共查询到20条相似文献，搜索用时 62 毫秒
1.
赣南中生代淘锡坑钨矿区花岗岩锆石SHRIMP年龄及石英脉Rb-Sr年龄测定 总被引：31，自引：4，他引：31
江西省崇义县淘锡坑钨矿区位于南岭东西向构造带东段与武夷山北东—北北东向构造带南段的复合部位,属于以石英脉型黑钨矿为主的钨多金属矿床。矿床形成与燕山期中酸性岩浆作用有密切关系,石英矿脉受北西向断裂控制,穿切新元古代地层。文章选取钻孔揭露的底部新鲜花岗岩样品2件,用SHRIMP方法测定锆石的结晶年龄,结果分别为(158.7±3.9)Ma和(157.6±3.5)Ma;对3件含黑钨矿石英脉样品中石英的流体包裹体进行了Rb-Sr等时线年龄测定,结果分别为(154±4)Ma、(157±3)Ma和(161±4)Ma。与前人用Re-Os法测定的辉钼矿(154Ma)比较,发现花岗岩的成岩年龄与含矿石英脉、钨矿的形成年龄相同,成岩、成矿作用几乎同时完成。综合前人研究资料,认为南岭地区160~150Ma成岩成矿作用主要分布于南岭中东段,可能与岩石圈大规模伸展的构造动力学背景有关。 相似文献
2.
湖南湘东钨矿含矿石英脉辉钼矿Re-Os定年及地质意义 总被引：1，自引：0，他引：1
湘东钨矿是一个典型的石英脉型钨锡多金属矿床,发育百余条含矿石英脉,矿脉陡立,从北到南走向呈NE、NEE和EW向,反映了矿脉形成时处于近NW-SE向区域拉伸状态。矿区内的老山坳断层分割了重要的南、北两组矿脉。北组脉具有毒砂-黄铜矿-黑钨矿等矿物组合,富含金属硫化物,多具有平行脉壁的条带状构造;南组脉则主要体现辉钼矿-黑钨矿-黄铜矿-闪锌矿-方铅矿等矿物组合,金属硫化物含量较少,具有块状构造。本次研究通过对南组脉辉钼矿Re-Os同位素测年,获得等时线年龄为150.4±1.5 Ma(MSWD=0.52),模式年龄加权平均值为150.7±2.3 Ma(MSWD=0.10),代表成矿时间。含矿石英脉的形成略晚于区内燕山期二云母花岗岩(154.4±2.2 Ma)和煌斑岩(152.1±0.9 Ma)的侵位,指示含矿石英脉在成因上与燕山早期岩浆活动密切相关。事实上,包括湘东钨矿在内的南岭钨锡多金属成矿省均形成于165~150 Ma期间,具有统一的地球动力学背景,即由太平洋板块俯冲和俯冲板片断离所引起的弧后伸展环境。 相似文献
3.
4.
江西省武功山地区浒坑钨矿床的Re-Os年龄及其地质意义 总被引：2，自引：0，他引：2
浒坑钨矿床是位于江西省中部武功山成矿带的大型石英脉型黑钨矿床。为了确定该矿床的成矿时代,笔者选取了浒坑含钨石英脉中与黑钨矿共生的辉钼矿进行了高精度Re-Os同位素定年,并获得5个辉钼矿样品的Re-Os等时线年龄和模式加权平均年龄分别为150.2±2.2Ma和149.82±0.92Ma。测年数据表明浒坑钨矿床的成矿时代为150Ma左右,是华南地区中生代大规模成岩成矿作用高峰期的产物。辉钼矿含铼较低,表明成矿物质可能来自壳源,与形成浒坑花岗岩体的燕山期重熔S型花岗岩岩浆活动有关。该矿床形成于燕山期岩石圈伸展减薄环境。 相似文献
5.
江西省武功山地区浒坑钨矿床辉钼矿Re-Os年龄及其地质意义 总被引：7，自引：0，他引：7
浒坑钨矿床是位于江西省中部武功山成矿带的大型石英脉型黑钨矿床。为了确定该矿床的成矿时代,笔者选取了浒坑含钨石英脉中与黑钨矿共生的辉钼矿进行了高精度Re-Os同位素定年,并获得5个辉钼矿样品的Re-Os等时线年龄和模式加权平均年龄分别为150.2±2.2Ma和149.82±0.92Ma。测年数据表明浒坑钨矿床的成矿时代为150Ma左右,是华南地区中生代大规模成岩成矿作用高峰期的产物。辉钼矿含铼较低,表明成矿物质可能为地壳来源,与形成浒坑花岗岩体的燕山期重熔S型花岗岩岩浆活动有关。该矿床形成于燕山期岩石圈伸展减薄环境。 相似文献
6.
赣南兴国县张家地钼钨矿床成岩成矿时代及地质意义 总被引：1，自引：0，他引：1
地处EW向南岭成矿带和NE向武夷山成矿带叠置部位的赣南兴国-宁都钨锡矿集区产有多处不同矿化类型的钨锡多金属矿床,但总体研究程度较低。本文基于详细野外地质调查,重点开展了张家地钼钨矿床的高精度成岩成矿年代学研究,并探讨了区域钨锡矿床成岩成矿时空分布及地球动力学背景。张家地钼钨矿化产于花岗岩与震旦纪浅变质细碎屑岩的内、外接触带,包括石英脉型(王泥排矿段)和云英岩型(刘家庄矿段)两种矿化类型。利用SHRIMP锆石U-Pb法,获得张家地钼钨矿区似斑状中细粒黑云母花岗岩的年龄为154.1±1.8Ma;利用辉钼矿Re-Os法,获得王泥排矿段石英脉型矿体的辉钼矿Re-Os等时线年龄为158.4±3.1Ma、加权平均年龄为157.7±1.4Ma,刘家庄矿段云英岩型矿体的辉钼矿Re-Os等时线年龄为161.9±3.2Ma、加权平均年龄为157.9±1.6Ma,厘定矿床成岩成矿时代为晚侏罗世,对应于华南中生代第二次大规模成矿作用。石英脉型和云英岩型矿体中辉钼矿的铼含量均较低(9.58×10-6~22.65×10-6),表明成矿物质以壳源为主;综合分析区域最新年代学数据资料,表明钨锡矿床成岩成矿具多期性,主要集中在240~210Ma、170~150Ma和130~90Ma,以赣南和湘南为中心,钨锡矿床向四周成矿年龄均呈变小趋势。燕山期钨锡大规模成岩成矿作用主要形成于华南中生代岩石圈伸展-减薄时期的侏罗纪板内拉张的地球动力学背景。 相似文献
7.
粤北红岭钨矿中辉钼矿Re-Os同位素年代学及其地质意义 总被引：6，自引：3，他引：3
粤北红岭钨矿为产在热水复式岩体之中的中型钨多金属矿床,矿化类型为石英脉型黑钨矿化和蚀变花岗岩型白钨矿化.对矿区含矿石英脉中8个辉钼矿样品进行Re-Os同位素测定,获得等时线年龄及模式年龄的加权平均值分别为(159.1±1.5)Ma和(158.8±0.88)Ma.等时线纵截距为-0.010±0.041,说明样品中不存在可测定的初始187Os.统计表明南岭地区中东段钨锡矿床的成矿年龄多集中在150～160 Ma.粤北已有的几个钨矿成矿年龄与区域燕山期花岗岩大规模侵位时期一致,表明南岭地区花岗岩成岩成矿可能不存在明显的时差. 相似文献
8.
《华南地质与矿产》2015,(4)
雅山钨矿(W-Mo)和下桐岭钨钼铋铍矿(W-Mo-Bi-Be)是江西武功山地区典型的石英脉型钨矿床,二者的成矿元素组合略有差异,但二者的成矿时代是否存在差异尚不十分清楚。为了确定二者成矿年代,通过选取雅山钨矿和下桐岭钨矿石英脉中与黑钨矿伴生的辉钼矿进行了Re-Os同位素定年,获得了雅山钨矿3个辉钼矿Re-Os同位素等时线年龄和模式加权平均年龄分别为156.0±2.8 Ma和156.0±2.4 Ma;下桐岭钨矿4个辉钼矿Re-Os同位素等时线年龄和模式加权平均年龄分别为156.4±8.7 Ma和156.1±2.1 Ma;在误差范围内,说明二者的成矿时代基本一致。研究表明,雅山钨矿和下桐岭钨矿床与武功山地区浒坑钨矿成矿年代一致,与华南地区大规模钨锡成矿作用的时代基本一致(170~150 Ma),均形成于晚侏罗世。 相似文献
9.
湖南瑶岗仙钨矿成岩成矿作用年代学研究 总被引：32，自引：9，他引：23
湖南瑶岗仙钨矿床位于南岭东西构造带中部,加里东隆起带与印支-燕山凹陷带的交汇部位。区内出露地层有寒武系、泥盆系、石炭系和侏罗系,其中寒武系和泥盆系为含矿的主要层位。矿体赋存于燕山早期花岗岩体内外接触带。笔者在前人对矿床的地质构造、岩石地球化学以及同位素年代学等方面研究的基础上,采用SHRIMP铀-铅、铷-锶等时线和铼-锇等时线定年方法,对瑶岗仙花岗岩体及赋存于岩体内外接触带的黑钨矿-石英脉进行精确定年,获得岩体锆石SHRIMP铀-铅年龄为(170.7±2.2)Ma(置信度95%,n=12,MSWD=1.7),产于岩体外接触带寒武系地层中的黑钨矿-石英脉年龄为(175.8±4.1)Ma(置信度95%,MSWD=0.88),产于岩体内接触带的黑钨矿-石英脉年龄为(156±3)Ma(置信度95%,MSWD=0.20),产于外接触带石英脉中的辉钼矿年龄为(170±5)Ma。测定结果表明,瑶岗仙钨矿床的形成至少经历了两个成矿期,分别对应于J1/J2过渡期与J2/J3过渡期。今后的深部找矿工作尤其是杨梅岭矿段深部应该注意寻找两个时期分别形成的石英脉型和矽卡岩型矿体。 相似文献
10.
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献