共查询到20条相似文献，搜索用时 15 毫秒
1.
This paper presents a strain-rate dependent plastic constitutive model for clays. Based on the concepts of critical-state soil mechanics and bounding surface plasticity theory, the model reproduces the mechanical response of clays under triaxial and simple shear loading conditions. The model parameters are determined for Boston Blue Clay, London Clay and Kaolin Clay, and the performance of the model in simulating the mechanical response of these clays is demonstrated for low to medium strain rates. The sensitivity of each model parameter is checked by perturbing the calibrated values by ±20 %. Subsequently, a probabilistic analysis using Monte Carlo simulations is performed by treating the model parameters as random variables and the impact of the statistics of the parameters on the undrained shear strength is investigated. 相似文献
2.
This paper presents a two-surface plasticity constitutive model based on critical-state soil mechanics and describes a practical process for the determination of its parameters. Determination of the constitutive model parameters can be done in a hierarchical manner, starting with the model parameters that have the most bearing on sand behavior and that can be determined using routine experimental procedures. Most parameters can be determined through simple curve fitting through experimental data points. The constitutive model is calibrated against experimental data for Toyoura sand, clean Ottawa sand and mixtures of Ottawa sand with non-plastic silt. The model simulates closely the mechanical response of sands under various loading conditions and predicts both drained and undrained behavior of sands at small and large strains using the actual small-strain shear modulus, as measured in resonant column or bender elements tests, along with realistic values of Poisson’s ratio. Performance of the model in simulating sand response is demonstrated for a variety of initial states and loading conditions. 相似文献
3.
A critical state model for overconsolidated structured clays 总被引：1，自引：0，他引：1
This paper presents a generalised critical state model with the bounding surface theory for simulating the stress–strain behaviour of overconsolidated structured clays. The model is formulated based on the framework of the Structured Cam Clay (SCC) model and is designated as the Modified Structured Cam Clay with Bounding Surface Theory (MSCC-B) model. The hardening and destructuring processes for structured clays in the overconsolidated state can be described by the proposed model. The image stress point defined by the radial mapping rule is used to determine the plastic hardening modulus, which varies along loading paths. A new proposed parameter h, which depends on the material characteristics, is introduced into the plastic hardening modulus equation to take the soil behaviour into account in the overconsolidated state. The MSCC-B model is finally evaluated in light of the model performance by comparisons with the measured data of both naturally and artificially structured clays under compression and shearing tests. From the comparisons, it is found that the MSCC-B model gives reasonable good simulations of mechanical response of structured clays in both drained and undrained conditions. With its simplicity and performance, the MSCC-B model is regarded as a practical geotechnical model for implementation in numerical analysis. 相似文献
4.
基于试验基础上建立的经典弹塑性模型--剑桥模型能够准确描述正常固结土的应力-应变关系。当土体的应力历史上经历过卸载或受到循环交变荷载作用即进入超固结状态,它作为土的应力历史的反映,相比正常固结土受力特性有着显著的差异。为研究超固结因素对土体加载特性的影响,在引入能考虑超固结状态影响的下负荷面剑桥模型后,通过三轴压缩和剪切试验对处于超固结状态下土体的受力特性进行了对比分析,并对循环剪切加载下的应力-应变关系以及超固结比的演化规律进行了研究。结果表明,下负荷面剑桥模型能准确反映超固结因素对土体力学特性的影响,相比原状土有着更高的屈服强度。而通过数值模拟自由场地基在地震作用下的动力响应可以看出,超固结因素对地基的动力响应起到了不可忽略的影响,尤其在强震下更需要考虑其影响。在自由场地基地震动力响应基础上,通过对桩柱结构桩-土耦合系统在地震作用下非线性动力响应的模拟对土体非线性以及超固结因素的影响进行了对比研究,研究表明：土体的非线性因素能显著降低结构振动响应中的高频成分,由于土体在交变加载下很快进入超固结状态,相对于剑桥模型,下负荷面剑桥模型在考虑超固结因素后土体的承载性能显著提高,尤其在强震作用下超固结因素带来的影响更加明显,因此,建议对桩基结构物地震响应研究考虑超固结因素影响,以提高桩基结构物地震响应模拟的精确度和可靠性。 相似文献
5.
This paper describes a constitutive approach to model the behavior of rate‐dependent anisotropic structured clay. Rate‐sensitivity is modeled using overstress viscoplasticity. Clay structure is treated as a viscous phenomenon whereby the viscosity of the undisturbed structured clay is initially very high and the viscosity degrades or decreases with plastic straining until the intrinsic or residual viscosity is reached. A microstructure tensor approach is used to make the structured viscosity anisotropic; whereas, the intrinsic viscosity is assumed to be isotropic. The behavior of the constitutive model is compared with the measured response of two clays (Gloucester and St. Vallier clay) from Eastern Canada during triaxial compression tests on specimens trimmed at different orientations to the vertical. The comparisons show that the constitutive framework is able to describe the anisotropic and rate‐sensitive response of both clays. The response of the model is also examined for the more general case of anisotropic consolidated triaxial compression and extension. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
6.
7.
Simulation of cyclic strength degradation of natural clays via bounding surface model with hybrid flow rule 
下载免费PDF全文
下载免费PDF全文 Strength loss of natural clays subjected to seismic loading is a critical factor contributing to earthquake‐induced ground failure and associated hazards. This work proposes a bounding surface constitutive law to simulate cyclic strength degradation of natural clays resulting from the loss of structure and attendant accumulation of excess pore pressures. The proposed model employs an enhanced plastic flow rule that can simulate accurately the development of pore pressure and explicitly incorporates soil structure effects. The validation of the model with reference to the experimental evidence available for 3 structured clays shows that with a single set of parameters the proposed model can reasonably represent the mechanical behavior of natural clays under various loading conditions (1D compression, monotonic shearing in compression and extension, cyclic loading, and postcyclic shearing). Particularly, its satisfactory performance in terms of quantification of cyclic strength degradation encourages the use of the model in simulating boundary value problems related to the stability of geotechnical facilities under earthquakes. 相似文献
8.
H. S. Yu 《国际地质力学数值与分析法杂志》1998,22(8):621-653
The purpose of this paper is to present a simple, unified critical state constitutive model for both clay and sand. The model, called CASM (Clay And Sand Model), is formulated in terms of the state parameter that is defined as the vertical distance between current state (v, p′) and the critical state line in v–ln p′ space. The paper first shows that the standard Cam-clay models (i.e. the original and modified Cam-clay models) can be reformulated in terms of the state parameter. Although the standard Cam-clay models prove to be successful in modelling normally consolidated clays, it is well known that they cannot predict many important features of the behavior of sands and overconsolidated clays. By adopting a general stress ratio-state parameter relation to describe the state boundary surface of soils, it is shown that a simple, unified constitutive model (CASM) can be developed for both clay and sand. It is also demonstrated that the standard Cam-clay yield surfaces can be either recovered or approximated as special cases of the yield locus assumed in CASM. The main feature of the proposed model is that a single set of yield and plastic potential functions has been used to model the behaviour of clay and sand under both drained and undrained loading conditions. In addition, it is shown that the behaviour of overconsolidated clays can also be satisfactorily modelled. Simplicity is a major advantage of the present state parameter model, as only two new material constants need to be introduced when compared with the standard Cam-clay models. © 1998 John Wiley & Sons, Ltd. 相似文献
9.
This paper presents a kinematic hardening model for describing some important features of natural stiff clays under cyclic loading conditions, such as closed hysteretic loops, smooth transition from the elastic behavior to the elastoplastic one and changes of the compression slope with loading/unloading loops. The model includes two yield surfaces, an inner surface and a bounding surface. A non-associated flow rule and a kinematic hardening law are proposed for the inner surface. The adopted hardening law enables the plastic modulus to vary smoothly when the kinematic yield surface approaches the bounding surface and ensures at the same time the non-intersection of the two yield surfaces. Furthermore, the first loading, unloading, and reloading stages are treated differently by applying distinct hardening parameters. The main feature of the model is that its constitutive equations can be simply formulated based on the consistency condition for the inner yield surface based on the proposed kinematic hardening law; thereby, this model can be easily implemented in a finite element code using a classic stress integration scheme as for the modified Cam Clay model. The simulation results on the Boom Clay, natural stiff clay, have revealed the relevance of the model: a good agreement has been obtained between simulations and the experimental results from the tests with different stress paths under cyclic loading conditions. In particular, the model can satisfactorily describe the complex case of oedometric conditions where the deviator stress is positive upon loading (compression) but can become negative upon unloading (extension). 相似文献
10.
This paper presents a generalised constitutive model for destructured, naturally structured and artificially structured clays that extends the Structured Cam Clay (SCC) model. This model is designated as “Modified Structured Cam Clay (MSCC) model”. The influence of structure and destructuring on the mechanical behaviour of clay can be explained by the change in the modified effective stress, which is the sum of the current mean effective stress and the additional mean effective stress due to structure (structure strength). The presence of structure increases the modified mean effective stress and yield surface, enhancing the cohesion, peak strength and stiffness. The destructuring begins when the stress state is on the virgin yield surface. After the failure (peak strength) state, the abrupt destructuring occurs as the soil–cementation structure is crushed; hence the strain softening. The soil structure is completely removed at the critical state when the yield surface becomes identical to the destructured surface. The destructuring law is proposed based on this premise. In the MSCC model, the yield function is the same shape as that of the Modified Cam Clay (MCC) model. A plastic potential is introduced so as to account for the influence of structure on the plastic strain direction for both hardening and softening behaviours. The required model parameters are divided into those describing destructured properties and those describing structured properties. All the parameters have physical meaning and can be simply determined from the conventional triaxial tests. Thus, the MSCC model is a useful tool for geotechnical practitioners. The capability of the model is verified by the test results of destructured, natural structured and artificially structured clays. 相似文献
11.
土结构性是土结构空间排列几何特征和联结特征所表现出的力学性质,是影响土力学特性的重要内在因素。它与土的密度、粒度、湿度相联系,能够综合反映土的强度、变形等力学特性的变化和发展。从综合反映增湿导致土结构内在主动变化和加载变形导致土结构被动变化两个方面出发,沿用土综合结构势的应力比结构性参数,首先建立压缩、剪切及增湿作用下黄土的结构性演化规律;其次,通过压剪湿作用下黄土的应力-应变特性、屈服破坏特性及其与结构性之间的关系,揭示结构性变化对土力学性质的影响;进而,建立了反映压剪湿作用下黄土结构性发展演化的湿载结构性本构模型。最后通过与试验数据、修正剑桥模型的比较分析,初步验证该模型的准确性。 相似文献
12.
Wheeler, Sharma and Buisson proposed an elasto‐plastic constitutive model for unsaturated soils that couples the mechanical and water retention behaviours. The model was formulated for isotropic stress states and adopts the mean Bishop's stress and modified suction as stress state variables. This paper deals with the extension of this constitutive model to general three‐dimensional stress conditions, proposing the generalized stress–strain relationships required for the numerical integration of the constitutive model. A characteristic of the original model is the consideration of a number of elasto‐plastic mechanisms to describe the complex behaviour of unsaturated soils. This work presents the three‐dimensional formulation of these coupled irreversible mechanisms in a generalized way including anisotropic loading. The paper also compares the results from the model with published experiments performed under different loading conditions. The response of the model is very satisfactory in terms of both mechanical and water retention behaviours. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
13.
14.
Deep clays exhibit a pronounced strain anisotropy both during mechanical loading as well as during heating and cooling at constant stress in drained isotropic conditions. During mechanical loading vertical strain is larger than the horizontal one. During heating the vertical strain is larger than the horizontal one within the elastic range; the opposite is observed in the elasto-plastic range. The above described response can be interpreted adopting a consistent rotational, kinematic hardening thermo-elasto-plastic constitutive law. 相似文献
15.
A two-surface plasticity model for stiff clay 总被引：1，自引：1，他引：0
This paper presents a constitutive model for describing some important features of the behavior of natural stiff clay evidenced experimentally such as the limited elastic zone, the presence of strain hardening and softening, and the smooth transition from elastic behavior to a plastic one. The model, namely ACC-2, is an adapted Modified Cam Clay model with two yield surfaces: similarly to bounding surface plasticity theory, an additional yield surface—namely Inner yield surface—was adopted to account for the plastic behavior inside the conventional yield surface. A progressive plastic hardening mechanism was introduced with a combined volumetric-deviatoric hardening law associated with the Inner yield surface, enabling the plastic modulus to vary smoothly during loading paths. The main feature of the proposed model is that its constitutive equations can be simply formulated based on the consistency condition for the Inner yield surface, so that it can be efficiently implemented in a finite element code using a stress integration scheme similar to that of the Modified Cam Clay model. Furthermore, it is proved to be an appropriate model for natural stiff clay: the simulations of a set of tests along different mechanical loading paths on natural Boom Clay show good agreement with the experimental results. 相似文献
16.
土体的本构模型是分析计算土工结构变形规律的关键。自剑桥模型提出以来,对于土体本构模型的研究,各国学者在不同环境条件下发展研究了适用于相应试验条件下的各类模型。随着寒区经济的发展,关于冻土力学性质的研究日益增多,许多学者借鉴常规融土的研究方法建立了不同条件下的冻土弹塑性本构模型。为了进一步理清冻土变形行为的特征,完善适用于冻土弹塑性行为的本构模拟理论和方法,作者总结和分析了各类冻土弹塑性本构模型的理论基础、建模方法、参数确定方法等内容,对进一步发展可准确描述冻土复杂力学行为的本构模型具有指导意义。 相似文献
17.
The structural deformation in clays results from microscopic phenomena involving the mechanical contact-stress change, the physico-chemical variation of repulsive forces in expansive clays, and thermal dilatancy of macropores. These textural strains are associated to three plastic mechanisms represented by respectively the yield surfacesfTm, fR-A andfT. Under a thermal cycle, the sizes of interlamellar spaces between clay platelets are not modified, hence the temperature cycle is expected to have no effect on repulsive forces and thus the second mechanism is not affected by temperature changes.
This paper suggests a formulation of a model of thermo-elasto-plastic behaviour of non-expansive saturated clays characterised by two plastic mechanisms. The mechanical yield surfacefTm of the contact-stress mechanism is based on a modified cam-clay model; the thermal softening yield surfacefT is a plane separating two thermal domains. In normally consolidated conditions, the resulting response to an increase of temperature is compressive. However, in highly overconsolidated conditions, a small irreversible dilative volumetric strain is observed when the temperature is above a threshold value. In intermediate conditions, the material starts with an expansion and tends to a compression.
The constitutive model combines thermo-mechanical hardening, predominant in normally consolidated states (NCS) and absent in overconsolidated states (OCS) where the thermal softening occurs. The characterisation of the model requires information about rheological parameters obtained from oedometric and triaxial paths. Lastly, some numerical simulations of thermo-mechanical tests onremoulded Boom, ‘Bassin Parisien’ andPontida clays are presented, which show satisfactory agreement between experiments and model predictions. 相似文献
18.
The performance of several soil constitutive models was evaluated by comparing experimental results and simulated behavior of a medium plasticity clay. Input parameters for the soil constitutive models were obtained from triaxial compression and extension tests on normally and overconsolidated medium plasticity clay. The soil models employed for this study were the Cam Clay, Modified Cam Clay, 3-SKH, and S-CLAY1 models. In order to investigate the influence of some of the input parameters on the performance of the models, sensitivity analyses were also performed. The comparisons demonstrate that the Cam Clay model was able to predict the normally consolidated compressive behavior of medium plasticity clay. Both 3-SKH and Cam Clay models were able to produce acceptable predictions for stress?Cstrain and stress path behavior for overconsolidated compression of the soil. The 3-SKH model did not perform satisfactorily for predicting pore pressure variations, while the Cam Clay model demonstrated fairly acceptable predictions. For the normally consolidated reduced extension test, the Modified Cam Clay and S-CLAY1 models performed better than the Cam Clay and 3-SKH models in predicting the stress?Cstrain curve, pore pressure variations, and stress path. 相似文献
19.
Acta Geotechnica - In this paper, an elastoplastic constitutive model is proposed to uniformly describe the mechanical behavior of cemented/ non-cemented soil under different loading conditions. A... 相似文献
20.
This paper aims to evaluate the performance of several recent constitutive models in simulating the thermo‐mechanical behaviour of saturated clays. A classic thermo‐mechanical test on natural Boom Clay, commonly used in constitutive modelling, was first clarified. Different methods commonly used to measure volumetric strain in drained heating tests were then discussed. Model evaluation was performed in terms of thermodynamic and elasto‐plastic requirements. The capability of the models to capture the observed behaviour was assessed on the basis of the experimental evidence. It was shown that all the models provide reasonable predictions of the thermo‐mechanical behaviour of saturated clays. However, each constitutive model has its own limitations or unclear points from the theoretical point of view. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献