共查询到20条相似文献，搜索用时 15 毫秒
1.
M. Hamami 《Geotechnical and Geological Engineering》2006,24(5):1271-1292
The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt.
It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial
multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed
pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the
test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been
put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation
energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the
rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters
assumed constant in the basic law. 相似文献
2.
盐岩油气储库介质地质力学模型相似材料的研制 总被引：8，自引：3，他引：5
以江苏金坛盐岩地下油气储库为示范工程,以精铁粉、重晶石粉、石英砂、一级松香和医用酒精为原料,根据相似原理以及金坛盐岩油气储库地层中盐岩、泥岩和盐岩夹层的实测物理力学参数,开展了各种配比条件下材料的单轴压缩、三轴压缩、直剪和巴西劈裂试验,通过原岩和模型材料的重度、泊松比、弹性模量、抗压强度、抗拉强度、黏聚力、内摩擦角等基本物理力学参数以及相应变形特征和强度破坏特性的对比分析,研制出基本满足相似条件要求的盐岩油气储库介质（盐岩、泥岩和盐岩夹层）的地质力学模型相似材料,为开展盐岩地下油气储库运营的变形与失效破坏地质力学模型试验提供了可靠的材料保证。 相似文献
3.
M. Haupt 《Rock Mechanics and Rock Engineering》1991,24(4):179-206
Summary The paper deals with uniaxial relaxation tests on rock salt which are the basis for a constitutive equation. Since so far no regard was paid to relaxation behaviour, corresponding test results are not available and hence a special device for performing of uniaxial relaxation tests had to be constructed. Some interesting test results are discussed in the paper. These results are useful for the verification of constitutive equations. A critical analysis of conventional constitutive laws and their fundamentals shows that these material laws have considerable imperfections and are rested on substantial restrictions. Particularly, they are not able to describe relaxation behaviour sufficiently. Consequently, a constitutive law is proposed consisting of a strain hardening approach with separate creep and relaxation functions. By post-calculation of different laboratory tests it could be shown that in comparison to conventional steady-state creep equations this material law describes the viscous behaviour of rock salt more realistically. 相似文献
4.
Geomechanical characterisation of rock masses in Alpine regions: the Basque Arc (Basque-Cantabrian basin, Northern Spain) 总被引：1，自引：0，他引：1
Toms Morales Gorka Uribe-Etxebarria Jesús A. Uriarte Iigo Fernndez de Valderrama 《Engineering Geology》2004,71(3-4):343-362
The geomechanical characterisation of rock masses in Alpine regions is one of the main challenges currently facing rock mechanics. These rock masses, made up of very different materials and frequently tectonically disturbed, are affected by engineering works, giving rise to potentially important problems. Thus, in the Basque Country, these materials are at the cause of important fatalities occurring in recent years. In this context, we aim at characterising these materials with the ultimate purpose of predicting their behaviour. The characterisation is initially approached based on the GSI, mi and σci parameters, following the Hoek-Brown failure criterion. This information is supplemented with field and laboratory measurements, and by obtaining the RQD and RMR indices. Using the information obtained from 99 metering stations, we develop a graphic classification procedure, which allows us to distinguish materials based on their characteristics, behaviour, type and degree of associated problems, and type and effectiveness of solutions provided. Eight classes of material are established. 相似文献
5.
A numerical procedure has been developed for predicting dilation (porosity) and gas permeability changes in rock salt. The hierarchical single-surface constitutive model of Desai and co-workers is used a finite element program to calculate the state of stress and strain surrounding excavations in rock salt. The elastoplastic constitutive model accounts for strain hardening, a non-associative volumetric response and stress-path-dependent behaviour. The calculated stress and strain fields are used in a flow model based on the equivalent channel concept to predict permeability. Parameters for both the mechanical and permeability models are developed from laboratory test results. Two field experiments adjacent to underground excavations are modelled. The extent of the dilated rock zone around the excavation is predicted well, but the magnitude of the porosity and gas permeability is underpredicted very near the excavations. This discrepancy is attributed to model parameters derived from loading-only laboratory tests, whereas significant unloading occurs in the field. The shape of the yield surface was found to be an important factor in dilation and permeability predictions. Similar stress, strain and permeability fields were obtained with different model types (plane strain or axisymmetric) and initial stress states, and with instantaneous and progressive excavation. 相似文献
6.
We present a micromechanical approach based on zero-thickness interface elements for modelling advanced localization and cracking states of cemented granular materials, such as reservoir sandstones. The proposed methodology is capable of reproducing the complex behaviour of intergranular and intragranular localization, cracking, and fracturing of rock formation that leads to sanding in hydrocarbon production. The model is calibrated at the macroscale, using only a few physical parameters, by reproducing the typical behaviour of compression element tests. The model exhibits clear transition behaviour from brittle dilatant to ductile compactant behaviour with increasing confining stress. The methodology is implemented for sand production prediction analysis based on the simulation of 2D micromechanical models of hollow cylinder cross sections. The obtained results are compared well with published experimental data from hollow cylinder tests characterized by strong scale effect in the range of small perforations. 相似文献
7.
对5种不同覆盖物（红土、砂、废石、砂与红土混合物、废石与红土混合物）降低铀尾矿氡析出的效果进行了现场实验研究。结果表明,不同覆盖物的效果存在较大差异,在相同覆盖厚度条件下,氡析出率降低系数是红土〉红土与废石混合物〉红土与砂混合物〉废石〉砂。表面氡析出率随覆盖物厚度增大而减小,氡析出率降低系数的对数与覆盖厚度成正比,所得到的各种覆盖物的拟合线性方程可用来评价覆盖效果。建立了各种覆盖物覆盖厚度估算的经验公式。综合考虑降氡效果、经济成本、生态环境效应,废石与红土混合物是该地区铀尾矿库最佳覆盖物。 相似文献
8.
A MX-80 sodium bentonite crushed granite rock mixture is being saturated in the Äspö Hard Rock Laboratory managed by SKB (the Swedish Company of nuclear waste management) as part of the “Backfill and Plug Test Project”. The Äspö Hard Rock Laboratory is placed in the Swedish Island of Äspö, an underground full-scale laboratory where different testing construction procedures and handling techniques are being studied. The groundwater of Äspö has a variable salt concentration according to the zone considered. The added water during the mixing process of both materials had an average salt concentration of 6 g/L. However, backfill is being saturated with salt water containing higher salt content (up to 16 g/L, 50 / 50 of NaCl and CaCl2 by mass) to speed up the saturation process. The mixture swelling capacity is small due to the low backfill bentonite content, but its activity is still large if compared with natural clayey soils. A coupled hydro-chemical approach was used to simulate the backfill hydration process, comparing the results with in situ measurements. An intrinsic permeability law, depending on salt concentration in the liquid phase, was incorporated into the model. The retention curve was also determined taking into account the effect of the chemical species on backfill behaviour. The simulation of the saturation process shows the importance of studying these problems with a HC (hydro-chemical) formulation, especially if long term behaviour of such mixtures is going to be reproduced. 相似文献
9.
物理相似模型试验是复杂、难采矿技术研究的有效手段,而岩石相似材料物理力学特性的研究是试验有效进行的前提。根据相似原理和岩石的力学特性,论证了岩石相似材料单轴抗压强度的力学代表性。统计并分析了影响岩石相似材料单轴抗压强度的一系列因素,基于量纲分析的方法构建了岩石相似材料单轴抗压强度与砂粒径、配比材料总量、充填材料（砂）用量、水用量、养护方式等重要因素间的无量纲计算模型,结合岩石相似材料配比试验得到了定量关系式。选取3组具有代表性的岩石相似材料配比试验对所建立的单轴抗压强度计算关系式进行验证,其计算结果与实验室实测结果相吻合,平均误差为4.20%,定量关系式在岩石相似材料参数的研究上具有一定的合理性。研究结果可以为相似材料物理力学参数的预测及岩土工程物理模型试验相似材料的高效选取提供参考。 相似文献
10.
D. G. Toll 《Geotechnical and Geological Engineering》1991,9(3-4):197-217
Summary Naturally-occurring road construction materials generally contain a greater amount of fines, and the fines have a higher plasticity than traditional materials such as a crushed rock aggregates. This makes their behaviour more difficult to understand and predict since soil suction and fabric become important controlling factors. The concepts of suction and fabric are outlined, and their role in controlling the behaviour of road construction materials is illustrated by a fundamental laboratory study of a lateritic gravel and two calcrete gravels. These materials have successfully been used as road base construction materials in low-volume bituminous-surfaced roads in Kenya and Botswana. It is concluded that the presence of fines can be an advantage, since they allow significant suctions to develop and also reduce the permeability. 相似文献
11.
采用电阻率成像法探讨了室内实验尺度上岩体中盐溶液的入渗过程。在岩柱试样上进行蒸馏水和盐溶液的入渗实验，在入渗过程中通过多通道高密度电阻率勘测系统对岩柱的电性特征在三维空间上进行动态监测。然后对入渗过程岩柱进行电阻率成像，从而获得不同时刻岩柱中的电阻率分布。各勘测截面上电阻率的分布和变化基本反映了岩柱内盐溶液的时空变化特征，表明电阻率成像法动态监测室内实验尺度岩石中盐溶液的入渗是可行的，岩柱5个截面的电阻率图像表明溶液的入渗是不均匀的。 相似文献
12.
The mechanical strength of rock in terms of shear or compressive failure has been previously adopted as a criterion for sand production and when used solely has been proven to overestimate the process. On the other hand, ignoring the mechanical strength behaviour of the material increases the tendency for inaccurate estimations of the erosion process. In this work, an equally proportionated inclusion of the mechanical strength and erosion-based criteria in sanding predictions is proposed and assessed by numerical models. Several rock failure models and their influences on the sanding process have been analysed, including models such as the Drucker–Prager (DP), the Drucker–Prager hardening (DP hardening), the Mohr–Coulomb (MC) and the Mohr–Coulomb softening (MC softening). Modelling outcomes show distinct differences in rock response to operating and boundary conditions (e.g. flow rate and drawdown), and predictions of sand production. It was confirmed by modelling results that despite the low magnitude of stresses and strains developed at the well face and perforation regions, post-yield hardening behaviour increases the estimation of the amount and intensity of sand production. Also, incorporating a post-yield softening behaviour increases the magnitude of stresses and strains; however, this effect is observed to have a negligible impact on sand production. The role of void ratio has been recognised as a dominant factor, as its evolution significantly determines the pattern and intensity of sand production. A more cautious selection and rigorous coupling of rock strength models in sand production modelling is therefore essential if accuracy of predictions is to be improved. 相似文献
13.
当前盐岩的宏观力学模型通常是唯象模型,不能很好地解释盐岩受力变形破坏的真正物理基础。盐岩是由于化学沉积而形成的矿物集合体,是一种主要由NaCl和少量杂质组成的多晶体,其变形机制主要由晶粒与晶界的力学特性控制。通过扫描电镜（SEM）,获得盐岩晶粒的微细观结构特征,采用分子动力学方法和纳米压痕技术,确定盐岩晶粒和晶界的微细观力学参数;将盐岩晶粒作为块体,基于Voronoi多边形技术,建立盐岩的微细观数值模型;利用离散元方法,对盐岩试件在单轴压缩和直剪条件下的宏观力学行为进行了数值模拟。数值模拟结果与宏观力学试验结果吻合度高,表明基于盐岩微细观晶粒结构特征并结合离散元数值模拟的方法能够较好地研究盐岩的宏观力学性能及其材料物理基础。 相似文献
14.
An historical review of the geotechnical behaviour of the Northwich Rock Salt is presented as a forerunner to a numerical modelling analysis of the current stability of the Winsford salt mine, Cheshire. Extensive laboratory and in situ tests have been historically undertaken by the mine to characterise the strength and stiffness behaviour of the rock salt. Recent proposals to store waste within the Bostock No. 5 panel of the mine have lead to increasing concerns as to the current stability of the workings, as well as to the long term stability of the mine. This present study uses the wealth of geotechnical data to assess the current mine stability using numerical modelling techniques and validates the results against in situ roof to floor convergence data. The results indicate that the mine structures are stable. Convergence simulation using the numerical model compare favourably with the in situ monitoring data allowing greater con.dence to be placed in future predictions. 相似文献
15.
湖北江陵凹陷深层高温富钾卤水特征及其成因探讨 总被引：4，自引：0，他引：4
江汉盆地江陵凹陷深处赋存高温富钾卤水,含卤地层主要是古新统沙市组。富钾卤水的分布受持续的继承性沉降中心(洼陷)、沙市组含盐系、石盐-硫酸盐沉积相的控制,聚集在砂岩、玄武岩、辉绿岩和白云岩等孔隙-裂隙内,裂隙的发育又与局部构造(背斜、盐构造等)枢纽部共轭裂隙带有关。古新世,盐湖已经蒸发浓缩到钙芒硝-石盐阶段,可能短暂达到硫酸镁盐和硫酸钾镁盐阶段。以后,原生的晶间卤水在成岩后期受到玄武岩侵入和高温流体影响,发生变质作用、去镁和去硫酸根作用,同时带入丰富的钾、铷、铯等元素,最后形成了高温富钾卤水。这种成矿过程可称为地下热事件激发成矿机制,值得进一步探讨。 相似文献
16.
流-固耦合模型试验用的新型相似材料研制及应用 总被引：1，自引：0，他引：1
为研究隧道突水、突泥过程中断层及围岩各物理场变化规律,根据地质力学模型试验相似原理,通过大量多组别配比试验,研制出适用于流-固耦合模型试验的新型断层及围岩相似材料。其中,断层相似材料以砂为粗骨料,滑石粉为细骨料,石膏、膨润土作为胶结剂,液态石蜡作为调节剂;围岩相似材料以砂为粗骨料,重晶石粉、滑石粉为细骨料,白水泥及乳胶作为胶结剂。通过大量室内试验,对比分析原岩及相似材料变形特征及强度破坏特性,重点对单轴抗压强度、渗透系数、重度、泊松比、弹性模量等重要变形及水理特性参量进行调控,系统研究不同配比对材料参数的影响规律。试验结果表明：该材料力学参数变化范围广、性能稳定、操作工艺简单,可用来模拟不同渗透系数的低、中等强度岩体材料。将该相似材料应用于吉莲高速公路永莲隧道断层突水、突泥三维地质力学模型试验中,力学性能及水理特性均达到试验要求,能够有效地模拟突水、突泥的发展演变过程,真实反映断层灾变过程中各物理场响应规律。 相似文献
17.
In this paper results of triaxial and true triaxial testing conducted on physical models of a rock mass are used to describe its post failure behaviour. The specimens comprised of three continuous joint sets and were prepared from blocks of sand lime model material. The testing was performed using a True Triaxial System (TTS) developed by the authors. The results show strain hardening, strain softening and plastic behaviour in the simulated rock mass specimens depending upon joint geometry and stress state. Expressions are suggested to estimate post peak modulus in triaxial and true triaxial stress conditions. Finally, a zonation table is proposed to assess the strain hardening, softening and plasticity behaviour of a rock mass material with the help of joint geometry and confining stress conditions at site. 相似文献
18.
一种盐岩相似材料的试验研究 总被引：4，自引：0，他引：4
目前国内外学者主要利用小尺寸盐岩试件进行盐岩造腔理论以及溶腔稳定性方面的研究,所以利用相似材料制备大尺寸型盐模拟盐岩造腔全过程,以及研究溶腔的稳定性是有必要的。利用盐屑在高压下制备成型盐,测试其溶解特性和力学特性。试验表明压制应力为40、60、80 MPa时制成的型盐,其溶解速率变化不大;在压制型盐与天然岩盐的倾角溶解试验中发现,倾角为0°、90°、180°时溶解速率分别是天然盐岩的2.15倍、1.84倍、1.77倍;型盐的单轴抗压强度同压制的应力成正比,压制应力为80 MPa时干燥型盐同天然盐岩强度相当;型盐吸水后强度有所降低,而天然盐岩吸水后强度没有明显变化。所以在适当压制力作用下,利用盐屑压制型盐代替盐岩用于造腔理论及造腔全过程试验和溶腔稳定性试验研究是可行的。 相似文献
19.
Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003
Published online April 29, 2003 相似文献
20.
可溶盐富集是造成山西大同云冈石窟砂岩表面风化、结构破坏及强度降低的重要地质病害之一。采取云冈石窟造像层砂岩,使用芒硝对该砂岩进行了劣化模拟试验。在可溶盐反复结晶过程中,对样品进行实时变形监测,并对循环过程中质量衰减、强度变化、孔隙分布等进行测试与分析。结果表明,可溶盐的发育是导致石窟表面粉化脱落的重要因素,严重降低了石窟文物本体的价值;可溶盐结晶导致岩石颗粒间胶结作用破坏,增大岩石孔隙率,岩石内部结构劣化严重影响岩石的刚度与强度等力学参数;对比无水芒硝与10水芒硝两种劣化试验,云冈石窟在相对干燥季节下,可溶盐晶体发育对岩石破坏更为显著。为了预测砂岩长期劣化过程,在试验数据基础上,初步建立起孔隙增长的对数模型和强度衰减的指数模型。 相似文献