首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 187 毫秒
1.
Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran   总被引：1，自引：1，他引：1  
The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.  相似文献   

2.
Fluid inclusions trapped in quartz veins hosted by a leucogneiss from the southern part of the Naxos Metamorphic Core Complex (Attic‐Cycladic‐Massif, Greece) were studied to determine the evolution of the fluid record of metamorphic rocks during their exhumation across the ductile/brittle transition. Three sets of quartz veins (V‐M2, V‐BD & V‐B) are distinguished. The V‐M2 and V‐BD are totally or, respectively, partially transposed into the foliation of the leucogneiss. They formed by hydrofracturing alternating with ductile deformation accommodated by crystal‐plastic deformation. The V‐B is discordant to the foliation and formed by fracturing during exhumation without subsequent ductile transposition. Fluids trapped during crystal–plastic deformation comprise two very distinct fluid types, namely a CO2‐rich fluid and a high‐salinity brine, that are interpreted to represent immiscible fluids generated from metamorphic reactions and the crystallization of magmas respectively. They were initially trapped at ～625 °C and 400 MPa and then remobilized during subsequent ductile deformation resulting in various degrees of mixing of the two end‐members with later trapping conditions of ～350 °C and 140 MPa. In contrast, brittle microcracks contain aqueous fluids trapped at 250 °C and 80 MPa. All veins display a similar δ13C pointing to carbon that was trapped at depth and then preserved in the fluid inclusions throughout the exhumation history. In contrast, the δD signature is marked by a drastic difference between (i) V‐M2 and V‐BD veins that are dominated by carbonic, aqueous‐carbonic and high‐salinity fluids of metamorphic and magmatic origin characterized by δD between ?56‰ and ?66‰, and (ii) V‐B veins that are dominated by aqueous fluids of meteoric origin characterized by δD between ?40‰ and ?46‰. The retrograde P–T pathway implies that the brittle/ductile transition separates two structurally, chemically and thermally distinct fluid reservoirs, namely (i) the ductile crust into which fluids originating from crystallizing magmas and fluids in equilibrium with metamorphic rocks circulate through a geothermal gradient of 30 °C km?1 at lithostatic pressure, and (ii) the brittle upper crust through which meteoric fluids percolate through a high geothermal gradient of 55 °C km?1 at hydrostatic pressure.  相似文献   

3.
The Sierra Ballena Shear Zone (SBSZ) is part of a high-strain transcurrent system that divides the Neoproterozoic Dom Feliciano Belt of South America into two different domains. The basement on both sides of the SBSZ shows a deformation stage preceding that of the transcurrent deformation recognized as a high temperature mylonitic foliation associated with migmatization. Grain boundary migration and fluid-assisted grain boundary diffusion enhanced by partial melting were the main deformation mechanisms associated with this foliation. Age estimate of this episode is >658 Ma. The second stage corresponds to the start of transpressional deformation and the nucleation and development of the SBSZ. During this stage, pure shear dominates the deformation, and is characterized by the development of conjugate dextral and sinistral shear zones and the emplacement of syntectonic granites. This event dates to 658–600 Ma based on the age of these intrusions. The third stage was a second transpressional event at about 586 to <560 Ma that was associated with the emplacement of porphyry dikes and granites that show evidence of flattening. Deformation in the SBSZ took place, during the late stages, under regional low-grade conditions, as indicated by the metamorphic paragenesis in the supracrustals of the country rocks. Granitic mylonites show plastic deformation of quartz and brittle behavior of feldspar. A transition from magmatic to solid-state microstructures is also frequently observed in syntectonic granites. Mylonitic porphyries and quartz mylonites resulted from the deformation of alkaline porphyries and quartz veins emplaced in the shear zone. Quartz veins reflect the release of silica associated with the breakdown of feldspar to white mica during the evolution of the granitic mylonites to phyllonites, which resulted in shear zone weakening. Quartz microstructures characteristic of the transition between regime 2 and regime 3, grain boundary migration and incipient recrystallization in feldspar indicate deformation under lower amphibolite to upper greenschist conditions (550–400°C). On the other hand, the mylonitic porphyries display evidence of feldspar recrystallization suggesting magmatic or high-T solid-state deformation during cooling of the dikes.  相似文献   

4.
The grain‐scale spatial arrangement of melt in layer‐parallel leucosomes in two anatectic rocks from two different contact aureoles located in central Maine, USA, is documented and used to constrain the controls on grain‐scale melt localization. The spatial distribution of grain‐scale melt is inferred from microstructural criteria for recognition of mineral pseudomorphs after melt and mineral grains of the solid matrix that hosted the melt. In both rocks, feldspar mimics the grain‐scale distribution of melt, and quartz is the major constituent of the solid matrix. The feldspar pockets consist of individual feldspar grains or aggregates of feldspar grains that show cuspate outlines. They have low average width/length ratios (0.54 and 0.55, respectively), and are interstitial between more rounded and equant (width/length ratios 0.65 for both samples) quartz grains. In two dimensions, the feldspar pockets extend over distances equivalent to multiple quartz grain diameters, possibly forming a connected three‐dimensional intergranular network. Both samples show similar mesoscopic structural elements and in both samples the feldspar pockets have a shape‐preferred orientation. In one sample, feldspar inferred to replace melt is aligned subparallel to the shape‐preferred orientation of quartz, indicating that pre‐ or syn‐anatectic strain controlled the grain‐scale distribution of melt. In the other sample, the preferred orientation of feldspar inferred to replace melt is different from the orientations of all other mesoscopic or microscopic structures in the rock, indicating that differential stress controlled grain‐scale melt localization. This is probably facilitated by conditions of higher differential stress, which may have promoted microfracturing. Grain‐scale melt distribution and inferred melt localization controls give insight into possible grain‐scale deformation mechanisms in melt‐bearing rocks. Application of these results to the interpretation of deep crustal anatectic rocks suggests that grain‐scale melt distribution should be controlled primarily by pre‐ or syn‐anatectic deformation. Feedback relations between melt localization and deformation are to be expected, with important implications for deformation and tectonic evolution of melt‐bearing rocks.  相似文献   

5.
最近,在大别造山带东部发现了广泛的地震成因假玄武玻璃,这些假玄武玻璃主要呈简单脉状沿NE-SW向走滑断裂带或剪切带发育,后者大多与郯庐断裂带平行并穿切了包括白垩纪花岗岩在内的地质体。某些假玄武玻璃内发育由暗色石英条纹构成的糜棱质条带。本文通过普通光学显微镜和扫描电镜观察分析,详细研究对比了不同断裂带内部发育的假玄武玻璃及其围岩在显微构造特征上的差异及联系。根据岩石的组构特征,证实所发现的这些假玄武玻璃主要是由母岩的超碎裂岩化形成的,但在点1发育的假玄武玻璃基质的扫描电镜影象特征上,沿某些残斑矿物(钾长石、斜长石、黄铁矿)的边缘可以看到些许代表摩擦熔融成因的熔蚀状港湾结构,说明假玄武玻璃形成过程中曾经发生了程度较低的局部熔融作用。肉眼所见到的糜棱质石英条纹在显微镜下证实为早期的糜棱面理。同时,岩石组构的叠加显示,含假玄武玻璃的断裂带及假玄武玻璃本身普遍具有多期性,且晚期构造产物(或假玄武玻璃)总是较早期产物(或假玄武玻璃)碎裂岩化作用更加强烈,说明先期存在的构造软化带在控制假玄武玻璃形成过程中起着非常重要的作用,即构造带抬升过程中伴随的多期构造及细粒化是形成假玄武玻璃的基础。岩石的变形序列总体上显示为韧性-韧脆性-脆性的演化过程,从而证实了这些假玄武玻璃总体上形成于造山带抬升过程,而不是早期的俯冲过程。  相似文献   

6.
Faults in the upper crust initiate from pre-existing (inherited) or precursory (early-formed) structures and typically grow by the mechanical interaction and linkage of these structures. In crystalline rock, rock architecture, composition, cooling, and exhumation influence the initiation of faults, with contrasting styles observed in plutonic rocks, extrusive igneous rocks, and foliated metamorphic rocks. Brittle fault growth in granitic rock is commonly controlled by the architecture of inherited joints or preexisting dikes. In basalt, abundant joints control the surface expression of faulting, and enhanced compliance due to abundant joints leads to folding and deformation asymmetry in the fault zone. Highly reactive mafic minerals likely become rapidly evolving fault rocks. In foliated metamorphic rocks, fault initiation style is strongly influenced by strength anisotropy relative to the principal stress directions, with fracturing favored when the foliation is aligned with the directions of principal stress. The continuity of micas within the foliation also influences the micromechanics of fault initiation. Brittle kink bands are an example of a strain-hardening precursory structure unique to foliated rock. Each of these fault initiation processes produces different initial fault geometry and spatial heterogeneity that influence such properties as fault permeability and seismogenesis.  相似文献   

7.
Significant gold deposits in the western Tanami region of Western Australia include deposits in the Bald Hill and Coyote areas. The ca. 1,864 Ma Bald Hill sequence of turbiditic and mafic volcanic rocks hosts the Kookaburra and Sandpiper deposits and a number of smaller prospects. The ca. 1,835 Ma turbiditic Killi Killi Formation hosts the Coyote deposit and several nearby prospects. The Kookaburra deposit forms as a saddle reef within a syncline, and the Sandpiper deposit is localized within graphitic metasedimentary rocks along a limb of an anticline. Gold in these deposits is hosted by anastomosing quartz–(–pyrite–arsenopyrite) veins within quartz–sericite schist with disseminated arsenopyrite, pyrite, and marcasite (after pyrrhotite). Based on relative timing relationships with structural elements, the auriferous veins are interpreted to have been emplaced before or during the ca. 1,835–1,825 Ma Tanami Orogeny (regional D1). Gold deposition is thought to have been caused by pressure drops associated with saddle reef formation (Kookaburra) and chemical reactions with graphitic rocks (Sandpiper). The Coyote deposit, the largest in the western Tanami region, consists of a number of ore lenses localized along the limbs of the Coyote Anticline, which formed during the Tanami Orogeny. The largest lenses are associated with the Gonzalez Fault, which is located along the steeply dipping southern limb of this fold. Gold was introduced at ca. 1,790 Ma into dilatant zones that formed in local perturbations along this fault during later reactivation (regional D5) towards the end of a period of granite emplacement. Gold is associated with quartz–chlorite–pyrite–(arsenopyrite–galena–sphalerite) veins with narrow (<?5 mm) chloritic selvages. A quartz–muscovite–biotite–K–feldspar–(tourmaline–actinolite–arsenopyrite) assemblage, which is interpreted to relate to granite emplacement, overprints the regional greenschist facies metamorphic assemblage. The mineralogical similarity between this overprinting assemblage and the vein assemblage suggests that the auriferous veins at the Coyote deposit are associated with the granite-related metamorphic–metasomatic assemblage. Gold deposition is thought to have been caused by pressure drops within dilatant zones.  相似文献   

8.
A metamorphic field gradient has been investigated in the Moldanubian zone of the central European Variscides encompassing, from base to the top, a staurolite–kyanite zone, a muscovite–sillimanite zone, a K‐feldspar–sillimanite zone, and a K‐feldspar–cordierite zone, respectively. The observed reaction textures in the anatectic metapsammopelites of the higher grade zones are fully compatible with experimental data and petrogenetic grids that are based on fluid‐absent melting reactions. From structural and microstructural observations it can be concluded that the boundary between the kyanite–staurolite zone and the muscovite‐ and K‐feldspar–sillimanite zones coincides with an important switch in deformation mechanism(s). Besides minor syn‐anatectic shearing (melt‐enhanced deformation), microstructural criteria point (a) to a switch in deformation mechanism from rotation recrystallization (climb‐accommodated dislocation creep) to prism slip and high‐temperature (fast) grain boundary migration in quartz (b) to the activity of diffusion creep in quartz–feldspar layers, and (c) to accommodation of strain by intense shearing in fibrolite–biotite layers. It is suggested that any combination of these deformation mechanisms will profoundly affect the rheological characteristics of high‐grade metamorphic rocks and significantly lower rock strength. Hence, the boundary between these zones marks a major rheological barrier in the investigated cross section and probably also in other low‐ to medium‐pressure/high‐temperature areas. At still higher metamorphic grades (K‐feldspar‐cordierite zone), where the rheologically critical melt percentage is reached, rock rheology is mainly governed by the melt and other deformation mechanisms are of minor importance. In the study area, the switch in deformation mechanism(s) is responsible for large‐scale strain partitioning and concentration of deformation within the higher‐temperature hanging wall during top‐to‐the‐S thrusting, thus preserving a more complete petrostructural record within the rocks of the footwall including indications for a ?Devonian high‐ to medium‐pressure/medium‐temperature metamorphic event. Thrusting is accompanied by diapiric ascent of diatexites of the K‐feldspar‐cordierite zone and infolding of the footwall, suggesting local crustal overturn in this part of the Moldanubian zone.  相似文献   

9.
A well preserved strain and reaction gradient records the progressive transformation of a megacrystic Kfs+Cpx+Opx+Bt1±Qtz syenitic pluton to a strongly sheared Kfs+Act+Bt2+Ab+Qtz tectonite within the exhumed Norumbega Fault System, Maine, USA. Detailed microstructural analysis indicates that fracturing and localized fluid infiltration initiated the deconstruction of the existing K-feldspar and two-pyroxene load-bearing framework, and that feedback among metamorphic reactions, fabric development and enhanced permeability during progressive shearing led to the development of an interconnected, biotite- and actinolite-rich foliation. The activation of dislocation creep in biotite and quartz, and dissolution–precipitation creep in actinolite and feldspar, with increasing strain ultimately resulted in a transition from dominantly frictional to dominantly viscous deformation processes. Petrological data show that various scales of geochemical disequilibrium exist across the strain and reaction gradient, and that reaction progress was limited by slow chemical diffusion during the early stages of deformation. Petrological modelling results indicate that the existing plutonic assemblage was metastable at mid-crustal conditions, and that fluid infiltration and deformation allowed the product assemblage to advance towards chemical equilibration. Comparison of the observed microstructures and deformation mechanisms with experimental and numerical modelling results suggest that the development of an interconnected biotite-dominated fabric probably caused a major (up to three fold) reduction in bulk rock strength and localization of strain into the foliated margin.  相似文献   

10.
银洞沟银金矿矿床地质特征及成因探讨   总被引：2，自引：0，他引：2  
雷世和 《地质与勘探》1998,34(4):13-19,33
就构造对该矿的控岩控矿作用和围岩蚀变等进行了探讨,揭示了早期 层次滑脱构造控制了初放源层的形成、韧－脆性推覆型剪切作用控制了含矿石英脉的形成,  相似文献   

11.
Three sheet‐like bodies of felsic gneiss containing abundant K‐feldspar megacrysts (megacrystic felsic gneiss, augen gneiss or granite gneiss) surrounding the Broken Hill Line of Lode in western New South Wales, Australia, are inferred to be pre‐ to syn‐D1 granitoids. We interpret the Feral gneiss to be a pre‐ to early syn‐D1 intrusion, as it contains S1 as its earliest foliation. However, it has no magmatic flow foliation. The Alma Gneiss, and the megacrystic portions of the Rasp Ridge Gneiss, northwest of the Line of Lode, both contain S1 parallel to a magmatic flow foliation, and are interpreted as having been magmatic during D1. Therefore, the Alma and Rasp Ridge Gneisses may have been intruded during D1, probably just after the Feral gneiss, as the Alma Gneiss intrudes the Feral gneiss. S1 in the augen gneisses and the wall rocks is defined by biotite, sillimanite, garnet and ribbon quartz, and indicates that high‐grade metamorphic conditions accompanied D1. Evidence suggesting that these rocks were originally granitoids includes: (i) the Alma Gneiss transecting and intricately intruding the Feral gneiss, the contacts being transected by S1; (ii) euhedral to subhedral K‐feldspar porphyroclasts (former phenocrysts), especially those with concentrically arranged inclusions; (iii) microgranitoid enclaves, particularly where megacrystic and relatively large; (iv) aplite dykes (most common in plutonic rocks and therefore reliable indicators); (v) metasedimentary xenoliths; (vi) magmatic flow foliations overprinted by parallel tectonic foliations; and (vii) chemical affinities with undoubted Australian Proterozoic granitoids. Therefore, felsic gneisses at Broken Hill should not be used for stratigraphic correlation, unless they can be definitely determined to be of volcanic flow or tuffaceous origin. The inferred intrusion of granitoids early in the tectonic history of the Broken Hill Block suggests that they may have contributed to the metamorphic and/or hydrothermal heat, and may have helped concentrate metals to form orebodies.  相似文献   

12.
Contrasting ductility is recognized in the rocks of Cretaceous Ryoke metamorphic belt in Iwakuni area, southwest Japan. Pelitic schist is ubiquitous in the region and differences in mineral assemblages mark increase in metamorphic grade. The area has been graded as chlorite-biotite zone in the north progressing into biotite- and muscovite-cordierite zones in the south. Pelitic schist near the boundary between the biotite- and muscovite-cordierite zones has undergone partial silicification to form whitish silicified schist layers which contain two types of quartz veins: those parallel to foliation in the host rock are called schistosity-concordant veins, and those inclined to host rock foliation, schistosity-discordant veins. In this study we examined the quartz structure in the silicified schist and in both types of veins to understand the ductility contrast induced by the silicification process. Crystallographic orientations of quartz in the veins and silicified schist rocks were studied using the Scanning Electron Microscopy (SEM) based Electron Back Scatter Diffraction (EBSD) technique. Quartz c-axis orientations in the silicified schist are nearly random, demonstrating an absence of post-silicification ductile deformation. Quartz grains in the schistosity-concordant veins have preferred c-axis orientations perpendicular to the schistosity indicating ductile shortening. In contrast, schistosity-discordant veins display distinct quartz c-axis fabric than that found in the schistosity-concordant veins. This is because the two types of host rocks exhibit a difference in ductility during deformation. The presence of deformed quartz veins in the undeformed silicified schist indicates transformation of the ductile pelitic schist into the brittle silicified schist at mid-crustal levels where these rocks originate, hence forming contrasting rock layers. Schistosity-concordant veins in the biotite-rich pelitic schist deformed with its host rock in a ductile manner while the schistosity-discordant veins in the neighboring silicified schist were left intact. Silicification of the pelitic schist may have been caused by the silica-rich geofluids produced by subsurface processes. Geofluids responsible for the occurrence of such mechanically contrasting layers mark an increase in seismic reflectivity at mid-crustal depths and may be potential reflectors of seismic waves giving rise to the so-called “bright spots”.  相似文献   

13.
The rheology of layered meta-sedimentary rocks, and their orientation and position relative to major fault systems were the key controls on Proterozoic hydrothermal copper mineralization at Mount Isa, Australia. Compositional layering in the host rock partitioned mechanical behavior and strain, leading to selective permeability generation and the focusing of fluid flow. Shale layers preferentially failed by plastic shearing, whereas meta-siltstones remained elastic or failed in tension depending on magnitude of deformation and fluid pressure. Numerical simulations support the hypothesis that the orientation of layering and the proximity to major fault systems controlled fracturing and permeability increase in the Urquhart shale. The dilating shale provided a pathway for an upward-flowing, reduced basement fluid, from which quartz was precipitated during cooling. During a later event, the reactivation of steep structures provided access to surface derived oxidized metal-bearing brine, causing the precipitation of dolomite followed by chalcopyrite ore in the brecciated silicified shale.  相似文献   

14.
In this paper orientations of quartz veins from the Archaean age lode-gold bearing region of Gadag (southern India) are used to determine the relative stress and fluid pressure (Pf) conditions by constructing 3-D Mohr circle. Anisotropy of magnetic susceptibility (AMS) analysis of the host massive metabasalt reveals that the magnetic foliation is NW–SE striking, which is related to early NE–SW compression (D1/D2 deformation) that affected the region. The quartz veins have a wide range of orientations, with NW–SE striking veins (steep northeasterly dips) being the most prominent. Vein emplacement is inferred to have taken place under NW–SE compression that is known to have caused late deformation (D3) in the region. It is argued that the NW–SE fabric defined the pre-existing anisotropy and channelized fluid flow during D3. The permeability was initially low, which resulted in high Pf (>σ2). 3-D Mohr circle analysis indicates that the driving pressure ratio (R′) was 0.94, a condition that favoured fracturing and reactivation of fabric elements (foliations and fractures) having a wide range of orientations. This led to an increase in permeability and fluid flowed (burped) into the fractures. Resulting vein emplacement and sealing of fractures led to a reduction of Pf (<σ2). It is argued that at this low Pf, NW–SE oriented structures continued to remain susceptible to reactivation and vein emplacement, while fractures of all other orientations were inactive and remained sealed. As a consequence, the study area has a cluster of NW–SE oriented veins. R′ is calculated to be 0.07 from 3-D Mohr circle analysis at low Pf, when fractures with NW–SE orientation only were susceptible to dilation. However, it is envisaged that any emplacement of veins in these fractures would have sealed them, thus reducing the permeability and initiating the next cycle of rise in Pf (>σ2). Thus, it is concluded that the quartz veins in the Gadag region are a consequence of an interplay between conditions that fluctuated from Pf > σ2 to Pf < σ2.  相似文献   

15.
Gold mineralization in the West Hoggar shear zone,Algeria   总被引：1，自引：0，他引：1  
The Amesmessa gold prospect is located along a vertical N-S-trending crustal-scale ductile shear zone; stretching lineations are subhorizontal. This major shear zone is a Late Pan African dextral strike-slip fault of the Pharusian Belt of the Tuareg Shield (Algeria). The Amesmessa shear zone is asymmetric: strong thermal and deformational gradients are present along its western border where biotitic ultramylonites are in contact with a rigid Archean complex (In Ouzzal block), whereas there is a progressive gradation, through mylonite then protomylonite, to the Proterozoic gneiss of the Eastern block which displays co-axial Pan African structures. The Amesmessa shear zone is characterized by the presence of a felsic dike complex emplaced during shearing, and forming the most important parent material for ultramylonites. Basic magmas and carbonatites also intruded within the shear zone. The gold-rich quartz veins are located within the ultramylonitic western part of the shear zone. These N-S-trending laminated quartz veins formed during the late increments of shearing (plastic/brittle transition), by repeated syntectonic hydraulic fracturing along zones of rheological contrast parallel to foliation. The ore mineral association (pyrite, galena, native gold, sphalerite) crystallized in the deformed quartz matrix along late shear planes. Undeformed E-W trending banded quartz veins are present in the mylonitic eastern part of the shear zone; their gold content is low and no native gold has been observed. A strong hydrothermal alteration resulted in the development (along the walls of the N-S gold-bearing quartz veins) of a 5-m-wide carbonate-sericite-albite-pyrite secondary mineral association which implies an important CO2 supply and moderate temperature conditions. There is no alteration halo around the E-W quartz veins. Ultramylonites, hydrothermally altered rocks and quartz veins display similar REE patterns characterized by strong LREE enrichments. Shear-related fluids could be likely parental fluids for the Amesmessa gold mineralization and the associated hydrothermal alteration. Hydrothermal fluids were drawn into dilation zones and filled opening fractures along the main planar discontinuity of the most deformed rocks. The supply of CO2 may come from a deep-seated source as suggested by the presence of carbonatite dikes in the shear zones and the existence of CO2-H2O-rich fluid inclusions in quartz. The location of the gold-bearing quartz veins in the western part of the shear zone can be explained by the presence of strong thermal and rheological gradients.  相似文献   

16.
Melt infiltration into quartzite took place due to generation and migration of partial melts within the high‐grade metamorphic rocks of the Big Cottonwood (BC) formation in the Little Cottonwood contact aureole (UT, USA). Melt was produced by muscovite and biotite dehydration melting reactions in the BC formation, which contains pelite and quartzite interlayered on a centimetre to decimetre scale. In the migmatite zone, melt extraction from the pelites resulted in restitic schollen surrounded by K‐feldspar‐enriched quartzite. Melt accumulation occurred in extensional or transpressional domains such as boudin necks, veins and ductile shear zones, during intrusion‐related deformation in the contact aureole. The transition between the quartzofeldspathic segregations and quartzite shows a gradual change in texture. Here, thin K‐feldspar rims surround single, round quartz grains. The textures are interpreted as melt infiltration texture. Pervasive melt infiltration into the quartzite induced widening of the quartz–quartz grain boundaries, and led to progressive isolation of quartz grains. First as clusters of grains, and with increasing infiltration as single quartz grains in the K‐feldspar‐rich matrix of the melt segregation. A 3D–μCT reconstruction showed that melt formed an interconnected network in the quartzites. Despite abundant macroscopic evidence for deformation in the migmatite zone, individual quartz grains found in quartzofeldspathic segregations have a rounded crystal shape and lack quartz crystallographic orientation, as documented with electron backscatter diffraction (EBSD). Water‐rich melts, similar to pegmatitic melts documented in this field study, were able to infiltrate the quartz network and disaggregate grain coherency of the quartzites. The proposed mechanism can serve as a model to explain abundant xenocrysts found in magmatic systems.  相似文献   

17.
Microstructural analysis and microthermometry are useful methods for determining the deformation evolution. To address this issue, rheological behavior of quartz, feldspar and calcite in veins and host rocks during deformation, are presented in the mylonite zone of the dextral reverse Zamanabad Shear Zone (ZSZ), in northern part of Sistan Suture Zone (SSZ), in east of Iran. Microstructure evidences revealed two evolution stages of high and low temperature deformation. Quartz microstructures in the ZSZ show abundant evidences for early high-temperature plastic deformation (e.g. Bulging recrystallization (BLG)) which are as microstructures with SW directed ductile shearing in the central parts of the ZSZ. This shear zone shows progressively decreasing strain away from the central of shear zone toward the wall. High-temperature microstructures are overprinted partly or completely during shearing by the later low-temperature deformation (e.g. Pressure solution, fractures, veinlets). Microstructural observations of veins (quartz and calcite) confirms the results of microstructures in the host rock, as quartz veins occurred from peak metamorphic conditions (<400°C) and then in lower P–T conditions have been formed calcite veins (~250°C). According to microthermometric studies, two primary fluid groups are observed in quartz veins: (1) fluids trapped during peak deformation conditions, with higher-salinity, They were initially trapped at ~300–400°C, (2) smaller fluids by trapping of low-salinity inclusions at ~240–180°C that related to subsequent phases of shear zone exhumation in lower deep. Microthermometry results and microstructural analysis indicate deformation under lower greenschist facies conditions for the ZSZ, and then exhumation of the early of high-temperature rocks within regime of ductile-brittle transition to brittle.  相似文献   

18.
The microfabrics of folded quartz veins in fine‐grained high pressure–low temperature metamorphic greywackes of the Franciscan Subduction Complex at Pacheco Pass, California, were investigated by optical microscopy, scanning electron microscopy including electron backscatter diffraction, and transmission electron microscopy. The foliated host metagreywacke is deformed by dissolution–precipitation creep, as indicated by the shape preferred orientation of mica and clastic quartz without any signs of crystal‐plastic deformation. The absence of crystal‐plastic deformation of clastic quartz suggests that the flow stress in the host metagreywacke remained below a few tens of MPa at temperatures of 250–300 °C. In contrast, the microfabric of the folded quartz veins indicates deformation by dislocation creep accompanied by subgrain rotation recrystallization. For the small recrystallized grain size of ～8 ± 6 μm, paleopiezometers indicate differential stresses of a few hundred MPa. The stress concentration in the single phase quartz vein is interpreted to be due to its higher effective viscosity compared to the fine‐grained host metagreywacke deforming by dissolution–precipitation creep. The fold shape suggests a viscosity contrast of one to two orders of magnitude. Deformation by dissolution–precipitation creep is expected to be a continuous process. The same must hold for folding of the vein and deformation of the vein quartz by dislocation creep. The microfabric suggests dynamic recrystallization predominantly by subgrain rotation and only minor strain‐induced grain boundary migration, which requires low contrasts in dislocation density across high‐angle grain boundaries to be maintained during climb‐controlled creep at high differential stress. The record of quartz in these continuously deformed veins is characteristic and different from the record in metamorphic rocks exhumed in seismically active regions, where high‐stress deformation at similar temperatures is episodic and related to the seismic cycle.  相似文献   

19.
Ductilely deformed veins consisting of quartz+andalusite, in which the andalusite is partially replaced by fibrous sillimanite, locally occur in garnet–sillimanite schist near a margin of the Niğde metamorphic core complex in south-central Turkey. Mineral assemblages, reaction textures and structural features of the veins record low-pressure–high-temperature deformation during exhumation of mid-crustal rocks. The partial replacement of andalusite by sillimanite may indicate a late-stage increase in temperature and/or fluid pressure, possibly related to Miocene magmatism, during extensional unroofing of the core complex. Aluminosilicate-bearing veins are observed at the eastern margin of the massif where metapelitic rocks were deformed during unroofing of the core complex. Veins formed in aluminous rocks where deformation-enhanced permeability allowed fluid flow during extensional shear. The cm-scale veins are typically boudinaged and form asymmetric lenses concordant with the host rock foliation and are parallel to the down-dip lineation defined by sillimanite and stretched biotite. Aluminosilicate-bearing boudins record top-to-the-east shear sense, which is compatible with the extensional shear sense displayed by structures in the host rock.  相似文献   

20.
Previous studies [O'Kane, A., Onasch, C.M., Farver, J., 2007. The role of fluids in low-temperature, fault-related deformation of quartz arenite. Journal of Structural Geology 29, 819--836; Cook, J., Dunne, W.M., Onasch, C.M., 2006. Development of a dilatant damage zone along a thrust relay in a low-porosity quartz arenite, Journal of Structural Geology 28, 776–792] found that quartz arenite within two fault zones in the Appalachian foreland thrust belt displays very different structural styles and histories despite deforming at similar pressures and temperatures during the Alleghanian orogeny. A comparison of the grain-scale deformation and fluid histories using transmitted and cathodoluminescence microscopy and fluid inclusion microthermometry, shows that fluid composition was a controlling factor for causing these differences. The Cove fault zone deformed in the presence of aqueous fluids, first a CaCl2 brine and then an iron-rich fluid. The precipitation of quartz cement from the brine kept pace with brittle deformation, maintaining overall rock cohesion in the fault zone. The introduction of iron-rich fluids caused a switch from precipitation to dissolution of quartz, along with precipitation of goethite. In a damage zone along a backthrust in the Cave Mountain anticline, early deformation occurred in the presence of an aqueous fluid from which quartz was precipitated. The latest deformation, however, occurred in the presence of a methane-rich fluid, which inhibited the precipitation of quartz cement producing porous breccias and open fractures despite deformation at 6 km depth. Fluid composition not only affected cementation in the fault zones, but also the selection of grain-scale deformation mechanisms. Therefore, it is a controlling factor in determining the behavior and strength of these fault zones.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号