首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 32 毫秒
1.
Analysis of LiDAR-derived imagery led to the discovery of more than 330 pre-Holocene to recent landslides in Southern Flanders (4850 km2). The morphology of three landslides, including the 266.5 ha deep-seated gravitational slope deformation in Alden Biesen, was investigated in more detail. The analysis of the morphological and topographical characteristics (width–length relation, frequency–area distribution and topographical threshold) of the landslides revealed important differences compared to the characteristics reported in other landslide studies, and helped understanding possible landslide triggering mechanisms. Especially the possibility of a seismic origin of the landslides was investigated. Finally, a heuristic model for region-wide landslide susceptibility mapping was successfully tested. The susceptibility model and map allow prediction of future landslide locations and contribute to better understanding the role of individual causal factors on landslide location and spatial density. The results suggest that landslides on low-gradient, soil-mantled hills are a more important contributor to landscape evolution of hilly areas than was hitherto thought. The morphology of all hilly regions of Flanders is clearly marked by landslide processes and higher landslide densities often coincide with the presence of quaternary active faults. This study further shows that high-resolution topographical data such as LiDAR significantly contributes to a better detection of old, previously unknown landslides.  相似文献   

2.
This study quantified the relationship among deep-seated gravitational slope deformations (DGSDs), landslides, and river rejuvenation in the upper reaches of the Kumano River in the Kii Mountains of Japan, an area of frequent bedrock landslides. River profiles and hillslope landforms were examined, and high-resolution digital elevation models (DEMs) were used to identify DGSDs and landslides. Many of the deep-seated landslides were associated with rainstorms in 1889 and 2011. Landslide volumes were related to landslide areas on the basis of 52 deep-seated landslides that failed during the 2011 rainfall, providing basic data for landscape denudation and sediment yield. River rejuvenation occurred stepwise, incising moderate relief paleosurfaces and forming two series of knickpoints and V-shaped inner gorges that are up to 400-m deep. More than 65% of DGSDs and 75% of the landslides were located in association with the incised inner gorges along the peripheries of the paleosurfaces or were entirely contained within the inner gorges. DGSDs and landslides associated with the incised inner valley slopes tended to be larger than those developed within the paleosurfaces and may be long-term transient hillslope responses to river incision. Hillslope undercutting caused by rejuvenated river incision may play an important role in long-term slope stability and distribution of mass movements, and could serve as an indicator of landslide hazard.  相似文献   

3.
The objective of this study is to map landslide susceptibility in Zigui segment of the Yangtze Three Gorges area that is known as one of the most landslide-prone areas in China by using data from light detection and ranging (LiDAR) and digital mapping camera (DMC). The likelihood ratio (LR) and logistic regression model (LRM) were used in this study. The work is divided into three phases. The first phase consists of data processing and analysis. In this phase, LiDAR and DMC data and geological maps were processed, and the landslide-controlling factors were derived such as landslide density, digital elevation model (DEM), slope angle, aspect, lithology, land use and distance from drainage. Among these, the landslide inventories, land use and drainage were constructed with both LiDAR and DMC data; DEM, slope angle and aspect were constructed with LiDAR data; lithology was taken from the 1:250,000 scale geological maps. The second phase is the logistic regression analysis. In this phase, the LR was applied to find the correlation between the landslide locations and the landslide-controlling factors, whereas the LRM was used to predict the occurrence of landslides based on six factors. To calculate the coefficients of LRM, 13,290,553 pixels was used, 29.5 % of the total pixels. The logical regression coefficients of landslide-controlling factors were obtained by logical regression analysis with SPSS 17.0 software. The accuracy of the LRM was 88.8 % on the whole. The third phase is landslide susceptibility mapping and verification. The mapping result was verified using the landslide location data, and 64.4 % landslide pixels distributed in “extremely high” zone and “high” zone; in addition, verification was performed using a success rate curve. The verification result show clearly that landslide susceptibility zones were in close agreement with actual landslide areas in the field. It is also shown that the factors that were applied in this study are appropriate; lithology, elevation and distance from drainage are primary factors for the landslide susceptibility mapping in the area, while slope angle, aspect and land use are secondary.  相似文献   

4.
Devrek town with increasing population is located in a hillslope area where some landslides exist. Therefore, landslide susceptibility map of the area is required. The purpose of this study was to generate a landslide susceptibility map using a bivariate statistical index and evaluate and compare the results of the statistical analysis conducted with three different approaches in seed cell concept resulting in different data sets in Geographical Information Systems (GIS) based landslide susceptibility mapping applied to the Devrek region. The data sets are created from the seed cells of (a) crowns and flanks, (b) only crowns, and (c) only flanks of the landslides by using ten different causative parameters of the study area. To increase the data dependency of the analysis, all parameter maps are classified into equal frequency classes based directly on the percentile divisions of each corresponding seed cell data set. The resultant maps of the landslide susceptibility analysis indicate that all data sets produce fairly acceptable results. In each data set analysis, elevation, lithology, slope, aspect, and drainage density parameters are found to be the most contributing factors in landslide occurrences. The results of the three data sets are compared using Seed Cell Area Indexes (SCAI). This comparison shows that the crown data set produces the most accurate and successful landslide susceptibility map of the study area.  相似文献   

5.
2008年汶川地震滑坡详细编目及其空间分布规律分析   总被引：3，自引：0，他引：3  
最新研究成果表明, 2008年5月12日汶川MS 8.0级地震触发了超过197000处滑坡。首先,基于GIS与遥感技术构建了汶川地震滑坡的3类编目图,分别为单体滑坡面分布数据、滑坡中心点位置和滑坡后壁点位置。构建方法为基于地震前后高分辨率遥感影像的目视解译方法,区分单体滑坡并圈定其边界,对滑坡后壁进行识别与定点,并开展了部分滑坡的野外验证工作。这些滑坡分布在一个面积大约为110000km2的区域内,滑坡总面积约为1160km2。选择一个面积约为44031km2的区域作为研究区,区内滑坡数量为196007个,滑坡面积为1150.622km2,这是最详细完整的汶川地震滑坡编录成果,也是单次地震事件触发滑坡最多的记录。其次,开展研究区内的地震滑坡空间分布规律的研究。基于滑坡面与滑坡中心点分别构建滑坡空间分布面积密度图与点密度图,结果表明:滑坡多沿着映秀北川断裂分布,多发生在断裂的上盘。滑坡的高密度区位于映秀北川同震地表破裂的南西段(映秀镇与北川县之间)的上盘区域,这一区域恰对应着逆冲分量为主的断裂上盘,表明逆冲断裂对上盘区域发生滑坡的极强烈的控制作用,而该区域正是形变最大的区域,因此说明是地震滑坡发生的强烈控制作用。基于滑坡面密度(LAP)、滑坡中心点密度(LCND)与滑坡后壁点密度(LTND)这3个衡量指标,使用统计分析方法,评价了汶川地震滑坡与地震参数、地质参数、地形参数的关系。结果表明:LAP、LCND与LTND这3个衡量指标与坡度、地震烈度与PGA存在明显的正相关关系; 与距离震中、距离映秀北川同震地表破裂存在负相关关系; 斜坡曲率越接近0,滑坡越不易发生; LAP、LCND与LTND的高值高程区间为1200～3000m; 滑坡发生的优势坡向为E、SE、S方向; 滑坡发育的易发岩性为砂岩与粉砂岩(Z)、花岗岩; 滑坡与坡位的相关关系不太明显。统计结果还表明LCND与LTND两个衡量指标的差异对地震与地质因子不敏感,而对地形因子较敏感。最后将本文的统计结果与以往的汶川地震滑坡空间分布规律统计成果进行了一些对比,对比结果表明,对于某些因子,如高程、岩性、距离震中、距离映秀北川断裂的统计分析结果,采用不完整的滑坡分布数据或点数据,与采用较完整的滑坡分布面数据会有一定的差异,这种差异并未出现在针对坡度与坡向等因子的统计对比结果中。总之,作者认为一个完备、详细的地震滑坡分布面要素编目图是地震滑坡空间分布规律定量分析、危险性定量分析与滑坡控制的地震区地貌演化研究的重要基础,否则,与实际情况相比,得到统计结果会有一定的偏差,本文的研究成果与以往成果的对比结果证明了这一点。  相似文献   

6.
As a result of industrialization, throughout the world, cities have been growing rapidly for the last century. One typical example of these growing cities is Istanbul, the population of which is over 10 million. Due to rapid urbanization, new areas suitable for settlement and engineering structures are necessary. The Cekmece area located west of the Istanbul metropolitan area is studied, because the landslide activity is extensive in this area. The purpose of this study is to develop a model that can be used to characterize landslide susceptibility in map form using logistic regression analysis of an extensive landslide database. A database of landslide activity was constructed using both aerial-photography and field studies. About 19.2% of the selected study area is covered by deep-seated landslides. The landslides that occur in the area are primarily located in sandstones with interbedded permeable and impermeable layers such as claystone, siltstone and mudstone. About 31.95% of the total landslide area is located at this unit. To apply logistic regression analyses, a data matrix including 37 variables was constructed. The variables used in the forwards stepwise analyses are different measures of slope, aspect, elevation, stream power index (SPI), plan curvature, profile curvature, geology, geomorphology and relative permeability of lithological units. A total of 25 variables were identified as exerting strong influence on landslide occurrence, and included by the logistic regression equation. Wald statistics values indicate that lithology, SPI and slope are more important than the other parameters in the equation. Beta coefficients of the 25 variables included the logistic regression equation provide a model for landslide susceptibility in the Cekmece area. This model is used to generate a landslide susceptibility map that correctly classified 83.8% of the landslide-prone areas.  相似文献   

7.
The paper deals with a methodology for quantitative landslide hazard and risk assessments over wide-scale areas. The approach was designed to fulfil the following requirements: (1) rapid investigation of large study areas; (2) use of elementary information, in order to satisfy the first requirement and to ensure validation, repetition and real time updating of the assessments every time new data are available; (3) computation of the landslide frequency of occurrence, in order to compare objectively different hazard conditions and to minimize references to qualitative hazard attributes such as activity states. The idea of multi-temporal analysis set forth by Cardinali et al. (Nat Hazards Earth Syst Sci 2:57–72, 2002), has been stressed here to compute average recurrence time for individual landslides and to forecast their behaviour within reference time periods. The method is based on the observation of the landslide activity through aerial-photo surveys carried out in several time steps. The output is given by a landslide hazard map showing the mean return period of landslides reactivation. Assessing the hazard in a quantitative way allows for estimating quantitatively the risk as well; thus, the probability of the exposed elements (such as people and real estates) to suffer damages due to the occurrence of landslides can be calculated. The methodology here presented is illustrated with reference to a sample area in Central Italy (Umbria region), for which both the landslide hazard and risk for the human life are analysed and computed. Results show the powerful quantitative approach for assessing the exposure of human activities to the landslide threat for a best choice of the countermeasures needed to mitigate the risk.An erratum to this article can be found at  相似文献   

8.
In the early morning of September 6th, 2018, an intense earthquake struck Hokkaido Iburi-Tobu area. By this earthquake, many landslides occurred and claimed 36 lives. The landslide numbers reached 6,000 and mostly they are shallow landslides moving down of the air-fall pumice layer from Tarumai volcano which erupted ca. 9,000 years ago. However, southeast of the area, deep-seated landslides of dip-slipping type are also found.  相似文献   

9.
2017年8月8日九寨沟MS7.0地震诱发了数以千计的崩滑体,产生的大量松散固体碎屑在降雨作用下极易启动转化为新的滑坡或泥石流形成次生灾害,因此对九寨沟景区进行滑坡易发性评价尤为必要。基于震前、震后高精度遥感影像对比分析结合现场调查,共获取1047处滑坡,总面积为3.88 km2。在分析滑坡发育分布与影响因素关系的基础上,本文选取了构造因子、地形因子、地质因子及其他因子等9个指标,采用确定性系数(CF)模型、逻辑回归(Logistic)模型以及两种模型耦合分析进行滑坡易发性评价。研究结果表明,坡度、坡向、高程和地层岩性是影响滑坡分布的主要因子;研究区被划分为低易发区(60.72%)、中度易发区(24.18%)、高易发区(9.89%)和极高易发区(5.21%),高-极高易发区基本沿沟谷分布,面积为99 km2,其中熊猫海、老虎海周边均为滑坡极高易发区;采用耦合模型比单一模型评价结果更加合理,其结果可作为景区滑坡防治和分段分时开放的参考依据。  相似文献   

10.
晚更新世以来,特别是全新世以来,黄土高原西北部发育了多期次的滑坡事件。临夏盆地巴谢河流域较好地保留了多期次滑坡的遗存,有研究历史滑坡发育规律的良好素材。文章通过详细的野外调查,初步厘清了滑坡空间分布及新老滑坡相互叠置关系,总结得到本地区滑坡的四种发展类型:压裂型深层黄土-泥岩滑坡、滑移型深层黄土-泥岩滑坡、蠕变型中浅层黄土-泥岩滑坡和塌滑型黄土滑坡。不同时期发育的滑坡在野外呈现明显不同的特征:发育于晚更新世的古滑坡有圈椅状的地形和高陡的后缘陡壁,滑坡堆积体已固结,堆积体表面冲沟发育;发育于全新世早期的老滑坡除了具有圈椅状地形和高陡后壁外,堆积体较为松散,堆积平台形态较为完整;发育于全新世晚期的新滑坡则保留了更多的滑坡特征,可见滑坡后缘和侧缘裂缝。巴谢河流域滑坡大多有多次滑动的迹象,不同期次的滑坡相互重叠,在同一范围发生多次滑动,形成多级滑坡堆积平台。滑坡埋压动植物、滑坡洼地短期水体沉积物等有着明显的滑坡指示意义。通过采集此类样品,利用14C和光释光等测年手段,获取了本地区一系列滑坡事件的年龄。对测年数据进行统计分析,得到巴谢河流域晚更新世以来的五个滑坡高发时段,分别为100~63 kaBP、45.2~41.5 kaBP、33.3~28.2 kaBP、22.5~15.2 kaBP和10.4~0.2 kaBP。以上滑坡高发时段的推断将为认识去环境变迁提供证据。  相似文献   

11.
Landslide inventories are the most important data source for landslide process, susceptibility, hazard, and risk analyses. The objective of this study was to identify an effective method for mapping a landslide inventory for a large study area (19,186 km2) from Light Detection and Ranging (LiDAR) digital terrain model (DTM) derivatives. This inventory should in particular be optimized for statistical susceptibility modeling of earth and debris slides. We compared the mapping of a representative set of landslide bodies with polygons (earth and debris slides, earth flows, complex landslides, and areas with slides) and a substantially complete set of earth and debris slide main scarps with points by visual interpretation of LiDAR DTM derivatives. The effectiveness of the two mapping methods was estimated by evaluating the requirements on an inventory used for statistical susceptibility modeling and their fulfillment by our mapped inventories. The resulting landslide inventories improved the knowledge on landslide events in the study area and outlined the heterogeneity of the study area with respect to landslide susceptibility. The obtained effectiveness estimate demonstrated that none of our mapped inventories are perfect for statistical landslide susceptibility modeling. However, opposed to mapping polygons, mapping earth and debris slides with a point in the main scarp were most effective for statistical susceptibility modeling within large study areas. Therefore, earth and debris slides were mapped with points in the main scarp in entire Lower Austria. The advantages, drawbacks, and effectiveness of landslide mapping on the basis of LiDAR DTM derivatives compared to other imagery and techniques were discussed.  相似文献   

12.
On July 22, 2013, an earthquake of Ms. 6.6 occurred at the junction area of Minxian and Zhangxian counties, Gansu Province, China. This earthquake triggered many landslides of various types, dominated by small-scale soil falls, slides, and topples on loess scarps. There were also a few deep-seated landslides, large-scale soil avalanches, and fissure-developing slopes. In this paper, an inventory of landslides triggered by this event is prepared based on field investigations and visual interpretation of high-resolution satellite images. The spatial distribution of the landslides is then analyzed. The inventory indicates that at least 2330 landslides were triggered by the earthquake. A correlation statistics of the landslides with topographic, geologic, and earthquake factors is performed based on the GIS platform. The results show that the largest number of landslides and the highest landslide density are at 2400 m–2600 m of absolute elevation, and 200 m–300 m of relative elevation, respectively. The landslide density does not always increase with slope gradient as previously suggested. The slopes most prone to landslides are in S, SW, W, and NW directions. Concave slopes register higher landslide density and larger number of landslides than convex slopes. The largest number of landslides occurs on topographic position with middle slopes, whereas the highest landslide density corresponds to valleys and lower slopes. The underlying bedrocks consisting of conglomerate and sandstone of Lower Paleogene (Eb) register both the largest number and area of landslides and the highest landslide number and area density values. Correlations of landslide number and landslide density with perpendicular- and along-strike distance from the epicenter show an obvious spatial intensifying character of the co-seismic landslides. The spatial pattern of the co-seismic landslides is strongly controlled by a branch of the Lintan-Dangchang fault, which indicates the effect of seismogenic fault on co-seismic landslides. In addition, the area affected by landslides related to the earthquake is compared to the relationship of “area affected by landslides vs. earthquake magnitude” constructed based on earthquakes worldwide, and it is shown that the area affected by landslides triggered by the Minxian–Zhangxian earthquake is larger than that of almost all other events with similar magnitudes.  相似文献   

13.
Global climate change has increased the frequency of abnormally high rainfall; such high rainfall events in recent years have occurred in the mountainous areas of Taiwan. This study identifies historical earthquake- and typhoon-induced landslide dam formations in Taiwan along with the geomorphic characteristics of the landslides. Two separate groups of landslides are examined which are classified as those that were dammed by river water and those that were not. Our methodology applies spatial analysis using geographic information system (GIS) and models the geomorphic features with 20?×?20 m digital terrain mapping. The Spot 6 satellite images after Typhoon Morakot were used for an interpretation of the landslide areas. The multivariate statistical analysis is also used to find which major factors contribute to the formation of a landslide dam. The objective is to identify the possible locations of landslide dams by the geomorphic features of landslide-prone slopes. The selected nine geomorphic features include landslide area, slope, aspect, length, width, elevation change, runout distance, average landslide elevation, and river width. Our four geomorphic indexes include stream power, form factor, topographic wetness, and elevation–relief ratio. The features of the 28 river-damming landslides and of the 59 non-damming landslides are used for multivariate statistical analysis by Fisher discriminant analysis and logistic regression analysis. The principal component analysis screened out eleven major geomorphic features for landslide area, slope, aspect, elevation change, length, width, runout distance, average elevation, form factor, river width, stream power, and topography wetness. Results show that the correctness by Fisher discriminant analysis was 68.0 % and was 70.8 % by logistic regression analysis. This study suggests that using logistic regression analysis as the assessment model for identifying the potential location of a landslide dam is beneficial. Landslide threshold equations applying the geomorphic features of slope angle, angle of landslide elevation change, and river width (H L/W R) to identify the potential formation of natural dams are proposed for analysis. Disaster prevention and mitigation measures are enhanced when the locations of potential landslide dams are identified; further, in order to benefit such measures, dam volume estimates responsible for breaches are key.  相似文献   

14.
In tropical areas, mass movements are common phenomena, especially during periods of heavy rainfall, which frequently take place in the summer season. These phenomena have caused loss of life and serious damage to infrastructure and properties. The most prominent of these phenomena are landslides that can produce debris flows. Thus, this article aims at determining affected areas using a model to predict landslide prone areas (SHALSTAB) combined with an empirical model designed to define the debris flow travel distance and area of deposition. The methodology of this work consists of the following steps: (a) elaboration of a digital elevation model (DEM), (b) application of the deterministic SHALSTAB model to locate the landslide prone areas, (c) identification of the debris flow travel distance and area of deposition, and (d) mapping of the affected areas (landslides and debris flows). This work was developed in an area in which many mass movements occurred after intense rainfall during the summer season (February 1996) in the state of Rio de Janeiro, southeast Brazil. All of the scars produced by that event were mapped, allowing for validation of the applied models. The model results show that the mapped landslide locations can adequately be simulated by the model.  相似文献   

15.
Chong Xu  Xiwei Xu  Guihua Yu 《Landslides》2013,10(4):421-431
On 14 April 2010 at 07:49 (Beijing time), a catastrophic earthquake with Ms 7.1 struck Yushu County, Qinghai Province, China. A total of 2,036 landslides were interpreted from aerial photographs and satellite images, verified by selected field checking. These landslides cover about a total area of 1.194 km2. The characteristics and failure mechanisms of these landslides are presented in this paper. The spatial distribution of the landslides is evidently strongly controlled by the locations of the main co-seismic surface fault ruptures. The landslides commonly occurred close together. Most of the landslides are small; there were only 275 individual landslide (13.5 % of the total number) surface areas larger than 1,000 m2. The landslides are of various types. They are mainly shallow, disrupted landslides, but also include rock falls, deep-seated landslides, liquefaction-induced landslides, and compound landslides. Four types of factors are identified as contributing to failure along with the strong ground shaking: natural excavation of the toes of slopes, which mean erosion of the base of the slope, surface water infiltration into slopes, co-seismic fault slipping at landslide sites, and delayed occurrence of landslides due to snow melt or rainfall infiltration at sites where slopes were weakened by the co-seismic ground shaking. To analyze the spatial distribution of the landslides, the landslide area percentage (LAP) and landslide number density (LND) were compared with peak ground acceleration (PGA), distance from co-seismic main surface fault ruptures, elevation, slope gradient, slope aspect, and lithology. The results show landslide occurrence is strongly controlled by proximity to the main surface fault ruptures, with most landslides occurring within 2.5 km of such ruptures. There is no evident correlation between landslide occurrences and PGA. Both LAP and LND have strongly positive correlations with slope gradient, and additionally, sites at elevations between 3,800 and 4,000 m are relatively susceptible to landslide occurrence; as are slopes with northeast, east, and southeast slope aspects. Q4 al-pl, N, and T3 kn 1 have more concentrated landslide activity than others. This paper provides a detailed inventory map of landslides triggered by the 2010 Yushu earthquake for future seismic landslide hazard analysis and also provides a study case of characteristics, failure mechanisms, and spatial distribution of landslides triggered by slipping-fault generated earthquake on a plateau.  相似文献   

16.
Light detection and ranging (LIDAR) is a remote sensing technique that uses light, often using pulses from a laser to measure the distance to a target. Both terrestrial- and airborne-based LIDAR techniques have been frequently used to map landslides. Airborne LIDAR has the advantage of identifying large scarps of landslides covered by tree canopies and is widely applied in identifying historical and current active landslides hidden in forested areas. However, because landslides naturally have relatively small vertical surface deformation in the foot area, it is practically difficult to identify the margins of landslide foot area with the limited spatial resolution (few decimeters) of airborne LIDAR. Alternatively, ground-based LIDAR can achieve resolution of several centimeters and also has the advantages of being portable, repeatable, and less costly. Thus, ground-based LIDAR can be used to identify small deformations in landslide foot areas by differencing repeated terrestrial laser scanning surveys. This study demonstrates a method of identifying the superficial boundaries as well as the bottom boundary (sliding plane) of an active landslide in National Rainforest Park, Puerto Rico, USA, using the combination of ground-based and airborne LIDAR data. The method of combining terrestrial and airborne LIDAR data can be used to study landslides in other regions. This study also indicates that intensity and density of laser point clouds are remarkably useful in identifying superficial boundaries of landslides.  相似文献   

17.
  相似文献   

18.
2010年4月14日07时49分(北京时间),青海省玉树县发生了Ms7.1级大地震。作者基于高分辨率遥感影像解译与现场调查验证的方法,圈定了2036处本次地震诱发滑坡。这些滑坡受地震地表破裂控制强烈,规模相对较小,常常密集成片分布。滑坡类型多样,以崩塌型滑坡为主,还包括滑动型、流滑型、碎屑流型、复合型等类型的滑坡。本文基于地理信息系统(GIS)与遥感(RS)技术,应用逻辑回归模型开展玉树地震滑坡危险性评价,并对结果合理性进行检验。应用GIS技术建立玉树地震滑坡灾害及相关滑坡影响因子空间数据库,选择高程、斜坡坡度、斜坡坡向、斜坡曲率、与水系距离、坡位、断裂、地层岩性、归一化植被指数(NDVI)、公路、同震地表破裂、地震动峰值加速度(PGA)共12个因子作为玉树地震滑坡影响因子,在GIS平台下将这些因子专题图层栅格化。应用逻辑回归模型得到每个因子分级的回归系数,然后建立滑坡危险性指数分布图。利用玉树地震滑坡空间分布图对滑坡危险性指数图进行检验,正确率达到83.21%。滑坡危险性分级结果表明,在占研究区总面积4.97%的"很高危险度"的较小范围内,实际发育滑坡数量为766个,占总滑坡面积的比例高达37.62%,表明地震滑坡危险性评价结果良好。不同危险性级别的滑坡点密度统计结果表明,滑坡点密度随着危险性级别的升高而非常迅速的升高。  相似文献   

19.
The purpose of this study was to detect shallow landslides using hillshade maps derived from light detection and ranging (LiDAR)-based digital elevation model (DEM) derivatives. The landslide susceptibility mapping used an artificial neural network (ANN) approach and backpropagation method that was tested in the northern portion of the Cuyahoga Valley National Park (CVNP) located in northeast Ohio. The relationship between landslides and predictor attributes, which describe landform classes using slope, profile and plan curvatures, upslope drainage area, annual solar radiation, and wetness index, was extracted from LiDAR-based DEM using geographic information system (GIS). The approach presented in this paper required a training study area for the development of the susceptibility model and a validation study area to test the model. The results from the validation showed that within the very high susceptibility class, a total of 42.6 % of known landslides that were associated with 1.56 % of total area were correctly predicted. In contrast, the very low susceptibility class that represented 82.68 % of the total area was associated with 1.20 % of known landslides. The results suggest that the majority of the known landslides occur within a small portion of the study area, consistent with field investigation and other studies. Sample probabilistic maps of landslide susceptibility potential and other products from this approach are summarized and presented for visualization to help park officials in effective management and planning.  相似文献   

20.
Amending landslides inventories is immensely important to policy and decision makers alike. Sliding creates geometric shapes on the Earth’s surface. This study presents the utilization of LiDAR high-resolution digital elevation model (DEM) in the Alborz Mountains, Iran to refurbish the existing landslide inventory dataset by implementing the proposed algorithm. The method consists of the automated derivation of landslide geometry (length, width, and area) followed by classification of landslide types considering length, width and flow direction. This study has used the trapezoidal rule for numerical integration to develop the proposed algorithm. The landslides were then classified into four types (very long, long, very wide, and wide) based on slope, length, and width. This geometric classification of landslides is based on the geographical coordinates, slope angle (θ), length (L), and width (W), and further failure flow direction. A total of 95 landslides were updated from the existing inventory database. The proposed method was verified and evaluated by field observations; and 14 samples were tested to determine the relative error. The results demonstrated that the mean percentage relative error is 0.496% in length and width and 0.008% in area, related to the GIS analysis. The accuracy performance of determining the landslide’s type is 92%. The purposefulness of this algorithm is to increase the accuracy performance of landslides geometry analysis and automated measurements associated with the usual GIS platforms such as ArcGIS.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号