a loose sediment surface layer, (2) unravel sediment strength development in potentially mobile sediments and (3) identify sediment accumulation. Such data are an important complement and add a new geotechnical perspective during investigations of sediment remobilization processes in highly dynamic coastal environments.  相似文献   

17.
A high level of confidence in resource data is a key prerequisite for conducting a reliable economic feasibility study in deep water seafloor mining. However, the acquisition of accurate resource data is difficult when employing traditional point-sampling methods to assess the resource potential of polymetallic nodules, given the vast size of the survey area and high spatial variability in nodule distribution. In this study, we analyzed high-resolution acoustic backscatter intensity images to estimate nodule abundance and increase confidence levels in nodule abundance data. We operated a 120 kHz deep-towed sidescan sonar (DSL-120) system (1×1 m resolution) across a 75 km2 representative area in the Korean Exploration Area for polymetallic nodules in the Northeastern Equatorial Pacific. A deep-towed camera system was also run along two tracks in the same area to estimate the abundance of polymetallic nodules on the seafloor. Backscatter data were classified into four facies based on intensity. The facies with the weakest and strongest backscatter intensities occurred in areas of high slope gradient and basement outcrops, respectively. The backscatter intensities of the two other facies correlated well with the nodule abundances estimated from still-camera images. A linear fit between backscatter intensity and mean nodule abundance for 10 zones in the study area yielded an excellent correlation (r2 = 0.97). This allowed us to compile a map of polymetallic nodule abundance that shows greater resolution than a map derived from the extrapolation of point-sampling data. Our preliminary analyses indicate that it is possible to greatly increase the confidence level of nodule resource data if the relationship between backscatter intensity and nodule abundance is reliably established. This approach has another key advantage over point sampling and image analyses in that detailed maps of mining obstacles along the seafloor are produced when acquiring data on the abundance of polymetallic nodules. The key limitation of this work is a poor correlation between nodule coverage, as observed from photographs, and nodule abundance. Significant additional ground truth sampling using well located box cores should be completed to determine whether or not there is a real correlation between the backscatter and abundance.  相似文献   

18.
An overview of SAX99: acoustic measurements   总被引：5，自引：0，他引：5  
A high-frequency acoustic experiment was performed at a site 2 km from shore on the Florida Panhandle near Fort Walton Beach in water of 18-19 m depth. The goal of the experiment was, for high-frequency acoustic fields (mostly In the 10-300-kHz range), to quantify backscattering from the seafloor sediment, penetration into the sediment, and propagation within the sediment. In addition, spheres and other objects were used to gather data on acoustic detection of buried objects. The high-frequency acoustic interaction with the medium sand sediment was investigated at grazing angles both above and below the critical angle of about 30°. Detailed characterizations of the upper seafloor physical properties were made to aid in quantifying the acoustic interaction with the seafloor. Biological processes within the seabed and the water column were also investigated with the goal of understanding their impact on acoustic properties. This paper summarizes the topics that motivated the experiment, outlines the scope of the measurements done, and presents preliminary acoustics results  相似文献   

19.
Seabed outcrops of glaciodeltaic sediments were identified in four places east of Cape Cod, Massachusetts, during seismic-reflection, multibeam bathymetric and backscatter, bottom photographic, and sediment sampling surveys. These strata record coarser-grained ice-proximal glaciofluvial topset to finer-grained distal glaciolacustrine bottomset deposition within deltaic systems that prograded southwestward into glacial lakes from the South Channel lobe about 18 ka b.p. These beds are important because they (1) influence the outer Cape’s hydrogeologic framework, and (2) constitute relatively stable, locally rough habitats within an area of seafloor dominated by mobile sand and gravelly sediment, and benefit the benthic fauna by providing shelter and a substrate amenable to burrow construction.  相似文献   

20.
The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号