首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
A sandy deposit from the 1929 Grand Banks tsunami in Newfoundland contains sediment from two distinct sources, one from an inferred gravel shoreline close to the deposit, and one from a sandy dune some 200 m seaward of the deposit. The deposit ranges from 0 to 15 cm thick, and is composed of a bimodal mix of fine and coarse sand. We took approximately 100 core samples of this deposit in an attempt to characterize lateral grain size trends within the sand. Although the coarse fraction does fine with distance inland, the fine fraction does not change size over the study area, and the aggregate grain size changes in no systematic way.

We interpret this deposit to represent the mixture of material picked up at the bar with material picked up at the gravel shoreline. The bar material does not fine in part because it is already fairly well sorted, but also because it is far from its source. The shoreline material, on the other hand, is poorly sorted so that the tsunami took only those grains it was capable of moving, and deposited them near their source.

We estimated the size of the tsunami by determining the flow depth-flow velocity combinations required to advect sand from the bar to the back of the deposit, and by estimating the shear velocity required for motion of the largest grain we found during our survey. This modeling indicates an average flow depth of about 2.5–2.8 m over the area, at a flow velocity of 1.9–2.2 m/s. This estimate compares well with eyewitness accounts of a maximum flow depth of 7 m at the shoreline if our estimate represents an average over the whole study area.  相似文献   


2.
Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity.

Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial.

The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.  相似文献   


3.
A coupled hydrostatic and morph-dynamic model COMCOT-SED was used to investigate the morphological change in Lhok Nga bay during the 2004 Indian Ocean tsunami, and the coupled model predicted the thickness of tsunami deposits in agreement with the measured ones. The relationship between the characteristics of tsunami deposit and flow hydrodynamics was discussed in details. Phenomena such as landward thinning in deposit thickness, landward fining in grain size, and fining upwards in grain size are commonly used to identify tsunami deposits and were examined in this case study. We also discussed the effects of sediment supplies and the constraints that can be put on the earthquake parameters using the information derived from tsunami deposits. This study shows that the model presented in this paper is capable of simulating extreme tsunami events (tsunami wave height ~30?m) in a large domain and that forward models of tsunami sediment transport can be a promising tool to help tsunami geologists understand tsunami deposits.  相似文献   

4.
Coastal communities in the western United States face risks of inundation by distant tsunamis that propagate across the Pacific Ocean as well as local tsunamis produced by great (Mw?>?8) earthquakes on the Cascadia subduction zone. In 1964, the Mw 9.2 Alaska earthquake launched a Pacific-wide tsunami that flooded Cannon Beach, a small community (population 1640) in northwestern Oregon, causing over $230,000 in damages. However, since the giant 2004 Indian Ocean tsunami, the 2010 Chile tsunami and the recent 2011 Tohoku-Oki tsunami, renewed concern over potential impacts of a Cascadia tsunami on the western US has motivated closer examination of the local hazard. This study applies a simple sediment transport model to reconstruct the flow speed of the most recent Cascadia tsunami that flooded the region in 1700 using the thickness and grain size of sand layers deposited by the waves. Sedimentary properties of sand from the 1700 tsunami deposit provide model inputs. The sediment transport model calculates tsunami flow speed from the shear velocity required to suspend the quantity and grain size distribution of the observed sand layers. The model assumes a steady, spatially uniform tsunami flow and that sand settles out of suspension forming a deposit when the flow velocity decreases to zero. Using flow depths constrained by numerical tsunami simulations for Cannon Beach, the sediment transport model calculated flow speeds of 6.5?C7.6?m/s for sites within 0.6?km of the beach and higher flow speeds (~8.8?m/s) for sites 0.8?C1.2?km inland. Flow speed calculated for sites within 0.6?km of the beach compare well with maximum velocities estimated for the largest tsunami simulation. The higher flow speeds calculated for the two sites furthest landward contrast with much lower maximum velocities (<3.8?m/s) predicted by numerical simulations. Grain size distributions of sand layers from the most distal sites are inconsistent with deposition from sediment falling out of suspension. We infer that rapid deceleration in tsunami flow and convergences in sediment transport formed unusually thick deposits. Consequently, higher flow speeds calculated by the sediment model probably overestimate the actual wave speed at sites furthest inland.  相似文献   

5.
Tsunami deposits have been found at more than 60 sites along the Cascadia margin of Western North America, and here we review and synthesize their distribution and sedimentary characteristics based on the published record. Cascadia tsunami deposits are best preserved, and most easily identified, in low-energy coastal environments such as tidal marshes, back-barrier marshes and coastal lakes where they occur as anomalous layers of sand within peat and mud. They extend up to a kilometer inland in open coastal settings and several kilometers up river valleys. They are distinguished from other sediments by a combination of sedimentary character and stratigraphic context. Recurrence intervals range from 300–1000 years with an average of 500–600 years. The tsunami deposits have been used to help evaluate and mitigate tsunami hazards in Cascadia. They show that the Cascadia subduction zone is prone to great earthquakes that generate large tsunamis. The inclusion of tsunami deposits on inundation maps, used in conjunction with results from inundation models, allows a more accurate assessment of areas subject to tsunami inundation. The application of sediment transport models can help estimate tsunami flow velocity and wave height, parameters which are necessary to help establish evacuation routes and plan development in tsunami prone areas.  相似文献   

6.
The widespread sheets of fine particulate sediment frequently deposited by tsunami constitute valuable evidence from which to reconstruct tsunami inundation. This is illustrated with evidence from three sites near Montrose, in eastern Scotland, U.K., where a horizon of mainly sand, laid down during the Holocene Storegga Slide palaeotsunami of circa 8000 BP is examined. The horizon is remarkably consistent in its distribution, morphology, stratigraphy, and particle size characteristics. These properties allow inferences to be made on the nature of tsunami flow onshore and run-up. It is suggested that estimates can be made of the possible depth of water involved from the characteristics of the sediment, and thus of the extent of inundation involved in the tsunami at these sites.  相似文献   

7.
A series of elevated imbricated boulders were investigated on the Otago coastline, southeast New Zealand, through field surveying and optical luminescence dating. By using established hydrodynamic relationships of sediment transport the energy required to move the clasts was calculated and compared to the historic record of marine inundations of that coast. The boulders are platy in shape and are over 2 m long in some cases, and are sourced from a locally outcropping conglomerate unit which appears to be the only lithology on this section of coast that erodes to produce clasts of this size. It is estimated that the boulders were deposited by a tsunami between 2 and 3 m high during the latter part of Marine Isotope Stage 5. They therefore represent the first pre-Holocene tsunami deposit and one composed of large boulders described on the New Zealand coastline.  相似文献   

8.
Geological identification of past tsunamis is important for risk assessment studies, especially in areas where the historical record is limited or absent. The main problem when using the geological evidence is to distinguish between tsunami and storm deposits. Both are high-energy events that may leave marine traces in coastal stratigraphic sequences. At Martinhal, SW Portugal both storm surge and tsunami deposits are present at the same site within a single stratigraphic sequence, which makes it suitable to study the differences between them, excluding variations caused by local factors.

The tsunami associated with the Lisbon earthquake of November 1st 1755 AD, had a major impact on the geomorphology and sedimentology of Martinhal. It breached the barrier and laid down an extensive sheet of sand, as described in eyewitness reports. Besides the tsunami deposit the stratigraphy of Martinhal also displays evidence for storm surges that have breached and overtopped the barrier, flooding the lowland and leaving sand layers. Both marine-derived flood deposits show similar grain size characteristics and distinctive marine foraminifera. The most important differences are the rip-up clasts and boulders exclusively found in the tsunami deposit and the landward extent of the tsunami deposit that everywhere exceeds that of the storm deposits. Identification of both depositional units was only possible using a collection of different data and extensive stratigraphical information from cores as well as trenches.  相似文献   


9.
This study proposes a tsunami depositional model based on observations of emerged Holocene tsunami deposits in outcrops located in eastern Japan. The model is also applicable to the identification of other deposits, such as those laid down by storms. The tsunami deposits described were formed in a small bay of 10–20-m water depth, and are mainly composed of sand and gravel. They show various sedimentary structures, including hummocky cross-stratification (HCS) and inverse and normal grading. Although, individually, the sedimentary structures are similar to those commonly found in storm deposits, the combination of vertical stacking in the tsunami deposits makes a unique pattern. This vertical stacking of internal structures is due to the waveform of the source tsunamis, reflecting: 1) extremely long wavelengths and wave period, and 2) temporal changes of wave sizes from the beginning to end of the tsunamis.

The tsunami deposits display many sub-layers with scoured and graded structures. Each sub-layer, especially in sandy facies, is characterized by HCS and inverse and normal grading that are the result of deposition from prolonged high-energy sediment flows. The vertical stack of sub-layers shows incremental deposition from the repeated sediment flows. Mud drapes cover the sub-layers and indicate the existence of flow-velocity stagnant stages between each sediment flow. Current reversals within the sub-layers indicate the repeated occurrence of the up- and return-flows.

The tsunami deposits are vertically divided into four depositional units, Tna to Tnd in ascending order, reflecting the temporal change of wave sizes in the tsunami wave trains. Unit Tna is relatively fine-grained and indicative of small tsunami waves during the early stage of the tsunami. Unit Tnb is a protruding coarse-grained and thickest-stratified division and is the result of a relatively large wave group during the middle stage of the tsunami. Unit Tnc is a fine alternation of thin sand sheets and mud drapes, deposited from waning waves during the later stage of the tsunami. Unit Tnd is deposited during the final stage of the tsunami and is composed mainly of suspension fallout. Cyclic build up of these sub-layers and depositional units cannot be explained by storm waves with short wave periods of several to ten seconds common in small bays.  相似文献   


10.
Sue Dawson   《Sedimentary Geology》2007,200(3-4):328-335
Distinctive diatom assemblages may be associated with tsunami sediments and may often contrast with the assemblages found within sediments underlying the tsunami deposit as well as those associated with the modern coastal environment. Sediments associated with the 1998 tsunami that destroyed much of the Sissano lagoon area in northern Papua New Guinea have been investigated. Surface sediments from three transects across the sediment spit near Warapu have been examined for diatom content and preservation. The preservation is variable, and the data show an, often chaotic, assemblage that can be attributed to the tsunami waves incorporating and depositing diatoms from distinctive habitat zones during their runup and subsequent backwash. The diatoms identified within the Warapu sediments indicate an origin from within the inter-tidal and offshore area rather than from the beach–sand spit complex. The sand deposits disclose a high percentage, in excess of 75%, of broken diatom valves, and a predominance of centric (circular) species due to preferential preservation. The study demonstrates that the application of diatom biostratigraphy to modern tsunami deposits can be used in conjunction with other stratigraphical lines of evidence to interpret the source and provenance of historical and palaeo-tsunami deposits.  相似文献   

11.
A combined approach of field geology and numerical simulation was conducted for evaluating the tsunami impacts on the shelf sediments. The 2003 Tokachi-oki earthquake, M 8.0, that occurred on 25 September 2003 off southeastern Hokkaido, northern Japan, generated a locally destructive tsunami. Maximum run-up height of the tsunami waves reached 4 m above sea level. In order to estimate the tsunami impacts on shallow marine sediments, we compared pre- and post-tsunami marine sediments in water depths of 38–112 m in terms of grain size, sedimentary structure, and microfossil content. Decreases of fine fractions, especially finer than very fine sand, which led to coarsen the mean grain size, were detected in the inner shelf of the northern part of the study area. Foraminiferal assemblages also changed in the coarsened sediments. On the other hand, the other shelf sediments largely unchanged or slightly fined. We also simulated the tsunami wave velocity and direction, and grain size entrained by the modeled tsunami. The numerical simulation resulted in that the 2003 tsunami could transport very fine sand in water depths shallower than 45–95 m at the northern part of the study area. This is comparable with the actual grain-size changes after the tsunami had passed. However, some storms and tidal currents might also be possible to stir the surface sediments after the pre-tsunami survey, so we could not conclude that the grain-size changes had been caused only by the tsunami. Nevertheless, a combined approach of sampling and modeling was powerful for estimating the tsunami impacts under the sea.  相似文献   

12.
The sandy deposits produced by tsunamis and liquefaction share many sedimentary features, and distinctions between the two are important in seismically active coastal zones. Both types of deposits are present in the wetlands bordering Puget Sound, where one or more earthquakes about 1100 years ago caused both tsunami flooding and sediment venting. This co‐occurrence allows an examination of the resulting deposits and a comparison with tsunami and liquefaction features of modern events. Vented sediments occur at four of five wetland field localities and tsunami deposits at two. In comparison with tsunami deposits, vented sediments in this study and from other studies tend to be thicker (although they can be thin). Vented sediments also have more variable thickness at both outcrop and map scale, are associated with injected dykes and contain clasts derived from underlying deposits. Further, vented sediments tend to contain a greater variety of sedimentary structures, and these structures vary laterally over metres. Tsunami deposits compared with vented sediments are commonly thinner, fine and thin landward more consistently, have more uniform thickness on outcrop and map scales, and have the potential of containing coarser clasts, up to boulders. For both tsunami deposits and vented sediments, the availability and grain size of source material condition the characteristics of the deposit. In the cases presented in this paper, both foraminifera and diatom assemblages within tsunami deposits and vented sediments consisted of brackish and marine species, and no distinction between processes could be made based on microfossils. In summary, this study indicates a need for more careful analysis and mapping of coastal sediments associated with earthquakes to avoid misidentification of processes and misevaluation of hazards.  相似文献   

13.
A case study was conducted for the Thailand Khao Lak coast using a forward numerical model to understand uncertainties associated with interpreting tsunami deposits and relating them to their tsunami sources. We examined possible effects of the characteristics of tsunami source, multiple waves, sediment supply and local land usages. Numerical results showed that tsunami-deposit extent and thickness could be indicative of the slip value in the source earthquake near the surveyed coastal locations, provided that the sediment supply is unlimited and all the deposits are well preserved. Deposit thickness was found to be largely controlled by the local topography and could be easily modified by backwash flows or subsequent tsunami flows. Between deposit extent and deposit thickness, using deposit extent to interpret the characteristics of a tsunami source is preferable. The changing of land usages between two tsunami events could be another important factor that can significantly alter deposit thickness. There is a need to develop inversion models based on tsunami heights and/or run-up data for studying paleotsunamis.  相似文献   

14.
X-ray tomography is used to analyse the grain size and sedimentary fabric of two tsunami deposits in the Marquesas Islands (French Polynesia, Pacific Ocean) which are particularly exposed to trans-Pacific tsunamis. One site is located on the southern coast of Nuku Hiva Island (Hooumi) and the other one is on the southern coast of Hiva Oa Island (Tahauku). Results are compared with other techniques such as two-dimensional image analysis on bulk samples (particle analyser) and anisotropy of magnetic susceptibility. The sedimentary fabric is characterized through three-dimensional stacks of horizontal slices (following a vertical step of 2·5 mm along the cores), while grain-size distribution is estimated from two-dimensional vertical slices (following a step of 2 mm). Four types of fabric are distinguished: (a) moderate to high angle (15 to 75°); (b) bimodal low-angle (<15°); (c) low to high angle with at least two different orientations; and (d) dispersed fabric. The fabric geometry in a tsunami deposit is not only controlled by the characteristics of the flow itself (current strength, flow regime, etc.) but also sediment concentration, deposition rate and grain-size distribution. There is a notable correlation between unimodal high-angle fabric – type (a) – and finely-skewed grain-size distribution. The two tsunami deposits studied represent two different scenarios of inundation. As demonstrated here, X-ray tomography is an essential method for characterizing past tsunamis from their deposits. The method can be applied to many other types of sediments and sedimentary rocks.  相似文献   

15.
This study develops a method for estimating the number of casualties that may occur while people evacuate from an inundation zone when a tsunami has inundated an area. The method is based on a simple model of hydrodynamic forces as they affect the human body. The method uses a Tsunami casualty index (TCI) computed at each grid point of a numerical tsunami model to determine locations and times within the tsunami inundation zone where evacuation during the tsunami inundation is not possible and therefore where casualties are likely to occur. The locations and times can be combined with information about population density to compute the potential number of casualties. This information is useful in developing tsunami evacuation routes that avoid such locations. To illustrate the method, it is applied to the Seattle waterfront in Washington State, USA, that is under the threat of possible tsunami disasters due to Seattle Fault earthquakes. Preliminary results suggest that the tsunami casualties may occur within the Seattle waterfront for 15 min, during the time interval from 3 to 18 min after a large Seattle Fault tsunami is generated when the background tide level is mean high water.  相似文献   

16.
A 2.73 m long sediment sequence from Loon Lake, located at 18 m a.s.l. on outer Geographical Society Ø, East Greenland, was investigated for its chronology and changes in physical and biogeochemical properties, macrofossils, and grain‐size distribution. The predominance of marine fossils throughout the sequence, dated by 14C AMS to between 8630 and 7535 cal. yr BP, shows that the Loon Lake at that time was a marine basin, which according to existing sea‐level curves was about 15–35 m deep. The sequence mainly consists of fine grained homogeneous sediments, which are interrupted by a 0.72 m thick sandy horizon with erosive basis and distinct fluctuations in the grain‐size distribution and in the physical and biogeochemical properties. According to the radiocarbon dates, this sandy horizon was deposited after 8500–8300 cal. yr BP and is interpreted as originating from the Storegga tsunami. The record from Loon Lake provides the first indication of Storegga tsunami deposits from East Greenland. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

17.
The Indian Ocean tsunami flooded the coastal zone of the Andaman Sea and left tsunami deposits with a thickness of a few millimetres to tens of centimetres over a roughly one-kilometre-wide tsunami inundation zone. The preservation potential and the post-depositional changes of the onshore tsunami deposits in the coastal plain setting, under conditions of a tropical climate with high seasonal rainfall, were assessed by reinvestigating trenches located along 13 shore-perpendicular transects; the trenches were documented shortly after the tsunami and after 1, 2, 3 and 4 years. The tsunami deposits were found preserved after 4 years at only half of the studied sites. In about 30% of the sites, the tsunami deposits were not preserved due to human activity; in a further 20% of the sites, the thin tsunami deposits were eroded or not recognised due to new soil formation. The most significant changes took place during the first rainy season when the relief of the tsunami deposits was levelled; moderate sediment redeposition took place, and fine surface sediments were washed away, which frequently left a residual layer of coarse sand and gravel. The fast recovery of new plant cover stabilised the tsunami deposits and protected them against further remobilisation during the subsequent years. After five rainy seasons, tsunami deposits with a thickness of at least a few centimetres were relatively well preserved; however, their internal structures were often significantly blurred by roots and animal bioturbation. Moreover, soil formation within the deposits caused alterations, and in the case of thin layers, it was not possible to recognise them anymore. Tsunami boulders were only slightly weathered but not moved. Among the various factors influencing the preservation potential, the thickness of the original tsunami deposits is the most important. A comparison between the first post-tsunami survey and the preserved record suggests that tsunamis with a run-up smaller than three metres are not likely to be preserved; for larger tsunamis, only about 50% of their inundation area is likely to be presented by the preserved extent of the tsunami deposits. Any modelling of paleotsunamis from their deposits must take into account post-depositional changes.  相似文献   

18.
  相似文献   

19.
The National Geophysical Data Center and co-located World Data Center for Geophysics and Marine Geology provide integrated access to historical tsunami event, deposit, and proxy data. Historical events are important for understanding the frequency and intensity of relatively recent tsunamis. Deposit data collected during post-tsunami field surveys provide information on tsunami erosion, sedimentation, flow depths, inundation, and run-up. Deposit data from prehistoric tsunami events extend the record to pre-recorded times, constrain tsunami recurrence intervals, and estimate the minimum magnitude of tsunami inundation. Proxies indicate that an event capable of producing a tsunami occurred, but are not direct evidence of a tsunami. All of these data are used to develop tsunami hazard assessments, provide guidance to warning centers, validate models, inform community preparedness efforts, and educate the public about tsunami risks.  相似文献   

20.
Sediment core and trench data from a coastal lagoon on the West Coast of the South Island, New Zealand are used to investigate evidence for co-seismic subsidence and associated tsunami inundation. Physical data are used to document a salt marsh soil buried  80 cm below the modern sediment surface that is locally covered by a gravelly sand bed. The sediment record also contains geochemical and biological (diatom and foram) evidence for abrupt changes in salinity of lagoon waters that link to subsidence, tsunami flooding and to the open versus closed state of the lagoon tidal entrance. At the local scale, these relationships allow for separation of tsunami evidence from other agents of environmental change in the lagoon. We also propose a conceptual connection between these local changes and regional drivers of landscape development, most notably major earthquakes and resultant pulses in sediment supply to the coast.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号