首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
吸力基础具有施工速度快、安装过程中受海况天气影响小且易于回收重复利用等优点,被广泛应用于海洋工程。当吸力基础作为海上风电塔架的基础时,常常承受较大的水平荷载,因此其水平承载力是设计的主控因素。介绍了海上风机基础的设计要求,分析了影响基础水平承载性状的因素,总结了吸力基础受水平单调荷载、水平循环荷载和不同荷载组合三个方面的研究现状。讨论了水平荷载的大小、水平加载的高度(偏心率)、循环荷载的频率、循环荷载的次数、循环荷载的幅值、循环荷载的方向性、竖向荷载对吸力基础水平承载性状的影响,考虑了水平荷载的非共线性,指出了目前研究的不足,明确了吸力基础水平承载性状进一步研究的方向,提出了供工程实践参考的建议。  相似文献   

2.
吸力基础是海洋工程中新型的一种基础型式,广泛应用于海洋平台、海洋浮动式结构等,近年来,也被作为浅海离岸风力发电工程的基础。吸力基础易遭受较大的水平动力荷载和弯矩,从而可能产生较大水平位移和转角;同时,由于海床冲刷,会降低其承载能力。为克服这些不足,提出了一种新型吸力基础———裙式吸力基础,把分析传统吸力基础砂土中的沉贯方法,拓广到裙式吸力基础中,研究该基础型式在砂土中的可沉贯性以及所需的吸力;并与同情况下的传统吸力基础进行了比较,证明了所提出的裙式吸力基础具有较好的沉贯性能,具有工程实践推广价值。  相似文献   

3.
为了得到桶基础承受风、浪动荷载的承载性能,结合我国东海地质条件,统计中国东海2010—2020年浅、深海风速和最大海浪数据,通过计算得到风浪荷载并制成ABAQUS软件幅值曲线施加到海上风电吸力桶基础上,分析了吸力桶基础在动荷载作用下的承载特性。结果表明:吸力桶基础受风、浪荷载影响明显,桶基础迎力面受到风浪动荷载产生拉拔现象。在浅海区,桶基础在风浪荷载作用下桶身自上而下变形不协调,风浪荷载最大的10月份桶基础迎力面最大位移超出了规范0.02D的限制,基础失稳;桶基础背力面受压变形较小。在深海区,桶基础在风浪荷载作用下桶身自上而下变形相对协调,施加风浪荷载后桶体迎力面最大位移为14.9 mm,整体上迎力面位移比背力面位移大4 mm,桶体处于稳定状态。相较浅海区的吸力桶单桶结构,深海区吸力桶结构由于尺寸增加,桶体的稳定性得到提高,说明吸力桶结构的尺寸对稳定性起决定性作用。  相似文献   

4.
用于海洋平台的吸力式桩桶基础作为一种新型平台基础正逐渐成为人们研究的重点。为研究吸力式桩桶单桩基础的受力特性,对V-H(竖向—水平)联合荷载作用下的吸力式单桩基础桩土的承载特性进行了数值模拟,并将数值模拟的有限元解通过与API规范中对p-y曲线的计算方法进行对比来验证有限元模型的可行性,最后采用分级作用力的加载方式对其破坏包络曲线进行绘制,并推导出相应的函数表达式。研究表明,采用ABAQUS有限元分析软件对吸力式桩桶进行数值模拟是可行的,随着对吸力式桩桶所施加V-H联合荷载的不断增大,吸力式桩桶所能体现的应力和弯矩极限值也在随之增大,其位移变化主要在施加荷载的区域附近,最后在联合荷载作用下所体现的极限承载状态,即包络曲线大致呈四分之一的椭圆形状。  相似文献   

5.
复合加载下桶形基础循环承载性能数值分析   总被引:1,自引:0,他引:1  
作为一种新型基础形式,吸力式桶形基础除了承受海洋平台结构及自身重量等竖向荷载的长期作用之外,往往还遭受波浪等所产生的水平荷载及其力矩等其它荷载分量的瞬时或循环作用。对复合加载模式下软土地基中桶形基础及其结构的循环承载性能尚缺乏合理的分析与计算方法。应用Andersen等对重力式平台基础及地基所建议的分析方法,基于软黏土的循环强度概念,在大型通用有限元分析软件ABAQUS平台上,通过二次开发,将软土的循环强度与Mises屈服准则结合,针对吸力式桶形基础,基于拟静力分析建立了复合加载模式下循环承载性能的计算模型,并与复合加载作用下极限承载性能进行了对比。由此表明,与极限承载力相比,桶形基础的循环承载力显著降低。  相似文献   

6.
海上风电作为一种清洁能源,其开发利用越来越受到世界各沿海国家的重视.吸力锚基础是海洋工程中的一种新型基础型式,广泛应用于海洋平台、海洋浮动式结构等.近年来,也被作为海上风电工程塔架的基础,此海上风电塔架的基础部分是整个工程结构的重要组成部分,它涉及到整个风电结构的安全性,是工程可靠运行的前提.在深入研究已有塔架的基础上...  相似文献   

7.
针对用于海上风力发电机的伞式吸力锚基础(USAF)实际条件下的受力特点,采用数值模拟方法,基于大型通用有限元软件ABAQUS构建数值计算模型,对伞式吸力锚基础在H-V、H-T、V-T荷载平面内以及H-V-T非共面复合加载模式下的承载特性进行分析,进而推导其破坏包络面数学表达式。分析中采用固定位移比加载法进行复合加载,并将桶顶位移作为失效破坏标准。结果表明:(1)拟定的应力归一化复合加载破坏包络面椭圆曲线方程可以较好地模拟不同主筒长径比USAF在不同荷载空间内的破坏包络面形式;(2)H-T空间内USAF复合承载性能随主筒长径比(L/D)的增大而提高,而H-V、V-T空间内变化不明显;(3)绘制了H-V-T空间内USAF三维破坏包络面,可根据实际受荷状态与包络面之间的相对位置关系,评价实际工况下伞式吸力锚基础的稳定性。  相似文献   

8.
文章以某风电场项目为背景,应用预应力锚杆对传统重力式海上风电基础结构进行优化,组成一种基于锚杆体系的重力式海上风电基础型式。采用ABAQUS软件对锚杆重力式基础结构进行受力分析,研究在正常工况和极端工况两种荷载条件下,结构的位移、应力变化情况以及地基的破坏形式。结果表明,预应力锚杆结构能够有效减小重力式海上风电基础在正常和极端受力工况下的水平位移、转角和沉降量,同时改变地基的破坏形式,有效提升结构的整体稳定性,该结构可为今后重力式海上风电基础的应用优化发展提供一定的参考。  相似文献   

9.
海上风电工程主要受到风、波浪及洋流等产生的水平循环荷载作用,本文研究楔形单桩基础在水平循环荷载作用下的变形规律,并探讨不同循环荷载对变形规律产生的影响,以确保风电设施正常运行。通过数值模拟建立海上风电单桩-海床模型,考虑土体超孔隙水压力的演变规律及土体致密规律,土体采用UBC3D-PLM本构模型。本文重点讨论并分析在不同水平循环荷载作用下楔形单桩基础与等截面单桩基础的桩周土体位移、塑性应变及桩基累计转角位移之间的差异。研究结果表明:楔形结构会降低桩周土体位移及塑性应变,使得楔形单桩基础旋转中心位置更低,产生倾覆的可能更小,当循环荷载比为0.7时,累计转角位移能减少41.86%;循环荷载越大,楔形单桩基础水平受荷特性越好,累计位移减少量的增长率越高。研究成果可为今后海上风电基础的选择与设计提供参考。  相似文献   

10.
海上风电基础是制约海上风电发展的一个重要因素,大力发展经济与效用兼备的新型基础刻不容缓。本文基于新型的海上风电伞式吸力锚基础(USAF)的已有结构,借助大型通用有限元软件ABAQUS构建出一系列不同尺寸的伞式吸力锚基础(USAF)有限元模型,并通过模态分析等动力分析得到最佳伞式吸力锚基础(USAF)结构尺寸,最后,将最佳伞式吸力锚基础(USAF)与常规单筒吸力锚基础在单一荷载下的极限承载力进行比较,证明了伞式吸力锚基础(USAF)具有良好的承载优势。  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

13.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

14.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

15.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.  相似文献   

16.
《海洋学报(英文版)》2014,(8):F0003-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,  相似文献   

17.
18.
19.
This article presents a methodology developed to evaluate the instability of submarine slopes that extend over a large area. Special attention was paid to (1) the complex geometry (bathymetry) and the expanse of the slope, (2) the heterogeneity of the sediment, and (3) the distribution of the pore pressure. The safety factor was considered as a spatially varying quantity. The General Formulation (GLE, Fredlund and Krahn 1977), which fully satisfies equilibrium conditions, was used for evaluating the stability of the marine slope. The submarine slope failure, which occurred on 16 October 1979 during the construction of the new Nice airport, was studied in order to test the developed model. Geotechnical parameters were taken from experimental tests carried out by IFREMER on 19 cores extracted at different depths (from 27 m to 1300 m) (Cochonat, Bourillet, and Savoye, 1993; Mulder et al., 1994). Many scenarios were proposed in order to explain the cause of the Nice slope failure (Habib, 1994). In this article, two of those scenarios were tested. Simulation results are presented and discussed.  相似文献   

20.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号