共查询到20条相似文献，搜索用时 62 毫秒
1.
2.
Sarfraz KHAN Umair Bin NISAR Khawar A. AHMED Muhammad WASEEM Waqas AHMED 《《地质学报》英文版》2018,92(4):1544-1557
A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods. 相似文献
3.
Omar Mohamed Hassan Al Mahdy Mohamed Salah Sedek 《Arabian Journal of Geosciences》2013,6(6):1769-1797
The main objective of this paper was the characterization of the reservoir (Abu Roash G dolomite) in terms of acoustic impedance from surface seismic data complemented by available well logs. To reach our target, a two-step procedure was followed: first, identification of the reservoir signatures using synthetic seismogram using Strata program in Hampson–Russell software and second, applying inversion technique to the post-stack seismic data using Strata program in Hampson–Russell software to obtain acoustic impedance profiles and maps. This procedure was applied to 12 3D seismic lines (six cross-lines, and six in-lines) from Horus field in Western Desert in Egypt after converting them from analog state to SEGY format by vectorization. Five wells had been used in this study. The outcome of this paper is an improved subsurface image of seismic data and achieving the reservoir characterization in a good way. 相似文献
4.
5.
一体化地质建模在新近系礁灰岩储层定量表征中的应用 总被引：3，自引：1，他引：2
以LH油田三维地质建模为实例,针对礁灰岩储层内部结构复杂的情况,提出了一种综合应用地震、测井及地质资料进行礁灰岩储层研究和地质建模的方法。LH油田主要含油层段为中新统珠江组礁灰岩,储层为台地边缘生物礁相,储层内部结构复杂。以井震资料为基础,以生物礁沉积过程和成岩作用为指导,对礁体内部结构进行了分析,预测了主力油层内部的差物性层空间展布。在地质模式、井点信息和地震属性约束下,采用随机模拟的手段,建立了地质模型,实现了多学科综合的储层定量表征,对无井区储层特征进行了预测,为开发方案的设计提供了地质依据。 相似文献
6.
We present inversion results for a 100 site, broadband magnetotelluric (MT) survey in the Penola Trough, Otway Basin, South Australia. The Penola Trough is host to several petroleum reservoirs and has more recently been a target for unconventional geothermal exploration. We present two interpretations of the MT data. A 1D anisotropic interpretation, where anisotropy is determined within the Otway Basin sequence and basement in the northeastern Penola Trough, fits the impedance tensor well. However, the anisotropy strike is inconsistent with the known orientation of electrically conductive fractures in the Penola Trough. On the other hand, a 3D interpretation, which incorporates lateral variations in resistivity, requires no anisotropy yet it matches the data equally well. Both the 1D and 3D inversions resolve several layers within the Otway Basin sequence, which correspond to stratigraphic units defined in wells and in the coincident Haselgrove–Balnaves 3D seismic survey. These include the Eumeralla and Dilwyn formations, which are poorly resolved in the seismic data. The basin architecture, defined in the 3D inversion, in particular the depth to basement, is consistent with previous interpretations based on seismic reflection data that show that the Otway Basin thins in the northeastern Penola Trough. This does not occur in the anisotropic model. We therefore conclude that the subsurface resistivity appears to be isotropic in the Penola Trough. This contrasts with the anisotropic resistivity structure determined in a previous study in the Koroit region, eastern Otway Basin. The difference in the MT responses between the two regions is supported by resistivity and permeability information from well logs and may reflect differences in the orientation of subsurface fractures, or differences in the present-day stress field, between the two regions. 相似文献
7.
The Early Permian Warchha Sandstone is well preserved in subsurface in the Potwar Basin and the Punjab Plain of Pakistan. However, this succession is only exposed in the Salt Range, and within this region, only a modest number of the many outcrops are of sufficient quality to enable the preparation of lateral and vertical log profiles. From the subsurface, data from five wells drilled in the Salt Range and Potwar Basin have been analysed. Although they are of restricted coverage, these subsurface data — which take the form of gamma ray logs and well cuttings — provide a valuable addition to the outcrop dataset of the Warchha Sandstone as they provide useful information about vertical textural changes, type and thickness of bedding and the nature of sandbody contacts with underlying strata. Overall, the Warchha Sandstone succession is composed of repeated fining-upwards cycles indicative of a meandering fluvial succession. Sub-components of each cycle are themselves classified into six subsurface sedimentary facies. Through comparison with outcropping parts of the succession, the origin and significance of these subsurface facies can be related to specific architectural elements within the meandering fluvial system responsible for generating the Warchha Sandstone succession. 相似文献
8.
Integration of geoelectric and hydrochemical approaches for delineation of groundwater potential zones in alluvial aquifer 
下载免费PDF全文
下载免费PDF全文 Qaisar Mehmood Muhammad Arshad Muhammad Rizwan Shanawar Hamid Waqas Mehmood Muhammad Ansir Muneer Muhammad Irfan Lubna Anjum 《地下水科学与工程》2020,8(4):366-380
Geoelectric and hydrochemical approaches are employed to delineate the ground-water potential zones in District Okara, a part of Bari Doab, Punjab, Pakistan. Sixty-seven VES surveys are conducted with the Electrical Resistivity Meter. The resultant resistivity verses depth model for each site is estimated using computer-based software IX1D. Aquifer thickness maps and interpreted resistivity maps were generated from interpreted VES results. Dar-Zarrouk parameters, transverse resistance (TR), longitudinal conductance (SL) and anisotropy (λ) were also calculated from resistivity data to delineate the potential zones of aquifer. 70% of SL value is ≤3S, 30% of SL value is > 3S. According to SL and TR values, the whole area is divided into three potential zones, high, medium and low potential zones. The spatial distribution maps show that north, south and central parts of study area are marked as good potential aquifer zones. Longitudinal conductance values are further utilized to determine aquifer protective capacity of area. The whole area is characterized by moderate to good and up to some extent very good aquifer protective area on the basis of SL values. The groundwater samples from sixty-seven installed tube wells are collected for hydro-chemical analysis. The electrical conductivity values are determined. Correlation is then developed between the EC (μS/cm) of groundwater samples vs. interpreted aquifer resistivity showing R2 value 0.90. 相似文献
9.
通过中上扬子地区寒武系野外露头实测、踏勘、前人研究成果整理以及盆地腹地露头缺乏地区的钻井资料的分析,研究了中上扬子地区中寒武世的古地理背景。白云岩的成因、平面上以及垂向上的分布特征都受控于古地理。中寒武统整个台地区为局限台地,在台地发育咸化澙湖、潮坪、局限潮下、浅滩等次一级的古地理单元。中寒武统的膏岩与白云岩不同程度互层。向台地内部,滩相发育愈少,咸化澙湖、潮坪以及局限潮下越发育;越往台地的边缘,滩相越发育。研究区中寒武统白云岩按照晶体大小可以分为泥粉晶白云岩和砂糖状白云岩。泥粉晶白云岩为潮坪准同生白云岩,机理为蒸发泵作用,白云化流体来自于澙湖浓缩的海水。砂糖状白云岩绝大多数为回流渗透白云化成因,白云化流体主要来自于蒸发泵机理富余的高镁钙比流体。回流渗透白云化过程缓慢,白云石结晶较好。寒武系岩性在垂向上有很好的叠置关系,反映古地貌随地质时代的变迁。 相似文献
10.
This study is an attempt to clarify the subsurface geological settings at Abu Darag area in the N part of the Gulf of Suez through the analysis of the available seismic data. The time contour maps of three different reflectors (Top Kareem, Within Rudeis and Top Nukhul) present in this area were constructed and several structures were detected. Generally, the area is considered as a tilted fault block dipping in NE-SW direction and it is dissected by different faults. Major and minor NW-SE faults are the strongest trend in the area while other fault trends are with very weak magnitude and limited extent. All these fault trends restrict between them some high and low areas. Also, two geo-seismic sections were built to confirm the structural prospects on Top Nukhul time contour map. 相似文献
11.
Algorithms and software for numerical modeling and inversion of electromagnetic logs in the wells drilled with biopolymer and oil-based mud are developed. The algorithms are based on linearized solutions of the forward and inverse problems of electromagnetic logging and permit fast modeling of induction logs and efficient recovery of electric conductivity around the well. Mathematical modeling is based on numerical-analytical solution of the 2D forward problem taking into account high conductivity contrast between the well and the formation. Linear inversion is based on SVD-decomposition of information matrix. The results of numerical modeling and inversion of synthetic and field logs at the intervals of fluid-saturated terrigenous and carbonate formations drilled using biopolymer and oil-based mud are given. 相似文献
12.
塔里木盆地台盆区广泛发育下寒武统白云岩,厚度大、生储盖条件优越使其具有广阔的勘探前景,而YL6井在中寒武统膏盐岩之下钻揭了一套巨厚大理岩,这对于早寒武世玛东构造带是否为正常沉积的台盆相碳酸盐岩提出了质疑。通过岩心、岩屑薄片、扫描电镜资料明确了塘古坳陷YL6井巨厚大理岩的岩石学特征,根据大理岩变质特征、特征变质矿物的分布以及海绵骨针的发现,结合地震、测井等资料进一步明确了YL6井大理岩的母岩时代及变质成因。研究表明:(1)YL6井大理岩表现为过渡变质特征,大理岩中的特征变质矿物和酸性热液相关矿物证明其为晚期酸性热液活动的变质产物,并非区域变质基底;(2)大理岩中古生物化石以及地震、沉积背景资料表明玛东地区广泛分布正常沉积的下寒武统白云岩,局部因断裂沟通热源导致变质;(3)玛东构造带寒武系盐下石油地质条件优越,具有寻找盐下原生构造油气藏以及岩性—构造复合油气藏的勘探潜力。 相似文献
13.
Ahmed Abd El Naby Wafaa Abd-Elaziz Mohamed Hamed Abdel Aal 《Swiss Journal of Geoscience》2017,110(3):777-791
This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3). 相似文献
14.
Perveiz Khalid Muhammad Irfan Ehsan Sohail Akram Zia Ud Din Shahid Ghazi 《Journal of the Geological Society of India》2018,92(4):465-470
The reservoir character of the Cretaceous sand is evaluated in Lower Indus Basin, Pakistan where water flooding is very common. Thus, prediction of subsurface structure, lithology and reservoir characterization is fundamental for a successful oil or gas discovery. Seismic reflective response is an important tool to detect sub-surface structure. Seismic reflection response is not enough to highlight geological boundaries and fluids in the pore space therefore, the use of integrated approach is vital to map sub-surface heterogeneities with high level of confidence. Based on seismic character and continuity of prominent reflectors four seismic horizons are marked on the seismic sections. All the strata is highly disturbed and distorted with presence of a network of fault bounded horst and graben structures, which indicate that the area was under compressional tectonic regime. These fault bounded geological structure formed structural traps favorable for the accumulation of hydrocarbon. The petrophysical analysis reveals that the Cretaceous sand formation has four types of sand: Sand A, B, C and D with good porosity (15 % average) and low volume of shale. Although complete petroleum system is present with structural traps and reservoir character of sand interval is very good but these sands are highly saturated with water thus are water flooded, which is the main reason of the abundant wells in the study area. 相似文献
15.
Hugo K.H.Olierook Richard Scalzo David Kohn Rohitash Chandra Ehsan Farahbakhsh Chris Clark Steven M.Reddy R.Dietmar Müller 《地学前缘(英文版)》2021,12(1):479-493
Traditional approaches to develop 3D geological models employ a mix of quantitative and qualitative scientific techniques,which do not fully provide quantification of uncertainty in the constructed models and fail to optimally weight geological field observations against constraints from geophysical data.Here,using the Bayesian Obsidian software package,we develop a methodology to fuse lithostratigraphic field observations with aeromagnetic and gravity data to build a 3D model in a small(13.5 km×13.5 km)region of the Gascoyne Province,Western Australia.Our approach is validated by comparing 3D model results to independently-constrained geological maps and cross-sections produced by the Geological Survey of Western Australia.By fusing geological field data with aeromagnetic and gravity surveys,we show that 89%of the modelled region has>95%certainty for a particular geological unit for the given model and data.The boundaries between geological units are characterized by narrow regions with<95%certainty,which are typically 400-1000 m wide at the Earth's surface and 500-2000 m wide at depth.Beyond~4 km depth,the model requires geophysical survey data with longer wavelengths(e.g.,active seismic)to constrain the deeper subsurface.Although Obsidian was originally built for sedimentary basin problems,there is reasonable applicability to deformed terranes such as the Gascoyne Province.Ultimately,modification of the Bayesian engine to incorporate structural data will aid in developing more robust 3D models.Nevertheless,our results show that surface geological observations fused with geophysical survey data can yield reasonable 3D geological models with narrow uncertainty regions at the surface and shallow subsurface,which will be especially valuable for mineral exploration and the development of 3D geological models under cover. 相似文献
16.
Asghar ALI Khaista REHMAN Owais TAYYAB Tahir ZAMAN Mahad JAMEEL Azeem KHAN Rafique AHMAD Muhammad IRFAN 《《地质学报》英文版》2020,94(5):1440-1450
Analysis of the anomalous magnetic mineral intensities and geochemistry for placer gold deposits are presented for those of the Attock area at the confluence of the Indus and Kabul rivers in northwestern Pakistan. Two grids covering an area of 10x18 m2 and 8x10 m2 were analyzed using a G-858 Cesium Vapor Magnetometer. The anomalous zones obtained were plotted on contour maps, 2D and 3D magnetic intensity maps. Based on the magnetic anomalies, grid-1 of the study area was sampled at three different anomalous zones for geochemical analysis. These zones contain gold concentrations, ranging from 2.11 ppm to 6.109 ppm with an average of 4.01 ppm. Increase in gold concentration in the subsurface within the anomalous zones indicates that magnetometer survey followed by a geochemical analysis can potentially narrow down the gold-bearing anomalous zones. 相似文献
17.
Ezzadin N. Baban Bakhtiar Q. Aziz Nawzad H. Aziz 《Arabian Journal of Geosciences》2014,7(6):2279-2291
The study is carried out to detect the subsurface structures that have geological and economic importance by interpreting the available seismic reflection data of an area estimated to be about 1,752 km2. The study comprises of the Kalar–Khanaqin and surrounding area, which is located at Zagros folded zone. Twenty-five seismic sections had been interpreted. The total length of all the seismic lines is about 650.4 km. Interpretation of the seismic data is focused on two reflectors, lower Fars and Jeribe formation. The lower Fars reflector picked at the two-way time ranging from 0.1 to 2.6 second, while the Jeribe reflector picked at the two-way time ranging from 1.0 to 2.7 second. The constructed maps denote to the existence of many closed and nose structures, in addition, to numerous fault types. All these features were detected in the area having the NW–SE trend. The depth of the lower Fars formation is ranging from 100.0 to 4,800.0 m, while the depth of the Jeribe formation is ranging from 1,700.0 to 5,000.0 m. The depth maps for the two formations also refer to the similarity of the major geological structures. These structures appear in both formations with existence of slight variation in dimensions. The closed structure no. (1) is located at the north of the study area. The nose structure no. (2) is located at the south of the area. At the west of the area, the elongated structure no. (3). The longitudinal reveres fault intersects the SW limb of the structure. The SW limb of elongated structure no. (4), intersect by longitudinal reveres fault, is located at the east of the area. There is also the semi-closed structure no. (5), which appears at the west of the area around the Qr-1 well. Most of detected faults are of reverse and thrust types having a variable amount of throws and horizontal displacements. Some seismic sections explained the existence of the decollement surface within lower Fars formation, which caused the thrusting and faulting of the overlaying beds. 相似文献
18.
多点地质统计学是一种建立地质模型的统计学方法,该方法比传统的两点地质统计学更适合河流相沉积体系。本文综合地震、测井、录井及生产资料,绘制了长庆油田苏里格气田苏48区块盒8下段辫状河训练图像,并在此基础上利用多点地质统计学方法,加入三维地震资料作为约束,以水平井整体开发为研究对象,建立了该区的地质模型,优化了水平井整体部署,指导水平井导向。利用多口水平井实钻效果验证了地质模型的精度,以苏19-62井为例得到:录井显示气层钻遇率为78.3%,测井显示气层钻遇率为69%。这与地震反演剖面预测相似,且与实钻效果有很好的对应性。 相似文献
19.
Emmanuel Gringarten 《Mathematical Geosciences》1996,28(7):881-893
Traditional stochastic modeling of fracture networks usually failed because it required unaccessible statistics and may not be able to honor available local data. This paper presents an algorithm for the 3D geometric simulation of fractured reservoirs. It is based on geological rules of fracture propagation and interaction. It is part of a methodology which aims at integrating diverse data about the fracture system in the subsurface. This information can come from well cores and logs, analog outcrops, geomechanical stress studies, seismic surveys; it may be quantitative or qualitative, and have different degrees of reliability. 相似文献
20.
为满足地震勘探报告三维可视化的需要,以Unity3D引擎为开发平台,利用GIS 3D分析及3DS max三维建模,研究应用煤炭地震勘探三维可视化技术,实现三维地质数据体、地质层位(包括断层面)以及复杂地质模型等的三维可视化,实现对三维地质模型的平移、旋转、缩放,以及各种综合立体显示,建立三维环境漫游和三维可视化交互平台,并以动画形式表现出来,形成具有灵活方便使用的可视化系统。 相似文献