首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
Previous studies suggested an important, but yet poorly-understood, tectonic transition in the Altaids (also termed the Central Asian Orogenic Belt, CAOB) in the Permian. This tectonic transition, clearly documented by published stratigraphic data and provenance analyses, suggested a unified Junger–Turfan basin in northwest China in Permian time and it further indicated that extension dominated Early Permian tectonics in the region, whereas flexural, foreland subsidence controlled Late Permian basin evolution. Our new structural observations, microtectonic analyses, and 40Ar/39Ar geochronological data from southwest of the Turfan basin reveal that in the late Early Permian (266 Ma) a NS-directed contractional deformation operated along the southern border of the unified Junger–Turfan basin, which was probably related to the transition in basin evolution. The contraction gave rise to a NW-striking right-lateral transpressional, rather than simple-shear dextral, ductile shear zone along the southwestern border of the Turfan basin, and to an interference fold pattern together with closely-spaced, concentrated cleavage and thrusts in a constrictional strain regime in the basin interior. After the Late Permian the tectonic evolution of the CAOB changed from Paleozoic continental amalgamation to Mesozoic–Cenozoic intracontinental orogenic reactivation.  相似文献   

2.
《Gondwana Research》2014,25(2):820-841
The Huoshishan–Niujuanzi ophiolitic mélange (HNO) is located near the central part of the Beishan Orogenic Belt in the southernmost Altaids. The HNO consists of ultramafic rocks, cumulate gabbros, gabbros, plagiogranites, diorites, diabases, basalts, andesites, rhyolitic volcaniclastic rocks and siliceous sedimentary rocks, many of which are in a schist matrix (Gongpoquan Group). Geochemical data of the mafic rocks indicate a calc-alkaline or a mixture of calc-alkaline and tholeiitic rocks with negative Nb, Ta and positive Pb, Ba and La anomalies, suggesting formation in an island arc or supra-subduction zone setting. A gabbro from a block in the mélange in the Niujuanzi area has a zircon age of 435.0 ± 1.9 Ma and a plagiogranite with an age of 444.3 ± 1.9 Ma, and another gabbro from the Huoshishan area has an age of 410.5 ± 3.7 Ma. The schist matrix has a zircon age of 512 ± 5.3 Ma and contains Silurian, Devonian and Carboniferous fossils, thus the mélange formed in the late Carboniferous or later. Our structural analysis of fault planes in the HNO, the crenulation cleavages (S2) of the schist, and fold axial planes of early Permian sandy limestone/quartz veins and late Permian sandstones indicates that the mélange underwent a north-to-south compression, and the orientation of stretching lineations, slickensides and fold hinge lines implies that the HNO experienced top-to-the north (or -northwest) movement. The entire planar and linear structural data set suggests that the subduction polarity was probably to the south in the late Paleozoic. The emplacement age of the HNO was probably near the end-Permian based on the age of the youngest rocks in the ophiolitic mélange, and by the presence of a late Permian unconformity. From our work, integrated with published regional data, we outline a comprehensive geodynamic model for the central BOC.  相似文献   

3.
A multiple-deformation sequence is established for different types of gneisses, mafic-paleosomes and banded magnetite quartzites (BMQ) exposed within the area. In gneisses, the basin-shaped map pattern represents the type-i interference structure formed due to the overprinting of F3 folds with ENE striking axial planes on F2 folds with axial planes striking NNW. The BMQ band occurring as an enclave within the gneissic country, represents a large scale F1 fold with relatively smaller scale F2 folds developed on its limbs. Mafic-paleosomes within the streaky-charnockitic-gneisses exhibit structures formed due to the interference of more than two phases of folding (F1,Fla,F2,F3). It is shown that the deformation plan in these rocks is consistent with the generalized deformation scheme for Granite-greenstone belts. The difference in the map pattern of Granite-greenstone belts and Granulite-charnockite terrains is ascribed to the variance in Theological properties, layerthickness ratios and local displacement directions during different phases of folding. These differences apart, both the Granite-greenstone and Granulite-charnockite provinces in South India are deformed by an early isoclinal folding which is successively overprinted by folding on NNW and ENE striking axial planes.  相似文献   

4.
《Journal of Structural Geology》2001,23(6-7):1103-1121
Structural relationships of granitoid rocks dated by the U–Pb method indicate that deformation was diachronous and a strain gradient exists in a 6-km-thick section beneath the Selkirk allochthon, in the northern Monashee complex, one of the deepest structural exposures in the southern Canadian Cordillera. At high structural levels, immediately beneath a crustal-scale thrust zone that transported the allochthon eastward, a metasedimentary-dominated cover sequence was strongly affected by kilometre-scale east-verging isoclinal folds (F1) and outcrop-scale folds (F2) that are associated with the dominant foliation and lineation. The F2 folding occurred, at least in part, after 58 Ma and ceased by 55 Ma. In deeper levels of the cover sequence and the underlying orthogneiss-dominated basement, F2 folding occurred, at least in part, after 52 Ma and ceased by 49 Ma. Proterozoic dykes in the basement were locally weakly affected by D2. These new findings require that: (i) D2 compression youngs structurally downward, synchronous with the thermal peak of metamorphism; (ii) D2 in deeper levels is synchronous with extension above the complex that was partly responsible for its exhumation; and (iii) a D2 strain gradient lies between strongly deformed cover rocks and weakly D2-deformed basement rocks. We propose a model in which rocks that were tectonised at different places and times within the orogen were juxtaposed, likely during east-verging kilometre-scale F1 folding and shearing along the isocline limbs (a similar model was previously proposed to explain a pattern of downward younging thermal peak ages and an inverted metamorphic sequence in higher rocks). The rapid downward decrease in deformation intensity suggests that the lower limit of significant Cordilleran strain lies in the exposed basement. Cessation of deformation at this level is attributed to the fact that the basement attained elevated temperatures and began straining when the Cordilleran tectonic regime changed from compressional to extensional.  相似文献   

5.
The Chengde-Pingquan region is located in the central part of the Yanshan Orogenic Belt (YOB). At Daheishan and Pingquan in the central YOB, thrusts and folds of variable trends are displayed in 2 km-scale fold interference patterns. Detailed field mapping was conducted to decipher the geometry of these two superimposed structures. Map-view geometry and stereonet plots for outcrop-scale folds indicate that the superimposed structures form arrowhead interference pattern where NW-SE-trending F1 folds are refolded by later ENE-WSW F2 folding. After remove the effects of later faulting, restored map-views of the superimposed structures show that when the F1 folds have inclined axial surfaces but with no an overturned limb, an arrowhead interference pattern (here called modified type-2 pattern) can form. Our field data and reinterpretation of the findings of previous studies suggest that five major shortening phases have occurred in the Chengde-Pingquan region. The first two phases, which formed the superimposed folds, occurred earlier than the Late Triassic (D1) and during the Late Triassic to Early Jurassic (D2). These two phases were followed by three deformation phases that are mainly characterized by thrusting and strike-slip faulting, which strongly modified the large-scale fold interference patterns.  相似文献   

6.
《Gondwana Research》2014,25(2):842-858
The northern margin of the Alxa block (NMAB), located in the southernmost part of the Altaids, is important for understanding the tectonic processes associated with the closure of the Paleo-Asian ocean. In this study, we report results from our studies on two ophiolitic belts (the Enger Us and Quagan Qulu ophiolitic belts) to constrain the tectonic evolution of the Altaids. The tectonic blocks in the Enger Us ophiolite are mainly composed of ultramafic and mafic rocks, with a matrix comprising highly deformed Carboniferous clastic rocks and tuffs. Zircons from a pillow lava sample yielded SHRIMP zircon U–Pb age of 302 ± 14 Ma. Massive and pillow basalts in the Enger Us ophiolite exhibit N-MORB geochemical affinities, displaying high TiO2 and low K2O contents with tholeiitic signatures. They are characterized by depletion of light rare earth elements (LREEs) without fractionation of high field strength elements (HFSEs) and negative Nb–Ta anomalies. It is inferred that the magmas of these rocks were derived from a depleted mantle source in a mid-ocean ridge setting. The Quagan Qulu ophiolite is composed of tectonic blocks, including ultramafic, gabbros and siliceous rocks, and matrix, including deformed clastic rocks and limestones. Zircons in a gabbro sample from the Quagan Qulu ophiolite yielded SHRIMP zircon U–Pb age of 275 ± 3 Ma. The gabbros show high MgO contents, compatible elements (Ni, Co, Sc, and V), and Al2O3/TiO2 ratios, but low TiO2 and SiO2 contents. They are enriched in large-ion lithophile elements (LILEs) and depleted in LREEs and HFSEs, indicating that they were derived from an extremely depleted mantle source which was infiltrated by a subduction-derived fluid or melt. Our geochemical data suggest that gabbros in the Quagan Qulu ophiolite were formed in a back-arc basin setting. A synthesis of evidence from geochemistry, regional geology, and paleobiogeography support the notion that the Enger Us ophiolitic belt represents the major suture of the Paleo-Asian Ocean in the NMAB and the Quagan Qulu ophiolitic belt represents a back-arc basin. These two ophiolitic belts, together with the Zongnaishan–Shalazhashan arc have been suggested to be a late Paleozoic ocean-arc–back-arc basin system in the southernmost part of the Altaids. The geochronological data suggest that the subduction process occurred even in the early Permian, indicating that the final closure of the Paleo-Asian Ocean might have taken place later than the early Permian.  相似文献   

7.
The supracrustal enclave within the Peninsular Gneiss in the Honakere arm of the Chitradurga-Karighatta belt comprises tremolite-chlorite schists within which occur two bands of quartzite coalescing east of Jakkanahalli(12°39′N; 76°41′E), with an amphibolite band in the core. Very tight to isoclinal mesoscopic folds on compositional bands cut across in the hinge zones by an axial planar schistosity, and the nearly orthogonal relation between compositional bands and this schistosity at the termination of the tremolite-chlorite schist band near Javanahalli, points to the presence of a hinge of a large-scale, isoclinal early fold (F1). That the map pattern, with an NNE-plunging upright antiform and a complementary synform of macroscopic scale, traces folds 'er generation (F 2),is proved by the varying attitude of both compositional bands (S0) and axial pranar schistosity (S 1), which are effectively parallel in a major part of the area. A crenulation cleavage (S 2) has developed parallel to the axial planes of theF 2 folds at places. TheF 2 folds range usually from open to rarely isoclinal style, with theF 1 andF 2 axes nearly parallel. Evidence of type 3 fold interference is also provided by the map pattern of a quartzite band in the Borikoppalu area to the north, coupled with younging directions from current bedding andS 0 -S 1 inter-relation. Although statistically theF 1 andF 2 linear structures have the same orientation, detailed studies of outcrops and hand specimens indicate that the two may make as high an angle as 90°. Usually, in these instances, theF 1 lineations are unreliable around theF 2 axes, implying that theF 2 folding was by flexural slip. In zones with very tight to almost isoclinalF 2 folding, however, buckling attendant with flattening has caused a spread of theF 1 lineations almost in a plane. Initial divergence in orientation of theF 1 lineations due to extreme flattening duringF 1 folding has also resulted in a variation in the angle between theF 1 andF 2lineations in some instances. Upright later folding (F3) with nearly E-W strike of axial planes has led to warps on schistosity, plunge reversals of theF 1 andF 2 axes, and increase in the angle between theF 1 andF 2 lineations at some places. Large-scale mapping in the Borikoppalu sector, where the supposed Sargur rocks with ENE ‘trend’ abut against the N-‘trending’ rocks of the Dharwar Supergroup, shows a continuity of rock formations and structures across the hinge of a large-scaleF 2 fold. This observation renders the notion, that there is an angular unconformity here between the rocks of the Sargur Group and the Dharwar Supergroup, untenable.  相似文献   

8.
Three major episodes of folding are evident in the Eastern Ghats terrain. The first and second generation folds are the reclined type; coaxial refolding has produced hook-shaped folds, except in massif-type charnockites in which non-coaxial refolding has produced arrow head folds. The third generation folds are upright with a stretching lineation parallel to subhorizontal fold axes. The sequence of fold stylesreclinedF 1and coaxialF 2, clearly points to an early compressional regime and attendant progressive simple shear. Significant subhorizontal extension duringF 3folding is indicated by stretching lineation parallel to subhorizontal fold axes. In the massif-type charnockites low plunges ofF 2folds indicate a flattening type of deformation partitioning in the weakly foliated rocks (magmatic ?). The juxtaposition of EGMB against the Iron Ore Craton of Singhbhum by oblique collision is indicative of a transpressional regime.  相似文献   

9.
Marble, calc-silicate rock, quartzite and mica schist of Precambrian age in the ‘main Raialo syncline’ in the Udaipur district of central Rajasthan, India, have been affected by folding of four main generations (F1–F4), the first two of which are seen in the scale of map to microsection. The very tight to isoclinal F1 folds with long limbs and thickened hinges are generally reclined or inclined, and plunge gently castward or westward where least reoriented. The axial planes of the F1 folds have been involved in upright warps on east-west axes (F1′), nearly coaxial with the F1 folds, in some sectors. These folds have been overprinted by upright F2 folding of varying tightness with the axial planes striking north to northeast, resulting in interference patterns of different types in all scales. A penetrative axial plane foliation related to F1 folding and a crenulation cleavage parallel to the F2 axial pianes are seen in the micaceous rocks. Two sets of conjugate folds and kink bands of smail scale have been superimposed on the F1–F2 folds in thinly foliated rocks. The first of these sets (F3) has its conjugate axial planes dipping gently northeast and southwest, whereas the paired axial planes of the later set (F4) are vertical with north-northwest and east-west strikes.  相似文献   

10.
Transpressional deformation has played an important role in the late Paleozoic evolution of the western Central Asian Orogenic Belt (CAOB), and understanding the structural evolution of such transpressional zones is crucial for tectonic reconstructions. Here we focus on the transpressional Irtysh Shear Zone with an aim at understanding amalgamation processes between the Chinese Altai and the West/East Junggar. We mapped macroscopic fold structures in the southern Chinese Altai and analyzed their relationships with the development of the adjacent Irtysh Shear Zone. Structural observations from these macroscopic folds show evidence for four generations of folding and associated fabrics. The earlier fabric (S1), is locally recognized in low strain areas, and is commonly isoclinally folded by F2 folds that have an axial plane orientation parallel to the dominant fabric (S2). S2 is associated with a shallowly plunging stretching lineation (L2), and defines ∼NW-SE tight-close upright macroscopic folds (F3) with the doubly plunging geometry. F3 folds are superimposed by ∼NNW-SSE gentle F4 folds. The F3 and F4 folds are kinematically compatible with sinistral transpressional deformation along the Irtysh Shear Zone and may represent strain partitioning during deformation. The sub-parallelism of F3 fold axis with the Irtysh Shear Zone may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation (F3) in fold zones. The strain partitioning may have become less efficient in the later stage of transpressional deformation, so that a fraction of transcurrent components was partitioned into F4 folds.  相似文献   

11.
During the refolding of an early non-isoclinal fold (say,F 1) we may find an offset or side-stepping of the axial surfaces of the later folds (say,F 2). The offsets can be seen in both type 2 and type 3 interference patterns. An analysis of the shear fold model shows that there is a maximum limit for the magnitude of side-stepping. The side-stepping is larger for larger interlimb angles ofF 1. It decreases with progressive tightening ofF 2. By recognizing such side-stepping we can predict on which side the F1 hinge should lie even if the hinge is unexposed or lies outside the domain of observation. The general rule for the sense of side-stepping is the same for shear folds, flexural slip folds and buckling folds. However, the side-stepping in buckling folds should be used with caution, sinceF 2 folds on buckled single-layers may show an offset whose sense is opposite to that predicted by the general rule.  相似文献   

12.
The NW–SE Irtysh Shear Zone is a major tectonic boundary in the Central Asian Orogenic Belt (CAOB), which supposedly records the amalgamation history between the peri-Siberian orogenic system and the Kazakhstan/south Mongolia orogenic system. However, the tectonic evolution of the Irtysh Shear Zone is not fully understood. Here we present new structural and geochronological data, which together with other constraints on the timing of deformation suggests that the Irtysh Shear Zone was subjected to three phases of deformation in the late Paleozoic. D1 is locally recognized as folded foliations in low strain areas and as an internal fabric within garnet porphyroblasts. D2 is represented by a shallowly dipping fabric and related ∼ NW–SE stretching lineations oriented sub-parallel to the strike of the orogen. D2 foliations are folded by ∼ NW–SE folds (F3) that are bounded by a series of mylonite zones with evidence for sinistral/reverse kinematics. These fold and shear structures are kinematically compatible, and thus interpreted to result from a transpressional deformation phase (D3). Two samples of mica schists yielded youngest detrital zircon peaks at ∼322 Ma, placing a maximum constraint on the timing of D1–D3 deformation. A ∼ NE–SW granitic dyke swarm (∼252 Ma) crosscuts D3 fold structures and mylonitic fabrics in the central part of the shear zone, but is displaced by a mylonite zone that represents the southern boundary of the Irtysh Shear Zone. This observation indicates that the major phase of D3 transpressional deformation took place prior to ∼252 Ma, although later phases of reactivation in the Mesozoic and Cenozoic are likely. The late Paleozoic deformation (D1–D3 at ∼322–252 Ma) overlaps in time with the collision between the Chinese Altai and the intra-oceanic arc system of the East Junggar. We therefore interpret that three episodes of late Paleozoic deformation represent orogenic thickening (D1), collapse (D2), and transpressional deformation (D3) during the convergence between the Chinese Altai and the East Junggar. On a larger scale, late Paleozoic sinistral shearing (D3), together with dextral shearing farther south, accommodated the eastward migration of internal segments of the western CAOB, possibly associated with the amalgamation of multiple arc systems and continental blocks during the late Paleozoic.  相似文献   

13.
Along active margins, tectonic features that develop in response to plate convergence are strongly controlled by subduction zone geometry. In West Junggar, a segment of the giant Palaeozoic collage of Central Asia, the West Karamay Unit represents a Carboniferous accretionary complex composed of fore-arc sedimentary rocks and ophiolitic mélanges. The occurrence of quasi-synchronous upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the West Junggar. Latest Carboniferous (ca. 300 Ma) alkaline plutons postdate this early phase of folding, which was synchronous with accretion of the Carboniferous complex. The Permian Dalabute sinistral fault overprints Carboniferous ductile shearing and split the West Karamay Unit ca. 100 km apart. Oblique convergence may have been provoked by the buckling of the Kazakh orocline and relative rotations between its segments. Depending upon the shape of the convergence zone, either upright folds and fold with vertical axes, or alternatively, strike–slip brittle faults developed in response to strain partitioning. Sinistral brittle faulting may account for the lateral imbrication of units in the West Junggar accretionary complex.  相似文献   

14.
Inliers of 1.0–1.3 Ga rocks occur throughout Mexico and form the basement of the Oaxaquia microcontinent. In the northern part of the largest inlier in southern Mexico, rocks of the Oaxacan Complex consist of the following structural sequence of units (from bottom to top), which protolith ages are: (1) Huitzo unit: a 1012±12 Ma anorthosite–mangerite–charnockite–granite (AMCG) suite; (2) El Catrı́n unit: ≥1350 Ma orthogneiss migmatized at 1106±6 Ma; and (3) El Marquez unit: ≥1140 Ma para- and orthogneisses. These rocks were affected by two major tectonothermal events that are dated using U–Pb isotopic analyses of zircon: (a) the 1106±6 Ma Olmecan event produced a migmatitic or metamorphic differentiation banding folded by isoclinal folds; and (b) the 1004–978±3 Ma Zapotecan event produced at least two sets of structures: (Z1) recumbent, isoclinal, Class 1C/3 folds with gently NW-plunging fold axes that are parallel to mineral and stretched quartz lineations under granulite facies metamorphism; and (Z2) tight, upright, subhorizontal WNW- to NNE-trending folds accompanied by development of brown hornblende at upper amphibolite facies metamorphic conditions. Cooling through 500 °C at 977±12 Ma is documented by 40Ar/39Ar analyses of hornblende. Fold mechanisms operating in the northern Oaxacan Complex under Zapotecan granulite facies metamorphism include flexural and tangential–longitudinal strain accompanied by intense flattening and stretching parallel to the fold axes. Subsequent Phanerozoic deformation includes thrusting and upright folding under lower-grade metamorphic conditions. The Zapotecan event is widespread throughout Oaxaquia, and took crustal rocks to a depth of 25–30 km by orogenic crustal thickening, and is here designated as Zapotecan Orogeny. Modern analogues for Zapotecan granulite facies metamorphism and deformation occur in middle to lower crustal portion of subduction and collisional orogens. Contemporaneous tectonothermal events took place throughout Oaxaquia, and in various parts of the Genvillian orogen in Laurentia and Amazonia.  相似文献   

15.
Granulites are developed in various tectonic settings and during different geological periods, and have been used for continental correlation within supercontinent models. In this context the Balaram-Kui-Surpagla-Kengora granulites of the South Delhi Terrane of the Aravalli Mobile Belt of northwestern India are significant. The granulites occur as shear zone bounded lensoidal bodies within low-grade rocks of the South Delhi Terrane and comprise pelitic and calcareous granulites, a gabbro-norite-basic granulite suite and multiple phases of granites of the Ambaji suite. The granulites have undergone three major phases of folding and shearing. The F1 and F2 folds are coaxial along NE-SW axis, and F3 folds are developed across the former along NW-SE axis. Thus, various types of interference patterns are produced. The granulite facies metamorphism is marked by a spinel–cordierite–garnet–sillimanite–quartz assemblage with melt phase and is synkinematic to the F1 phase of folding. The peak thermobarometric condition is set at ≥850 °C and 5.5–6.8 kb. The granulites have been exhumed through thrusting along multiple ductile shear zones during syn- to post-F2 folding. Late-stage shearing has produced cataclasites and pseudotachylites. Sensitive High Resolution Ion MicroProbe (SHRIMP) U–Pb dating of zircon from pelitic granulites and synkinematically emplaced granites indicate that: (1) the sedimentary succession of the South Delhi Terrane was deposited between 1240 and 860 Ma with detritus derived from magmatic sources with ages between 1620 and 1240 Ma; (2) folding and granulite metamorphism have taken place between ca. 860 and 800 Ma, and exhumation at around ca. 800–760 Ma; and (3) the last phase of granitic activity occurred at ca. 759 Ma. This shows, for the first time, that the granulites of the South Delhi Terrane are much younger than those of the Sandmata Granulite Complex of the northern part of the Aravalli Mobile Belt, the Saussar granulites of the Central India Mobile Belt and the Eastern Ghats Mobile Belt. Instead, they show similarities to the Neoproterozoic granulites of the Circum Indian Orogens that include the East African Orogen (East Africa and Madagascar), the Southern Granulite Terrane of India and much of Sri Lanka. We suggest that the South Delhi Basin probably marks a trace of the proto-Mozambique Ocean in NW India within Gondwana, that closed when the Marwar Craton, arc fragments (Bemarivo Belt in Madagascar and the Seychelles) and components of the Arabian-Nubian Shield collided with the Aravalli-Bundelkhand Protocontinent at ca. 850–750 Ma.  相似文献   

16.
The Beit Bridge Complex of the Central Zone (CZ) of the Limpopo Belt hosts the 519 ± 6 Ma Venetia kimberlite diatremes. Deformed shelf- or platform-type supracrustal sequences include the Mount Dowe, Malala Drift and Gumbu Groups, comprising quartzofeldspathic units, biotite-bearing gneiss, quartzite, metapelite, metacalcsilicate and ortho- and para-amphibolite. Previous studies define tectonometamorphic events at 3.3–3.1 Ga, 2.7–2.5 Ga and 2.04 Ga. Detailed structural mapping over 10 years highlights four deformation events at Venetia. Rules-based implicit 3D modelling in Leapfrog Geo™ provides an unprecedented insight into CZ ductile deformation and sheath folding. D1 juxtaposed gneisses against metasediments. D2 produced a pervasive axial planar foliation (S2) to isoclinal F2 folds. Sheared lithological contacts and S2 were refolded into regional, open, predominantly southward-verging, E–W trending F3 folds. Intrusion of a hornblendite protolith occurred at high angles to incipient S2. Constrictional-prolate D4 shows moderately NE-plunging azimuths defined by elongated hornblendite lenses, andalusite crystals in metapelite, crenulations in fuchsitic quartzite and sheath folding. D4 overlaps with a: 1) 2.03–2.01 Ga regional M3 metamorphic overprint; b) transpressional deformation at 2.2–1.9 Ga and c) 2.03 Ga transpressional, dextral shearing and thrusting around the CZ and d) formation of the Avoca, Bellavue and Baklykraal sheath folds and parallel lineations.  相似文献   

17.
The Eastern Lesser Himalayan fold-thrust belt is punctuated by a row of orogen-transverse domal tectonic windows. To evaluate their origin, a variety of thrust-stack models have been proposed, assuming that the crustal shortening occurred dominantly by brittle deformations. However, the Rangit Window (RW) in the Darjeeling-Sikkim Himalaya (DSH) shows unequivocal structural imprints of ductile deformations of multiple episodes. Based on new structural maps, coupled with outcrop-scale field observations, we recognize at least four major episodes of folding in the litho-tectonic units of DSH. The last episode has produced regionally orogen-transverse upright folds (F4), the interference of which with the third-generation (F3) orogen-parallel folds has shaped the large-scale structural patterns in DSH. We propose a new genetic model for the RW, invoking the mechanics of superposed buckling in the mechanically stratified litho-tectonic systems. We substantiate this superposed buckling model with results obtained from analogue experiments. The model explains contrasting F3–F4 interferences in the Lesser Himalayan Sequence (LHS). The lower-order (terrain-scale) folds have undergone superposed buckling in Mode 1, producing large-scale domes and basins, whereas the RW occurs as a relatively higher-order dome nested in the first-order Tista Dome. The Gondwana and the Proterozoic rocks within the RW underwent superposed buckling in Modes 3 and 4, leading to Type 2 fold interferences, as evident from their structural patterns.  相似文献   

18.
The three-dimensional exposures of the Sierra Blanca marbles and neighbouring rocks in the western Betic cordillera of the south of Spain show tight to isoclinal F3 folds re-folded by a larger sheath-like structure. The relationships between both structures are as follows: (1) The mean axial surface for Sierra Blanca sheath fold can be defined as the great circle of best fit through the ß-axes of sub-cylindrical F3 folding domains. (2) The asymmetric F3-folds indicate a single mainly eastward normal sense of shear. (3) The mean attitude of the axial-plane crenulation foliation, Sc, is also sub-parallel to the mean axial surface for Sierra Blanca sheath fold. The regional context of the Sierra Blanca sheath fold is finally discussed, and a model of a heterogeneous high-strain extensional zone proposed.  相似文献   

19.
The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S 1) axial planar to a phase of isoclinal folding (F 1). The lineations which parallel the hinges ofF 1 folds are deformed by a set of folds (F 2) having vertical or very steep axial planes. At many places a crenulation cleavage (S 2) has developed subparallel to the axial planes ofF 2 folds, particularly in the psammopelitic rocks. The plunge and trend ofF 2 folds vary widely over the area. Deformation ofF 2 folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F 3) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F 4), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F 5). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF 3 onF 2.F 1 folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F2 feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF 1 structures, resulting in the formation of tight and isoclinal antiforms (F 2) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF 2 isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF 2 movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF 2 folding over a large part of the area. Further, the virtually coaxial nature ofF 2 andF 3 folds and the refolding ofF 3 folds by a new set of N-S folds is an indication of continuous progressive deformation.  相似文献   

20.
The composite Zhaheba ophiolite complex, exposed in Eastern Junggar in the Southern Altaids, records an unusually long record of oceanic crust and magmatic arc evolution. The Zhaheba ophiolite complex consists of ultramafic rocks, gabbro, diorite, basalt and chert intruded by diabase dikes and diorite porphyry. These rocks are overlain by a several-km-thick section of tuffaceous rocks, volcaniclastic sedimentary rocks, and intermediate volcanic rocks. The igneous rocks of the ophiolite complex show negative Nb and Ta anomalies and LREE enrichment relative to HREE, suggesting the influence of fluids derived from a subducting oceanic slab. The LA-ICPMS U–Pb age of zircons from gabbro is 495.1 ± 3.5 Ma. Zircon ages from diorite and basalt are 458.3 ± 7.2 Ma and 446.6 ± 6.0 Ma, respectively. The basalt is locally overlain by bedded chert. Diabase dikes and diorite porphyry yield the U–Pb ages of 421.5 ± 4.1 Ma and 423.7 ± 6.5 Ma, respectively. The age of stratigraphically lower part of the overlying volcanic–volcaniclastic section is constrained to be about 410 Ma, the maximum depositional age of the tuffaceous sandstone from U–Pb detrital zircon ages. Late rhyolite at the top of the stratigraphic section yielded a U–Pb zircon age of 280.3 ± 3.7 Ma. The age and stratigraphic relationships for the Zhaheba ophiolite complex and related rocks suggest that the period of ~ 70 Ma of initial supra-subduction magmatism was followed by construction of a mature island arc that spanned an additional 140 Ma. Many other ophiolites in the southern Altaids appear to record similar relationships, and are represented as substrates of oceanic island arcs covered by island arc volcanism in supra-subduction zone. The occurrence of the Zhaheba ophiolite complex with tuffaceous and intermediate to felsic volcanic rocks is different from the rock association of classic Tethyan SSZ ophiolites but similar to some ophiolites in North America. Although the Zhaheba ophiolite belt is flanked by the Dulate arc in the north and Yemaquan arc in the south, it cannot stand a suture between two arcs. It is suggested that Devonian–Carboniferous Dulate arc was built on the late Cambrian–middle Ordovician Zhaheba supra-subduction oceanic crust. The late Carboniferous rocks and early Permian rocks in Dulate arc are interpreted to form in the extensional process within Zhaheba–Dulate arc composite system.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号