首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 314 毫秒
1.
Abstract: Mineral paragenesis of the alteration, ore and gangue minerals of the Lepanto epithermal copper‐gold deposit and the Victoria gold deposit, Mankayan Mineral District, Northern Luzon, Philippines, is discussed. The principal ore minerals of the Lepanto copper‐gold deposit are enargite and luzonite, with significant presence of tennantite‐tetrahedrite, chalcopyrite, sphalerite, galena, native gold/electrum and gold‐silver tellurides. Pervasive alteration zonations are commonly observed from silicification outward to advanced argillic then to propylitic zone. The ore mineralogy of the Lepanto copper‐gold deposit suggests high fS2 in the early stages of mineralization corresponding to the deposition of the enargite‐luzonite‐pyrite assemblage. Subsequent decrease in the fS2 formed the chalcopyrite‐tennantite‐pyrite assemblage. An increase in the fS2 of the fluids with the formation of the covellite‐digenite‐telluride assemblage caused the deposition of native gold/electrum and gold‐silver tellurides. The principal ore minerals of the Victoria gold deposit are sphalerite, galena, chalcopyrite, tetrahedrite and native gold/electrum. The alteration halos are relatively narrow and in an outward sequence from the ore, silica alteration grades to illitic‐argillic alteration, which in turn grades to propylitic alteration. The Victoria gold mineralization has undergone early stages of silica supersaturation leading to quartz deposition. Vigorous boiling increased the pH of the fluids that led to the deposition of sulfides and carbonates. The consequent decrease in H2S precipitated the gold. Gypsum and anhydrite mainly occur as overprints that cut the carbonate‐silica stages. The crosscutting and overprinting relationships of the Victoria quartz‐gold‐base metal veins on the Lepanto copper‐gold veins manifest the late introduction of near neutral pH hydrothermal fluids.  相似文献   

2.
Mineral assemblages and chemical compositions of ore minerals from the Boroo gold deposit in the North Khentei gold belt of Mongolia were studied to characterize the gold mineralization, and to clarify crystallization processes of the ore minerals. The gold deposit consists of low‐grade disseminated and stockwork ores in granite, metasedimentary rocks and diorite dikes. Moderate to high‐grade auriferous quartz vein ores are present in the above lithological units. The ore grades of the former range from about 1 to 3 g/t, and those of the latter from 5 to 10 g/t, or more than 10 g/t Au. The main sulfide minerals in the ores are pyrite and arsenopyrite, both of which are divisible into two different stages (pyrite‐I and pyrite‐II; arsenopyrite‐I and arsenopyrite‐II). Sphalerite, galena, chalcopyrite, and tetrahedrite are minor associated minerals, with trace amounts of bournonite, boulangerite, geerite, alloclasite, native gold, and electrum. The ore minerals in the both types of ores are variable in distribution, abundance and grain size. Four modes of gold occurrence are recognized: (i) “invisible” gold in pyrite and arsenopyrite in the disseminated and stockwork ores, and in auriferous quartz vein ores; (ii) microscopic native gold, 3 to 100 µm in diameter, that occurs as fine grains or as an interstitial phase in sulfides in the disseminated and stockwork ores, and in auriferous quartz vein ores; (iii) visible native gold, up to 1 cm in diameter, in the auriferous quartz vein ores; and (iv) electrum in the auriferous quartz vein ores. The gold mineralization of the disseminated and stockwork ores consists of four stages characterized by the mineral assemblages of: (i) pyrite‐I + arsenopyrite‐I; (ii) pyrite‐II + arsenopyrite‐II; (iii) sphalerite + galena + chalcopyrite + tetrahedrite + bournonite + boulangerite + alloclasite + native gold; and (iv) native gold. In the auriferous quartz vein ores, five mineralization stages are defined by the following mineral assemblages: (i) pyrite‐I; (ii) pyrite‐II + arsenopyrite; (iii) sphalerite + galena + chalcopyrite; (iv) Ag‐rich tetrahedrite‐tennantite + bournonite + geerite + native gold; and (v) electrum. The As–Au relations in pyrite‐II and arsenopyrite suggest that gold detected as invisible gold is mostly attributed to Au+1 in those minerals. By applying the arsenopyrite geothermometer to arsenopyrite‐II in the disseminated and stockwork ores, crystallization temperature and logfs2 are estimated to be 365 to 300 °C and –7.5 to –10.1, respectively.  相似文献   

3.
Interpretation of various exploration data, in particular geochemical prospecting, offers a powerful and rapid assessment of grass-root projects in a green-field terrain. Here, we present an example of the Collins epithermal prospect in Aceh Province, Indonesia. In this area, the Au+ base-metal-bearing sheeted quartz veins (individually mostly 2–4 cm wide), which are controlled by a 250 m wide by 800 m long NNE-trending structural corridor within Paleogene sandstone and volcanic rocks, are the product of two main stages of deposition. Stage I formed veins with a sliver of cryptocrystalline quartz wall zone followed by an inner zone of comb quartz with interstitial rhombic adularia that terminates in open space. Stage I or main-stage sulfide mineralization consisting of early galena + sphalerite and later chalcopyrite occurs with the quartz + adularia. Small amounts of galena also occur in the wall zone. Stage II mineralization brecciated Stage I veins and overprinted them with silicification characterized by vuggy texture. Mineralization associated with this episode consists of earlier chalcopyrite + sphalerite + tennantite–tetrahedrite and later, vug-filling Au–Ag alloy (Ag0.37–0.41Au0.62–0.59). The above mineralized veins are successively flanked by silicic selvages, an illite + chlorite + pyrite ± kaolinite zone and a chlorite + epidote + carbonate + pyrite zone. Local supergene alteration induced replacement of galena by plumbogummite and anglesite and chalcopyrite by covellite. Data from fluid inclusion microthermometry in quartz indicated that the inner zone of Stage I veins formed from fluids with a 2.3 wt% salinity (0.5–3.3 wt% NaCl equivalent), at 174°C (155–211°C). Combining these physico-chemical parameters with the mineral assemblage, the mineralization occurred under a reduced environment. Rock and soil assays indicate that elevated Au concentrations (up to 16.5 ppm over 1 m) occur along northeast-trending zones and show a strong correlation with Pb, while Cu (up to 2.58% over 1 m), Zn, As, Sb, and Mo anomalies lie mostly at the periphery. The high-grade mineralized veins correlate with moderate to high resistivity and chargeability zones, and the pseudosections of such geophysical signals are interpreted as reflecting coalesced or enlarged veins at depth, or inclined veins in other localities. The intermediate sulfidation affinity for Collins points to potential mineralization at depth as well as preservation of Au-rich and sulfide-poor zones in the less eroded areas.  相似文献   

4.
Mineral assemblages, chemical compositions of ore minerals, wall rock alteration and fluid inclusions of the Gatsuurt gold deposit in the North Khentei gold belt of Mongolia were investigated to characterize the gold mineralization, and to clarify the genetic processes of the ore minerals. The gold mineralization of the deposit occurs in separate Central and Main zones, and is characterized by three ore types: (i) low‐grade disseminated and stockwork ores; (ii) moderate‐grade quartz vein ores; and (iii) high‐grade silicified ores, with average Au contents of approximately 1, 3 and 5 g t?1 Au, respectively. The Au‐rich quartz vein and silicified ore mineralization is surrounded by, or is included within, the disseminated and stockwork Au‐mineralization region. The main ore minerals are pyrite (pyrite‐I and pyrite‐II) and arsenopyrite (arsenopyrite‐I and arsenopyrite‐II). Moderate amounts of galena, tetrahedrite‐tennantite, sphalerite and chalcopyrite, and minor jamesonite, bournonite, boulangerite, geocronite, scheelite, geerite, native gold and zircon are associated. Abundances and grain sizes of the ore minerals are variable in ores with different host rocks. Small grains of native gold occur as fillings or at grain boundaries of pyrite, arsenopyrite, sphalerite, galena and tetrahedrite in the disseminated and stockwork ores and silicified ores, whereas visible native gold of variable size occurs in the quartz vein ores. The ore mineralization is associated with sericitic and siliceous alteration. The disseminated and stockwork mineralization is composed of four distinct stages characterized by crystallization of (i) pyrite‐I + arsenopyrite‐I, (ii) pyrite‐II + arsenopyrite‐II, (iii) galena + tetrahedrite + sphalerite + chalcopyrite + jamesonite + bournonite + scheelite, and iv) boulangerite + native gold, respectively. In the quartz vein ores, four crystallization stages are also recognized: (i) pyrite‐I, (ii) pyrite‐II + arsenopyrite + galena + Ag‐rich tetrahedrite‐tennantite + sphalerite + chalcopyrite + bournonite, (iii) geocronite + geerite + native gold, and (iv) native gold. Two mineralization stages in the silicified ores are characterized by (i) pyrite + arsenopyrite + tetrahedrite + chalcopyrite, and (ii) galena + sphalerite + native gold. Quartz in the disseminated and stockwork ores of the Main zone contains CO2‐rich, halite‐bearing aqueous fluid inclusions with homogenization temperatures ranging from 194 to 327°C, whereas quartz in the disseminated and stockwork ores of the Central zone contains CO2‐rich and aqueous fluid inclusions with homogenization temperatures ranging from 254 to 355°C. The textures of the ores, the mineral assemblages present, the mineralization sequences and the fluid inclusion data are consistent with orogenic classification for the Gatsuurt deposit.  相似文献   

5.
The vein system in the Arinem area is a gold‐silver‐base metal deposit of Late Miocene (8.8–9.4 Ma) age located in the southwestern part of Java Island, Indonesia. The mineralization in the area is represented by the Arinem vein with a total length of about 5900 m, with a vertical extent up to 575 m, with other associated veins such as Bantarhuni and Halimun. The Arinem vein is hosted by andesitic tuff, breccia, and lava of the Oligocene–Middle Miocene Jampang Formation (23–11.6 Ma) and overlain unconformably by Pliocene–Pleistocene volcanic rocks composed of andesitic‐basaltic tuff, tuff breccia and lavas. The inferred reserve is approximately 2 million tons at 5.7 g t?1 gold and 41.5 g t?1 silver at a cut‐off of 4 g t?1 Au, which equates to approximately 12.5t of Au and 91.4t of Ag. The ore mineral assemblage of the Arinem vein consists of sphalerite, galena, chalcopyrite, pyrite, marcasite, and arsenopyrite with small amounts of pyrrhotite, argentite, electrum, bornite, hessite, tetradymite, altaite, petzite, stutzite, hematite, enargite, tennantite, chalcocite, and covellite. These ore minerals occur in quartz with colloform, crustiform, comb, vuggy, massive, brecciated, bladed and calcedonic textures and sulfide veins. A pervasive quartz–illite–pyrite alteration zone encloses the quartz and sulfide veins and is associated with veinlets of quartz–calcite–pyrite. This alteration zone is enveloped by smectite–illite–kaolinite–quartz–pyrite alteration, which grades into a chlorite–smectite–kaolinite–calcite–pyrite zone. Early stage mineralization (stage I) of vuggy–massive–banded crystalline quartz‐sulfide was followed by middle stage (stage II) of banded–brecciated–massive sulfide‐quartz and then by last stage (stage III) of massive‐crystalline barren quartz. The temperature of the mineralization, estimated from fluid inclusion microthermometry in quartz ranges from 157 to 325°C, whereas the temperatures indicated by fluid inclusions from sphalerite and calcite range from 153 to 218 and 140 to 217°C, respectively. The mineralizing fluid is dilute, with a salinity <4.3 wt% NaCl equiv. The ore‐mineral assemblage and paragenesis of the Arinem vein is characteristically of a low sulfidation epithermal system with indication of high sulfidation overprinted at stage II. Boiling is probably the main control for the gold solubility and precipitation of gold occurred during cooling in stage I mineralization.  相似文献   

6.
The 7.1 Ma Broken Hills adularia-sericite Au–Ag deposit is currently the only producing rhyolite-hosted epithermal deposit in the Hauraki Goldfield of New Zealand. The opaque minerals include pyrite, electrum, acanthite (Ag2S), sphalerite, and galena, which are common in other adularia-sericite epithermal deposits in the Hauraki Goldfield and elsewhere worldwide. Broken Hills ores also contain the less common minerals aguilarite (Ag4SeS), naumannite (Ag2Se), petrovskaite (AuAgS), uytenbogaardtite (Ag3AuS2), fischesserite (Ag3AuSe2), an unnamed silver chloride (Ag2Cl), and unnamed Ag?±?Au minerals. Uytenbogaardtite and petrovskaite occur with high-fineness electrum. Broken Hills is the only deposit in the Hauraki Goldfield where uytenbogaardtite and petrovskaite have been identified, and these phases appear to have formed predominantly from unmixing of a precursor high-temperature phase under hypogene conditions. Supergene minerals include covellite, chalcocite, Au-rich electrum, barite, and a variety of iron oxyhydroxide minerals. Uytenbogaardtite can form under supergene and hypogene conditions, and textural relationships between uytenbogaardtite and associated high-fineness electrum may be similar in both conditions. Distinguishing the likely environment of formation rests principally on identification of other supergene minerals and documenting their relationships with uytenbogaardtite. The presence of aguilarite, naumannite, petrovskaite, and fischesserite at Broken Hills reflects a Se-rich mineral assemblage. In the Hauraki Goldfield and the western Great Basin, USA, Se-rich minerals are more abundant in provinces that are characterized by bimodal rhyolite–andesite volcanism, but in other epithermal provinces worldwide, the controls on the occurrences of Se-bearing minerals remain poorly constrained, in spite of the unusually high grades associated with many Se-rich epithermal deposits.  相似文献   

7.
Summary The Kassiteres-Sappes district represents a multi-centered, porphyry-epithermal system developed during the Oligocene to Miocene at a composite calc-alkaline to high-K calc-alkaline volcanic edifice. Precious and base metal mineralization postdates the emplacement of dacite and rhyolite porphyries and is partly superimposed on earlier microdiorite-related porphyry-style mineralization exposed at the Koryfes Hill prospect. A second mineralized porphyry-type system genetically related to a dacite porphyry body developed near the St Demetrios deposit. Tellurides occur mainly at the St Barbara prospect and the St Demetrios deposit. Based on petrographic, electron microprobe, and scanning electron microscope analyses, hessite, petzite, sylvanite, altaite, stützite and native tellurium occur in the St Barbara prospect. These tellurium-bearing minerals are hosted in intermediate-sulfidation type veins and accompanied by pyrite, chalcopyrite, tetrahedrite-group minerals, galena and native gold/electrum. The St Demetrios mineralization includes hessite, altaite, stützite, and tetradymite in close spatial relation to a high-sulfidation assemblage composed of enargite, chalcopyrite, goldfieldite, and native gold. Tellurides were deposited at logfTe2 values of −8.5 to −7.1 and logfS2 values of −10.7 to −7.9 (275 °C). The ore systems are characterized by Au, Ag, Te, Bi, and Mo, which suggests a magmatic contribution to the mineralizing fluids. Ore-forming components were likely derived from both the dacite and rhyolite porphyries.  相似文献   

8.
Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te2 values ?9 and at log fS2 ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system.  相似文献   

9.
Bismuth mineralization, including native bismuth, tsumoite (Bi1.99–2.03Te2.00), and Pb-bearing tsumoite (Bi1.56–1.88Pb0.45–0.14)2.00–2.03Te2.00, was identified in the Au-enriched disseminated ore at the Tarn’er massive sulfide deposit formed under the effect of a large diorite intrusion. Native bismuth associated with hessite forms idiomorphic inclusions in chalcopyrite. The assemblage of Pb-bearing tsumoite, hessite, and altaite occurs as angular allotriomorphic-granular inclusions in silicates or at the contact between silicate and sulfide aggregates. Tsumoite in allotriomorphic-granular aggregates with galena, hessite, and sphalerite is devoid of lead. Gold (Au0.65Ag0.35) was identified along with bismuth tellurides. The temperature of contact methamorphism (500–800°C) was estimated from the stability of andalusite, sillimanite, and cordierite. The morphology of the bismuth telluride aggregates in silicates and graphic intergrowth of tsumoite with galena suggest possible crystallization from anatectic melt. The positive correlation between Bi, Te, and Au confirms their probable joint transportation in the melt.  相似文献   

10.
鸡笼山矽卡岩型金铜矿床是长江中下游成矿带典型的矽卡岩矿床,矿体主要赋存于下三叠统大冶组碳酸盐岩与花岗闪长斑岩接触带内。根据野外观察和镜下鉴定,将成矿过程划分为进矽卡岩阶段、退化蚀变阶段、石英-硫化物阶段和碳酸盐阶段,其中石英-硫化物阶段为金和铜的主要成矿阶段。鸡笼山金铜矿床中不同类型矿石的矿相学观察和电子探针微区成分分析(EPMA)表明,金、银主要以自然金、银金矿、碲银矿、硫银铋矿等形式产出,主要载金矿物为黄铜矿和黄铁矿;同时发现鸡笼山金铜矿床中发育大量碲-铋矿物(如辉碲铋矿、针硫铋铅矿等)。成矿流体物理化学性质研究表明,鸡笼山金铜矿床中金银元素在高温热液中主要以氯络合物的形式运移,随着温度降低和流体进一步的演化,金银元素转变为以硫络合物、碲铋化物熔体等形式运移。在石英-硫化物阶段,由于硫化作用与流体的沸腾作用,流体中硫逸度降低,碲逸度升高;当流体处于黄铁矿-磁黄铁矿氧逸度范围、酸碱性呈中性-弱碱性、碲逸度(logf_(Te2))为-10.7~-8.4、硫逸度(logf_(S_2))为-11.4~-10.6时,金、银、铜元素近于同时沉淀,碲、铋和砷元素对金和银元素运移和富集起到了重要作用,最终形成了鸡笼山矽卡岩型金铜矿床。  相似文献   

11.
Summary Several magmatic-hydrothermal systems in northeastern Greece (western Thrace and Limnos Island) are highly enriched in tellurides which, in addition to native gold and electrum, represent major carriers of precious metals in the ore. Deposition near the porphyry-epithermal transition for several systems is indicated by field relations and by the presence of key minerals (Pb- and Ag-rich tellurides, Bi-sulfosalts and Bi-tellurides/tellurosulfides). Hessite, stützite, sylvanite, petzite, coloradoite, altaite, unnamed Ag-sulfotelluride, native tellurium and electrum are abundant in intermediate sulfidation quartz-carbonate veins together with zincian tetrahedrite-group minerals, chalcopyrite and galena. The presence of hessite, goldfieldite, native gold and enargite or famatinite suggests deposition at a high sulfidation state. The main stage of telluride deposition took place at ∼275 °C at log fTe2 values of −8.5 to −7.1 and log fS2 values of −10.8 to −9.0, based on the Fe-content in sphalerite and the sulfide-telluride mineralogy. The close spatial association of telluride mineralization with intrusive centers of intermediate composition, the base metal enrichment and the trace element signature involving Au, Ag, Te, Bi, Sn and Mo suggest that ore-forming components were introduced at the porphyry-epithermal transition. Potential sources of tellurium are the high-K calc-alkaline (western Thrace) to shoshonitic (Limnos) intrusive rocks.  相似文献   

12.
The paper discusses the geology of Zun-Ospa gold deposit, which is situated near the Ospino ophiolitic nappe in the southeastern part of the Eastern Sayan, and the ore composition therein. The deposit is related to the tectonic mélange zone and is characterized by distinct structural control. Three consecutive mineral assemblages formed within a temperature range of 380°–170°C: (i) native gold–quartz–pyrite, (ii) gold–quartz–polysulfide, and (iii) silver–sulfosalt. The ore was deposited from low-concentration (5.2–14.2 wt % NaCl equiv.) solutions without CO2, with the predominance of Mg and Fe chlorides and an admixture of Na and K chlorides. The major ore minerals are pyrite, chalcopyrite, galena, and sphalerite; identified subordinate minerals are pyrrhotite, pentlandite, heazlewoodite, fahlore (tennantite, freibergite), Ni and Ag sulfosalts (ullmannite, miargyrite, polybasite, stephanite), Ag sulfides (mckinstryite, argentite); Au minerals are represented by electrum, kuestelite, and native gold of medium to low fineness. The geological, mineralogical, geochemical, and isotopic characteristics of ore indicate a metamorphic–hydrothermal genesis of mineralization related to the formation of a mélange zone in the duplex strike-slip structure. The sources of ore components are host rock complexes that have been subjected to tectonic deformations, among which rocks of an ophiolitic association predominate, along with fragments of initial hydrothermal–sedimentary ore, granitic, terrigenous, and carbonate rocks. The Late Paleozoic (352 Ma) age of mineralization corresponds to the stage of postcollision shear deformations within the entire Central Asian Foldbelt.  相似文献   

13.
Gold-bearing albite-amphibole-pyroxene rodingites of the Agardag ultramafic massif (southern Tuva, Russia) are confined to the E-W striking serpentinite crush zone. A zone of gold-bearing nephritoids is localized at the contact of rodingites with serpentinites. Optical and scanning electron microscopy, electron probe microanalysis, and fluorescent, chemical, ICP MS, and X-ray phase analyses were applied to study Au-Cu-Ag mineralization in the serpentinites, rodingites, and nephritoids. Copper sulfides, chalcocite and digenite, are present in the serpentinites, whereas gold and silver minerals are absent. Copper impurity is found in antigorite, Cr-spinel, and magnetite (up to 0.1-0.3 wt.%) as well as parkerite (up to 1.2 wt.%) and millerite (up to 7.9 wt.%). A wide variety of native gold and copper minerals has been identified in the rodingites: (1) cuproauride and tetra-auricupride free of or containing silver impurities (0.1 to 1.2 wt.%); (2) electrum of composition Ag0.50-0.49Au0.50-0.51 (650-660%c) intergrown with AuCu, sometimes as exsolution structures; (3) electrum of composition Ag0.70-0.64Au0.30-0.36 (440-510%c), with inclusions of AuCu and copper sulfides (geerite and yarrowite); (4) high-fineness gold (750-990%c) as veinlets in electrum; and (5) native copper. The composition of copper sulfides varies from chalcocite to covellite. Submicron inclusions of hessite Ag2Te were found in chalcocite. The amount of copper, gold, and silver minerals in the nephritoids is much less than that in the rodingites. The nephritoids contain chalcocite, electrum of composition Ag0.64-0.63Au0.36-0.37 (530-540%c), cuproauride, and tetra-auricupride. The detected hypergene minerals are auricuzite, apachite, brochantite, high-fineness gold, native copper, and cuprite. The sequence of mineral formation in the Agardag ore occurrence has been established on the basis of mineral structures and mineral relations in the rodingites and nephritoids. It is proved that Au-Cu-Ag mineralization formed with the participation of Au- and Ag-bearing chloride-free low-sulfur carbon dioxide alkaline fluids in reducing conditions.  相似文献   

14.
北山地区金矿床金的赋存状态和金矿物特征   总被引：5，自引：0，他引：5  
甘肃北山地区金矿床主要有岩浆热液型金矿床和与韧性剪切带有关的金矿床,矿化类型为石英脉型和蚀变岩型。金多呈独立金矿物形式出现,少放许呈分散状;金矿物以银金矿为主,次为自然金,平均成色７７２;金矿物以粒间金、裂隙金、连生金、连生金和包体金等形成嵌布于石英、黄铁矿、方铅矿及闪锌矿等主要载物较为发育。金矿物特征反映出本区金矿床的成矿物质主要来源于变质岩,华力西－印支期中酸性岩浆活动是主要的动力源。  相似文献   

15.
Chemical composition and mode of occurrences of (Au, Ag)Te2 minerals such as calaverite (AuTe2), sylvanite (AuAgTe4) and krennerite ((Au, Ag)Te2) in epithermal gold telluride ores from Suzaki, Kawazu and Teine are examined. In the ores from Suzaki, (Au, Ag)Te2 minerals occur in microbands of tellurides and fine quartz. The minerals in telluride bands change from krennerite, via calaverite‐native tellurium, to sylvanite, in the order of crystallization. A sample from Kawazu contains sylvanite and native tellurium with stutzite, hessite and tetradymite in the coarser gray quartz part. The Teine sample also contains sylvanite and native tellurium with barite and quartz. The peak patterns of XRD of calaverite, krennerite and sylvanite from Suzaki are almost identical to that of JCPDS 43–1472, JCPDS 8–20 and JCPDS 9–477, respectively. The Te, Au, Cu, and Ag contents of calaverite from Suzaki range from 56.4 to 57.9 wt.%, from 41.6 to 42.6 wt.%, from 0.28 to 0.45 wt.% and from 0.14 to 0.31 wt.%, respectively, corresponding to the formula Au0.97Ag0.01Cu0.02Te2. The Te, Au, Ag, and Cu contents of krennerite from Suzaki range from 59.6 to 61.4 wt.%, from 31.3 to 33.6 wt.%, from 4.91 to 6.13 wt.% and from 0.66 to 0.80 wt.%, respectively, corresponding to the formula Au0.71Ag0.22Cu0.05Te2 with Au and Ag ranging from 0.68 to 0.74 and from 0.20 to 0.25, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Suzaki range from 61.5 to 63.4 wt.%, from 24.1 to 27.4 wt.%, from 10.0 to 12.5 wt.% and from 0.00 to 0.12 wt.%, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Kawazu range from 62.7 to 63.3 wt.%, from 23.5 to 24.1 wt.%, from 12.0 to 12.5 wt.% and from 0.09 to 0.16 wt.%, respectively. The Te, Au, Ag, Cu and Fe contents of sylvanite from Teine range from 61.8 to 63.5 wt.%, from 23.6 to 24.7 wt.%, from 11.9 to 13.3 wt.%, from 0.01 to 1.65 wt.% and from 0.00 to 0.02 wt.%, respectively. The average formulae of sylvanite from Suzaki, Kawazu, and Teine are expressed as Au1.06Ag0.94Cu0.02Te4, Au1.00Ag0.95Cu0.02Te4 and Au1.01Ag0.95Cu0.06Te4, respectively. Judging from the mineral assemblages of these ores and other localities, Au–Te mineralization in the Japanese Islands can be divided into four types: native gold–calaverite at Date and Agawa, krennerite(?native tellurium) at Osore‐zan and Mutsu, sylvanite–native tellurium–hessite at Teine, Kawazu, Kobetsuzawa, and Kato, and polyminerallic assemblages at Suzaki and Kushikino. The pH–Eh diagram of aqueous tellurium species and tellurium minerals at 250°C indicates that (Au, Ag)Te2 minerals in epithermal gold telluride mineralization would have been formed under middle to low Eh and acidic (to intermediate) pH conditions. It is possible that dilute tellurium‐containing fluid would scavenge dilute gold.  相似文献   

16.
Abstract. The Yuryang gold deposit, comprising a Te‐bearing Au‐Ag vein mineralization, is located in the Cheonan area of the Republic of Korea. The deposit is hosted in Precambrian gneiss and closely related to pegmatite. The mineralized veins display massive quartz textures, with weak alteration adjacent to the veins. The ore mineralization is simple, with a low Ag/Au ratio of 1.5:1, due to the paucity of Ag‐phases. Ore mineralization took place in two different mineral assemblages with paragenetic time; early Fe‐sulfide mineralization and late Fe‐sulfide and Au‐Te mineralization. The early Fe‐sulfide mineralization (pyrite + sphalerite) occurred typically along the vein margins, and the subsequent Au‐Te mineralization is characterized by fracture fillings of galena, sphalerite, pyrrhotite, Te‐bearing minerals (petzite, altaite, hessite and Bi‐Te mineral) and electrum. Fluid inclusions characteristically contain CO2 and can be classified into four types (Ia, Ib, IIa and IIb) according to the phase behavior. The pressure corrected temperatures (≥500d?C) indicate that the deposit was formed at a distinctively high temperature from fluids with moderate to low salinity (<12 wt% equiv. NaCl) and CH4 (1?22 mole %). The sphalerite geo‐barometry yield an estimated pressure about 3.5 ?2.1 kbar. The dominant ore‐deposition mechanisms were CO2 effervescence and concomitant H2S volatilization, which triggered sulfidation and gold mineralization. The measured and calculated isotopic compositions of fluids (δ18OH2O = 10.3 to 12.4 %o; δDH2O = ‐52 to ‐77 %o) may indicate that the gold deposition originated from S‐type magmatic waters. The physicochemical conditions observed in the Yuryang gold deposit indicate that the Jurassic gold deposits in the Cheonan area, including the Yuryang gold deposit are compatible with deposition of the intrusion‐related Au‐Te veins from deeply sourced fluids generated by the late Jurassic Daebo magmatism.  相似文献   

17.
Bergstöl  S.  Vokes  F. M. 《Mineralium Deposita》1974,9(4):325-337
The Cu-Ag-S minerals, stromeyerite and mckinstryite, have been found for the first time in a stratabound polymetallic pyritic deposit in the Caledonides of central Norway. The surface specimens examined contained approximately 0.5% Ag, 1.8% Cu, 15.0% Zn and over 10 g/t Au and showed the mineral association pyrite, sphalerite, chalcopyrite, galena, tennantite, bornite, Cu-Ag sulphides, covelline, native Au, a Cu-Sn sulphide, and a new mineral of composition Ag5CuTeS2. The Cu-Ag sulphides appear to be replacing preexisting sulphides, with the exception of pyrite and sphalerite. The nature of this replacement is discussed. Analyses, by microprobe, of the Cu-Ag-S phases are reported and compared with published data. The stromeyerite shows an average composition Cu1.01Ag S, the mckinstryite Cu0.77Ag1.19S. Values are reported of the reflectance at 542 nm for both minerals. The data indicate that stromeyerite is optically positive with Rg: 30.7%, Rm: 27.3%, Rp: 25.8% while mckinstryite is negative with Rg: 32.5%, Rm: 31.9%, Rp: 27.6%.  相似文献   

18.
The main Woodlawn ore lens is a polymetallic, massive sulphide deposit’ with pyrite the major constituent, variable sphalerite, galena and chalcopyrite, and minor arsenopyrite, tetrahedrite‐tennantite, pyrrhotite and electrum. The silicate gangue minerals are chlorite, quartz, talc and sericitic mica. Other mineralization in the vicinity consists of footwall copper ore in chlorite schist and several smaller massive sulphide lenses. The predominant country rocks are felsic volcanics and shales, with abundant quartz, chlorite and mica, and talc in mineralized zones.

An important textural feature of the massive ore is the fine compositional banding. Bands, which vary in thickness from a few tens of micrometres to several millimetres, are produced by variations in the sulphide content. Post‐depositional metomorphism and minor fracturing have only slightly modified this banding.

Apart from the major element constituents—Pb, Zn, Fe, Cu and S—the ore is characterized by significant (100–1000 ppm) values for Ag, As, Cd, Mn, Sb and Sn, and lower (1–100 ppm) values of Au, Bi, Co, Ga, Hg, Mo, Ni, Tl. In and Ge. Variations in the base‐metal sulphide content, the gangue mineralogy, and trace elements, are used to separate the orebody into hanging‐wall and footwall zones. The hanging‐wall zone shows a more variable trace element content, with higher Tl, Sn, Ni, Mn, Ge and Sb, but lower Ag, Cd, and Mo, than the footwall zone.

In general style of mineralization, mineralogy, and chemistry, the Woodlawn deposit resembles other volcanogenic massive sulphide deposits in eastern Australia, in New Brunswick in Canada, and the Kuroko deposits of Japan.  相似文献   

19.
Electron probe micro-analysis(EPMA) and scanning electron microscopy(SEM) equipped with energy dispersive spectrometry(EDS) have been used to investigate the principal ore minerals and coexisting metallic mineral inclusions in polished thin sections from the Tiegelongnan deposit, which consists of a high-sulfidation epithermal system(HSES) and a porphyry system(PS). Molybdenite,chalcopyrite, bornite, tennantite, enargite, digenite, anilite, covellite, and tetrahedrite have been identified by EPMA. Intergrowth, cross-cutting and replacement relationships between the metallic minerals suggest that molybdenite formed first(stage 1),followed by chalcopyrite ± bornite ± hematite(stage 2),then bornite ± Cu-sulfides ± Cu-Fe-sulfoarsenides(stage 3),and lastly Cu-Fe-sulfoarsenides ±Cu-sulfides(stage 4). Pyrite is developed throughout all the stages. Droplet-like inclusions of Au-Te minerals commonly occur in tennantite but not in the other major sulfides(molybdenite, chalcopyrite and bornite),implying that tennantite is the most important Au telluride carrier. The pervasive binary equilibrium phases of calaverite and altaite constrain f_(Te2) in the range from ～-6.5 to ～-8 and f_(S2)-11.The intergrowth of bornite and chalcopyrite and the conversion from bornite to digenite suggest fluctuated and relatively low precipitation temperature conditions in the HSES relative to the PS.Contrastingly, the dominance of chalcopyrite in the PS, with minor bornite, suggests relatively high temperature conditions. These new results are important for further understanding the mineral formation processes superimposed by HSES and PS systems.  相似文献   

20.
Mineralogical, fluid inclusion, and geochemical studies of precious metal mineralization within the Baimka trend in the western Chukchi Peninsula have been preformed. Porphyry copper–molybdenum–gold deposits and prospects of the Baimka trend are spatially related to monzonitic rocks of the Early Cretaceous Egdygkych Complex. Four types of precious metal-bearing assemblages have been identified: (1) chalcopyrite + bornite + quartz with high-fineness native gold enclosed in bornite, (2) low-Mn dolomite + quartz + sulfide (chalcopyrite, sphalerite, galena, tennantite-tetrahedrite) ± tourmaline with low-fineness native gold and hessite, (3) rhodochrosite + high-Mn dolomite + quartz + sulfide (chalcopyrite, sphalerite, galena, tennantite- tetrahedrite) with low-fineness native gold, electrum, acanthite, Ag and Au–Ag tellurides, and Ag sulfosalts, and (4) calcite + quartz + sulfide (chalcopyrite, sphalerite, galena) with low-fineness native gold, Ag sulfides and selenides, and Ag-bearing sulfosalts. Study of fluid inclusions from quartz, sphalerite, and fluorite have revealed that hydrothermal ores within the Baimka trend precipitated from fluids with strongly variable salinity at temperatures and pressures ranging from 594 to 104°C and from 1200 to 170 bar, respectively. An indicator of vertical AgPbZn/CuBiMo geochemical zoning is proposed. The value range of this indicator makes it possible to estimate the erosion level of the porphyry–epithermal system. The erosion level of the Baimka deposits and prospects deepens in the following order: Vesenny deposit → Pryamoi prospect → Nakhodka prospect → Peschanka deposit → III Vesenny prospect.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号