共查询到20条相似文献，搜索用时 15 毫秒
1.
首先对斑脱土衬里(粘土-斑脱土、砂-斑脱土) 进行变水头实验, 得粘土-斑脱土的渗透系数为6.0×10-9~3.0×10-8cm/s, 砂-斑脱土的渗透系数为1.0×10-9~3.0×10-9cm/s.从防渗角度分析, 2种斑脱土混合物均适合作垃圾填埋场的底层衬里.然后对斑脱土衬里进行持水与水迁移实验, 评价斑脱土衬里水的迁移特性.以水迁移实验为基础, 模拟斑脱土衬里与地基5种不同含水量的条件, 对斑脱土衬里进行直接剪切实验, 测定斑脱土衬里的剪切强度及斑脱土衬里与地基接触面的剪切强度.再对斑脱土衬里进行三轴固结不排水实验, 测定其总剪切强度与有效剪切强度.实验结果表明: 地下水具有很大的潜力从地基流向斑脱土衬里, 从而大大提高斑脱土衬里的含水量; 随着含水量的增加, 粘土-斑脱土、砂-斑脱土衬里的抗剪强度逐渐减小.根据实验所获得的抗剪强度参数, 选择日本山谷型垃圾填埋场典型剖面, 对山谷型垃圾填埋场进行稳定性评价.结果表明: 对于角度小于20°的缓倾角山谷型垃圾填埋场, 使用粘土-斑脱土、砂-斑脱土作为底层衬里是稳定的.因此, 2种斑脱土混合物适合作山谷型垃圾填埋场的底层衬里. 相似文献
2.
水化后的土工织物黏土垫层(GCls)是良好的复合防渗材料,但同时表现出较低的抗剪强度特性。为改善水化后的GCls抗剪强度低的缺陷,拟采用取自天然并经人工调配的宽级配砾质土料代替黏土作为GCls防渗垫的保护层,共同构成复合防渗系统。文中利用TGH直剪摩擦拉伸仪对筛选出的宽级配砾质土及其与不同水化条件下的GCL接触面进行了试验研究,得到宽级配砾质土样及其与质量含水率分别为50%和完全水化的GCL接触面的抗剪强度试验数据并进行了整理分析。结果显示,宽级配砾质土样的抗剪强度大于其与不同水化条件下的GCL接触面的抗剪强度,且宽级配砾质土与GCL接触面的抗剪强度随GCL含水率的增加而减小。因此,可以根据外荷载作用下土中应力会发生扩散的原理,利用抗剪强度高和压缩性低的砾质土来承担部分甚至全部荷载,以弥补水化后的GCls抗剪强度低的缺陷。 相似文献
3.
垃圾填埋场复合衬垫剪切特性单剪试验研究 总被引：1，自引：0，他引：1
针对垃圾填埋工程中复合衬垫的界面抗剪特性,利用改进的叠环式单剪仪,对由砂土-无纺型土工布-土工网格-土工膜-夯实粘土组成复合衬垫进行了整体剪切试验研究。重点讨论了复合衬垫整体单剪试验的应力-位移曲线、相同剪切应力下各个界面的位移大小与变化特征和强度特性。研究结果表明：复合衬垫整体单剪试验的应力-位移曲线在低法向应力试验中没有呈现明显的软化特征,在高法向应力试验中有硬化现象;随法向应力增加剪切破坏面会发生转移;目前常用的把复合衬垫拆分为单个界面进行研究来确定最危险界面的方法不能够正确地反映填埋场中的复合衬垫在加载过程中的衬垫单元的实际受压变形情况和在剪切变形过程中最危险破坏面转移的情况;复合衬垫界面的抗剪强度包线呈现双曲线性质。 相似文献
4.
Saravanan Mariappan Masashi Kamon Faisal Haji Ali Takeshi Katsumi Tomoyuki Akai Toru Inui Masaki Nishimura 《Geotechnical and Geological Engineering》2011,29(5):881-898
This paper addresses the study conducted on the performance of landfill liner interface parameters. Interface shear strength
parameters for various combinations of 9 different lining materials were studied and presented in this paper. This comprehensive
testing program covers the interfaces between: (1) soil and compacted clay liner (CCL), (2) geomembrane (HDPEs or PVC) and
soil, (3) geosynthetic clay liner (GCL)/CCL and soil, (4) geomembrane and geotextile, (5) geotextile and soil, (6) geotextile
and GCL/CCL, and (7) geomembrane and GCL/CCL. The experiments were conducted for both at dry or optimum moisture condition
and at saturated or wet condition. The interface performance under both conditions were compared to access the material performances.
Tabulated summaries of interface test data under dry or optimum moisture condition (OMO) and saturated or wet condition are
presented in the paper. 相似文献
5.
A theoretical and experimental study of the unconfined penetration test (UP) method was conducted to determine the tensile
strength of contaminated and compacted sand-bentonite mixtures, which are used widely in the landfill construction sites as
a clay liner. To do this, the original UP device and experimental procedure were modified to reduce the measurement errors
and named as the improved unconfined penetration (IUP) test. Experiments were carried out to examine the variation in tensile
strength as a function of disk diameter, loading rate and pH level. The results of the experiments provided the following
important findings. The tensile strength increases with an increase in the disk diameter. The tensile strength is not sensitive
to the loading rate in the range of 0.1%/min–1.0%/min. A specimen compacted with a low pH value of water shows a high tensile
strength, because a lower pH solution increases soil particle bonding stresses. 相似文献
6.
千枚岩残坡积土大型直剪试验研究 总被引：1，自引：0，他引：1
土体抗剪强度是边坡稳定性分析的重要力学参数,而大型直剪试验是确定粗粒土抗剪强度指标较为有效的方法,但获取所需原状土样较为困难。通过现场挖取边坡残坡积原状土样,开展原状土样和击实土样的室内常规小型直剪对比试验,证明在有效控制密度、干密度和含水率条件下采用击实土样获取的直剪强度指标可替代原状土样试验结果。击实土样的大型直剪与原状土样的常规直剪试验结果对比分析表明,由常规小型直剪试验获得残坡积土的抗剪强度略高于大型直剪试验结果。由于室内常规小型直剪试验获取的抗剪强度指标往往比边坡实际发生滑动时的抗剪强度指标稍大,建议在边坡稳定性分析中对抗剪强度指标选取时,采用以大型直剪试验获得的有效控制密度、干密度和含水率条件下击实土样的峰值强度和残余强度,由此进行的边坡稳定性计算将更为科学合理 相似文献
7.
百色重塑膨胀土抗剪强度的试验研究 总被引：3，自引：0，他引：3
通过对不同初始含水率、不同干密度下百色重塑膨胀土直剪试验,研究了百色击实重塑膨胀土在不同垂直压力下的峰值强度和残余强度,分析了其抗剪强度的作用机制。研究表明：随着干密度的增加,土体的峰值强度增大,残余强度变化不大;随着上覆荷载的增加,土体的抗剪强度明显增加,表明物理处治技术填筑膨胀土路堤能保证其强度和稳定性;干密度对重塑膨胀土的峰值强度影响较大,而对残余强度影响很小;重塑膨胀土的残余强度与它的结构、应力历史、起始含水率没有关系,而只取决于黏土颗粒的形态、大小、含量和矿物成分等因素。 相似文献
8.
垃圾填埋场中渗滤液的作用可能对压实黏土衬垫及地基土的力学性质产生一定的影响,但目前研究成果存在矛盾之处。以CaCl2溶液和苯酚溶液作为渗滤液中无机和有机污染物的代表,对添加10%钠基膨润土的压实黏土进行力学性质的试验研究。结果表明,（1）两种模拟渗滤液的作用使土的压缩性增强,抗剪强度降低。（2）苯酚对压实黏土力学性质的影响更为显著,不排水强度约为自来水和0.05molL-1CaCl2溶液的55%。（3）土样初始孔隙比相同时,溶液作用下扩散双电层变薄造成孔隙变大,可能是产生这种现象的主要原因。（4）模拟渗滤液的作用对压实黏土衬垫及地基土具有不利的影响。 相似文献
9.
深厚表土层冻结法凿井工程中,深部土体由于经历了高压冻融作用,导致其工程性质变化,认识冻融作用对其强度与变形影响,对于冻融病害防治有一定意义。本文通过室内试验对深部重塑黏土进行了有载冻融,并对不同干密度、围压、冻结温度和融化温度条件下的深部冻融重塑黏土进行三轴剪切试验,探讨有载冻融作用下深土重塑土抗剪强度的变化规律。研究结果表明:冻融作用使深部重塑黏土的偏应力-应变关系由软化型转变成硬化型;同时,经冻融作用后其抗剪强度与割线模量都产生了一定的下降,在本试验条件下,抗剪强度最高下降了48.8%,割线模量E_()最大下降了72.0%。通过对各影响因素的显著性分析,发现初始干密度对抗剪强度和割线模量影响最为显著,围压对两者的影响最弱。 相似文献
10.
为研究高填方路堤压实土率相关变形特征,对不同压实度的非饱和压实土分别开展了不同加载速率以及不同围压条件下的CD三轴剪切试验,探讨了不同工况下压实土的剪切强度指标;借助GDS饱和土静态三轴仪的围压控制器来间接测定非饱和压实土体变的途径。试验结果表明：压实土强度及变形特征具有明显的时间相依性,加载速率越大,压实土的抗剪强度越高,超固结变形特性越强,抗剪强度指标黏聚力c值增幅较大、内摩擦角 值增幅较小;低围压下,压实土呈应变软化及剪胀变形,且压实度越高,应变软化及剪胀变形越显著,c值增加明显、 值增加缓慢。采用基于下负荷面的弹黏塑性本构模型对路基压实土的率相关变形特征进行表征,预测结果与试验数据吻合良好,表明该模型适用于高填方路堤长期沉降分析。 相似文献
11.
饱和膨润土及其与砂混合物的压缩变形特性 总被引：1，自引：0，他引：1
对用不同制样方法得到的饱和膨润土及其与砂混合物进行了压缩试验。试验结果表明,饱和膨润土的压缩曲线呈双线性,不同于普通黏土的压缩曲线。压缩试验中量测了侧向应力,由此得到的饱和膨润土的静止侧向压力系数值较一般黏土的数值要大。对膨润土与砂混合物的击实样进行了由非饱和到饱和状态的浸水试验,并得出试验过程中侧向应力的变化规律。由于浸水饱和的试样和抽真空饱和的试样在较高压力时压缩曲线趋于一致,可采用快速抽真空饱和的方法进行试验研究,以缩短非饱和混合物击实样浸水饱和所需时间。引入骨架孔隙比的概念,用来判断膨润土与砂混合物中砂骨架是否形成,得出影响混合物压缩特性的决定因素。 相似文献
12.
This paper gathered available flow and transport solutions and used them for two composite liners, consisting of geomembrane
(GM) overlying either a compacted clay liner (CCL) or a geosynthetic clay liner (GCL). Its aim is to provide a guiding framework
for the possible choices of (a) approaches to bottom liner design, (b) respective analytical solutions to flow and transport
equations, as well as (c) parameters required for each type of solution. On the basis of the obtained results, the following
recommendations are made. When the goal of analysis is to determine material equivalency, leachate flow rate is an adequate
key parameter for GM-CCL composite liners. For GM-GCL composite liners, it is necessary to compute contaminant concentration
or mass flux, considering (a) transport through defects for inorganic contaminants and (b) diffusion and the contribution
of any available attenuation layer for organic contaminants. When the goal of analysis is to assess impact to groundwater,
it is advised to calculate both discharge rate and contaminant mass flux regardless of liner type. The critical parameter
for the transport calculations is the retardation factor of the contaminant, for the case of CCLs, while the results for GCLs
are much less sensitive to this parameter. 相似文献
13.
基于冻融交界面直剪试验的冻土斜坡失稳过程研究 总被引：1，自引：0，他引：1
为了探讨多年冻土区自然斜坡失稳机制,开展了不同含水率黏土、粉土、砂土的土-冰交界面直接剪切试验和相应融土的直接剪切试验。结果表明,砂土和砂土-冰冻融交界面剪切应力-变形特性主要表现为弹性变形,且剪应力存在明显峰值;粉土、黏土及相应的冻融交界面在很小的变形范围内表现为塑性变形,且剪应力无峰值。水分对砂土活动层抗剪强度影响较弱,表现为水分增高,内摩擦角小幅降低。水分对粉黏土活动层抗剪强度影响剧烈,表现为水分增高,粉黏土黏聚力急剧减小。研究发现,冻土区斜坡失稳更易发生于细颗粒粉黏土中。相对于粉土,粉土-冰冻融交界面抵抗剪切变形的能力更强,粉土斜坡潜在滑动面更易发育在冻融交界面上层附近;相对于黏土,黏土-冰冻融交界面抵抗剪切变形的能力更弱,黏土斜坡更易在冻融交界面处发生滑动。同时,细粒土斜坡极易在达到最大融化深度前提前失稳,斜坡坡度越高,失稳时间越提前。融化期活动层水分增多导致潜在滑动面黏聚力降低是细粒土冻土斜坡失稳的最主要原因,孔隙水压对冻土斜坡具有一定影响,在稳定性评价时要考虑活动层水位的影响。 相似文献
14.
Over the last decade, waste disposal has become a particularly sensitive issue in Algeria. New legislation concerning landfill
liner design has been adopted. Traditional methods of landfill liner characterization involve soil sampling and chemical analysis,
which are costly, destructive and time-consuming. New techniques are currently being investigated that aim to provide nondestructive
liner characterisation. This paper details technical aspects associated with electrical conductivity measurements within landfill
liners and presents experimental work to show the direct application of electrical techniques to track ionic movement through
a sand bentonite liner under chemically induced flow. Samples of sand bentonite were mixed and compacted with NaCl electrolytes
at different concentrations. The electrical conductivities of compacted specimens were measured with a two-electrode cell.
The effects of frequency and electrolyte concentration on the conductivity measurement were explored. The relationship between
the soil electrical conductivity and the NaCl electrolyte concentration in interstitial pore fluid was determined. The conductivity
measurements were used to quantify the pore fluid concentration and effective diffusion coefficient of sand bentonite liners.
It is concluded here that the electrical conductivity of compacted specimens depends mainly on the salt concentration in the
pore fluid, and that this approach could therefore be used to track ionic movement through liners during diffusion. 相似文献
15.
Amer A. Al-Rawas Yahia E-A. Mohamedzein Abdulaziz S. Al-Shabibi Salem Al-Katheiri 《Geotechnical and Geological Engineering》2006,24(5):1365-1383
Absrtract This paper investigates the potential use of sand–attapulgite (palygorskite) mixtures as a landfill liner. The sand and attapulgite
clay used in this study were brought from Wahiba (eastern Oman) and Al-Shuwamiyah (southern Oman), respectively. Initially
the basic properties of the sand and clay were determined. Then the attapulgite clay was added to the sand at 5, 10, 20 and
30% by dry weight of the sand. The sand–attapulgite clay mixtures were subjected to mineralogical, chemical, microfabric and
geotechnical analyses. The X-ray diffraction (XRD) qualitative analysis showed that attapulgite is the major clay mineral.
The chemical compounds, exchangeable cations and cation exchange capacity (CEC) for the␣samples were determined. The CEC for
the sand–clay mixtures is low but increases with the increase in clay content. The scanning electron microscope (SEM) examination
showed that the addition of clay developed coating between and around the sand grains which results in filling the voids and
reducing the hydraulic conductivity of the sand–clay mixtures. The hydraulic conductivity values for the pure clay and sand
+ 30% clay mixture prepared at 2% above optimum water content are slightly higher than hydraulic conductivity requirements
for landfill liners but can be acceptable. The geotechnical study which included grain size distribution, Atterberg limits,
specific gravity, compaction, hydraulic conductivity and shear strength tests showed that the sand+30% clay mixture prepared
at 2% above optimum water content can be considered to satisfy the requirements for landfill liners. For all sand–clay mixtures
no swelling was recorded and the addition of clay to the sand improved the shear strength. 相似文献
16.
17.
以高液限土为填料的加筋挡墙广泛在南方地区应用,加筋挡墙土体吸力经常随气候变化而发生变化,直接影响筋土界面强度特性,考虑吸力变化的非饱和高液限黏土-土工织物界面强度特性亟待深入研究。利用ZFY-1A型非饱和土应变控制式直剪仪对非饱和高液限黏土-土工织物界面进行控制吸力的剪切试验,探讨吸力循环变化（干湿循环）对筋-土界面剪切特性的影响。研究表明,高液限黏土-土工织物界面的抗剪强度随着净法向应力的增加而增大;随着循环次数的增加,界面强度呈现先升高而后衰减的变化规律。经历3次干湿循环的界面强度低于未经历干湿循环的强度。随着循环次数的增加,界面强度总体上呈降低趋势。吸力增加的速率 随吸力循环次数的增加先增大后减小,有效界面摩擦角 、界面有效黏聚力 、界面综合摩擦系数 、综合摩擦系数比K与此类似。 含水率变化量的最大值随着净法向应力、循环次数的增加而增大。最大剪胀量 随循环次数的增加先增大后减小,随净法向应力的增大而减小。最后通过对数拟合,得出经历若干次基质吸力循环后的界面强度计算公式。 相似文献
18.
膨润土改性黄土衬里防渗性能室内测试与预测 总被引：2，自引：0，他引：2
试验测定了膨润土改性黄土试样的渗透系数,研究膨润土改性黄土用作废弃物填埋场衬里的可行性,为天然黏土匮乏地区防渗材料本土化提供依据。选取两种代表性黄土,即黏性较大的兰州黄土(LH)和砂性较大的榆林黄土(YH),分别向其中添加不同比例的两种膨润土后击实成样,利用柔性壁渗透仪测定改性黄土的渗透系数,分析了改性黄土渗透系数随膨润土添加率增大的变化规律,确定了满足衬里防渗要求的膨润土添加率。利用扫描电镜照片统计了改性黄土的孔隙特征参数,发现添加膨润土后黄土中原有的大孔隙被充填或分隔成更多的中、小孔隙,有效阻滞了渗流液体通过,从微观结构的角度揭示了改性黄土渗透性降低的实质。依据实测数据建立了膨润土改性黄土的渗透回归模型,据此可以预测不同添加量的膨润土改性黄土的渗透系数。 相似文献
19.
Yahia E.-A. Mohamedzein Amer A. Al-Rawas Mohammed Y. Al-Aghbari Ahmed Qatan Abdul-Hamid Al-Rawas 《Engineering Geology》2005,80(3-4):271-281
The possibility of using crushed shales as landfill liners is investigated in this study. Two types of shales were studied by performing the following laboratory tests: hydraulic conductivity, compaction, swelling, consolidation, X-ray diffraction (XRD), scanning electron microscope (SEM) and chemical analysis. For both compacted shales, the hydraulic conductivity was in order of 10− 7 cm/s or less which satisfies the specifications for landfill liners. The results of XRD and SEM support the low values of the hydraulic conductivity. Because of the dominant presence of low-activity kaolinite, there was no significant change in the hydraulic conductivity when the compacted shales are exposed to calcium chloride solution. The compressibility of the compacted clay was low and no serious post-construction settlement is expected. The shear strength of the compacted shales was within the usual expected range for earthen liners and, therefore, should pose no challenges with respect to shear strength. The crushed shales also satisfy the other criteria related to Atterberg limits and grain size. 相似文献
20.
土工格栅与土界面作用特性试验研究 总被引：9，自引：4，他引：5
土工格栅与土的界面摩擦特性指标是加筋土工程设计的关键。通过分析土工格栅与土的界面摩擦作用和进行了直剪摩擦试验和拉拔摩擦试验,测试了两种试验条件的界面摩擦特性。在两种试验条件下,土工格栅加筋土复合体的抗剪强度均有界面摩擦角φsq和界面凝聚力csq,且土工格栅与土相对位移量的不同,其复合体的强度机理有区别。在拉拔摩擦试验中,剪应力峰值强度对应的剪切变形值高于直剪摩擦试验中剪应力峰值强度的剪切变形值5～10倍以上。两种试验均有其适用性,而土与土工格栅的相对位移较小时直剪摩擦试验较能反映实际;土与土工格栅相对位移较大时土与格栅双面均发生相对位移,拉拔摩擦试验更为合适。随法向应力的增大,直剪摩擦和拉拔摩擦试验的剪应力峰值以及剪应力峰值对应的位移均提高。直剪摩擦的剪切速度小,剪应力峰值强度高,且达到峰值强度的剪切位移大;增加剪切速度,剪应力峰值强度降低,且对应的位移也减少,其原因是界面上的孔隙水压力消散和筋材的应力松弛。应根据具体工程的需要选择直剪摩擦试验和拉拔摩擦试验确定设计参数。 相似文献