共查询到20条相似文献，搜索用时 46 毫秒
1.
大陆下地壳拆沉模式初探 总被引：21，自引：7，他引：21
下地壳拆沉是人们关注的问题,文中指出下地壳拆沉必须满足至少三个条件：（1）地壳加厚使其下部达到熘辉岩相是拆沉的前提.（2）大规模岩浆活动使大量低密度的中酸性物质移出下地壳,使下地壳密度增加直至超过下伏地幔.由于下地壳榴辉岩石部分熔融所形成的岩浆具有埃达克岩的地球化学特征,因此,大规模魂达克岩的熔出是下地壳拆沉的先决和必要条件.（3）岩石圈地幔转化为软流圈地幔,使下地壳能够进入地幔.陆壳下的岩石圈地幔原先是冷的、刚性的和不易流动的，如果有热和水的加入，可以被软化，使其变成热的、塑性的和易流动的软流圈地幔。因此，岩石圈了幔转化为软流圈地幔是下地壳拆沉的必要条件。作者认为，下地壳不大可能整体拆沉，而很可能是一块一块如飘雪花似地拆沉。如果下地壳的密度降低（低于下伏地幔），如果地幔停止热的供给，如果陆壳底部的软流圈地幔幔又恢复为岩石圈地幔，拆沉即终止。文中讨论了中国东部中生代下地壳拆沉的可能性，探讨了岩石圈减薄的机制，认为下地壳不需要也不可能与岩石圈地幔一道拆况。 相似文献
2.
榴辉岩的弹性波速评述 总被引：2，自引：0，他引：2
文中评述了榴辉岩的密度和高温高压下的纵波速度、速度各向异性、泊松比以及榴辉岩声软化现象的成因 ,着重介绍了榴辉岩的密度和波速对探讨岩石圈物质组成、莫霍界面性质、超高压岩石对实现壳幔物质交换的重要意义。榴辉岩的密度为 3 2～ 3 6 5g·cm-3 ,其中超高压榴辉岩具有更高的密度 (3 4～ 3 6 5g·cm-3 )。榴辉岩的纵波速度 (vp)在 1GPa时为 7 3～8 9km·s-1,其裂隙闭合压力可能高于 1GPa。榴辉岩的压力系数为 0 3～ 0 4km·s-1·GPa-1,温度系数为 - 3 4× 10 -4 km·s-1·℃ -1。它具有最弱的vP 各向异性 (<3% )。超高压榴辉岩的泊松比为 0 2 54～ 0 2 75。大别山榴辉岩的密度和波速研究表明 ,现今的大别山深部地壳可能依然存在榴辉岩 ,但数量应很少 ;大别山上地幔具有同超高压榴辉岩类似的弹性特征 ;拆沉作用是解释超高压榴辉岩折返机制的重要模式之一 ;榴辉岩的形成过程包含了壳幔物质循环作用 ,一部分榴辉岩已拆沉进入深部地幔 ,另一部分则快速折返至地壳内或通过其他构造作用进一步抬升、暴露地表。 相似文献
3.
大洋岩石圈拆沉与大陆下地壳拆沉：不同的机制及意义——兼评“下地壳＋岩石圈地幔拆沉模式” 总被引：6，自引：0，他引：6
拆沉作用(delamination)是地球科学中一个重要的科学问题。本文认为,大洋岩石圈拆沉和大陆下地壳拆沉是不一样的:(1)拆沉的物质不同。大洋岩石圈拆沉的物质包括大洋地壳、岩石圈地幔甚至一部分软流圈地幔,它们共同进入地幔深部;而大陆下地壳拆沉仅仅限制在下地壳,不包括岩石圈地幔。(2)拆沉的动力不同。大洋岩石圈拆沉是由板块俯冲引起的,是地幔对流的产物,因此是一种快速的主动的拆沉;而下地壳拆沉是由于下地壳加厚使下地壳密度增加引起的,还要求其下刚性的岩石圈地幔转变成塑性的软流圈地幔才有可能发生。因此下地壳拆沉要克服许多阻力才能实现,使拆沉成为一个漫长的过程,是慢速的和被动的拆沉。(3)拆沉的过程不同。大洋岩石圈拆沉是由板块俯冲触发的,俯冲导致碰撞,大洋岩石圈从根部断裂,拆沉进入地幔。大陆下地壳拆沉由地壳加厚开始,使下地壳转变为榴辉岩相;随后,岩石圈地幔减薄,直至全部转化为软流圈地幔;下地壳发生部分熔融,形成大规模的(埃达克质)岩浆,使下地壳榴辉岩的密度大于下伏的地幔,从而引发拆沉。大陆下地壳拆沉不大可能是整体进行的,可能是一块一块地被蚕食、被拆沉的。(4)拆沉后的效应不同。大洋岩石圈地幔拆沉,使热的软流圈地幔上涌,从而引发了一系列地质效应:如岩浆活动、地壳抬升、构造松弛以及随后的造山带垮塌等。而下地壳拆沉只引起地壳减薄,高原和山脉垮塌,并不伴有大规模的岩浆活动和地壳抬升等过程。(5)拆沉与岩浆活动的关系不同。主动拆沉导致大规模岩浆活动,而被动拆沉是在大规模岩浆活动的基础上开始的。此外,文中还对"下地壳 岩石圈地幔拆沉"模式提出了质疑,认为该模式有许多难以理解的问题和太多推测的成分,而且与现在保存的地质事实不符。 相似文献
4.
This is a critical comment on the model of basin formation by eclogitization of mafic crust suggested by E. Artyushkov. The eclogitization model bears uncertainties in average parameters (thickness, density, pressure) of lithospheric mantle, crust, and sediments, which may bias the estimates of subsidence magnitude. Main pitfalls, however, lie in high-pressure petrology: The lithostatic pressure is insufficient for eclogite to form in the lower crust beneath deep basins. It is shown that linear extrapolation of laboratory data on the gabbro-to-eclogite transition onto the field of relatively low pressures and temperatures in the lithosphere is incorrect. The hypothesized role of hot mantle fluids in the gabbro-eclogite transformation appears doubtful in terms of both petrology and kinetics of metamorphic reactions. Eclogite volumes in none of well known eclogitic sites agree with those required for eclogitization-driven subsidence. Artyushkov’s criticism of the extension basin formation model is not quite just. There are recent models of a two-layer lithosphere that imply a possibility of brittle and ductile deformation at different crust rheologies. The models we refer to predict most of extension to occur in mantle lithosphere rather than in the crust, this extension being able to produce deep continental basins. 相似文献
5.
在构建东昆仑造山带晚古生代—早中生代地质-物理模型的基础上,利用FLAC软件模拟了幔源岩浆底侵后形成的榴辉岩岩石圈拆沉作用及动力学机制,结果表明,东昆仑造山带在幔源岩浆底侵后确实发生过岩石圈拆沉作用,昆北、昆中、昆南地区的拆沉量差异较大,并形成以橄榄岩、榴辉岩和中酸性麻粒岩为源区的岩浆活动;柴达木地区未发生拆沉作用,而是下沉,同时在高密度层(榴辉岩)的顶部存在较多的断裂。文章探讨了拆沉作用与大规模岩浆活动、盆地形成、C型埃达克岩的关系,认为镁铁质岩石的特殊性质是导致拆沉作用发生的直接动力,岩石圈拆沉之后的深部约束受拆沉的量及范围控制;论证了东昆仑造山带的岩石圈拆沉作用触发了柴达木盆地的形成,并形成一系列热液矿床。 相似文献
6.
G. Ranalli 《Tectonophysics》1994,240(1-4):107-114
The elastic flexural thickness of the lithosphere depends on plate curvature. As curvature increases, the elastic core of the plate is thinned from above (frictional yielding) and from below (plastic creep). Sometimes decoupling between crust and mantle elastic cores can also occur. The mechanical thickness of the lithosphere, on the other hand, is the thickness of the rheologically layered plate having a strength above a critical threshold. In order to estimate the mechanical thickness from a simple uniform-rheology plate model, we adopt a plastic work-hardening constitutive equation, which results in lower stresses in the regions of high strain, relative to the elastic model. It is, therefore, a better approximation to the actual rheology of the flexed lithosphere where there is no lower-crustal decoupling (e.g., in oceanic and in cold continental lithosphere). The equivalent mechanical thickness of the nonlinear plate can be directly obtained, if the curvature is known, from the estimated elastic flexural rigidity or thickness. Comparison with numerical integration of bending moment in rheologically layered lithosphere shows that equivalent mechanical thickness is a good estimation of mechanical thickness. Examination of both oceanic and continental data suggests that mechanical thickness is controlled by the 900 ± 100°C isotherm. This corresponds to a creep strength of the order of 10 MPa in upper mantle material. 相似文献
7.
Eugene V. Artyushkov Michael A. Baer Peter A. Chekhovich Nils-Axel Mrner 《Tectonophysics》2000,320(3-4):271-310
An analysis is presented of the mechanisms of tectonic evolution of the southern part of the Urals between 48N and 60N in the Carboniferous–Triassic. A low tectonic activity was typical of the area in the Early Carboniferous — after closure of the Uralian ocean in the Late Devonian. A nappe, ≥10–15 km thick, overrode a shallow-water shelf on the margin of the East European platform in the early Late Carboniferous. It is commonly supposed that strong shortening and thickening of continental crust result in mountain building. However, no high mountains were formed, and the nappe surface reached the altitude of only ≤0.5 km. No high topography was formed after another collisional events at the end of the Late Carboniferous, in the second half of the Early Permian, and at the start of the Middle Triassic. A low magnitude of the crustal uplift in the regions of collision indicates a synchronous density increase from rapid metamorphism in mafic rocks in the lower crust. This required infiltration of volatiles from the asthenosphere as a catalyst. A layer of dense mafic rocks, 20 km thick, still exists at the base of the Uralian crust. It maintains the crust, up to 60 km thick, at a mean altitude 0.5 km. The mountains, 1.5 km high, were formed in the Late Permian and Early Triassic when there was no collision. Their moderate height precluded asthenospheric upwelling to the base of the crust, which at that time was 65–70 km thick. The mountains could be formed due to delamination of the lower part of mantle root with blocks of dense eclogite and/or retrogression in a presence of fluids of eclogites in the lower crust into less dense facies.
The formation of foreland basins is commonly attributed to deflection of the elastic lithosphere under surface and subsurface loads in thrust belts. Most of tectonic subsidence on the Uralian foreland occurred in a form of short impulses, a few million years long each. They took place at the beginning and at the end of the Late Carboniferous, and in the Late Permian. Rapid crustal subsidence occurred when there was no collision in the Urals. Furthermore, the basin deepened away from thrust belt. These features preclude deflection of the elastic lithosphere as a subsidence mechanism. To ensure the subsidence, a rapid density increase was necessary. It took place due to metamorphism in the lower crust under infiltration of volatiles.
The absence of flexural reaction on the Uralian foreland on collision in thrust belt together with narrow-wavelength basement deformations under the nappe indicate a high degree of weakening of the lithosphere. Such deformations took also place on the Uralian foreland at the epochs of rapid subsidences when there was no collision in thrust belt. Weakening of the lithosphere can be explained by infiltration of volatiles into this layer from the asthenosphere and rapid metamorphism in the mafic lower crust. Lithospheric weakening allowed the formation of the Uralian thrust belt under convergent motions of the plates which were separated by weak areas. 相似文献
8.
I. Bryhni D. H. Green K. S. Heier W. S. Fyfe 《Contributions to Mineralogy and Petrology》1970,26(1):12-19
Recent experimental data show that eclogites may form in the crust under conditions where total pressure exceeds water pressure. The regional distribution of eclogites in Western Norway and their association with crustal rocks makes their formation in the crust the most attractive hypothesis. Before a mantle origin should be assigned to any rock within this eclogite and garnet peridotite area it should be demonstrated that their country rocks are in a metamorphic state incompatible with the load pressures required for eclogite stability. Criteria for ascertaining eclogite formation in the crust are discussed.Publication no. 8 in the Norwegian geotraverse project. 相似文献
9.
大别山榴辉岩的密度和波速及其对壳—幔循环的启示 总被引：7，自引：0，他引：7
测定了大别山地区榴辉岩和麻粒岩的密度和高温高压 (至 5 .0GPa和 130 0℃ )的纵波速度 (Vp)。超高压榴辉岩具有较高的密度和Vp 及较弱的各向异性。榴辉岩的压力系数为 0 .2 2～ 0 .33km/s·GPa ,超高压榴辉岩的温度系数为 - 3.41× 10 -4 km/s·℃。榴辉岩的密度和波速的分析表明 ,地幔深部的超高压榴辉岩形成后可能包含了两个过程 ,即一部分榴辉岩通过拆沉作用进入深部地幔 ,另一部分快速折返至地壳内或地表 ,榴辉岩的形成过程代表了壳幔物质循环。现今的大别山深部可能只存在少量榴辉岩。 相似文献
10.
俯冲带部分熔融 总被引：3，自引：3，他引：0
俯冲带是地幔对流环的下沉翼,是地球内部的重要物理与化学系统。俯冲带具有比周围地幔更低的温度,因此,一般认为俯冲板片并不会发生部分熔融,而是脱水导致上覆地幔楔发生部分熔融。但是,也有研究认为,在水化的洋壳俯冲过程中可以发生部分熔融。特别是在下列情况下,俯冲洋壳的部分熔融是俯冲带岩浆作用的重要方式。年轻的大洋岩石圈发生低角度缓慢俯冲时,洋壳物质可以发生饱和水或脱水熔融,基性岩部分熔融形成埃达克岩。太古代的俯冲带很可能具有与年轻大洋岩石圈俯冲带类似的热结构,俯冲的洋壳板片部分熔融可以形成英云闪长岩-奥长花岗岩-花岗闪长岩。平俯冲大洋高原中的基性岩可以发生部分熔融产生埃达克岩。扩张洋中脊俯冲可以导致板片窗边缘的洋壳部分熔融形成埃达克岩。与俯冲洋壳相比,俯冲的大陆地壳具有很低的水含量,较难发生部分熔融,但在超高压变质陆壳岩石的折返过程中可以经历广泛的脱水熔融。超高压变质岩在地幔深部熔融形成的熔体与地幔相互作用是碰撞造山带富钾岩浆岩的可能成因机制。碰撞造山带的加厚下地壳可经历长期的高温与高压变质和脱水熔融,形成S型花岗岩和埃达克质岩石。 相似文献
11.
华北克拉通晚中生代壳-幔拆离作用: 岩石流变学约束 总被引：6，自引：5，他引：1
大陆岩石圈的流变学结构对于岩石圈深部过程(壳/幔过程)有着深刻的影响,直接表现在岩石圈壳-幔结构与浅部构造上.本文注意到华北克拉通晚中生代岩石圈减薄期间地壳的伸展、拆离与减薄在不同地区的宏观、微观构造及地壳岩石流变学等方面的差异表现与区域变化,以及现今和晚中生代时期岩石圈厚度的不均匀性.讨论了以水为主体的地质流体的存在对于岩石圈流变性的影响.综合克拉通东部与西部地壳/地幔厚度变化特点以及下地壳和上地幔含水性特点,阐述了晚中生代时期华北克拉通岩石圈内部壳幔耦合与解耦的规律,提出了华北岩石圈壳-幔拆离作用模型以解释华北克拉通晚中生代岩石圈减薄的基本现象与深部过程.提出区域性伸展作用是岩石圈减薄的主要动力学因素,东部地区在晚中生代伸展作用过程中壳-幔具有典型的解耦性,上部地壳、下部地壳和岩石圈地幔的变形具有显著差异性.而西部区壳幔总体具有耦合性,下地壳与岩石圈地幔共同构成流变学强度很高且难以变形的岩石圈根. 相似文献
12.
蛇绿岩型金刚石和铬铁矿深部成因 总被引：5，自引：0，他引：5
地球上的原生金刚石主要有3种产出类型,分别来自大陆克拉通下的深部地幔金伯利岩型金刚石、板块边界深俯冲变质岩中超高压变质型金刚石,和陨石坑中的陨石撞击型金刚石。在全球5个造山带的10处蛇绿岩的地幔橄榄岩或铬铁矿中均发现金刚石和其他超高压矿物的基础上,我们提出地球上一种新的天然金刚石产出类型,命名为蛇绿岩型金刚石。认为蛇绿岩型金刚石普遍存在于大洋岩石圈的地幔橄榄岩中,并提出蛇绿岩型金刚石和铬铁矿的深部成因模式。认为早期俯冲的地壳物质到达地幔过渡带(410~660 km深度)后被肢解,加入到周围的强还原流体和熔体中,当熔融物质向上运移到地幔过渡带顶部,铬铁矿和周围的地幔岩石以及流体中的金刚石等深部矿物一并结晶,之后,携带金刚石的铬铁矿和地幔岩石被上涌的地幔柱带至浅部,经历了洋盆的拉张和俯冲阶段,最终在板块边缘就位。 相似文献
13.
Ultrahigh-pressure eclogite transformed from mafic granulite in the Dabie orogen, east-central China 总被引：1，自引：0，他引：1
Although ultrahigh‐pressure (UHP) metamorphic rocks are present in many collisional orogenic belts, almost all exposed UHP metamorphic rocks are subducted upper or felsic lower continental crust with minor mafic boudins. Eclogites formed by subduction of mafic lower continental crust have not been identified yet. Here an eclogite occurrence that formed during subduction of the mafic lower continental crust in the Dabie orogen, east‐central China is reported. At least four generations of metamorphic mineral assemblages can be discerned: (i) hypersthene + plagioclase ± garnet; (ii) omphacite + garnet + rutile + quartz; (iii) symplectite stage of garnet + diopside + hypersthene + ilmenite + plagioclase; (iv) amphibole + plagioclase + magnetite, which correspond to four metamorphic stages: (a) an early granulite facies, (b) eclogite facies, (c) retrograde metamorphism of high‐pressure granulite facies and (d) retrograde metamorphism of amphibolite facies. Mineral inclusion assemblages and cathodoluminescence images show that zircon is characterized by distinctive domains of core and a thin overgrowth rim. The zircon core domains are classified into two types: the first is igneous with clear oscillatory zonation ± apatite and quartz inclusions; and the second is metamorphic containing a granulite facies mineral assemblage of garnet, hypersthene and plagioclase (andesine). The zircon rims contain garnet, omphacite and rutile inclusions, indicating a metamorphic overgrowth at eclogite facies. The almost identical ages of the two types of core domains (magmatic = 791 ± 9 Ma and granulite facies metamorphic zircon = 794 ± 10 Ma), and the Triassic age (212 ± 10 Ma) of eclogitic facies metamorphic overgrowth zircon rim are interpreted as indicating that the protolith of the eclogite is mafic granulite that originated from underplating of mantle‐derived magma onto the base of continental crust during the Neoproterozoic (c. 800 Ma) and then subducted during the Triassic, experiencing UHP eclogite facies metamorphism at mantle depths. The new finding has two‐fold significance: (i) voluminous mafic lower continental crust can increase the average density of subducted continental lithosphere, thus promoting its deep subduction; (ii) because of the current absence of mafic lower continental crust in the Dabie orogen, delamination or recycling of subducted mafic lower continental crust can be inferred as the geochemical cause for the mantle heterogeneity and the unusually evolved crustal composition. 相似文献
14.
"罗田穹隆"中的下地壳俯冲成因榴辉岩及其地质意义 总被引：12，自引：0，他引：12
在“罗田穹隆”中发现了下地壳俯冲成因榴辉岩．榴辉岩呈透镜状或板状产于含石榴子石条带状片麻岩中．新鲜的榴辉岩主要由石榴子石、绿辉石、金红石等组成．含少量退变质的角闪石、斜长石、紫苏辉石、透辉石、(钛)磁铁矿和石英等．研究区榴辉岩以保留早期麻粒岩相变质矿物残留体以及经受晚期麻粒岩相和角闪岩相退变为特征．指示它们由扬子镁铁质下地壳麻粒岩相岩石俯冲到深部发生变质并形成榴辉岩．然后折返至下地壳发生麻粒岩相退变，由于麻粒岩相退变质阶段仅以后成合晶形式出现．因而它们可能在下地壳停留时间不长．就又进一步被构造抬升至中上地壳而发生角闪岩相退变．大别山造山带乃至扬子板块北缘现今缺乏厚层镁铁质下地壳．它们也很少出露地表．推测这些俯冲的镁铁质下地壳可能已拆离再循环进人地幔．从而为“罗田穹隆”的形成和演化以及大别山高压-超高压岩石的形成与折返机制等研究提供了关键性的岩石学证据。 相似文献
15.
E.V. Artyushkov 《Russian Geology and Geophysics》2010,51(1):48-57
The large North Chukchi Basin in the northeastern Eurasian shelf is filled with up to 22 km of sediments, which is far thicker than filling a basin upon oceanic crust would require. The basin sedimentation began 380 Myr ago, and about 16 km of sediments have been deposited for the past 125 Myr, long after the oceanic crust would have completed its subsidence. This fact is in favor of the continental instead of oceanic crust origin. Rapid basin subsidence appears to be driven by a mechanism other than crustal stretching as the latter has no evidence over the greatest part of the basin area. The suggested basin formation model implies a transformation of gabbro into denser eclogite in the lower crust and related contraction of mafic rocks. To sustain consolidated crust beneath 22 km thick sediments, the layer of dense eclogites under the granitic layer must be at least ～25 km thick. The presence of basement flexures formed at several stages of the basin evolution indicates a considerable loss of lithospheric rigidity under the effect of fluid infiltration from small mantle plumes. The fluids catalyzed the eclogitization and thus increased the subsidence rate. Rapid subsidence apparently occurred in Barremian-Albian time when the basin had accumulated up to 11.5 km of sediments. Besides the Early Cretaceous event, there were, possibly several older events of rapid subsidence. This basin subsidence history, along with the evidence of steep lithospheric flexure, is a known feature of large petroleum basins. Therefore, the North Chukchi Basin may be expected to be an oil and gas producer. 相似文献
16.
A.V. Sobolev S.V. Sobolev D.V. Kuzmin K.N. Malitch A.G. Petrunin 《Russian Geology and Geophysics》2009,50(12):999-1033
Here we combine petrological-geochemical and thermomechanical modeling techniques to explain origin of primary magmas of both Maimecha–Kotui meimechites and the Gudchikhinskaya basalts of Norilsk region, which represent, respectively, the end and the beginning of flood magmatism in the Siberian Trap Province.We have analyzed the least altered samples of meimechites, their olivine phenocrysts, and melt inclusions in olivines, as well as samples of dunites and their olivines, from boreholes G-1 and G-3 within the Guli volcanoplutonic complex in the Maimecha–Kotui igneous province of the northern Siberian platform. The Mn/Fe and Ni/MgO ratios in olivines indicate a mantle peridotite source of meimechites. Meimechite parental magma that rose to shallow depths was rich in alkalis and highly magnesian (24 wt.% MgO), largely degassed, undersaturated by sulfide liquid and oxidized. At greater depths, it was, likely, high in CO2 (6 wt.%) and H2O (2 wt.%) and resulted from partial melting of initially highly depleted and later metasomatized harzburgite some 200 km below the surface. Trace-element abundances in primary meimechite magma suggest presence of garnet and K-clinopyroxene, in the mantle source and imply for genetic link to the sources of the early Siberian flood basalts (Gudchikhinskaya suite) and kimberlites. The analyzed dunite samples from the Guli complex have chemistry and mineralogy indicating their close relation to meimechites.We have also computed thermomechanical model of interaction of a hot mantle plume with the shield lithosphere of variable thickness, using realistic temperature- and stress-dependent visco-elasto-plastic rocks rheology and advanced finite element solution technique.Based on our experimental and modeling results we propose that a Permian–Triassic plume, with potential temperature of about 1650 °C transported a large amount of recycled ancient oceanic crust (up to 15%) as SiO2-supersaturated carbonated eclogite. Low-degree partial melting of eclogite at depths of 250–300 km produced carbonate-silicate melt that metasomatized the lithospheric roots of the Siberian shield. Further rise of the plume under relatively attenuated lithosphere (Norilsk area) led to progressive melting of eclogite and formation of reaction pyroxenite, which then melted at depths of 130–180 km. Consequantly, a large volume of melt (Gudchikhinskaya suite) penetrated into the lithosphere and caused its destabilization and delamination. Delaminated lithosphere that included fragments of locally metasomatized depleted harzburgite subsided into the plume and was heated to the temperatures of the plume interior with subsequent generation of meimechite magma. Meimechites showed up at the surface only under thicker part of the lithosphere aside from major melting zone above because otherwise they were mixed up in more voluminous flood basalts. We further suggest that meimechites, uncontaminated Siberian flood basalts and kimberlites all shear the same source of strongly incompatible elements, the carbonated recycled oceanic crust carried up by hot mantle plume. 相似文献
17.
A general model for the intrusion and evolution of 'mantle' garnet peridotites in high-pressure and ultra-high-pressure metamorphic terranes 总被引：8，自引：1，他引：7
Garnet‐bearing peridotite lenses are minor but significant components of most metamorphic terranes characterized by high‐temperature eclogite facies assemblages. Most peridotite intrudes when slabs of continental crust are subducted deeply (60–120 km) into the mantle, usually by following oceanic lithosphere down an established subduction zone. Peridotite is transferred from the resulting mantle wedge into the crustal footwall through brittle and/or ductile mechanisms. These ‘mantle’ peridotites vary petrographically, chemically, isotopically, chronologically and thermobarometrically from orogen to orogen, within orogens and even within individual terranes. The variations reflect: (1) derivation from different mantle sources (oceanic or continental lithosphere, asthenosphere); (2) perturbations while the mantle wedges were above subducting oceanic lithosphere; and (3) changes within the host crustal slabs during intrusion, subduction and exhumation. Peridotite caught within mantle wedges above oceanic subduction zones will tend to recrystallize and be contaminated by fluids derived from the subducting oceanic crust. These ‘subduction zone peridotites’ intrude during the subsequent subduction of continental crust. Low‐pressure protoliths introduced at shallow (serpentinite, plagioclase peridotite) and intermediate (spinel peridotite) mantle depths (20–50 km) may be carried to deeper levels within the host slab and undergo high‐pressure metamorphism along with the enclosing rocks. If subducted deeply enough, the peridotites will develop garnet‐bearing assemblages that are isofacial with, and give the same recrystallization ages as, the eclogite facies country rocks. Peridotites introduced at deeper levels (50–120 km) may already contain garnet when they intrude and will not necessarily be isofacial or isochronous with the enclosing crustal rocks. Some garnet peridotites recrystallize from spinel peridotite precursors at very high temperatures (c. 1200 °C) and may derive ultimately from the asthenosphere. Other peridotites are from old (>1 Ga), cold (c. 850 °C), subcontinental mantle (‘relict peridotites’) and seem to require the development of major intra‐cratonic faults to effect their intrusion. 相似文献
18.
To assess the possibility that the North Atlantic Ocean may subduct at Scotian basin east of Canada, we investigate the present compensation state of this deep basin. A Fourier domain analysis of the bathymetry, depth to basement and observed gravity anomalies over the oceanic area east of Nova Scotia indicates that the basin is not isostatically compensated. Moreover, the analysis emphasizes that in addition to the sediments, density perturbations exist beneath the basin. The load produced by the sediments and these density perturbations must have been supported by the lithosphere. We simulate the flexure of the lithosphere under this load by that of a thin elastic plate overlying an inviscid interior. It is shown that a plate with a uniform rigidity does not adequately represent the lithosphere beneath the basin as well as the oceanic lithosphere far from the basin, rather the rigidity of the lithosphere directly beneath the basin is about one to two orders of magnitude smaller than elsewhere. We relate this weakening to the thermal blanketing effects of the thick sediments and the fact that the lithosphere has a temperature-dependent rheology. We suggest that this weak zone would have a controlling effect on the reactivation of normal faults at the hinge zone of the basin, that were formed during the break-up of Africa and North America and were locked in the early stages after the break-up. The weak zone would facilitate reactivation of the faults if tensional stresses were produced by possible reorientation of the spreading direction of the North Atlantic Ocean in the future. The reactivation of the faults would create a free boundary condition at the hinge zone, allowing further bending of the lithosphere beneath the basin and juxtaposition of this lithosphere to the mantle beneath the continent. This may provide a favorable situation for initiation of slow subduction due to subsequent compressional forces. 相似文献
19.
20.
Laurent Geoffroy 《Comptes Rendus Geoscience》2005,337(16):575
Compared to non-volcanic ones, volcanic passive margins mark continental break-up over a hotter mantle, probably subject to small-scale convection. They present distinctive genetic and structural features. High-rate extension of the lithosphere is associated with catastrophic mantle melting responsible for the accretion of a thick igneous crust. Distinctive structural features of volcanic margins are syn-magmatic and continentward-dipping crustal faults accommodating the seaward flexure of the igneous crust. Volcanic margins present along-axis a magmatic and tectonic segmentation with wavelength similar to adjacent slow-spreading ridges. Their 3D organisation suggests a connection between loci of mantle melting at depths and zones of strain concentration within the lithosphere. Break-up would start and propagate from localized thermally-softened lithospheric zones. These ‘soft points’ could be localized over small-scale convection cells found at the bottom of the lithosphere, where adiabatic mantle melting would specifically occur. The particular structure of the brittle crust at volcanic passive margins could be interpreted by active and sudden oceanward flow of both the unstable hot mantle and the ductile part of the lithosphere during the break-up stage. To cite this article: L. Geoffroy, C. R. Geoscience 337 (2005). 相似文献