共查询到20条相似文献，搜索用时 31 毫秒
1.
解决潜水蒸发问题的阿维里扬诺夫经验公式在地下水数值模型中的应用——以格尔木河流域为例 总被引：1，自引：0，他引：1
数值模型对地下水流和溶质运移等问题进行模拟的方法以其有效性、灵活性和相对廉价性逐渐成为地下水研究领域的一种不可缺少的重要方法。在地下水浅埋区,蒸发是地下水的主要排泄方式之一,而地下水埋深是影响蒸发度的敏感因子,因此,数值模型中对地下水埋深的拟合精度,将直接影响地下水数值模拟模型的精度。本文以格尔木河流域为例,通过阿维里扬诺夫经验公式的线性与非线性模型的计算结果对比,来说明如何利用蒸发的数学模型提高模拟精度。 相似文献
2.
模拟裂隙多孔介质中变饱和渗流的广义等效连续体方法 总被引：2，自引：0，他引：2
描述了一种计算裂隙多孔介质中变饱和渗流的广义等效连续体方法。这种方法忽略裂隙的毛细作用,设定一个与某孔隙饱和度相对应的综合饱和度极限值,并假定：（1）如果裂隙多孔介质的综合饱和度小于该极限值,水只在孔隙中存在并流动,而裂隙中则没有水的流动;（2）如果综合饱和度等于或大于该极限值,水将进入裂隙,并在裂隙内运动。分析比较了等效连续体模型的不同计算方法,并给出了一个模拟裂隙岩体中变饱和渗流与传热耦合问题的应用算例。结果表明,所述方法具有一般性,可以有效地模拟裂隙多孔介质中变饱和渗流的基本特征。 相似文献
3.
地质统计学方法在地下水水位估值中应用 总被引：7，自引：0，他引：7
对于许多区域水资源或水环境问题,地下水水流模拟往往要采用数值方法,需给出每个节点上初始水位值,以反映流场的初始状态。另外,地下水水位动态长期监测分析,需由观测点水位估计任一点的水位。文中阐述了地下水水位估值的地质统计学方法－泛克立格法原理,以河南省焦作市修武段地下水数值模拟分析区为例,分析了用一次、二次漂移的泛克立格方法模拟地下水初始流场的估值情况和对真实流场特征的反映情况。指出在进行区域地下水位 相似文献
4.
为了确定巴丹吉林沙漠潜水蒸发强度与地下水埋深的关系,基于巴丹吉林沙漠的气候背景、砂土特征和不同地下水埋深时的典型植被特点设计了54种情景,利用Hydrus-1D建立不同情景下的SPAC水分运移模型,对周期性气象条件驱动下的潜水蒸发开展数值模拟。模拟结果表明:多年平均潜水蒸发量有着随地下水埋深增大而非线性减小的趋势;不同情景的极限埋深都大于3m,在埋深等于3m时潜水蒸发量都小于最大值的5%;当地下水埋深为0.5~1.5m时,潜水蒸发量对地下水埋深的变化最为敏感;当地下水埋深为1m时,潜水蒸发量对包气带岩性的变化也很敏感;在地下水埋深小于0.5m和大于1.5m的区间,气候、岩性、地下水埋深的变化对潜水蒸发量的影响变得微弱。另外,多年平均潜水蒸发量和地下水埋深的这种非线性关系可以用一个新提出的经验公式进行较为准确的拟合,将这个研究结果用于评价巴丹吉林沙漠湖泊集中区地下水的蒸发消耗,发现潜水蒸发总量显著大于湖面蒸发总量,前者约为后者的2.5~2.6倍,必须在沙漠水分平衡的分析中加以考虑。 相似文献
5.
地下水蒸发是旱区地下水均衡计算中重要的排泄项之一。由于包气带水分运移高度非线性且大气—地表界面动力学过程复杂,估算潜水蒸发量一直是地下水资源评价的难题之一。利用内蒙古乌审旗河南乡均衡试验场E601型蒸渗仪,建立了毛乌素沙地水面蒸发及4种典型岩性（风化砂岩K1、萨拉乌苏组砂Qpal+l、砂质壤土Qhl、风积沙Qheol）的饱和土蒸发原位试验,结合长期观测获取的大量数据,开展了地下水蒸发与水面蒸发、埋深的关系和地下水蒸发量计算方法研究。结果表明:（1）4种典型岩性（风化砂岩、萨拉乌苏组砂、砂质壤土、风积沙）饱和蒸发量与水面蒸发量比值分别为0.60,0.77,0.47,0.88,表明不同岩性的饱和裸土的蒸发强度不等于自由水面的蒸发强度;实际计算裸土蒸发强度时,不能以自由水面蒸发强度作为参考点,如果运用,必须校正。（2）利用蒸渗仪观测数据和土壤水运动方程稳态解析解,获得4种典型岩性（风化砂岩、萨拉乌苏组砂、砂质壤土、风积沙）潜水稳定蒸发计算的关键经验系数c,分别为628932.63,165058.71,48948.21,1525104.031 m?2。（3）利用稳定蒸发公式确定鄂尔多斯盆地风沙滩区四种典型包气带岩性（风化砂岩、萨拉乌苏组砂、砂质壤土、风积沙）潜水极限蒸发深度约为60 cm,结果得到了室内非稳态蒸发试验的佐证,为研究区水资源评价提供了重要的参数依据。 相似文献
6.
7.
8.
数值模拟法是地下水水量和水质评价的主要技术方法,通过简述地下水数值模拟的发展历程、FEFLOW软件的输入特点和功能,并结合FEFLOW在地下水模拟方面的应用现状,论述了对河流和断层处理的方法,最后提出了FEFLOW软件存在的问题及应用前景。研究结果可知:(1) FEFLOW是迄今为止功能最为齐全的地下水数值模拟软件,适用于各种尺度的地下水、多孔介质和热能传输项目,但这些领域基本都是水流和溶质运移耦合、水流和热量运移耦合等两场进行耦合,少见三场耦合研究实例;(2)存在无法实现源汇项单独处理等缺陷,仅能实现in/outflow on top/bottom菜单功能,降雨入渗和蒸发同时作用必须用净补给量来表达,增加了前处理的困难,在应用模型模拟时,由于FEFLOW网格划分时的数量受到限制,超大区域建模也容易出现不精确问题;(3)在对地下水污染物运移模型模拟时,通常考虑的是对流、弥散、吸附作用,而未有一阶化学非平衡反应,随着人类对地下水环境和质量的高度重视,对于两相有机和无机污染物迁移耦合研究将会是未来的研究重点。 相似文献
9.
Samuel Boateng 《Hydrogeology Journal》2001,9(6):543-554
A variably saturated flow model is coupled to a first-order reliability algorithm to simulate unsaturated flow in two soils.
The unsaturated soil properties are considered as uncertain variables with means, standard deviations, and marginal probability
distributions. Thus, each simulation constitutes an unsaturated probability flow event. Sensitivities of the uncertain variables
are estimated for each event. The unsaturated hydraulic properties of a fine-textured soil and a coarse-textured soil are
used. The properties are based on the van Genuchten model. The flow domain has a recharge surface, a seepage boundary along
the bottom, and a no-flow boundary along the sides. The uncertain variables are saturated water content, residual water content,
van Genuchten model parameters alpha (α) and n, and saturated hydraulic conductivity. The objective is to evaluate the significance of each uncertain variable to
the probabilistic flow. Under wet conditions, saturated water content and residual water content are the most significant
uncertain variables in the sand. For dry conditions in the sand, however, the van Genuchten model parameters α and n are the most significant. Model parameter n and saturated hydraulic conductivity are the most significant for the wet
clay loam. Saturated water content is most significant for the dry clay loam.
Electronic Publication 相似文献
10.
Development of a coupled surface-groundwater-pipe network model for the sustainable management of karstic groundwater 总被引：1，自引：0，他引：1
This paper considers the hydrogeological simulation of groundwater movement in karstic regions using a hydrological modelling system (SHETRAN) which has been adapted for modelling flow in karstic aquifers. Flow and transport through karstic aquifers remains poorly understood, yet quantitative hydrogeological models are essential for developing and implementing groundwater protection policies. The new model has been developed and used within the STALAGMITE (Sustainable Management of Groundwater in Karstic Environments) project, funded by the European Commission. The SHETRAN model is physically based insofar as most of the parameters have some physical meaning. The SHETRAN model represents all of the key processes in the hydrological cycle, including subsurface flow in the saturated and unsaturated zones, surface flow over the ground surface and in channels, rainfall interception by vegetation canopies, evapotranspiration, snow-pack development and snowmelt. The modifications made to SHETRAN to simulate karstic aquifers are (1) the coupling of a pipe network model to a variably saturated, three-dimensional groundwater component (the VSS-NET component), to simulate flow under pressure in saturated conduits; (2) the coupling of surface water features (e.g. sinking streams or "ponors", and spring discharges) to the conduit system; (3) the addition of a preferential "bypass" flow mechanism to represent vertical infiltration through a high-conductivity epikarst zone. Lastly, a forward particle tracking routine has been developed to trace the path of hypothetical particles with matrix and pipe flow to springs or other discharge points. This component allows the definition of groundwater protection zones around a source for areas of the catchment (watershed) which are vulnerable to pollution from non-point sources (agriculture and forestry). 相似文献
11.
高放废物处置库甘肃北山野马泉预选区地下水化学特征及水-岩作用模拟 总被引：6，自引：0，他引：6
在高放废物处置库场地选择和性能评价中,地下水化学特征是最重要的因素之一。文中以野外水文地球化学调查资料为基础,应用水文地球综合分析方法和地下水地球化学模拟技术,探讨中国高放废物处置库甘肃北山野马泉预选区地下水化学特征、时空分布规律及水岩作用机理。主要结论是:野马泉地区地下水以咸水为主, 具有高矿化的特征,水化学类型以Cl·SO4 Na和SO4·Cl Na型为主,pH值大多在7~8 之间;地下水化学成分显示出明显的分带特征;地下水对石盐和石膏欠饱和,对黄铁矿以及铝硅酸盐过饱和;方解石、钠长石在补给区地下水中呈不饱和状态,在排泄区地下水中呈饱和状态。由水岩作用模拟可知,沿水流路径地下水溶解岩石中的钠长石、黑云母、石盐等矿物,溶解二氧化碳,沉淀析出方解石、伊利石和萤石等矿物;发生明显地下水蒸发作用、二氧化碳溶解作用和Ca2+/ Na+离子交换作用, 说明溶滤、沉淀、离子交换和蒸发浓缩作用是区内地下水化学行为的控制因素。 相似文献
12.
13.
14.
Xiaoru Su Longcang Shu Xunhong Chen Chengpeng Lu Zhonghui Wen 《Hydrogeology Journal》2016,24(8):2035-2047
Interactions between surface waters and groundwater are of great significance for evaluating water resources and protecting ecosystem health. Heat as a tracer method is widely used in determination of the interactive exchange with high precision, low cost and great convenience. The flow in a river-bank cross-section occurs in vertical and lateral directions. In order to depict the flow path and its spatial distribution in bank areas, a genetic algorithm (GA) two-dimensional (2-D) heat-transport nested-loop method for variably saturated sediments, GA-VS2DH, was developed based on Microsoft Visual Basic 6.0. VS2DH was applied to model a 2-D bank-water flow field and GA was used to calibrate the model automatically by minimizing the difference between observed and simulated temperatures in bank areas. A hypothetical model was developed to assess the reliability of GA-VS2DH in inverse modeling in a river-bank system. Some benchmark tests were conducted to recognize the capability of GA-VS2DH. The results indicated that the simulated seepage velocity and parameters associated with GA-VS2DH were acceptable and reliable. Then GA-VS2DH was applied to two field sites in China with different sedimentary materials, to verify the reliability of the method. GA-VS2DH could be applied in interpreting the cross-sectional 2-D water flow field. The estimates of horizontal hydraulic conductivity at the Dawen River and Qinhuai River sites are 1.317 and 0.015 m/day, which correspond to sand and clay sediment in the two sites, respectively. 相似文献
15.
Polychlorinated biphenyls (PCBs) are the main constituents of clophen (the liquid of the electric transformers and capacitors)
and have been characterized as potential human carcinogens. PCBs can be a hazardous contaminant of soil and groundwater. We
used the mathematical model variably saturated 2D flow and transport (VS2DT model) to simulate the transport of PCBs from
the soil surface to groundwater for a time period of 30 years. We also used a mathematical model to simulate the colloid-facilitated
PCB transport, under saturated flow conditions. The results showed that PCBs dissolved in water cannot be transported to large
depths in unsaturated soils, because of their strong sorption onto soil and low solubility in water. For soils with very low
or no organic matter content, PCB transport is much faster and the probability of groundwater contamination is much higher.
PCBs can partition to colloids originating from dissolved organic matter in groundwater. Colloid-facilitated PCB transport
is faster compared to PCB transport in aqueous solution with no colloids present. 相似文献
16.
A shallow alluvial coastal aquifer in the Batinah area of Oman, with sea-water intrusion that extends several kilometres inland, has been studied experimentally, analytically and numerically. The water table is proved to have a trough caused by intensive pumping from a fresh groundwater zone and evaporation from the saline phreatic surface. Resistivity traverses perpendicular to the shoreline indicated no fresh groundwater recharge into the sea. Using an analytical Dupuit-Forchheimer model, developed for the plain part of the catchment, explicit expressions for the water table, sharp interface location and stored volume of fresh water are obtained. It is shown that by the pumping of salt water from the intruded part of the aquifer, this intrusion can be mitigated. Different catchment sizes, intensities of fresh groundwater pumping, evaporation rates, water densities, sea level, incident fresh water level in the mountains and hydraulic conductivity are considered. SUTRA code is applied to a hypothetical case of a leaky aquifer with line sinks modeling fresh water withdrawal and evaporation. The numerical code also shows that pumping of saline water can pull the dispersion zone back to the shoreline. 相似文献
17.
地下水封油库围岩地下水渗流量计算 总被引：6，自引：0，他引：6
为准确地计算特大型地下水封储油岩洞库地下水的渗流量,根据现场调查、测试与监测以及室内外物理力学试验,采用了三维多孔连续介质流-固耦合有限差分数值模拟计算分析软件模拟地下水渗流场。提出了一种适用于特大型地下水封储油岩洞库地下水渗流量计算的合理方法。经与法国专家经验法、大岛洋志经验式、《铁路工程水文地质勘测规范》（TB10049－96）等方法的计算结果进行比较,结果比较接近。该计算方法适用于试验数据和资料匮乏的可行性研究阶段的特大型地下水封储油岩洞库围岩地下水渗流量或涌水量的计算;考虑地下水流-固耦合分析时,单洞室的涌水量比只考虑地下水流动作分析时稍小;考虑流-固耦合作用比不考虑流-固耦合作用时围岩地下水的最大渗流速度稍小。 相似文献
18.
详细分析不同评价指标下的van Genuchten方程参数敏感性,对于深入认识参数物理意义、合理确定参数值、提高降水入渗数值模拟准确性具有重要意义.用HYDRUS软件建立一维变饱和水分运移模型,以实际补给量、补给过程曲线和极限蒸发深度作为评价指标,采用单因素扰动分析法对van Genuchten方程各参数敏感性进行理论分析,进而选取多组参数实例,分析同一岩性类别下,不同土样土壤水力参数差异及其对入渗补给模拟结果的影响.结果表明:形状系数 (n)、土壤进气值的倒数 (α) 与极限蒸发深度呈负相关关系,是影响极限蒸发深度的显著因素;饱和含水率 (θs)、n、饱和渗透系数 (Ks) 对于入渗补给影响的敏感性较高,三者在实际土样粒径分布、干密度和孔隙性的共同影响下发生同向变动.合理的参数敏感性分析及数值模拟调参过程需结合土壤参数的物理意义来开展. 相似文献
19.
Karst systems show high spatial variability of hydraulic parameters over small distances and this makes their modeling a difficult task with several uncertainties. Interconnections of fractures have a major role on the transport of groundwater, but many of the stochastic methods in use do not have the capability to reproduce these complex structures. A methodology is presented for the quantification of tortuosity using the single normal equation simulation (SNESIM) algorithm and a groundwater flow model. A training image was produced based on the statistical parameters of fractures and then used in the simulation process. The SNESIM algorithm was used to generate 75 realizations of the four classes of fractures in a karst aquifer in Iran. The results from six dye tracing tests were used to assign hydraulic conductivity values to each class of fractures. In the next step, the MODFLOW-CFP and MODPATH codes were consecutively implemented to compute the groundwater flow paths. The 9,000 flow paths obtained from the MODPATH code were further analyzed to calculate the tortuosity factor. Finally, the hydraulic conductivity values calculated from the dye tracing experiments were refined using the actual flow paths of groundwater. The key outcomes of this research are: (1) a methodology for the quantification of tortuosity; (2) hydraulic conductivities, that are incorrectly estimated (biased low) with empirical equations that assume Darcian (laminar) flow with parallel rather than tortuous streamlines; and (3) an understanding of the scale-dependence and non-normal distributions of tortuosity. 相似文献
20.
Mitja Janža 《Environmental Earth Sciences》2010,61(5):909-920
Karst aquifers are known for their heterogeneity and irregular complex flow patterns which make them more difficult to model
and demand specific modeling approaches. This paper presents one such approach which is based on a conceptual model. The model
was applied in a karst area of the catchment of Rižana spring (200 km2). It is based on the MIKE SHE code and incorporates
the main hydrological processes and geological features of the karst aquifer (diffuse and concentrated infiltration, allogenic
recharge, quick and slow groundwater flow, shifting groundwater divides and groundwater outflow from the catchment area).
Modeling of evapotranspiration and flow in the upper part of the unsaturated zone is more detailed. For the modeling of groundwater
flow in the karst aquifer, a conceptual model was applied which uses drainage function for the simulation of groundwater flow
through large conduits (karst channels and large fissures). The model was calibrated and validated against the observed Rižana
spring discharge which represents a measured response of the aquifer. The results of validation show that the model is able
to adequately simulate temporal evolution of the spring discharge, measured by Nash–Sutcliffe coefficient (0.82) as well as
overall water balance. 相似文献