首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Whitestone Anorthosite (WSA), located in southern Ontario, underwent granulite facies metamorphism during the Grenville orogeny at 1.16 Ga. During the waning stages of metamorphism fluids infiltrated the outer portions of the anorthosite and promoted the formation of an envelope comprised of upper amphibolite facies mineral assemblages. Also, this envelope corresponds to portions of the anorthosite that underwent deformation related to movement along a high-grade ductile shear zone. Samples from this portion of the anorthosite (the margin) contain CO2-rich inclusions in plagioclase porphyroclasts (relict igneous phenocrysts), matrix plagioclase and garnet. These inclusions have features which normally are interpreted as indicating that they are texturally primary, but they have relatively low CO2 densities (0.61–0.95 g cm-3). Plagioclase from the anorthosite interior contains texturally secondary inclusions with relatively high CO2 densities (generally from 0.99 to 1.10 g cm-3). The high CO2 densities suggest that the inclusions in the plagioclase of the anorthosite core formed prior to inclusions in porphyroclast minerals of the outer portions of the anorthosite, an interpretation that is apparently inconsistent with inclusion textures. This apparent paradox indicates that most fluid inclusions from the anorthosite margin were formed during, or were modified by, the dynamic recrystallization that affected this portion of the WSA. In either case, late formation or modification, the texturally primary fluid inclusions do not contain pristine samples of the peak metamorphic fluid. Furthermore, because shear-related deformation is apparently associated with entrapment of the lowest fluid densities, some strain localization persisted to relatively low temperatures (e.g. less than approximately 500° C). These results constrain a part of the retrograde P–T path for this portion of the Grenville Orogen to temperatures of approximately 400–500° C at pressures of approximately 1–2 kbar.  相似文献   

2.
Abstract: Raman frequency of some materials, including minerals, molecules and ions, shifts systematically with changing pressure and temperature. This property is often used as a pressure gauge in high pressure experiments with the hydrothermal diamond anvil cell (HDAC). Since the system of fluid inclusion is similar to that of HDAC, it can also be used to determine the internal pressure of fluid inclusions. Sphalerite is a common daughter mineral. In this study, the frequency shift of the 350 cm?1 peak of sphalerite has been studied from 296 to 523 K and from 0.07 to 2.00 GPa using the HDAC. The global slope of the isotherms (?n350/?p)T is 0.0048 in the studied pressure range. No significant variation of the slopes with temperature has been observed. The correlation between the frequency shift of the 350 cm?1 peak of sphalerite and pressure and temperature is constrained as P=208.33(?np)350+3.13T?943.75. This relationship may be used to estimate the internal pressure of the sphalerite-bearing fluid inclusions.  相似文献   

3.
The Wulasigou Cu-Pb-Zn deposit,located 15 km northwest of Altay city in Xinjiang,is one of many Cu-Pb-Zn polymetallic deposits in the Devonian Kelan volcanic-sedimentary basin in southern Altaids.Two mineralizing periods can be distinguished:the marine volcanic sedimentary PbZn mineralization period,and the metamorphic hydrothermal Cu mineralization period,which is further divided into an early bedded foliated quartz vein stage(Q1) and a late sulfide-quartz vein stage(Q2) crosscutting the foliation.Four types of fluid inclusions were recognized in the Q1 and Q2 quartz from the east orebodies of the Wulasigou deposit:H_2O-CO_2 inclusions,carbonic fluid inclusions,aqueous fluid inclusions,and daughter mineral-bearing fluid inclusions.Microthermometric studies show that solid CO_2 melting temperatures(T_(m,CO2)) of H_2O-CO_2 inclusions in Ql are from-62.3℃ to-58.5C,clathrate melting temperatures(T_(m,clath)l) are from 0.5 C to 7.5 C,partial homogenization temperatures(T_(h,CO2)) vary from 3.3℃ to 25.9℃(to liquid),and the total homogenization temperatures(T_(h,tot)) vary from 285℃ to 378℃,with the salinities being 4.9%-15.1%NaCl eqv.and the CO_2-phase densities being 0.50-0.86 g/cm~3.H_2O-CO_2 inclusions in Q2 have T_(m,CO_2) from-61.9℃ to-56.9℃,T_(m,clath)from 1.3℃ to 9.5℃,T_(h,CO2) from 3.4℃ to 28.7℃(to liquid),and T_(h,tot) from 242℃ to 388℃,with the salinities being 1.0%-15.5%NaCl eqv.and the CO_2-phase densities being 0.48-0.89 g/cm~3.The minimum trapping pressures of fluid inclusions in Q1 and Q2 are estimated to be 260-360 MPa and180-370 MPa,respectively.The δ~(34)S values of pyrite from the volcanic sedimentary period vary from2.3‰ to 2.8‰(CDT),and those from the sulfide-quartz veins fall in a narrow range of-1.9‰ to 2.6‰(CDT).The δD values of fluid inclusions in Q2 range from-121.0‰ to-100.8‰(SMOW),and theδ~(18)O_(H2O) values calculated from δ~(18)O of quartz range from-0.2‰ to 8.3‰(SMOW).The δD-δ~(18)O_(H2O)data are close to the magmatic and metamorphic fields.The fluid inclusion and stable isotope data documented in this study indicate that the vein-type copper mineralization in the Wulasigou Pb-Zn-Cu deposit took place in an orogenic-metamorphic enviroment.  相似文献   

4.
Fluid inclusions have recorded the history of degassing in basalt. Some fluid inclusions in olivine and pyroxene phenocrysts of basalt were analyzed by micro-thermometry and Raman spectroscopy in this paper. The experimental results showed that many inclusions are present almost in a pure CO2 system. The densities of some CO2 inclusions were computed in terms of Raman spectroscopic characteristics of CO2 Fermi resonance at room temperature. Their densities change over a wide range, but mainly between 0.044 g/cm3 and 0.289 g/cm3. Their micro-thermometric measurements showed that the CO2 inclusions examined reached homogenization between 1145.5℃ and 1265℃ . The mean value of homogenization temperatures of CO2 inclusions in basalts is near 1210℃. The trap pressures (depths) of inclusions were computed with the equation of state and computer program. Distribution of the trap depths makes it know that the degassing of magma can happen over a wide pressure (depth) range, but mainly at the depth of 0.48 km to 3.85 km. This implicates that basalt magma experienced intensive degassing and the CO2 gas reservoir from the basalt magma also may be formed in this range of depths. The results of this study showed that the depth of basalt magma degassing can be forecasted from CO2 fluid inclusions, and it is meaningful for understanding the process of magma degassing and constraining the inorganogenic CO2 gas reservoir.  相似文献   

5.
Raman peaks of various hydrates in the H20-NaCl-CaCl2 system have been previously identified, but a quantitative relationship between the Raman peaks and XNaCl （i.e.,NaCl/ （NaCl＋CaCl2）） has not been established, mainly due to the difficulty to freeze the solutions. This problem was solved by adding alumina powder to the solutions to facilitate nucleation of crystals. Cryogenic （-185℃） Raman spectroscopic studies of alumina-spiced solutions indicate that XNaCl is linearly correlated with the total peak area fraction of hydrohalite. Capsules of solutions made from silica capillary were prepared to simulate fluid inclusions. Most of these artificial fluid inclusions could not be totally frozen even at temperatures as low as -185℃, and the total peak area fraction of hydrohalite is not correlated linearly with XNaCI. However, the degree of deviation （△XNaCl） from the linear correlation established earlier is related to the amount of residual solution, which is reflected by the ratio （r） of the baseline ＂bump＂ area, resulting from the interstitial unfrozen brine near 3435 cm^-1, and the total hydrate peak area between 3350 and 3600 cm^-1. A linear correlation between △XNaCl and r is established to estimate XNaCl from cryogenic Raman spectroscopic analysis for fluid inclusions.  相似文献   

6.
Raman spectroscopy is a powerful method for the determination of CO2 densities in fluid inclusions, especially for those with small size and/or low fluid density. The relationship between CO2 Fermi diad split (Δ, cm−1) and CO2 density (ρ, g/cm3) has been documented by several previous studies. However, significant discrepancies exist among these studies mainly because of inconsistent calibration procedures and lack of measurements for CO2 fluids having densities between 0.21 and 0.75 g/cm3, where liquid and vapor phases coexist near room temperature.In this study, a high-pressure optical cell and fused silica capillary capsules were used to prepare pure CO2 samples with densities between 0.0472 and 1.0060 g/cm3. The measured CO2 Fermi diad splits were calibrated with two well established Raman bands of benzonitrile at 1192.6 and 1598.9 cm−1. The relationship between the CO2 Fermi diad split and density can be represented by: ρ = 47513.64243 − 1374.824414 × Δ + 13.25586152 × Δ2 − 0.04258891551 × Δ3 (r2 = 0.99835, σ = 0.0253 g/cm3), and this relationship was tested by synthetic fluid inclusions and natural CO2-rich fluid inclusions. The effects of temperature and the presence of H2O and CH4 on this relationship were also examined.  相似文献   

7.
The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D2d 12). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of Th, and white quartz veins have 154–312°C of Th. The laser‐Raman test shows that CO2 is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO2, H2O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl?, Na+. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H2O–CO2, low salinity, and H2O–CO2–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.  相似文献   

8.
The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.  相似文献   

9.
Results of study of different types of inclusions in minerals from mantle xenoliths from the Bele pipe basanites are presented. Two groups of inclusions were recognized in the host minerals according to their genesis. The first group includes single, apparently primary, fluid inclusions. They were discovered only in orthopyroxenes and consist of CO2 (95 mol.%) and N2 (5 mol.%). These inclusions had partly leaked. The densities of two least leaked inclusions from different xenoliths are 1.05 and 1.14 g/cm3, and their trapping pressures are estimated at >8.5 and 12 kbar, respectively. The second group includes syngenetic secondary fluid, melt, and crystalline inclusions. In composition the secondary fluid inclusions differ from the primary ones in higher concentrations of N2 (up to 7 mol.%). Their maximum density is 0.57 g/cm3, which corresponds to 2.4–2.6 kbar and 1100–1200 °C (homogenization temperature of secondary melt inclusions). Comparison of data on melt inclusions in xenolith minerals and host-basanite phenocrysts shows that the secondary inclusions in the xenoliths are, most likely, the result of infiltration and partial reaction of basanitic melt with the xenoliths. On the ascent, the basanitic melt vigorously reacted with mantle xenoliths, which led to the appearance of secondary inclusions in nodule minerals at shallow depths and interstitial mineral assemblages in the xenoliths.  相似文献   

10.
The carbon isotopic composition of CO2 inclusions trapped in minerals reflects the origin and evolution of CO2-bearing fluids and melts, and records the multiple-stages carbon geodynamic cycle, as CO2 took part in various geological processes widely. However, the practical method for determination isotope composition of individual CO2 inclusion is still lacking. Developing a microanalytical technique with spatial resolution in micrometers to precisely determinate the δ13C value of individual CO2 inclusion, will make it possible to analyze a tiny portion of a zoning mineral crystal, distinguish the differences in micro-scale, and possible to find many useful information that could not be obtained with the bulk extraction and analysis techniques. In this study, we systematically collected Raman spectra of CO2 standards with different δ13C values (?34.9 ‰ to 3.58 ‰) at 32.0 °C and from ～7.0 MPa to 120.0 MPa, and developed a new procedure to precisely determinate the δ13C value of individual CO2 inclusion. We investigated the relationship among the Raman peak intensity ratio, δ13C value, and CO2 density, and established a calibration model with high accuracy (0.5 ‰?1.5 ‰), sufficient for geological application to distinguish different source of CO2 with varying δ13CO2. As a demonstration, we measured the δ13C values and the density of CO2 inclusions in the growth zones of alkali basalt-hosted corundum megacrysts from Changle, Shandong Province. We found the significant differences of density and δ13C between the CO2 inclusions in the core of corundum and those inclusions in the outer growth zones, the δ13C value decreases from core to rim with decreasing density: δ13C values are from ?7.5 ‰ to ?9.2 ‰ for the inclusions in the core, indicating the corundum core was crystallized from mantle-derived magmas; from ?13.5 ‰ to ?18.5 ‰ for CO2 inclusions in zone 1 and from ?16.5 ‰ to –22.0 ‰ for inclusions in zone 2, indicating the outer zones of corundum grew in a low δ13C value environment, resulted from an infilling of low δ13C value fluid and/or degassing of the ascending basaltic magma.  相似文献   

11.
Fluid inclusions approximated by the system H2O-CO2-NaCl are common in many geologic environments. In order to apply microthermometric data from these inclusions to infer P-T (pressure-temperature) trapping conditions, the composition of the inclusions, including the salinity, must be known. Normally, salinities of aqueous inclusions are determined from ice-melting temperatures obtained during microthermometry. However, when CO2-bearing aqueous fluid inclusions are cooled they often form a hydrate that incorporates H2O into the structure, and salinities estimated from ice-melting temperatures are therefore higher than the actual salinity. A technique that combines data from Raman spectroscopic and microthermometric analyses of individual inclusions was developed to determine the salinity of CO2-bearing aqueous inclusions based on measured clathrate melting temperatures and CO2 pressures obtained from Raman analyses. In this study, the pressure within inclusions was determined using Raman spectroscopy based on the splitting of the Fermi diad of CO2, measured at the clathrate melting temperature. The CO2 densities (and pressures) predicted by the equation developed in this study are in relatively good agreement with previously published equations, except for very low densities and correspondingly low pressures. The combined Raman spectroscopy - microthermometry technique thus provides both the temperature and the pressure in the inclusion at clathrate melting. For inclusions in which the clathrate melts in the presence of CO2 liquid, the salinity can be determined with a precision of a few tenths of a wt% NaCl, whereas for inclusions in which clathrate melts in the presence of CO2 vapor the salinity error may be a few wt% NaCl. Applying the method to synthetic fluid inclusions with known salinity suggests that the technique is valid for determining salinity of H2O-CO2-NaCl fluid inclusions in which clathrate melts in the presence of liquid CO2 only or vapor CO2 only.  相似文献   

12.
We report the first finding of diamond and moissanite in metasedimentary crustal rocks of Pohorje Mountains (Slovenia) in the Austroalpine ultrahigh‐pressure (UHP) metamorphic terrane of the Eastern Alps. Microscopic observations and Raman spectroscopy show that diamond occurs in situ as inclusions in garnet, being heterogeneously distributed. Under the optical microscope, diamond‐bearing inclusions are of cuboidal to rounded shape and of pinkish, yellow to brownish colour. The Raman spectra of the investigated diamond show a sharp, first order peak of sp3‐bonded carbon, in most cases centred between 1332 and 1330 cm?1, with a full width at half maximum between 3 and 5 cm?1. Several spectra show Raman bands typical for disordered graphitic (sp2‐bonded) carbon. Detailed observations show that diamond occurs either as a monomineralic, single‐crystal inclusion or it is associated with SiC (moissanite), CO2 and CH4 in polyphase inclusions. This rare record of diamond occurring with moissanite as fluid‐inclusion daughter minerals implies the crystallization of diamond and moissanite from a supercritical fluid at reducing conditions. Thermodynamic modelling suggests that diamond‐bearing gneisses attained P–T conditions of ≥3.5 GPa and 800–850 °C, similar to eclogites and garnet peridotites. We argue that diamond formed when carbonaceous sediment underwent UHP metamorphism at mantle depth exceeding 100 km during continental subduction in the Late Cretaceous (c. 95–92 Ma). The finding of diamond confirms UHP metamorphism in the Pohorje Mountains, the most deeply subducted part of Austroalpine units.  相似文献   

13.
The Hujiayu Cu deposit,representative of the "HuBi-type" Cu deposits in the Zhongtiao Mountains district in the southern edge of the North China Craton,is primarily hosted in graphitebearing schists and carbonate rocks.The ore minerals comprise mainly chalcopyrite,with minor sphalerite,siegenite[(Co,Ni)_3S_4],and clausthalite[Pb(S,Se)].The gangue minerals are mainly quartz and dolomite,with minor albite.Four fluid inclusion types were recognized in the chalcopyrite-pyrite-dolomite-quartz veins,including CO_2-rich inclusions(type Ⅰ),low-salinity,liquid-dominated,biphase aqueous inclusions(type Ⅱ),solid-bearing aqueous inclusions(type Ⅲ),and solid-bearing aqueous-carbonic inclusions(type Ⅳ).Type I inclusion can be further divided into two sub-types,i.e.,monophase CO_2 inclusions(type Ⅰa) and biphase CO_2-rich inclusions(with a visible aqueous phase),and type Ⅲ inclusion is divided into a subtype with a halite daughter mineral(type Ⅲa) and a subtype with multiple solids(type Ⅲb).Various fluid inclusion assemblages(FIAs) were identified through petrographic observations,and were classified into four groups.The group-1 FIA,consisting of monophase CO_2 inclusions(type Ⅰa),homogenized into the liquid phase in a large range of temperatures from-1 to 28℃,suggesting post-entrapment modification.The group-2 FIA consists of type Ⅰb,Ⅲb and Ⅳ inclusions,and is interpreted to reflect fluid immiscibility.The group-3 FIA comprises type Ⅱ and Ⅲa inclusions,and the group-4FIA consists of type Ⅱ inclusions with consistent phase ratios.The group-1 and group-2 FIAs are interpreted to be entrapped during mineralization,whereas group-3 and group-4 FIAs probably represent the post-mineralization fluids.The solid CO_2 melting temperatures range from-60.6 to56.6℃ and from-66.0 to-63.4℃ for type Ⅰa and type Ⅳ inclusions,respectively.The homogenization temperatures for type Ⅱ inclusions range from 132 to 170℃ for group-3 FIAs and115 to 219℃ for group-4 FIAs.The halite melting temperatures range from 530 to 562℃ for typeⅢ b and Ⅳ inclusions,whereas those for type Ⅲa inclusions range from 198 to 398℃.Laser Raman and SEM-EDS results show that the gas species in fluid inclusions are mainly CO_2 with minor CH_4,and the solids are dominated by calcite and halite.The calcite in the hosting marble and dolomite in the hydrothermal veins have δ~(13)C_(V-pdb) values of-0.2 to 1.2‰ and-1.2 to-6.3‰,and δ~(18)O_(v-smow) values of 14.0 to 20.8 ‰ and 13.2 to 14.3‰,respectively.The fluid inclusion and carbon-oxygen isotope data suggest that the ore-forming fluids were probably derived from metamorphic fluids,which had reacted with organic matter in sedimentary rocks or graphite and undergone phase separation at 1.4-1.8 kbar and 230-240℃,after peak metamorphism.It is proposed that the Hujiayu Cu deposit consists of two mineralization stages.The early stage mineralization,characterized by disseminated and veinlet copper sulfides,probably took place in an environment similar to sediment-hosted stratiform copper mineralization.Ore minerals formed in this precursor mineralization stage were remobilized and enriched in the late metamorphic hydrothermal stage,leading to the formation of thick quartz-dolomite-sulfides veins.  相似文献   

14.
The Ciemas gold deposit is located in West Java of Indonesia,which is a Cenozoic magmatism belt resulting from the Indo-Australian plate subducting under the Eurasian plate.Two different volcanic rock belts and associated epithermal deposits are distributed in West Java:the younger late Miocene-Pliocene magmatic belt generated the Pliocene-Pleistocene epithermal deposits,while the older late Eocene-early Miocene magmatic belt generated the Miocene epithermal deposits.To constrain the physico-chemical conditions and the origin of the ore fluid in Ciemas,a detailed study of ore petrography,fluid inclusions,laser Raman spectroscopy,oxygen-hydrogen isotopes for quartz was conducted.The results show that hydrothermal pyrite and quartz are widespread,hydrothermal alteration is well developed,and that leaching structures such as vuggy rocks and extension structures such as comb quartz are common.Fluid inclusions in quartz are mainly liquid-rich two phase inclusions,with fluid compositions in the NaCl-H20 fluid system,and contain no or little CO_2.Their homogenization temperatures cluster around 240℃-320℃,the salinities lie in the range of 14-17 wt.%NaCl equiv,and the calculated fluid densities are 0.65-1.00 g/cm~3.The values of δ~(18)O_(H2O-VSMOW)for quartz range from +5.5‰ to +7.7‰,the δD_(VSMOW) of fluid inclusions in quartz ranges from-70‰ to-115‰.All of these data indicate that mixing of magmatic fluid with meteoric water resulted in the formation of the Ciemas deposit.A comparison among gold deposits of West Java suggests that Miocene epithermal ore deposits in the southernmost part of West Java were more affected by magmatic fluids and exhibit a higher degree of sulfldation than those of Pliocene-Pleistocene.  相似文献   

15.
与碱性岩有关的碳酸岩型内生稀土矿床在中国乃至世界上轻稀土资源储量中占有极为重要的地位,诸如我国内蒙古的白云鄂博稀土矿床、川西冕宁—德昌稀土成矿带中的牦牛坪、大陆槽等稀土矿床、山东微山县郗山稀土矿床以及美国的Mountain Pass稀土矿床等都属于这种类型的稀土矿床。当前,对于这类稀土矿床的成矿流体演化机制,学界主要存在结晶分异作用、不混溶作用(熔体-熔体不混溶、熔体-流体不混溶以及流体-流体不混溶)以及热液交代蚀变作用之间的分歧。结晶分异作用可以使具有不相容性的稀土元素在残余熔体相中逐渐富集,直至形成稀土矿物。不混溶作用能够使稀土元素在不混溶后形成的两相或多相中的某一相中发生选择性富集,形成稀土矿化。成矿流体演化晚阶段的热液流体对早期生成的矿物或围岩进行交代蚀变,使其释放出能与稀土元素在热液中形成络合物的F-、(CO_3)~(2-)以及(SO_4)~(2-)等阴离子(团),并最终在合适的构造控矿部位和外界环境条件下,重结晶或沉淀出稀土矿物。上述3种观点各有其理论依据,但是在解释一些碳酸岩型稀土矿床地质现象或实验地球化学模拟结果的时候都或多或少存在一定程度上的不足。前人的研究结果表明,碳酸岩型稀土矿床中发育了大量的熔体包裹体、熔体-流体包裹体以及富CO_2的流体包裹体,以往在利用Linkam TS1400XY以及Linkam THMS600等这类常规高温热台,在101325 Pa条件下对其进行热力学测温时,这些包裹体大多在尚未达到完全均一状态前就已发生爆裂或泄露,极大制约了人们对这类稀土矿床在高温岩浆阶段和中高温岩浆-热液阶段成矿流体演化过程的认知。另外,对于稀土元素在成矿流体演化过程中的含量变化特征及其地球化学行为的研究,目前主要是通过包裹体成分组成的拉曼光谱分析,以及对矿体和围岩进行的全岩地球化学分析,尚缺乏单个包裹体中元素含量的原位微区分析方面的数据。未来,对碳酸岩型稀土矿床中发育的熔体包裹体、熔体-流体包裹体和富CO_2的流体包裹体,利用热液金刚石压腔开展高温高压原位均一实验模拟研究,以及对单个包裹体中微量元素的含量利用LA-ICP-MS进行原位微区分析,将是揭示该类稀土矿床成矿流体演化机制的关键。  相似文献   

16.
The enderbites from Tromøy in the central, granulite facies part of the Proterozoic Bamble sector of southern Norway contain dominantly CO2 and N2 fluid inclusions. CO2 from fluid inclusions in quartz segregations in enderbites was extracted by mechanical (crushing) and thermal decrepitation and the δ13C measured. Measurement was also made on samples washed in 10% HCl, oxidized with CuO at high temperatures, and step-wise extracted with progressive heating. Results between the different techniques are systematic. The main results show δ13C of -4.5±1.5% for crushing and -7±2% for thermal decrepitation. δ13C is about constant for CO2 extracted at different temperatures and points to a homogeneous isotopic composition. Due to the presence of carbonate particles and/or induced contaminations for the extraction by thermal decrepitation, the results for the crushing experiments are assumed the most reliable for fluid-inclusion CO2. Very low values of δ13C have not been found in enderbite samples and δ13C combined with δ18O of the host quartzes (8-11%) indicates juvenile values. In addition, the fluid inclusions were examined by microthermometry and Raman analysis and host quartz by acoustic emission and cathodoluminescence. CO2 fluid inclusions have varying densities with a frequency maximum of 0.92 g cm-3 and generally do not concur with trapping densities at granulite conditions. Textures show that CO2 must have been trapped in fluid inclusions in one early event, but transformed to different extents during late isothermal uplift without important fractionation of isotope compositions. The present data support a model of intrusion and crystallization of a CO2-rich enderbitic magma at granuiite conditions.  相似文献   

17.
黔东南石英脉型金矿床中铁白云石流体包裹体研究   总被引：1，自引：1，他引：0       下载免费PDF全文
铁白云石是黔东南石英脉型金矿主成矿阶段的主要脉石矿物之一,与金的矿化关系十分密切,在金的运移、沉淀等方面起着重要作用,其流体包裹体特征可以反映成矿流体性质。通过对铁白云石开展系统的流体包裹体岩相学观察、均一法测温和冰点测定,计算出包裹体盐度和密度等数据。结果表明: 铁白云石包裹体较为发育,以含CO2的包裹体为主; 均一温度集中在240~300 ℃范围内,平均均一温度为267.21 ℃; 成矿流体的盐度为7.31%~21.40%(NaCl),平均为15.31%(NaCl); 成矿流体的密度介于0.72~0.97 g/cm3之间,平均为0.89 g/cm3。认为黔东南石英脉型金矿床属于低盐度、高密度的中温热液矿床。  相似文献   

18.
In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions are high salinity aqueous fluids (NaCleq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCleq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO2-H2O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO2 were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types of fluid inclusions suggests that CO2 fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites in metamorphic terrains.  相似文献   

19.
The Bujinhei Pb–Zn deposit is located in the southern Great Xing'an Range metallogenic belt. It is a representative medium‐ to high‐temperature hydrothermal vein type deposit controlled by fractures, and orebodies hosted in the Permian Shoushangou Formation. The hydrothermal mineralization is classified into three stages: pyrite ± arsenopyrite–quartz (Stage 1), polymetallic sulfide–quartz (Stage 2), and polymetallic sulfide–calcite (Stage 3). Fluid inclusion petrography, laser Raman analyses and microthermometry indicate that the liquid‐rich aqueous inclusions (L) and vapor‐rich CO2 ± CH4–H2O inclusions (C) occur in the Stage 1 and as medium‐ to high‐ temperature and low‐ to medium‐salinity NaCl–H2O–CO2–CH4 hydrothermal fluids. The liquid‐rich (L) and rare vapor‐rich CO2 ± CH4–H2O inclusions (C) occur in the Stage 2 with medium‐temperature and low‐salinity NaCl–H2O ± CO2 ± CH4 hydrothermal fluids. The exclusively liquid‐rich (L) fluid inclusions are observed in the Stage 3, and the hydrothermal fluid belongs to medium‐temperature and low‐salinity NaCl–H2O hydrothermal fluids. The results of hydrogen and oxygen isotope analyses indicate that ore‐forming fluids were initially derived from the magmatic water and mixed with local meteoric water in the late stage (δ18OH2O‐SMOW = 6.0 to 2.2‰, δDSMOW = ?103 to ?134‰). The carbon isotope compositions (?18.4‰ to ?26.5‰) indicate that the carbon in the fluid was derived from the surrounding strata. The sulfur isotope compositions (5.7 to 15.2‰) indicate that the ore sulfur was also primarily derived from the strata. The ore vein No. 1 occurs in fractures and approximately parallel to the rhyolite porphyry; orebodies have a close spatial and temporal relationship with the rhyolite porphyry. The rhyolite porphyry yielded a crystallization age of 122.9  ± 2.4 Ma, indicating that the Bujinhei deposit may be related to the Early Cretaceous magmatic event. Geochemical analyses reveal that the Bujinhei rhyolite porphyry is high in K2O and peraluminous, and derived from an acidic liquid as a result of strong interaction with hydrothermal fluid during the late magmatic stage; it is similar to A2‐type granites, and formed in a backarc extensional environment. These results indicate that the Bujinhei Pb–Zn deposit was a vein type system that formed in Early Cretaceous and influenced by the Paleo‐Pacific tectonic system. Bujinhei deposit is a representative hydrothermal vein type deposit on the genetic types, and occurs on the western slope of the southern Great Xing'an Range. The ore‐forming fluids were medium‐ to high‐temperature and low‐to medium‐salinity NaCl–H2O–CO2–CH4 hydrothermal fluids, which became medium‐temperature and low‐salinity NaCl–H2O hydrothermal fluids in later stages, and came from magmatic water and mixed with meteoric water, whereas the ore‐forming materials were mainly derived from the surrounding strata. The LA–ICP–MS zircon U–Pb dating indicates that the Bujinhei deposit formed at the period of late Early Cretaceous, potentially in a backarc extensional environment influenced by the Paleo‐Pacific tectonic system.  相似文献   

20.
Fluid inclusions in mineralized graphite-sillimanite-mica schist from the Rampura-Agucha Pb-Zn-(Ag) deposit, Rajasthan, northwest India, have been investigated by microthermometry and Raman microspectrometry. Three different main types of fluid inclusions in quartz can be distinguished: (1) gaseous (CO2, partially mixed with CH4-N2), (2) low salinity aqueous inclusions (0–8 eq. wt% NaCl) and (3) high salinity aqueous inclusions (NaCl ± MgCl2-CaCl2). Low density CO2-rich and low salinity H2O inclusions are contemporaneous and occur, together with CH4-N2 inclusions, in close association with sulfide mineral inclusions. This indicates immiscibility between the gaseous and aqueous phase and participation of these fluids during the deposition or remobilization of the ore, which occurred over a wide P (1220 to 200 bar) and T (450 to 250 °C). Raman spectra of graphite indicate upper greenschist-facies metamorphic conditions, although host rocks have been metamorphosed at upper amphibolite-facies metamorphic conditions. This indicates that graphite re-equilibrated with the CO2-rich phase during retrograde metamorphism.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号