首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 246 毫秒
1.
The adsorption of cadmium (Cd) and zinc (Zn) with similar chemical properties is examined onto three soil samples: one is alkaline and the others are acidic. The distribution coefficient (K d) and the Freundlich constant (K F) for Zn are slightly higher than those for Cd, implying that the adsorption affinity of Zn is a little greater and less mobile. However, Cd and Zn usually show comparable results in the kinetic, isotherm, and envelope experiments. The adsorption of the heavy metals is relatively rapid and the reaction is almost completed within 15 min. The kinetics for both Cd and Zn are very well explained by the parabolic diffusion model. The maximum adsorption of the heavy metals is obtained at high pH, high temperature, and low ionic strength. The adsorption capacity on the alkaline soil is more significantly affected by the temperature as compared to the acidic soil. It is found that the adsorption affinity of the two heavy metals is mainly affected by the soil properties, such as pH, pHPZC, organic matter, and total carbon. It is also confirmed that the chemical properties of the heavy metals are important factors in their adsorption onto soil. The adsorption isotherms of Cd and Zn are well described in both Freundlich and Langmuir models at the usual pH (soil pH). Under acidic and alkaline pHs, however, only the Freundlich model describes the adsorption of both heavy metals satisfactorily.  相似文献   

2.
Rapid increases in the amounts of fullerene C60 nanoparticles (nC60) being produced and used will inevitably lead to increases in the amounts released into the aquatic environment. This will have implications for human and ecosystem health. Wastewater treatment plants are key barriers to nC60 being released into aquatic systems, but little information is available on how adsorption processes in wastewater treatment plants affect the fates of nC60. We investigated the effects of the surface properties of activated sludge on the adsorption of nC60 and related mechanisms by modeling the adsorption kinetics and equilibrium process and performing correlation analyses. The adsorption of nC60 closely followed the pseudo-second-order kinetic model (R > 0.983), the Freundlich isotherm model (R > 0.990), and the linear partitioning isotherm model (R > 0.966). Different adsorption coefficients, 1.070–4.623 for the Freundlich partitioning model and 1.788–6.148 for the linear partitioning model, were found for different types of activated sludge. The adsorption coefficients significantly positively correlated with the zeta (ζ) potential (R = 0.877) and hydrophobicity (R = 0.661) and negatively correlated with particle size (R = ?0.750). The results show that nC60 adsorption is strongly affected by the surface properties of activated sludge because changes in surface properties cause changes in the electrostatic and hydrophobic interactions that occur.  相似文献   

3.
Sorption of three surfactants and personal care products in four types of commonly occurring Indian soils was extensively studied. The soils used in the study were red soil, clay soil, compost soil and sandy soil as classified by American Society for Testing and Materials (ASTM). The three surfactants used in the study were representative of cationic, non-ionic and anionic surfactant groups. The sorption of surfactants followed the descending order: sodium dodecyl sulphate (SDS) > trimethyl amine (TMA) > propylene glycol (PG). The maximum adsorption capacity (Qmax) was obtained in compost soil (28.6 mg/g for SDS; 9.4 mg/g for TMA and 4 mg/g for PG). The rate of adsorption was the maximum in compost soil followed by clay and red soils, and minimum for sandy soils. It is found that the Freundlich model fits the isotherm data better than the Langmuir model. Freundlich coefficient (K f) increased as the organic content of soils increased. Desorption of target pollutants in tap water was 20–50% whereas acid desorbs 40–90% of target pollutants from soil matrix. It was also found that the adsorption and desorption were significantly affected by the presence of clay and organic matter. The results also indicate that surfactants and personal care products, especially TMA and PG, are highly mobile in sandy soil followed by red soil. Therefore, immobilization of target pollutants is most economical and effective in compost and clayey soils whereas for other type of soils the combination of physiochemical and biological process will be effective option for remediation.  相似文献   

4.
Sorption isotherms, time-dependent adsorption and surface complexation modeling studies were used to investigate the post-depositional mobility of three of the platinum group-elements (Pd, Rh, and Pt) in semi-arid soil and sediment samples with varying surface properties. The acidity constants (Log Ka1 and Log Ka2), optimized from batch titration data, ranged from 4.69 to 5.34 for Log Ka1 and from −6.51 to −7.61 for Log Ka2, suggesting the occurrence of both protonation and deprotonation reactions on the solid surfaces. Partition coefficients and removal rates of the metals had a general trend of Pd > Pt > Rh. The sediment sample, with the highest clay content and exchangeable cation concentrations, also had the highest affinity for the metals. The times required for sediment to adsorb 63% of the metals were 2.63 h, 4.08 h and 10.64 h for Pd, Pt and Rh, respectively. The FITEQL program successfully optimized the conditional binding constants of the metals on the solids from batch adsorption data. The constants decreased in the order of Pd > Rh > Pt, which was consistent with the observed high affinity of the solids for Pd. The modeling results also showed that aqueous Pd was the least sensitive to pH followed by Rh and Pt. However, metal adsorption below the points of zero net proton charges (ca. pH 6.7) is attributable to the involvement of permanent negatively charged binding sites in the adsorption process. Notably, partition coefficients, removal rates and conditional binding constants all showed a high affinity of Pd for the solids. A similarity between the model outputs and the batch adsorption data indicates the suitability of the model for describing the mobility and retention of the three metals in semi-arid soils and sediments.  相似文献   

5.
Vanadium adsorption by soils representing different soil types from Germany has been studied. For 30 soils ‘Freundlich’ type sorption isotherms have been deduced from laboratory vanadium(V) adsorption experiments. The native adsorbed vanadium quantity of a soil (S0) and the Freundlich parameters m and log k have been determined by non linear regression of the experimental data to the Freundlich model. Pronounced differences in vanadium adsorption of different soils exist and could be quantified. The vanadium adsorption data could be generalized by grouping the soils into four classes according to their vanadium adsorption properties. For each class (sandy soils, top soils, sub soils with pH < 5.5, and sub soils with pH > 5.5) mean Freundlich parameters m and log k have been calculated to be 0.59, 0.72, 0.52, 0.57 and 2.55, 2.89, 4.29, 3.41, respectively. These parameters can be used to estimate vanadium sorption properties of soils for which no vanadium sorption experiments are available. Aqua regia soluble vanadium contents of the studied soils (range 1.7–143 mg/kg; median 32 mg/kg) and leached vanadium concentrations from experiments without vanadium addition (range 0.08–37 µg/l; median 2.1 µg/l) are also given.  相似文献   

6.
This study investigated the removal efficiency of pharmaceuticals from aqueous solutions supported on chemically treated fly ash. The coal fly ash was supplied by the electric power station in Krakow, Poland. There are plenty of studies showing the utilization of fly ash as a low-cost adsorbent for wastewater containing heavy metals or dyes. Adsorption and immobilization of pharmaceuticals and personal care products on fly ash is a relatively new method but it is a very promising one. In this study, the adsorptive removal of diclofenac, ketoprofen, carbamazepine, bezafibrate, bisphenol A, 17α-ethinyl estradiol and estriol by HCl- and NaOH-treated fly ash was assessed. Chemical treatment of fly ash changed structures of particles and enhanced specific surface areas. HCl-treated fly ash was characterized by the highest BET specific surface area 47.9 m2 g?1 and unburned carbon content 8.1%. Isotherms for all compounds except for 17α-ethinyl estradiol (EE2) and estriol (E3) were linear. Higher linear regression coefficients (R 2) obtained for isotherms of EE2 and E3 show that the Freundlich model better describes their sorption. Adsorption coefficients K d varied between 109.5 (L kg?1) for bisphenol A and 471.5 (L kg?1) for bezafibrate. Freundlich constants (K F) for EE2 and E3 were 62.3 and 119.9 (µg1?1/n L1/n kg?1), respectively. Acid treatment of fly ash increased adsorption of diclofenac, ketoprofen, carbamazepine, bezafibrate and bisphenol A. Comparison of the octanol–water partitioning coefficients (log K OW) with the partitioning coefficients normalized on unburned carbon content (log K UC) revealed similarities but no strong correlation. The increasing of unburned carbon increased sorption of compounds to fly ash.  相似文献   

7.
Information on the particle size and reactive surface area of natural samples and its interaction with natural organic matter (NOM) is essential for the understanding bioavailability, toxicity, and transport of elements in the natural environment. In part I of this series (Hiemstra et al., 2010), a method is presented that allows the determination of the effective reactive surface area (A, m2/g soil) of the oxide particles of natural samples which uses a native probe ion (phosphate) and a model oxide (goethite) as proxy. In soils, the natural oxide particles are generally embedded in a matrix of natural organic matter (NOM) and this will affect the ion binding properties of the oxide fraction. A remarkably high variation in the natural phosphate loading of the oxide surfaces (Γ, μmol/m2) is observed in our soils and the present paper shows that it is due to surface complexation of NOM, acting as a competitor via site competition and electrostatic interaction. The competitive interaction of NOM can be described with the charge distribution (CD) model by defining a ≡NOM surface species. The interfacial charge distribution of this ≡NOM surface species can be rationalized based on calculations done with an evolved surface complexation model, known as the ligand and charge distribution (LCD) model. An adequate choice is the presence of a charge of −1 v.u. at the 1-plane and −0.5 v.u. at the 2-plane of the electrical double layer used (Extended Stern layer model).The effective interfacial NOM adsorption can be quantified by comparing the experimental phosphate concentration, measured under standardized field conditions (e.g. 0.01 M CaCl2), with a prediction that uses the experimentally derived surface area (A) and the reversibly bound phosphate loading (Γ, μmol/m2) of the sample (part I) as input in the CD model. Ignoring the competitive action of adsorbed NOM leads to a severe under-prediction of the phosphate concentration by a factor ∼10 to 1000. The calculated effective loading of NOM is low at a high phosphate loading (Γ) and vice versa, showing the mutual competition of both constituents. Both constituents in combination usually dominate the surface loading of natural oxide fraction of samples and form the backbone in modeling the fate of other (minor) ions in the natural environment.Empirically, the effective NOM adsorption is found to correlate well to the organic carbon content (OC) of the samples. The effective NOM adsorption can also be linked to DOC. For this, a Non-Ideal Competitive adsorption (NICA) model is used. DOC is found to be a major explaining factor for the interfacial loading of NOM as well as phosphate. The empirical NOM-OC relation or the parameterized NICA model can be used as an alternative for estimating the effective NOM adsorption to be implemented in the CD model for calculation of the surface complexation of field samples. The biogeochemical impact of the NOM-PO4 interaction is discussed.  相似文献   

8.
Samples of authigenic material, sediment overlying water and oxic surface sediment (0–0.5-cm depth) from a perennially oxygenated lacustrine basin were analysed to investigate which solid phases are important for binding a suite of trace elements (Ag, As, Ca, Cd, Cu, Hg, In, methylmercury (MeHg), Mg, Mo, Pb, Sb and Zn). The authigenic material, which was collected with inert Teflon sheets deployed for several years across the sediment–water interface, contained mainly poorly crystallized Fe oxyhydroxides and natural organic matter, presumably humic substances derived from the watershed. Manganese oxyhydroxides were not present in the collected authigenic material due to the slightly acidic condition (pH = 5.6) of the lake that prevents the formation and recycling of these compounds. Conditional equilibrium constants for the adsorption of cationic (KFe–M) and anionic (KFe–A) trace elements onto the authigenic Fe oxyhydroxides were estimated from their concentrations in the authigenic material and in bottom water samples. These field-derived values of KFe–M and KFe–A were compared with those predicted by the surface complexation model, using laboratory-derived intrinsic adsorption constants and the water composition at the study site. Equilibrium constants (KPOM–M) were also calculated for the adsorption of the cationic trace elements onto the humic substances contained in the diagenetic material. The field-derived values of KPOM–M were compared to those predicted by the speciation code WHAM 6 for the complexation of the trace elements by dissolved humic substances in the lake. Combining the results of the present study with those on the distributions of trace elements in the porewater and solid-phase sediments reported in previous studies at the same site, it was determined whether the trace elements bind preferentially to Fe oxyhydroxides or natural organic matter in oxic sediments. The main inferences are that the anionic trace elements As, Mo and Sb, as well as the cationic metal Pb are preferentially bound to the authigenic Fe oxyhydroxides whereas the other trace elements, and especially Hg and MeHg, are preferentially bound to the humic substances.  相似文献   

9.
In this work, a low-cost lignocellulosic adsorbent with high biosorption capacity is proposed, suitable for the efficient removal of hexavalent chromium from water and wastewater media. The adsorbent was produced by autohydrolyzing Scots Pine (Pinus Sylvestris) sawdust. The effect of the autohydrolysis conditions, i.e., pretreatment time and temperature, on hexavalent chromium biosorption was investigated using energy-dispersive X-ray spectroscopy (EDS) and UV–visible spectrophotometry. The Freundlich, Langmuir, Sips, Radke-Prausnitz, Modified Radke-Prausnitz, Tóth, UNILAN, Temkin and Dubinin-Radushkevich adsorption capacities and the rate constant values for pseudo-first- and pseudo-second-order kinetics indicated that the autohydrolyzed material exhibits significantly enhanced hexavalent chromium adsorption properties comparing with the untreated sawdust. The Freundlich’s adsorption capacity K F increased from 2.276 to 8.928 (mg g?1)(L mg?1)1/n , and the amount of hexavalent chromium adsorbed at saturation (Langmuir constant q m) increased from 87.4 to 345.9 mg g?1, indicating that autohydrolysis treatment at 240 °C for 50 min optimizes the adsorption behavior of the lignocellulosic material.  相似文献   

10.
《Geochimica et cosmochimica acta》1999,63(19-20):3059-3067
In order to test the ability of a surface complexation approach to account for metal-bacteria interactions in near surface fluid-rock systems, we have conducted experiments that measure the extent of adsorption in mixed metal, mixed bacteria systems. This study tests the surface complexation approach by comparing estimated extents of adsorption based on surface complexation modeling to those we observed in the experimental systems. The batch adsorption experiments involved Ca, Cd, Cu, and Pb adsorption onto the surfaces of 2 g positive bacteria: Bacillus subtilis and Bacillus licheniformis. Three types of experiments were performed: 1. Single metal (Ca, Cu, Pb) adsorption onto a mixture of B. licheniformis and B. subtilis; 2. mixed metal (Cd, Cu, and Pb; Ca and Cd) adsorption onto either B. subtilis or B. licheniformis; and 3. mixed or single metal adsorption onto B. subtilis and B. licheniformis. %Independent of the experimental results, and based on the site specific stability constants for Ca, Cd, Cu, and Pb interactions with the carboxyl and phosphate sites on B. licheniformis and B. subtilis determined by Fein et al. (1997), by Daughney et al. (1998) and in this study, we estimate the extent of adsorption that is expected in the above experimental systems.Competitive cation adsorption experiments in both single and double bacteria systems exhibit little adsorption at pH values less than 4. With increasing pH above 4.0, the extent of Ca, Cu, Pb and Cd adsorption also increases due to the increased deprotonation of bacterial surface functional groups. In all cases studied, the estimated adsorption behavior is in excellent agreement with the observations, with only slight differences that were within the uncertainties of the estimation and experimental procedures. Therefore, the results indicate that the use of chemical equilibrium modeling of aqueous metal adsorption onto bacterial surfaces yields accurate predictions of the distribution of metals in complex multicomponent systems.  相似文献   

11.
This study investigated the effect of cations and anions on the sorption and desorption of iron (Fe) and manganese (Mn) in six surface calcareous soil samples from Western Iran. Six 10 mM electrolyte background solutions were used in the study, i.e., KCl, KNO3, KH2PO4, Ca(NO3)2, NaNO3, and NH4NO3. NH4NO3 and NaNO3 increased the soil retention of Fe and Mn, whereas Ca(NO3)2 decreased the soil retention of Fe and Mn. Iron and Mn sorption was decreased by NO3 ? compared with H2PO4 ? or Cl?. The Freundlich equation adequately described Fe and Mn adsorption, with all background electrolytes. The Freundlich distribution coefficient (K F) decreased in the order H2PO4 ? > Cl? > NO3 ? for Mn and H2PO4 ? > NO3 ? > Cl? for Fe. The highest sorption reversibility was for Fe and Mn in competition with a Ca2+ background, indicating the high mobility of these two cations. A MINTEQ speciation solubility model showed that Fe and Mn speciation was considerably affected by the electrolyte background used. Saturation indices indicated that all ion background solutions were saturated with respect to siderite and vivianite at low and high Fe concentrations. All ion background solutions were saturated with respect to MnCO3(am), MnHPO4, and rhodochrosite at low and high Mn concentrations. The hysteresis indices (HI) obtained for the different ion backgrounds were regressed on soil properties indicating that silt, clay, sand, and electrical conductivity (EC) were the most important soil properties influencing Fe adsorption, while cation exchange capacity (CEC), organic matter (OM), and Mn-DTPA affected Mn adsorption in these soils.  相似文献   

12.
  相似文献   

13.
Bacteria are very efficient sorbents of trace metals, and their abundance in a wide variety of natural aqueous systems means biosorption plays an important role in the biogeochemical cycling of many elements. We measured the adsorption of Cu(II) to Bacillus subtilis as a function of pH and surface loading. Adsorption edge and XAS experiments were performed at high bacteria-to-metal ratio, analogous to Cu uptake in natural geologic and aqueous environments. We report significant Cu adsorption to B. subtilis across the entire pH range studied (pH ∼2-7), with adsorption increasing with pH to a maximum at pH ∼6. We determine directly for the first time that Cu adsorbs to B. subtilis as a (CuO5Hn)n−8 monodentate, inner-sphere surface complex involving carboxyl surface functional groups. This Cu-carboxyl complex is able to account for the observed Cu adsorption across the entire pH range studied. Having determined the molecular adsorption mechanism of Cu to B. subtilis, we have developed a new thermodynamic surface complexation model for Cu adsorption that is informed by and consistent with EXAFS results. We model the surface electrostatics using the 1pK basic Stern approximation. We fit our adsorption data to the formation of a monodentate, inner-sphere RCOOCu+ surface complex. In agreement with previous studies, this work indicates that in order to accurately predict the fate and mobility of Cu in complex biogeochemical systems, we must incorporate the formation of Cu-bacteria surface complexes in reactive transport models. To this end, this work recommends log K RCOOCu+ = 7.13 for geologic and aqueous systems with generally high B. subtilis-to-metal ratio.  相似文献   

14.
To assess the competitive sorption and desorption of cadmium (Cd) and lead (Pb), batch equilibrium experiments were performed using single- and binary-metal solutions in surface samples of three paddy soils from eastern China. Sorption isotherms were well fitted with one-metal and competitive Langmuir equation for single- and binary-metal system, respectively. The distribution coefficient (K d) values were K d single (Pb) > K d binary (Pb) > K d single (Cd) > K d binary (Cd), indicating that Pb was stronger sorbed by these soils than Cd in binary metal system. Soils with high pH and clay content had the greatest sorption capacity as estimated by the maximum sorption parameter (Q). The co-existence of both metals reduces their tendency of sorption, whereas Cd sorption was affected to a greater extent than that of Pb. The Langmuir binding strength parameter (b) in binary sorption system was greater than that in single sorption system for all soils (b < b 1), indicating that competition for sorption sites promote the retention of both metals into more specific sorption sites. Sorption of Cd and Pb decreased soil pH by 1.61 U for YRS, 1.39 U for PCS, and 0.91 U for SLS. The decreases of pH in binary metal system were greater than in single-metal system for three soils. Cadmium and Pb desorption increased with increasing Cd and Pb sorption saturation for all soils; however, Cd desorption ratio in binary metal system (d Cd*) was much greater than Pb (d Pb*), indicating that under the competitive sorption conditions, the sorbed Cd was more readily desorbed from the soils than the sorbed Pb.  相似文献   

15.
In the present study, adsorption of lead (II) ions from aqueous solution by alluvial soil of Bhagirathi River was investigated under batch mode. The influence of solution pH, sorbent dose, initial lead (II) concentration, contact time, stirring rate and temperature on the removal process were investigated. The lead adsorption was favored with maximum adsorption at pH 6.0. Sorption equilibrium time was observed in 60 min. The equilibrium adsorption data were analyzed by the Freundlich, Langmuir, Dubinin–Radushkevich and Temkin adsorption isotherm models. The kinetics of lead (II) ion was discussed by pseudo first-order, pseudo second-order, intra-particle diffusion, and surface mass transfer models. It was shown that the adsorption of lead ions could be described by the pseudo second-order kinetic model. The activation energy of the adsorption process (E a) was found to be ?38.33 kJ mol?1 using the Arrhenius equation, indicating exothermic nature of lead adsorption onto alluvial soil. Thermodynamic parameters, such as Gibbs free energy (?G 0), the enthalpy (?H 0), and the entropy change of sorption (?S 0) have also been evaluated and it has been found that the adsorption process was spontaneous, feasible, and exothermic in nature. The results indicated that alluvial soil of Bhagirathi River can be used as an effective and low cost adsorbent to remove lead ions from aqueous solutions.  相似文献   

16.
Acacia nilotica was used for the adsorption of Reactive Black 5 (RB5) dye from an aqueous solution. Both the raw and activated (with H3PO4) carbon forms of Acacia nilotica (RAN and ANAC, respectively) were used for comparison. Various parameters (including dye concentration, contact time, temperature, and pH) were optimized to obtain the maximum adsorption capacity. RAN and ANAC were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The maximum experimental adsorption capacities for RAN and ANAC were 34.79 and 41.01 mg g?1, respectively, which agreed with the maximum adsorption capacities predicted by the Langmuir, Freundlich, and Dubinin–Radushkevich equilibrium isotherm models. The adsorption data of ANAC showed a good fit to the isotherm models based on the coefficient of determination (R 2): Langmuir type II (R 2 = 0.99) > Freundlich (R 2 = 0.9853) > Dubinin–Radushkevich (R 2 = 0.9659). This result suggested monolayer adsorption of RB5 dye. The adsorption of RB5 dye followed pseudo-second-order kinetics. The RAN adsorbent reflected an exothermic reaction (enthalpy change, ΔH = ?0.006 kJ mol?1) and increased randomness (standard entropy change, ΔS = 0.038 kJ mol?1) at the solid–solution interface. In contrast, ANAC reflected both exothermic [?0.011 kJ mol?1 (303–313 K)] and endothermic [0.003 kJ mol?1 (313–323 K)] reactions. However, the ΔS value of ANAC was lower when the RB5 adsorption increased from 313 to 323 K. The negative values for the Gibbs free energy change at all temperatures indicated that the adsorption of RB5 dye onto RAN and ANAC was spontaneous in the forward direction.  相似文献   

17.
  相似文献   

18.
Conditional surface binding constants and complexation capacities for Zn, Pb, Cd, and Cu were determined from surface titration experiments of heterogeneous natural aquatic particulate matter of different origin and composition. Metals and particles were evaluated in naturally occurring concentration ranges in river water.The adsorption of trace metals can be adequately described with a single conditional binding constant over a wide range of metal : particle ratios. Binding constants for aquatic particles at pH 8.0 are remarkably independent from particle composition and are specific for each metal: log Kads Zn = 8.39, log Kads Pb = 9.67, log Kads Cd = 8.61, log ads Cu = 9.84. From competition experiments with Ca and Pb we extracted a sorption coefficient for Ca of log Kads Ca = 2.5 (pH 8.0). Maximum surface binding capacities for all metal ions were found for particles containing high fractions of Mn-oxides which are associated with large specific surface areas. Generally, we found sorption capacities to decrease in the sequence Cu Pb, Zn > Cd.The experiments suggest that the conditional surface binding constants and complexation capacities are applicable to model trace metal adsorption in the concentration ranges of natural waters under conditions similar to the experiments. Results also imply that the chemical nature of particle surface sites is rather uniform in the intermediate concentration range or that the array of binding sites averages out differences in sorption strength over the prevailing concentration range of metal ions, respectively.  相似文献   

19.
铁氧化物矿物对苯酚和溶解性有机质表面吸附的初步研究   总被引：2，自引：0，他引：2  
文中以铁氧化物矿物对苯酚和溶解性有机质(DOM)的吸附研究为例开展生态矿物学研究。铁氧化物矿物的吸附作用存在多种机制,这些吸附机制发生作用的条件主要取决于溶液化学性质和吸附质的理化性质。批处理实验研究表明,苯酚吸附在酸性微酸性条件下不强,吸附等温线符合Langmuir方程,属于表面分子吸附模型;DOM的吸附强并发生吸附分异,配体交换、憎水键和范氏力等多种模式并存,在酸性中性条件下对DOM在针铁矿上的吸附起着重要贡献。本文实验条件下DOM吸附等温线近于线性,不能采用Langmuir方程拟合,可能原因是DOM浓度较低。矿物表面荷电性对吸附影响显著,例如,当矿物表面净电荷为零(pH=pHpzc)时,矿物表面水化膜减薄甚至消失,苯酚分子、憎水DOM分子或片断都会倾向于在矿物表面上吸附。由于苯酚吸附机制单一,其受到的影响很明显,所以苯酚在pH值7～8范围内出现吸附最大值;由于配体交换作用主要发生在酸性微酸性条件下,所以在本文pH值约7.5的实验条件下,尽管配体交换仍在发生作用,但它不是主要吸附机制,针铁矿对DOM吸附的主要贡献应是憎水键和范氏力作用,此外,DOM吸附等温方程近于线性还可能与此有关。显然,铁矿物表面作用在对有机质含量低而铁矿物含量高的红壤中污染物和DOM的固定与归宿控制中扮演着重要的角色。  相似文献   

20.
In the present study, Juglans regia shells were used to prepare activated carbon by acid treatment method. J. regia shell-based activated carbon was used for the adsorption of two synthetic dyes namely, a basic dye malachite green and an acid dye amido black 10B. The prepared adsorbent was crushed and sieved to three different mesh sizes 100, 600 and 1,000 μm. The adsorbent was characterized by scanning electron microscopy, surface acidity and zero-point charge. Batch experiments were carried out by varying the parameters like initial aqueous phase pH, adsorbent dosage and initial dye concentration. The equilibrium data were tested with Langmuir, Freundlich, Redlich–Peterson and Sips isotherm at three different temperatures 293, 300 and 313 K and it was found that the Freundlich isotherm best fitted the adsorption of both the dyes. Kinetic data were tested with pseudo first-order model and pseudo second-order model. The mechanism for the adsorption of both the dyes onto the adsorbent was studied by fitting the kinetic data with intraparticle diffusion model and Boyd plot. External mass transfer was found to be the rate-determining step. Based on the ionic nature of the adsorbates, the extent of film diffusion and intraparticle diffusion varied; both being system specific. Thermodynamic parameters were also calculated. Finally, the process parameters of each adsorption system were compared to develop the understanding of the best suitable system.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号