共查询到20条相似文献，搜索用时 93 毫秒
1.
离散裂隙随机网络模型中结构面的分布特征仅代表其统计规律,并非地质成因、结构模式、构造形迹的客观反映,以致后续力学计算及渗流模拟结果可信度偏低。针对国家高放废物处置库甘肃北山预选区出露良好的花岗岩体,基于实测结构面统计规律、内在成生关系及水力联系,在前期纯随机模型关键部位修正特征参数,并融入人工辨识的确定结构模式而构建“随机-确定”耦合模型。图形和渗流模拟两种定量检验结果表明：耦合模型结构面数量更接近客观实际,模型准确度提升约48.8%;耦合模型渗流路径与流量较之前更显客观真实,模拟结果与试验数据的接近程度比随机模型大约1/3。另外,不同孔位渗流结果显示：相比于随机结构面,确定性结构面对区域渗流控制作用更加明显,在渗流模拟中扮演更为重要角色。此耦合模型有益于拓宽结构面网络模拟的发展方向。 相似文献
2.
3.
The mechanical behaviour of a rock mass is strongly affected by discontinuities such as faults and joints. In this paper, a damage mechanics theory is proposed which deals with some sets of discontinuities distributed in a rock mass, for example, joint systems. In this theory, the distributed discontinuities are characterized by a second-order symmetric tensor, called the damage tensor. By introducing the damage concept, the deformation and fracturing behaviour of the rock mass can be reated in a framework of continuum mechanics. A numerical procedure is developed in order to implement the damage mechanics model by using the finite element method. The theory and numerical analysis are applied to several laboratory tests and a practical underground opening problem. Numerical results are compared with measured data. 相似文献
4.
岩体结构面优势分组是研究岩体力学性质与水力特性的基础,通常的分析方法是只根据产状进行划分。鉴于结构面其他特征对岩体力学性质的重要影响,考虑结构面倾向、倾角、迹长、张开度、表面形态5个特征参数,提出了基于人工蜂群算法的岩体结构面多参数优势分组方法。以样本总体离差平方和为目标函数,建立岩体结构面多参数优势分组的数学模型,应用人工蜂群优化算法求解,以目标函数值最小时的解作为聚类中心,并自动确定分组边界。对人工生成的结构面数据的计算结果验证了该方法的正确性,该方法的求解精度是令人满意的。最后,将该方法应用于怒江松塔水电站坝址区岩体结构面多参数优势组的划分,得到了较为合理的分组结果,进一步验证了此方法具有较高的运行效率与工程实用性。 相似文献
5.
Evaluating rock mass geometry from photographic images 总被引：4，自引：0，他引：4
G. Crosta 《Rock Mechanics and Rock Engineering》1997,30(1):35-58
Summary The importance of discontinuities in controlling rock mass behaviour in any engineering project involving excavations calls for a sound and spatial characterization of the discontinuity structure present. Such a characterization necessitates field work that requires sufficient rock exposures in order to obtain an adequate number of data, time and considerable cost. Photoanalysis techniques can help in overcoming the above difficulties equally well or better than other techniques. This paper refers to simple photographic techniques and their implementation for computer aided analyses for the characterization of the rock mass fracturing features. In particular attention is focused on scale problems and on reconstruction of fracture density stereoplots on the basis of data collected from one or two images according to different lithologies and outcropping conditions. The methodology for evaluating the volumetric fracture intensity follows in a slightly modified way a technique previously suggested in the literature. Certain reported examples allow to validate the photoanalytical technique used and the proposed method of analysis. Furthermore, analyses on planar density, spacing, frequency, terminations in solid rock or against other discontinuities and spatial correlation have been implemented in a software to yield a more complete rock mass characterization. At the same time input data and analysis results are produced in data files available as input for numerical analyses. 相似文献
6.
Nenad Grujovic Dejan Divac Miroslav Zivkovic Radovan Slavkovic Nikola Milivojevic Vladimir Milivojevic Dragan Rakic 《Acta Geotechnica》2013,8(3):265-278
The mechanical behaviour of a rock mass is described in this paper using a method that combines experimental and numerical techniques. A new discontinuity (joint) constitutive model is proposed based on the non-associative yield law. Constitutive relationships for an anisotropic rock mass are determined by introducing an interaction between sets of discontinuities and the monolith in which they occur. The model is based on the concept that deformation of the monolith and its associated sets of discontinuities are coupled. An experimental investigation of the concrete foundations of the Bogovina Dam on the Crni Timok River in Serbia has been used to verify the presented numerical model. The tests included discontinuity and monolith sample investigations and large-scale field tests. 相似文献
7.
岩体中普遍存在着断层﹑节理和裂隙等结构面,这些结构面的存在和发展对岩体的整体强度﹑变形及稳定性有极大的影响。因此,研究岩体中原生结构面的萌生﹑发展以及贯通演化过程对评估岩体工程安全性和可靠性具有非常重要的理论与现实意义。扩展有限元法（XFEM）作为一种求解不连续问题的有效数值方法,模拟裂隙时独立于网格,因此,在模拟岩体裂隙扩展﹑水力劈裂等方面具有独特优势。针对扩展有限元法的基本理论及其在岩体裂隙扩展模拟中的应用展开了研究,建立了扩展有限元法求解岩体裂隙摩擦接触、岩体裂隙破坏等问题的数值模型,并将计算模型应用于岩质边坡稳定性分析和重力坝坝基断裂破坏等工程问题。 相似文献
8.
This paper proposes a numerical model for jointed rock masses within the 3‐D numerical manifold method (NMM) framework equipped with a customized contact algorithm. The strength of rock sample containing a few sets of discontinuities is first investigated. The results of models with simple geometries are compared with the available analytical solutions to verify the developed computer code, whereas models with complex geometries are simulated to better understand the fundamental behavior and failure mechanism of jointed rock mass. Furthermore, the stability of jointed rock mass in an underground excavation is studied, where rock failure process is determined by the 3‐D NMM simulation. The simulation results provide valuable guidance on excavation process design and stabilization design in rock engineering practice. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
9.
多参数岩体结构面优势分组方法研究 总被引：2，自引：0，他引：2
在岩体力学和水力学分析中,搞清岩体结构面的分布规律是一项重要的基础工作。当岩体结构面的产状一致,而其他性质不一致时,岩体结构面的力学和水力学性质是不同的,而传统的方法仅根据岩体结构面的产状进行分组,这势必存在缺陷。提出了一种基于变尺度混沌优化算法的多参数结构面数据的优势组划分方法,通过度量结构面之间的相似性建立目标函数,运用变尺度混沌优化算法搜索目标函数的最优解来确定聚类中心,可同时考虑结构面的多个参数,把具有相似性质的结构面归并成组。通过计算机模拟的结构面数据验证了此算法的正确性,最后将此算法应用于实际工程中测量的多参数结构面数据的优势组划分,得到了清晰可靠的分组结果。 相似文献
10.
11.
对于涉及需要单独考虑岩体结构面的工程岩体结构分析,采用能反映岩体结构面主要力学特性的合理的本构模型是取得合理解答的关键问题之一。针对在经典连续介质力学理论框架内建立岩体结构面本构模型的缺点,基于岩体结构面的实际受力变形特性,采用直接法建立了一种新型岩体结构面本构模型。所建立的模型依据岩体结构面切向应力变形曲线及剪胀曲线的实际特征,将其分为峰前线性段、峰前非线性段以及峰后软化段,并分别给出了用于描述岩体结构面变形和强度等主要力学特性的数学模型,进而推导建立了结构面各变形阶段的增量型本构模型。最后,编写相关计算程序,采用所建立的新型本构模型以及被广泛采用的Plesha模型对经典的岩体结构面直剪试验成果进行拟合分析。结果表明,所建立的新型本构模型能更为合理的描述岩体结构面的主要力学特性,且模拟能力优于Plesha模型 相似文献
12.
This paper addresses the effects of randomness of initial damage in a rock mass and the critical tensile strain of the rock material on its dynamic responses and damage under explosive loads. A fuzzy definition is proposed to describe the fuzzy nature of failure phenomenon in a rock mass. The initial damage of the rock mass is estimated using the longitudinal and transverse elastic wave velocities. By using statistical analysis, the initial damage of the rock mass is found having the Beta distribution. The statistical estimation of a damage state and properties of randomly damaged rock mass are evaluated by the Rosenbluth's point estimate method. In numerical calculation, an isotropic continuum damage model with the initial damage and the cumulative damage dependent on an equivalent tensile strain is suggested to model the rock mass behavior under blast loads. A Beta distribution is proposed to represent the probabilistic distribution of the damage variable of the rock mass under explosive loads. Several types of membership functions are suggested to represent the fuzziness of material failure. Based on the fuzzy–random probabilistic theory, a model including both the effects of randomness and fuzziness is proposed for the failure analysis of rock mass under explosive loads. The suggested models are coded and linked with an available computer program AUTODYN2D through its user's subroutine capacity. The fuzzy failure probability and dynamic responses of the rock mass are calculated. Numerical results are compared with those obtained from independent field tests. 相似文献
13.
文章通过规则齿形结构面在不同法向应力下的剪切试验,对其力学特性进行了基础性研究,阐述了规则齿形结构面在剪切条件下力学特性的主要特征及其力学特性的主要规律。通过对试验数据的分析,对结构面在剪切力作用下的强度特性以及结构面在剪切条件下的粗糙度特性进行了研究,在此基础上提出了结构面剪切刚度计算模型以及结构面爬坡角与粗糙度系数之间的经验关系,同时对结构面的剪切位移曲线特征进行了描述,并对现象做出了解释。 相似文献
14.
In nature, there exist several forms of anisotropy in rock masses due to the presence of bedding planes, joints, and weak layers. It is well understood that the anisotropic properties of jointed rock masses significantly affect the stability of surface and underground excavations. However, these critical anisotropic characteristics are often ignored in existing uniaxial dynamic failure criteria. This study investigates the effect of a pre-existing persistent joint on the rate-dependent mechanical behaviours of a rock mass using a particle mechanics approach, namely, bonded particle model (BPM), to realistically replicate the mechanical response of the rock mass. Firstly, in order to capture the rate-dependent response of the jointed rock mass, the BPM model is validated using published experimental data. Then, a dynamic strength model is proposed based on the Jaeger criterion and simulation results. To further investigate the dynamic behaviours, the dynamic uniaxial compressive strength (UCS) for anisotropic rock masses with various joint orientations is investigated by subjecting the BPM models to uniaxial compression numerical tests with various strain rate. The proposed dynamic strength model is validated based on numerical simulation results. Finally, the fragmentation characteristics of the jointed rock masses are analysed, which demonstrate that the failure mode affects the dynamic UCS. This is further confirmed by the analysis of the orientations of microscopic cracks generated by the compression loading. 相似文献
15.
提出一种基于凝聚层次法和模糊C均值法的混合聚类法,用于对岩体结构面的优势组划分。该方法将结构面投放到在单位球面上,并使用欧式距离作为极点的相似性度量准则。先剔除结构面数据中的孤值产状,然后用凝聚层次法得到初步聚类结果,并将其作为FCM法的初始聚类中心,最后用FCM法划分优势组。通对人工生成产状样本的分组,验证了该法的正确性。将该方法应用于大藤峡坝址区实测的结构面数据的划分。在实测数据中寻找到两个孤值产状,成功将大藤峡D1y^1-3地层岩体结构面划分为两组,得到了符合实际的分组结果。 相似文献
16.
Practical visualization of rock structure 总被引：12，自引：0，他引：12
Roland Pusch 《Engineering Geology》1998,49(3-4):231-236
The conventionally applied method for visualizing the structure of a rock mass is limited to plotting the orientation of individual discontinuities by using the Schmidt stereographic net. Their spacing is not illustrated and other structural features, such as undulation and twisting, cannot be interpreted from such sterographic views. A new mode of visual presentation of rock structural features of one or several different types in rock volumes of any size that makes all this possible is proposed in the present report. The primary purpose is to quantify, for all elements of a rock mass where the structure has been evaluated by borehole investigations or mapping in the course of underground excavation, the orientation and average spacing of defined discontinuities like hydraulically and mechanically active fractures. These local structural patterns, which are plotted on three of the six faces of cubical boxes with defined edge length and with one edge oriented N−S can be combined by applying the mathematical tool for connecting faces with which certain visualization codes like Alias Sketch are equipped. This combines different local rock structures to form regional patterns that can reveal undulation and twisting and important variations in spacing of major discrete discontinuities. Visualization can be given in true perspective or orthographic form and larger discontinuities that have been identified in the field, such as fracture zones, can be introduced in the model for correlation with smaller features. Furthermore, the stress situation at all sites where rock stress measurements have been made can be visualized in the model in the form of principal planes. The proposed models can be visualized from any “camera angle” and also shown in Quick Time VR form, i.e. as being slowly rotated around any predetermined axis. This facilitates definition and selection of the rock structure, local or regional, for numerical calculations. 相似文献
17.
变形模量作为表征岩体变形特征的重要参数,是岩体工程设计的基础力学参数之一。在综合前人研究的基础上提出了基于三维结构面网络模拟确定岩体变形模量的方法,编制了三维结构面网络模拟及计算RQD值的程序。以西南山区某水电站坝址区岩体为实例,在概率统计各组优势结构面几何要素分布形式的基础上,采用Monte Carlo法生成三维结构面网络模型,据此获得岩体三维RQD值,利用RMR法进行质量评价和变形模量的确定,并与钻孔资料统计法和原位试验结果进行对比分析。结果表明:基于钻孔资料统计的估算结果与原位试验相对误差达31.62%,且其估算值偏低;基于三维结构面网络模拟的估算结果与原位试验相对误差仅为2.56%,估算结果精度较高。该方法考虑了岩体质量的空间各向异性,对岩体的质量评价和参数确定更为合理,研究成果为该工程的优化设计提供了合理的计算参数。 相似文献
18.
19.
针对岩体结构面力学参数的重要性,开展最小二乘法、点群中心法、随机-模糊法、可靠度分析法4种结构面抗剪强度参数线性回归方法的理论对比与分析。在传统点群中心法的基础上,提出求解过程严密、计算精度较高的改进优化算法。为保证可靠度分析法中验算点法参数初始赋值的准确性,提出基于可靠度理论的结构面抗剪强度参数c, 的均值、标准差优化赋值方法。以武隆县鸡尾山滑坡为例,比较不同岩体结构面数据条件下上述4种方法的适用性。结果表明,各方法的适用性与试验数据的离散性及数据量有关;当数据线性理想时,4种方法均可直接用于结构面抗剪强度参数的线性回归分析;当试验数据较离散时,点群中心法已不再适用,可根据工程要求、异常值情况和计算收敛情况选取合适的数据处理方法。 相似文献
20.
松软破碎岩体的复杂力学特性给深部开采工程带来一系列棘手的问题,深入研究破碎岩体峰后力学行为,对于深部巷道围岩稳定性分析及支护结构设计具有重要意义。基于量化GSI围岩评级系统及连续介质理论,建立了考虑围压影响的破碎岩体峰后应变软化力学模型。通过工程应用实例验证了数值模型的可靠性。研究结果表明：通过计算围岩与支护结构相互作用关系可知,理想弹塑性模型和应变软化模型所得计算结果差异较大,采用理想弹塑性模型进行支护设计,可能导致支护结构的安全性偏低,甚至失稳。现场应用结果表明：数值计算结果与现场实际情况吻合;提出的深部破碎岩体应变软化模型能够较为真实地反映破碎岩体的非线性破坏行为,可为硐室围岩稳定性分析及支护结构设计等提供新的思路。 相似文献