首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 114 毫秒
1.
Scheelite-mineralized microtonalite sheets occur on the SE margin of the end-Caledonian Leinster Granite in SE Ireland. Scheelite, polymetallic sulphides and minor cassiterite occur in veins in the microtonalites, disseminated throughout the greisened microtonalite sheets and in the adjacent wallrocks. Two major mineralized vein types occur in the microtonalite sheets: (1) Scheelite ± arsenopyrite ± pyrrhotite occur in quartz-fluorite veins, generally without a muscovite selvage; (2) Sphalerite ± chalcopyrite ± pyrite ± galena ± cassiterite ± stannite occur in quartz + fluorite veins with a coarse muscovite selvage and are often intergrown with the muscovite. Quartz-hosted fluid inclusions were examined from representative samples of both vein types using petrographic, microthermometric and laser Raman spectroscopic techniques. Three distinct types of fluid inclusions have been recognized. Primary, vapour rich Type 1 inclusions in quartz from the scheelite-mineralized veins are of H2O-CO2-CH4-N2 ± H2S ± NaCl composition and formed between 360–530 °C. Primary and secondary, liquid-rich Type 2 fluid inclusions in the base metal sulphide-mineralized veins are of H2O-CH4-N2 ± H2S-NaCl composition and formed between 340–480 °C. They also occur as pseudosecondary and secondary inclusions in scheelite-mineralized veins. Late dilute, low temperature H2O-NaCl + KCl fluid inclusions may be related to late-Caledonian convection of meteoric waters around the cooling Leinster Granite batholith. Received: 4 September 1996 / Accepted: 23 May 1997  相似文献   

2.
The Bugdaya Au-bearing W-Mo porphyry deposit, Eastern Transbaikal Region, Russia, is located in the central part of volcanic dome and hosted in the large Variscan granitic pluton. In its characteristics, this is a Climax-type deposit, or an Mo porphyry deposit of rhyolitic subclass. The enrichment in gold is related to the relatively widespread vein and veinlet gold-base-metal mineralization. More than 70 minerals (native metals, sulfides, sulfosalts, tellurides, oxides, molybdates, wolframates, carbonates, and sulfates) have been identified in stockwork and vein ores, including dzhalindite, greenockite, Mo-bearing stolzite, Ag and Au amalgams, stromeyerite, cervelleite, and berryite identified here for the first time. Four stages of mineral formation are recognized. The earliest preore stage in form of potassic alteration and intense silicification developed after emplacement of subvolcanic rhyolite (granite) porphyry stock. The stockwork and vein W-Mo mineralization of the quartz-molybdenite stage was the next. Sericite alteration, pyritization, and the subsequent quartz-sulfide veins and veinlets with native gold, base-metal sulfides, and various Ag-Cu-Pb-Bi-Sb sulfosalts of the gold-base-metal stage were formed after the rearrangement of regional pattern of tectonic deformation. The hydrothermal process was completed by argillic (kaolinite-smectite) assemblage of the postore stage. The fluid inclusion study (microthermometry and Raman spectroscopy) allowed us to establish that the stockwork W-Mo mineralization was formed at 550–380°C from both the highly concentrated Mg-Na chloride solution (brine) and the low-density gas with significant N2 and H2S contents. The Pb-Zn vein ore of the gold-base-metal stage enriched in Au, Ag, Bi, and other rare metals was deposited at 360–140°C from a homogeneous Na-K chloride (hydrocarbonate, sulfate) hydrothermal solution of medium salinity.  相似文献   

3.
Tungsten ore at Carrock Fell Mine comprises wolframite and scheelite in polyminerallic quartz veins which traverse the Grainsgill Granite cupola and surrounding country rocks. In the veins, a wolframite-scheelite-apatite assemblage pre-dates a scheelite-arsenopyrite-pyrite (plus other sulphides) assemblages. Temperatures of mineralisation declined from a peak near 350°C to 170°C, and the hydrothermal fluid contained about 6 weight% NaCl and 3 wt% NaHCO3. Contemporaneous greisenisation involved loss of Na, Cr, Ca and Ba from granite, but Si and K were retained while B, Be and Al increased slightly. Sn also increased but is always a trace constituent, and F appears to have decreased. Zones of intense alteration contain high concentrations of quartzhosted fluid inclusions resulting from penetration of the granite by fluid chemically similar to that in the vein quartz. The W-rich, Sn-poor nature of the mineralisation may relate to the weakly saline, F-deficient but CO2-rich fluid chemistry. The alteration and mineralisation processes took place during late cooling of the Lower-Devonian Skiddaw Granite. Cross-cutting quartz-ankerite veins and argillitic zones which may be considerably younger than those producing the tungsten ore, have a distinct mineral suite lacking W and As and including major Pb and Zn. Temperatures at this late stage were below 150°C, and the fluid is estimated to have contained approximately 12 wt% NaCl and 15 wt% CaCl2.  相似文献   

4.
The Brandberg West region of NW Namibia is dominated by poly-deformed turbidites and carbonate rocks of the Neoproterozoic Damara Supergoup, which have been regionally metamorphosed to greenschist facies and thermally metamorphosed up to mid-amphibolite facies by Neoproterozoic granite plutons. The meta-sedimentary rocks host Damaran-age hydrothermal quartz vein-hosted Sn–W mineralization at Brandberg West and numerous nearby smaller deposits. Fluid inclusion microthermometric studies of the vein quartz suggests that the ore-forming fluids at the Brandberg West mine were CO2-bearing aqueous fluids represented by the NaCl–CaCl2–H2O–CO2 system with moderate salinity (mean=8.6 wt% NaClequivalent).Temperatures determined using oxygen isotope thermometry are 415–521°C (quartz–muscovite), 392–447°C (quartz–cassiterite), and 444–490°C (quartz–hematite). At Brandberg West, the oxygen isotope ratios of quartz veins and siliciclastic host rocks in the mineralized area are lower than those in the rocks and veins of the surrounding areas suggesting that pervasive fluid–rock interaction occurred during mineralization. The O- and H-isotope data of quartz–muscovite veins and fluid inclusions indicate that the ore fluids were dominantly of magmatic origin, implying that mineralization occurred above a shallow granite pluton. Simple mass balance calculations suggest water/rock ratios of 1.88 (closed system) and 1.01 (open system). The CO2 component of the fluid inclusions had similar δ 13C to the carbonate rocks intercalated with the turbidites. It is most likely that mineralization at Brandberg West was caused by a combination of an impermeable marble barrier and interaction of the fluids with the marble. The minor deposits in the area have quartz veins with higher δ 18O values, which is consistent with these deposits being similar geological environments exposed at higher erosion levels.  相似文献   

5.
In the Variscan foreland of SW-Sardinia (Western Mediterranean sea), close to the leading edge of the nappe zone, nappe emplacement caused folding and repetition of stratigraphic successions, km-scale offset of stratigraphic boundaries and an extensive brittle-ductile shear zone. Thrusts assumed a significant role, accommodating a progressive change of shortening direction and forming complicated thrust triangle zones. During thrust emplacement of the nappes, strong penetrative deformation affected rocks beneath the basal thrust of the nappe stack and produced coeval structures with both foreland-directed and hinterland-directed (backthrusting) shear sense. Cross-cutting and overprinting relationships clearly show that the shortening direction changed progressively from N–S to E–W, producing in sequence: (1) E–W trending open folds contemporaneous with early nappe emplacement in the nearby nappe zone; (2) recumbent, quasi-isoclinal folds with axial plane foliation and widespread, “top-towards-the-SW”, penetrative shearing; (3) N–S trending folds with axial plane foliation, contemporaneous with late nappe emplacement; (4) backthrusts and related asymmetrical folds developed during the final stages of shortening, postdating foreland-verging structures. Structures at (3) and (4) occurred during the same tectonic transport “top-towards-the-E” of the nappe zone over the foreland. The several generations of folds, thrusts, and foliations with different orientations developed, result in a complex finite structural architecture, not completely explicable by the theoretical model proposed up to date.  相似文献   

6.
Summary Based on mineral-chemical evidence we propose that the northernmost Scandian ultra-high pressure (UHP) metamorphic domain within the Western Gneiss Region of Norway can be extended 25 km northeastwards. A newly discovered, well preserved, fine-grained, Fe–Ti type garnet peridotite body at Svartberget, located in the Ulla Gneiss of the ‘M?re og Romsdal’ area north of Molde, is cut by a network of systematically orientated coarse-grained garnet-websterite and garnetite veins. Standard thermobarometric techniques based on electron microprobe analyses yield pressure (P) and temperature (T) estimates around 3.4 GPa, and 800 °C for the peridotite body and 5.5 GPa, and 800 °C for the websterite veins consistent with UHP conditions. In addition, polyphase solid inclusions, consisting of silicates, carbonates, sulphates and elemental carbon (including microdiamond), are randomly located in garnet and clinopyroxene of the websterite vein assemblage. Garnet-clinopyroxene mineral pairs yield a Sm–Nd cooling age of 393 ± 3 Ma for the peridotite and 381 ± 6 Ma for the vein assemblage suggesting that the Svartberget body was overprinted during the UHPM of the Scandian Orogeny. The initial ratio of the mineral isochron and Nd model ages suggest a mid-Proterozoic origin for the peridotite body. The polyphase inclusions, coupled with high 87Sr/86Sr ratios may indicate that the peridotite body was infiltrated by crustal-derived C–O–H melts/fluids at UHPM conditions to form the websterite veins in the diamond field. We propose that fracturing and vein emplacement were the result of local high fluid pressure during subduction of the Baltic plate. Present address: Physics of Geological Processes, University of Oslo, Oslo, Norway  相似文献   

7.
  Copper and subordinate molybdenum mineralization at Malanjkhand occurs within a fracture-controlled quartz-reef enclosed in a pink granitoid body surrounded by grey-granitoids constituting the regional matrix. Sulfide-bearing stringers, pegmatites with only quartz + microcline and sulfide disseminations, all within the pink-granitoid, represent other minor modes of occurrences. Despite this diversity in mode of occurrence, the mineralogy of ores is quite consistent and conform to a common paragenetic sequence comprising an early `ferrous' stage of precipitation of magnetite (I) and pyrite (I) and, the main-stage chalcopyrite mineralization with minor sphalerite, pyrite (II), magnetite (II), molybdenite and hematite. Both stages witnessed continuous precipitation of quartz ± microcline ± (chlorite, biotite and epidote). The enclosing pink-granitoid and the regional grey-granitoids display alteration features such as saussuritization of plagioclase, breakdown of hornblende and chloritization of biotite on a regional scale, indicating interaction with a pervasive fluid. Quartz and microcline precipitation mostly restricted within the pink granitoid, postdates this alteration. Four types of primary inclusions were encountered in quartz from ore samples: (1) type-I – aqueous-biphase(L + V) inclusions, the commonest variety in all ore types; (2) type-II – aqueous-carbonic(Laq + Lcarb ± Vcarb); (3) type-III – pure-carbonic(Lcarb ± Vcarb) – type-II and III being restricted to stringer and pegmatitic ores, and (4) rare polyphase (Laq + Vaq + calcite/gypsum) inclusions. Quartz in granitoids contain primary type-I inclusions only. Type-I inclusions from ore samples furnish a temperature range (after a rough pressure correction to the T H  -maxima of 140–180 °C) of 150–275 °C and a moderately low salinity of 4–12 wt.% NaCl equivalent. This is inferred to represent the signature of the major component (F2) of the ore fluid. A few type-I inclusions of higher T M (up to 380 °C) and low salinity and density represent the other (F1) identifiable component of the ore fluid present in low proportion. The T H  -maxima and the total range in salinity of type-I inclusions in quartz from granitoids are strikingly similar to those from the ore samples. Composition of syn-ore chlorites furnished a temperature range of 185–327 °C, which conforms to the fluid inclusion microthermometric data. Pressure estimates using standard fluid inclusion geobarometric methods, vary from 550 to 1790 bar in the stringer ores. Observed temperature-salinity/density relationships are best explained by a two-stage evolution model of the ore fluid: the first stage witnessed mixing of the two components, F1 and F2 in unequal proportion, bringing about mineralization. The second stage of evolution was marked by the separation of a carbonic component on continued sulfide precipitation and attendant increase in salinity of the fluid. The F1 component emerged as a distinct, heated and (CO2 + S)-charged entity due to steam-heating and contamination of the early-ingressed F2 fluid at the fracture zone. The pervasive fluid phase in the surrounding granitoids contributed the F2 component. Received: (10 August 1994), 15 August 1995 / Accepted: 12 January 1996  相似文献   

8.
The Sar-Cheshmeh porphyry Cu–Mo deposit is located in Southwestern Iran (65 km southwest of Kerman City) and is associated with a composite Miocene stock, ranging in composition from diorite through granodiorite to quartz-monzonite. Field observations and petrographic studies demonstrate that the emplacement of the Sar-Cheshmeh stock took place in several pulses, each with associated hydrothermal activity. Molybdenum was concentrated at a very early stage in the evolution of the hydrothermal system and copper was concentrated later. Four main vein Groups have been identified: (I) quartz+molybdenite+anhydrite±K-feldspar with minor pyrite, chalcopyrite and bornite; (II) quartz+chalcopyrite+pyrite±molybdenite±calcite; (III) quartz+pyrite+calcite±chalcopyrite±anhydrite (gypsum)±molybdenite; (IV) quartz±calcite±gypsum±pyrite±dolomite. Early hydrothermal alteration produced a potassic assemblage (orthoclase-biotite) in the central part of the stock, propylitic alteration occurred in the peripheral parts of the stock, contemporaneously with potassic alteration, and phyllic alteration occurred later, overprinting earlier alteration. The early hydrothermal fluids are represented by high temperature (350–520 °C), high salinity (up to 61 wt% NaCl equivalent) liquid-rich fluid inclusions, and high temperature (340–570 °C), low-salinity, vapor-rich inclusions. These fluids are interpreted to represent an orthomagmatic fluid, which cooled episodically; the brines are interpreted to have caused potassic alteration and deposition of Group I and II quartz veins containing molybdenite and chalcopyrite. Propylitic alteration is attributed to a liquid-rich, lower temperature (220–310 °C), Ca-rich, evolved meteoric fluid. Influx of meteoric water into the central part of the system and mixing with magmatic fluid produced albitization at depth and shallow phyllic alteration. This influx also caused the dissolution of early-formed copper sulphides and the remobilization of Cu into the sericitic zone, the main zone of the copper deposition in Sar-Cheshmeh, where it was redeposited in response to a decrease in temperature.  相似文献   

9.
At Colquijirca, central Peru, a predominantly dacitic Miocene diatreme-dome complex of 12.4 to 12.7 Ma (40Ar/39Ar biotite ages), is spatially related to two distinct mineralization types. Disseminated Au–(Ag) associated with advanced argillic alteration and local vuggy silica typical of high- sulfidation epithermal ores are hosted exclusively within the volcanic center at Marcapunta. A second economically more important mineralization type is characterized as "Cordilleran base metal lode and replacement deposits." These ores are hosted in Mesozoic and Cenozoic carbonate rocks surrounding the diatreme-dome complex and are zoned outward from pyrite–enargite–quartz–alunite to pyrite–chalcopyrite–dickite–kaolinite to pyrite–sphalerite–galena–kaolinite–siderite. Alunite samples related to the Au–(Ag) epithermal ores have been dated by the 40Ar/39Ar method at 11.3–11.6 Ma and those from the Cordilleran base metal ores in the northern part of the district (Smelter and Colquijirca) at 10.6–10.8 Ma. The significant time gap (~0.5 My) between the ages of the two mineralization types in the Colquijirca district indicates they were formed by different hydrothermal events within the same magmatic cycle. The estimated time interval between the younger mineralization event (base metal mineralization) at ~10.6 Ma and the ages of ~12.5 Ma obtained on biotites from unmineralized dacitic domes flanking the vicinity of the diatreme vent, suggest a minimum duration of the magmatic–hydrothermal cycle of around 2 Ma. This study on the Colquijirca district offers for the first time precise absolute ages indicating that the Cordilleran base metal lode and replacement deposits were formed by a late hydrothermal event in an intrusive-related district, in this case post Au–(Ag) high-sulfidation epithermal mineralization.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial handling: O. Christensen  相似文献   

10.
A study of the 933±32-Ma-old Bolangir massif-type anorthosite complex (Eastern Ghats Province, India) yielded strong evidence for anorthosite emplacement during regional shortening, and thereby new insights in massif-type anorthosite formation. Several lines of evidence strongly suggest synchronism of plutonism and regional deformation. First, structures in the country rocks, which imply N–S-directed shortening accompanied by E–W extension, are mirrored by a E–W trending post-magmatic foliation and N–S trending shear zones in the anorthosite complex. Near the intrusion, the foliation in the country rocks becomes parallel to the contact and an internal marginal foliation, and foliation triple points occur in the country rocks. Second, synshortening dikes inside and outside the anorthosite complex are filled with pluton-related melts. Third, ferrodiorites, which are considered late-stage differentiates of the anorthositic pluton, concentrate in tectonic voids at the pluton margin. Some of these occurrences have been affected by the last increments of the regional deformation, but others transect the same structures. Ascent mechanism and significance of the adjacent terrane boundary of the Eastern Ghats Belt for ascent and emplacement of the Bolangir anorthosite complex are discussed. The results of this study imply that emplacement of Proterozoic massif-type anorthosite is not restricted to extensional settings.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号